Complete workshop & service manual with electrical wiring diagrams for Nissan Almera Classic (B10) 2006-2014. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Nissan Almera Classic (B10) 2006-2014 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
Fuel Line Inspection
Make sure that fuel line, fuel filler cap and fuel tank are at- tached correctly. If there is tremble or dir, repair or replace them.
Removal • Installation
WARNING:
When replacing the fuel line part, observe the followings:
Put a “CAUTION: INFLAMMABLE” sign in the workshop.
Be sure to work in a well ventilated area and to furnish workshop with a CO2 fire extinguisher.
Do not smoke while working on the fuel system. Also, work in location without any fire.
WARNING:
Use the following procedure before removing the fuel line parts.
a) Drain engine oil to the anti-explosible container and close it tight.
b) Release fuel pressure from the fuel line. Refer to “FUEL PRESSURE RELEASE” (QG16: EC-26).
c) Disconnect the battery negative cable.
Always replace O-ring with a new one.
Do not install the fuel tube twisted.
Do not tighten the hose clamp excessively. The fuel hose can be damaged.
Make sure that there are no fuel leaks at the fuel system connections while the engine is running after installing the fuel tube.
a) Turn the ignition switch ON (engine not running) and generate the fuel pressure in the fuel line.
Also, make sure that are no fuel leaks at the connec- tions.
b) Start engine, rev it up and make sure there are no fuel leaks at the fuel system connections.
Use only NISSAN Geunuine part when replacing the fuel filler cap.
…