Complete workshop repair & service manual with electrical wiring diagrams for Perkins 1300/1506A/1506C/1600 Series Engines. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Perkins 1300/1506A/1506C/1600 Series Engines service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

KENR8771 - Specifications (1600 Series Industrial Engine).pdf
KENR8772 - Systems Operation_Testing & Adjusting (1600 Series Industrial Engine).pdf
KENR8773 - Disassembly & Assembly (1600 Series Industrial Engine).pdf
KENR8774 - Troubleshooting (1600 Series Industrial Engine).pdf
KENR8775 - Schematic (1600 Series Industrial Engine Electrical System).pdf
SEBU8455 - Operation & Maintenance Manual (1600 Series Industrial Engine).pdf
SEBU9070 - Operation & Maintenance Manual (1506A-E88TA & 1506C-E88TA Industrial Engines).pdf
TPD1303EFG - User's H&book (1300 Series (WK to WS) 6 Cylinder Diesel Engines for Agricultural & Industrial Uses).pdf
TPD1307E - Power Service Workshop Manual (Peregrine_6 cylinder diesel engines for automotive applications & 1300 Series_6 cylinder diesel engines for agricultural & industrial applications).pdf
TPD1314E4 - User's H&book (Perkins Peregrine Models WG & WJ_Six cylinder turbocharged diesel engines for automotive applications).pdf
TPD1315E6 - User's H&book (1300 Series Models WF to WJ_Six cylinder turbocharged diesel engines for industrial & agricultural applications).pdf
TPD1347E2 - Workshop Manual (Peregrine (6 cylinder diesel engines for automotive applications) & New Generation 1300 Series (6 cylinder diesel engines for agricultural & industrial applications)_Models WD to WJ).pdf
TPD1352E4 - User's H&book (1300 Series 6 Cylinder, Turbocharged, Diesel Engines with an Electronic Management System for Industrial & Agricultural Uses).pdf
TPD1353E3 - Workshop Manual (Peregrine EDi & 1300 Series EDi (WK to WS) 6 Cylinder Turbocharged Diesel Engines with Electronic Management System for Automotive, Agricultural & Industrial Uses).pdf
TPD1357E1 - Service Data Booklet Part 1_Mature products up to 8,85 litres (540 cu in) (4.108_3.152 Series_4.203 Series_4.236 Series_6.3544 Series_V8.540 Series).pdf
TPD1360E2 - User’s H&book (Peregrine EDi (WL, WN, WQ, WS) 6 Cylinder, Turbocharged, Diesel Engines with Electronic Management System for Automotive Uses).pdf
TPD1361E1 - Perkins Service Data Booklet Part 2_Current products up to 8,7 litres (530 cu in) (100 Series_4.41_Prima_500 Series_700 Series_900 Series_Phaser_1000 Series_Peregrine_1300 Series).pdf
UENR4451 - Schematic (1506A & C Industrial Engines Electrical System).pdf
UENR4509 - Specifications (1506A-E88TA & 1506C-E88TA Industrial Engines).pdf
UENR4510 - Systems Operation_Testing & Adjusting (1506A-E88TA & 1506C-E88TA Industrial Engines).pdf
UENR4511 - Disassembly & Assembly (1506A-E88TA & 1506C-E88TA Industrial Engines).pdf
UENR4512 - Troubleshooting (1506A-E88TA & 1506C-E88TA Industrial Engines).pdf

EXCERPT:
Chapters
1 General information
2 Specifications
3 Cylinder head assembly
4 Piston and connecting rod assemblies
5 Crankshaft assembly
6 Timing case and drive assembly
7 Cylinder block assembly
8 Engine timing
9 Aspiration system
10 Lubrication system
11 Fuel system
12 Cooling system
13 Flywheel and housing
14 Electrical equipment
15 Auxiliary equipment
16 Special tools
...
To fit Operation 6-4
Caution: Ensure that the piston of number 1 cylinder is set to TDC.
1 Lubricate the bearings of the idler gears with clean engine lubricating oil.
2 Lightly lubricate the threads and shoulder of the setscrew for the lower idler gear with clean engine lubricating oil.
3 Put the lower idler gear (A5) in position in mesh with the crankshaft gear (A6) so that the timing marks align (A).
4 Fit and tighten the setscrew to 673 Nm (470 lbf ft) 65,6 kgf m.
5 Ensure that the thread in the cylinder block for the setscrew of the upper idler gear is clean and dry.
Note: The setscrew for the upper idler gear (A2) is supplied with a sealant on its thread. Do not add more sealant to the thread of the setscrew. Do not put lubricating oil on the thread of the setscrew.
6 Put the upper idler gear in position in mesh with the camshaft gear (A1), the lower idler gear and the fuel injection pump gear (A4). Ensure that the timing marks (A) align on the upper idler gear, the camshaft gear, the crankshaft gear and the lower idler gear. Ensure that the fuel injection pump gear is fitted correctly.
Note: There are no timing marks on the fuel pump gear. The centre hole (A3) in the group of three holes in the gear face must be at the 10 o’clock position, for correct timing of the fuel injection pump.
7 Fit and tighten the new setscrew for the upper idler gear to 325 Nm (240 lbf ft) 33,2 kgf m.
8 Check that the backlash of the gears is still within tolerance. Renew any gear that is out of tolerance.
9 Fit the timing case cover, see Operation 6-2.
10 Fill the cooling system to the correct level.
...