Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Hyundai Tucson 2004-2015. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.
This manual for Hyundai Tucson 2004-2015 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.
2014 ENGINE Intake And Exhaust System - 2.4L - Tucson
Removal and Installation
1. Remove the engine cover.
2. Disconnect the battery negative terminal.
3. Disconnect the front oxygen sensor connector (A) and the rear oxygen sensor connector (B).
4. Remove the front muffler. (Refer to MUFFLER)
5. Using the SST(09392-2H100) (A), remove the front oxygen sensor (B) and the remove the exhaust manifold heat protector (C).
Tightening torque: Oxygen sensor: 39.2 ~ 49.0 N.m (4.0 ~ 5.0 kgf.m, 28.9 ~ 36.2 lb-ft)
Heat protector bolts: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
6. Remove the exhaust manifold stay (A).
M8 : 18.6 ~ 27.5 N.m (1.9 ~ 2.8 kgf.m, 13.7 ~ 20.3 lb-ft)
M10 : 51.9 ~ 57.8 N.m (5.3 ~ 5.9 kgf.m, 38.3 ~ 42.6 lb-ft)