Complete workshop & service manual with electrical wiring diagrams for Buell Ulysses Motorcycle 2007. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Buell Ulysses Motorbike service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
2007 BUELL ULYSSES
SERVICE MANUAL
Part Number 99494-07Y
Section 1: Maintenance
Section 2: Chassis
Section 3: Engine
Section 4: Fuel System
Section 5: Starter
Section 6: Drive/Transmission
Section 7: Electrical
Appendices
…
SUBJECT PAGE NO.
3.1 Specifications . . . . 3-1
3.2 Engine . . . . 3-6
3.3 Engine Rotation for Service . . . 3-8
3.4 Stripping Motorcycle for Engine Service . . . . . 3-18
3.5 Engine Installation . . . . 3-29
3.6 Cylinder Head . . . . 3-43
3.7 Cylinder and Piston . . . 3-61
3.8 Lubrication System . . . 3-71
3.9 Oil Hose Routing and Oil Reservoir . . . 3-72
3.10 Oil Line Fittings . . . . . 3-73
3.11 Oil Cooler . . . . 3-75
3.12 Oil Pressure Indicator Switch . . . 3-78
3.13 Crankcase Breathing System . . . 3-80
3.14 Oiling System . . . 3-82
3.15 Oil Pump . . . . 3-83
3.16 Oil Filter Mount . . . . . 3-86
3.17 Hydraulic Lifters . . . . . 3-87
3.18 Gearcase Cover and Cam Gears . . . 3-89
3.19 Crankcase . . . 3-94
…
INSTALLATION
1. Install oil line fittings with o-ring into swingarm and
tighten to 108-156
in-lbs
(12-17.6 Nm).
2. SEE Figure 3-109. Push the correct flanged oil line into
the correct fitting in the swingarm until each one clicks in
place under the spring clip.
3. Lightly tug on oil line to verify that it is securely locked to
fitting and the spring clip is seated in the oil line fitting
groove.
4. Check oil level and add oil if required.
5. After running engine,
a. Inspect oil fittings for oil leaks.
b. Check oil level and add oil if required.
Figure 3-109. Flanged Oil Line
…