Complete workshop & service manual with electrical wiring diagrams for JCB Wheeled Loading Shovel (WLS) 432ZX. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This JCB Wheeled Loading Shovel (WLS) 432ZX service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

FILELIST:
550-43477-1 - JCB Wheeled Loading Shovel (WLS) 432ZX Service Manual.pdf
9813-0800-4 - JCB Wheeled Loading Shovel (WLS) 432ZX Service Manual.pdf

EXCERPT:
Service Manual
WLS 432ZX
Service Manual - WLS 432ZX
Section 1 - General Information
Section 2 - Care and Safety
Section 3 - Routine Maintenance
Section B - Body and Framework
Section C - Electrics
Section E - Hydraulics
Section F - Transmission
Section G - Brakes
Section H - Steering
Section K - Engine
...
Loader Valve - Arms Raise/Lower
When the raise operation is selected, servo-pressure is applied to the Loader Valve section LV1 and the spool A is moved from the neutral position. Oil is sent to the waisted section at B through an open load check valve at C to port B. From port B the oil is sent to the ram. Simultaneously the line from the rod side of the ram enters the loader valve at port A and is connected to exhaust at D. The rams extend and raise the arms.
When the lower operation is selected, servo-pressure moves the spool so that the pressure and return line galleries are interchanged. Pressure oil is sent from port A and port B is connected to the exhaust. The rams retract to give a controlled lowering of the arms.
...