Logo

Cart

Click title to display cart contents.
0 Items $0.00

John Deere 310J Backhoe Loader Technical Manual (Operation & Test) (TM10846)

Catalog: 

Make: 

Model: 

US Dollar: $65.00

Complete Technical manual (Operation & Test Manual) for John Deere 310J Backhoe Loader. It's the same manual used by dealers that guaranteed to be fully functional and intact without any missing page. This service manual divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAIN SECTIONS
 Foreword
   Technical Information Feedback Form
   General Information
      Safety Information
   Diagnostics
      Engine Control Unit (ECU)
      Flex Load Controller (FLC)
      Standard Display Monitor (SDM)
   Operational Checkout Procedure
      Operational Checkout Procedure
   Engine
      Theory of Operation
      Diagnostic Information
      Adjustments
      Tests
   Electrical System
      System Information
      System Diagrams
      Sub-System Diagnostics
      Monitor Operation
      References
   Power Train
      Theory of Operation
      Diagnostic Information
      Adjustments
      Tests
   Hydraulic System
      Theory of Operation
      Diagnostic Information
      Adjustments
      Tests
   Heating and Air Conditioning
      Theory of Operation
      Diagnostic Information
      Tests

 

TM10846 - John Deere 310J Backhoe Loader (S.N. 159760- ) Technical Manual (Operation & Test).pdf
TM10846 - John Deere 310J Backhoe Loader (S.N. 159760- ) Technical Manual (Operation & Test).epub

Total Pages: 1,145 pages
File Format: PDF/EPUB/MOBI/AZW (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

