Complete factory shop manual including electrical wiring diagrams for 1969-1977 Kawasaki H-Series (H1, H2, KH500) Motorcycle. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page to save your precious time.

This repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

"'69-'77 H Series.pdf"
163 pages; Kawasaki 1969-1977 H-Series Motorcycle Shop Manual
H1 (1969-1975), KH500 (1976-1977), H2 (1972-1975)

EXCERPT:
4) Clutch Adjustment
a. First adjust the release lever angle as outlined below.
(I) Loosen lock nut B and back out grooved screw A about 3 or 4 turns to give release lever C ample play.
(2) Give the clutch hand lever play by loosening lock nut D and turning adjuster C, until the lever conforms with the measured position in the illustration.
(3) Loosen lock nut F and turn clutch cable adjuster E until the release lever is at the 80° angle shown in the illustration. Hold the adjustment with lock nut F.
Release Lever Adjustment
b. Next adjust the clutch itself. Turn in grooved screw A slowly until it suddenly becomes very hard to turn. This is where the clutch starts pushing on the screw and clutch operation begins.
Hold the adjustment at this position with lock nut B.
c. Last adjust clutch lever play to the standard given in the illustration, by turning clutch lever adjuster C and locking it in place with lock nut D.
Clutch Lever Adjustment
...