Complete workshop & service manual with electrical wiring diagrams for Case/IH Models 385, 485, 585, 685, 885, 5120, 5130, 5140 Tractors. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Case/IH Models 385, 485, 585, 685, 885, 5120, 5130, 5140 Tractors service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
Case_International Models 385, 485, 585, 685, 885 Series Shop Manual.pdf
Case_International Models 5120, 5130, 5140 Series Shop Manual.pdf
COOLING SYSTEM - RADIATOR
77. REMOVE AND REINSTALL. To remove the radiator, drain cooling system and disconnect front wiring harness. Remove hood, side panels and grille.
Disconnect and remove air intake duct. Unbolt and remove air cleaner and ether injector system. Unbolt and move air conditioning condenser, if so equipped, rearward and lay on engine. It is not necessary to disconnect the air conditioner lines from the condenser.
Identify hydraulic oil cooler lines, disconnect lines and remove oil cooler. Disconnect upper and lower radiator hoses. Attach a hoist to radiator supports and unbolt supports from front support. Slide radiator assembly forward so that shroud will clear fan as the assembly is removed. Unbolt and remove upper air baffle, fan shroud and coolant recovery
tank. Unbolt and remove radiator from supports.
Reinstall by reversing the removal procedure.
Make certain that all foam rubber seals and pads are correctly installed in their original positions. Refill radiator with coolant. On Model 5120 equipped with aftercooler, open bleed valve on aftercooler to remove air trapped in aftercooler. Coolant capacity is 17.6
liters (18 U.S. qt. ) for Model 5120 tractors and 20.8 liters (22 U.S. qt.) for Models 5130 and 5140. On Model 5120 with aftercooler, coolant capacity is 19.2 liters (20 U.S. qt.). A 105 kPa (15 psi) radiator cap is used on all models.