TABLE OF CONTENTS - Expanded View
9000 - General Information
   01 - Safety
       Add and Operate Attachments Safely
       Avoid Backover Accidents
       Avoid High-Pressure Fluids
       Avoid High-Pressure Oils
       Avoid Machine Tipover
       Avoid Unauthorized Machine Modifications
       Avoid Work Site Hazards
       Beware of Exhaust Fumes
       Dispose of Waste Properly
       Drive Metal Pins Safely
       Follow Safety Instructions
       Handle Chemical Products Safely
       Inspect and Maintain ROPS
       Inspect Machine
       Keep Riders Off Machine
       Make Welding Repairs Safely
       Operate Only If Qualified
       Operating or Traveling On Public Roads
       Park and Prepare for Service Safely
       Prepare for Emergencies
       Prevent Battery Explosions
       Prevent Fires
       Prevent Unintended Detonation of Explosive Devices
       Prevent Unintended Machine Movement—If Equipped With Pilot Controls
       Prevent Unintended Machine Movement
       Recognize Safety Information
       Remove Paint Before Welding or Heating
       Service Cooling System Safely
       Service Tires Safely
       Start Only From Operator's Seat
       Stay Clear of Moving Parts
       Use and Maintain Seat Belt
       Use Special Care When Operating
       Use Steps and Handholds Correctly
       Wear Protective Equipment
9001 - Diagnostic Trouble Codes (DTC)
   10 - Engine Control Unit (ECU) Diagnostic Trouble Codes
      000029.03 — Engine Speed Control Short Circuit
      000029.04 — Engine Speed Control Open Circuit
      000029.14 — Engine Speed Control Out of Range
      000091.03 — Foot Throttle Position Sensor Short Circuit
      000091.04 — Foot Throttle Position Sensor Open Circuit
      000091.14 — Foot Throttle Position Sensor Out of Range
      001075.05 — Fuel Lift Pump Relay Open Circuit
      001075.06 — Fuel Lift Pump Relay Short Circuit
      001321.05 — Starter Relay Open Circuit
      001321.06 — Starter Relay Short Circuit
      001321.16 — Crank Cycle Too Long
      002023.09 — Hand Throttle Message Missing (Landscape Loader Only)
      002047.09 — Can Communication Lost with FLC
      002071.09 — Hand Throttle Message Missing (Backhoe Only)
      523702.09 — Flex Power Message Missing
      Engine Control Unit (ECU) Diagnostic Trouble Codes
   20 - Flex Load Controller (FLC) Diagnostic Trouble Codes
      000069.07 — MFWD Logic Error
      000070.02 — Park Brake Switch (S7) Open Circuit
      000070.04 — Park Brake Switch (S7) Short to Ground
      000070.07 — Park Brake Switch (S7) Logic Error
      000117.19 — Service Brake Pressure Low
      000234.02 — Software Revision Mismatch
      000525.03 — TCL _ Range Switch (S5) Gear Range Input Shorted to Power
      000525.04 — TCL_Range Switch (S5) Gear Range Input Voltage Low
      000525.05 — TCL _ Range Switch (S5) Gear Range Input Open Circuit
      000525.12 — TCL_Range Switch (S5) Gear Range Input Logic Error
      000734.05 — Transmission Solenoid (Y1) Open Circuit
      000735.05 — Transmission Solenoid (Y2) Open Circuit
      000736.05 — Transmission Solenoid (Y3) Open Circuit
      000737.12 — Transmission Solenoid (Y4 or Y5) Fault
      000738.05 — Transmission Solenoid (Y5) Open Circuit
      000739.12 — Transmission Solenoid (Y2 or Y6) Fault
      000741.12 — Transmission Solenoid (Y1 or Y3) Fault
      000746.07 — Differential Lock Switch (S4) Logic Error
      000746.12 — Differential Lock Switch (S4) Short to Power or Ground
      000757.05 — Transmission Solenoid (Y4) Open Circuit
      000759.05 — Transmission Solenoid (Y6) Open Circuit
      001504.05 — Seat Swivel Latch Switch (S18) Short to Ground
      001714.04 — Seat Position Front Switch (S17) Short to Ground
      001714.07 — Seat Position Rear Switch (S16) and Seat Position Front Switch (S17) Logic Mismatch
      001714.10 — Seat Position Front Switch (S17) Short Circuit to Power or Stuck Closed
      001715.04 — Seat Position Rear Switch (S16) Short to Ground
      002000.09 — CAN Communication Lost with ECU
      002023.09 — CAN Communication Lost with SDM
      002228.09 — CAN Communication Lost with FHC
      002368.12 — Left Turn Signal Driver Output Fault
