Complete workshop & service manual with electrical wiring diagrams for Ford E-Series 2003. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Ford E-Series 2003 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

· C35 — E-350 Super Duty chassis cab
· C45 — E-450 Super Duty chassis cab
· C55 — E-550 Super Duty chassis cab
· E11 — E-150 wagon
· E14 — E-150 van
· E24 — E-250 van
· E29 — E-250 stripped chassis
· E31 — E-350 wagon
· E34 — E-350 van
· E35 — E-350 base cutaway
· E39 — E-350 stripped chassis
· E45 — E-450 Super Duty cutaway
· E49 — E-450 Super Duty stripped chassis
· E55 — E-550 cutaway
· S24 — E-250 van (extended body)
· S31 — E-350 wagon (extended body)
· S34 — E-350 van (extended body)

· 2 — 4.2L, OHV, EFI, V6, Gas
· F — 7.3L, OHV, V8, diesel
· L — 5.4L, SOHC, EFI, V8, Gas
· M — 5.4L, SOHC, V8, compressed natural gas (CNG)
· S — 6.8L, SOHC, EFI, V10, Gas
· W — 4.6L, SOHC, EFI, V8, Gas

EXCERPT:
SECTION 307-01A: Automatic Transmission — 4R100 2003 E-Series Workshop Manual
DISASSEMBLY AND ASSEMBLY OF SUBASSEMBLIES
Main Control Valve Body —Solenoid Body Check
Disassembly
1. NOTE: Inspect and test the shift solenoids. Go To Pinpoint Test A.
NOTE: The solenoid body cannot be disassembled to clean and inspect for contamination.
Contamination is a major source of solenoid body failure. Install a new solenoid body anytime contamination is evident.
Clean and inspect the solenoid body.
· Check the connector pins for corrosion and possible bent condition.
· If large amounts of contamination are present a new solenoid body will need to be installed.
· Remove O-ring and discard.
· Install new O-ring and lubricate with petroleum jelly or equivalent.

Main Control Valve Body —Solenoid Body Check 2558
…