      002370.12 — Right Turn Signal Driver Output Fault
      002580.07 — Service Brake Pressure Switch Status Error
      002605.12 — Brake Charge Solenoid (Y59) Circuit Fault
      002875.04 — 4-Way Flasher Switch (S31) Input Short to Ground
      002876.12 — Conflicting Turn Signal Switch (S30) Data
      003413.04 — Right Door Switch (S99) Input Short to Ground
      003416.03 — Right Exit Switch (S99) Circuits Short to Power
      003416.04 — Right Exit Switch (S99) Circuits Short to Ground
      003416.05 — Right Exit Switch (S99) Open Circuit
      298816.14 — Park Brake Did Not Apply When Commanded
      522371.04 — FLC Valve Power #5 Voltage Low
      522379.12 — Park Brake Release Solenoid (Y7) Fault
      522398.14 — Park Brake Did Not Release When Commanded
      522411.03 — TCL _ Range Switch (S5) Input Voltage High
      522411.04 — TCL_Range Switch (S5) Input Voltage Low
      523218.03 — FLC Valve Power #2 Output Stuck ON
      523218.04 — FLC Valve Power #2 Output Stuck OFF
      523218.05 — FLC Valve Power #2 Output Voltage Low
      523219.04 — FLC Valve Power #1 Voltage Low
      523702.02 — Flex Power Status Erratic
      523702.07 — Flex Power Not Active
      523702.08 — Flex Power Time Out
      523702.09 — Flex Power ECU Authentication Error
      523702.10 — Flex Power Watch Dog Error
      523702.13 — Flex Power Mismatch
      523911.12 — Hydraulic Pump Control Solenoid (Y56) Fault
      523948.12 — Ride Control Solenoid 1 (Y50) or 2 (Y51) Fault
      524070.04 — Valve Power # 6 Voltage Low
      524075.04 — Valve Power # 5 Voltage Low
      524172.00 — Clutch Disconnect Switch Stuck Closed
      524172.04 — Switch Short to Ground
      524172.07 — Clutch Disconnect Device Fault
      524235.12 — MFWD Solenoid (Y11) Output Fault
      Flex Load Controller (FLC) Diagnostic Trouble Codes
   30 - Standard Display Monitor (SDM) Diagnostic Trouble Codes
       000096.03 — Fuel Level Sensor (B8) Input Voltage Low
       000096.04 — Fuel Level Sensor (B8) Input Voltage High
       000100.01 — Engine Oil Pressure Low
       000100.05 — Engine Oil Pressure Switch Open
       000107.00 — Engine Air Filter Restricted
       000117.01 — Service Brake Pressure Low
       000158.00 — System Voltage High
       000158.01 — System Voltage Low
       000177.00 — Torque Converter Oil Temperature High
       000177.03 — Torque Converter Oil Temperature Sensor (B6) Input Voltage High
       000177.04 — Torque Converter Oil Temperature Sensor (B6) Input Voltage Low
       000234.02 — Software Revision Mismatch
       000920.03 — SDM Alarm (H2) Output Voltage High
       000920.04 — SDM Alarm (H2) Output Voltage Low
       001045.04 — Brake Light SW
       001196.11 — Antitheft Lock Status Not Detected From ECU
       001201.11 — Antitheft Unlock Status Not Detected From ECU
       001508.00 — Hydraulic Oil Temperature Moderately High
       001508.03 — Hydraulic Oil Temperature Sensor (B10) Input Voltage High
       001508.04 — Hydraulic Oil Temperature Sensor (B10) Input Voltage Low
       001508.16 — Hydraulic Oil Temperature High
       001713.00 — Hydraulic Oil Filter Restricted
       002000.09 — CAN Communication Lost with ECU
       002003.09 — CAN Communication Lost with FLC
       002071.09 — CAN Communication Lost with Other Controller
       002228.09 — CAN Communication Lost with FHC
       523569.04 — FLC Switched and _ or Unswitched Power Open Circuit
       523649.04 — CAN Communication Lost with Hydraulic Controllers
       523650.04 — CAN Communication Lost with FHC
       523662.04 — FHC Valve Power Circuit Voltages Low
       Standard Display Monitor (SDM) Diagnostic Trouble Codes
9005 - Operational Checkout Procedure
   10 - System Operational Checks
       Operational Checkout Procedure
9010 - Engine
   Air in Fuel Test
   Air Intake System Leakage Test
   Engine Cooling System Component Location
   Engine Cooling System
   Engine Fuel System Component Location
   Engine Identification
   Engine Intake and Exhaust Component Location
   Engine Speed Check
   Engine Thermostat Test
   Fluid Sampling Procedure—If Equipped
   Intake Manifold Pressure—Turbocharger Boost
   PowerTech™ and PowerTech E™ 4.5L (4045) John Deere Engines
   PowerTech™ and PowerTech E™ 4.5L (4045) John Deere Engines
   Thermal Bypass Valve Test
9015 - Electrical System
   05 - System Information
      Electrical Diagram Information
      Electrical Schematic Symbols
   10 - System Diagrams
      Air Conditioning Harness (W16) Component Location
      Air Conditioning Harness (W16) Wiring Diagram
      Cab Harness (W10) Component Location
      Cab Harness (W10) Wiring Diagram
      Canopy (ROPS) Harness (W5) Component Location
      Canopy (ROPS) Harness (W5) Wiring Diagram
      Diode Suppression Harness (W33) Component Location—If Equipped
      Diode Suppression Harness (W33) Wire Diagram—If Equipped
      Engine Harness (W7) Component Location
      Engine Harness (W7) Wiring Diagram
      Fuse and Relay Location and Specifications
      JDLink™ System Functional Schematic—MIG _ GTT
      JDLink™ System Functional Schematic—MTG _ SAT
      JDLink™ System Harnesses Component Location—MIG _ GTT
      JDLink™ System Harnesses Component Location—MTG _ SAT
      JDLink™ System Wiring Diagrams—MIG _ GTT
      JDLink™ System Wiring Diagrams—MTG _ SAT
      Loader Coupler Harness (W21, W22) Component Location
      Loader Coupler Harness (W21, W22) Wiring Diagram
      Pilot Control Harness (W23, W24) Component Location (S.N. —178748)
      Pilot Control Harness (W23, W24) Wiring Diagram (S.N. —178748)
      Pilot Control Harness (W24, W47, W48) Component Location (S.N. 178749— )
      Pilot Control Harness (W24, W47, W48) Wiring Diagram (S.N. 178749— )
      Radio Harness (W20) Component Location
      Radio Harness (W20) Wiring Diagram
      Return-to-Dig Harness (W25) Component Location
      Return-to-Dig Harness (W25) Wiring Diagram
      Ride Control Harness (W18 and W19) Wiring Diagram
      Ride Control Harness (W18, W19) Component Location
      Roof Harness (W15) Component Location
      Roof Harness (W15) Wiring Diagram
      Selective Flow Control Harness (W17) Component Location
      Selective Flow Control Harness (W17) Wiring Diagram
      System Functional Schematic and Section Legend
      System Functional Schematic and Section Legend—Stage II Engine
      System Functional Schematic, Wiring Diagram, and Component Location Legend
      System Functional Schematic, Wiring Diagram, and Component Location Legend—Stage II Engine
      Transmission Harness (W9) Component Location
      Transmission Harness (W9) Wiring Diagram
      Water-in-Fuel (WIF) Harnesses (W40, W41) Component Location
      Water-in-Fuel (WIF) Harnesses (W40, W41) Wiring Diagram
   15 - Sub-System Diagnostics
      Controller Area Network (CAN) Circuit Theory of Operation
      Engine Control Unit (ECU) Circuit Theory of Operation
      Engine Control Unit (ECU) Circuit Theory of Operation—Stage II Engine
      Flex Load Controller (FLC) Circuit Theory of Operation
      JDLink™ Circuit Theory of Operation—If Equipped
      Standard Display Monitor (SDM) Circuit Theory of Operation
      Start and Charge Circuit Theory of Operation
      Start and Charge Circuit Theory of Operation—Stage II Engine
   16 - Monitor Operation
      Anti-Theft Security System Configuration
      Anti-Theft Security System Enable _ Disable
      Anti-Theft Security System Operation
      Standard Display Monitor (SDM)—Clear Codes
      Standard Display Monitor (SDM)—Diagnostics
      Standard Display Monitor (SDM)—Hide _ Unhide Main Menu
      Standard Display Monitor (SDM)—Machine Options
      Standard Display Monitor (SDM)—Restore Monitor Defaults
      Standard Display Monitor (SDM)—Service Menu
      Standard Display Monitor (SDM)—Setting Hour Meter
   20 - References
       Alternator Test Procedure
       CINCH™ Connector Remove and Install
       CINCH™ Contact Installation
       CINCH™ CP Connector Remove and Install
       CINCH™ CP Contact Installation
       Controller Area Network (CAN) Circuit Test
       Controller Area Network (CAN) Resistor Test
       Crank Position Sensor Test
       DEUTSCH® Connector Remove and Install
       DEUTSCH® Contact Installation
       Diagnostic Trouble Code (DTC) Monitor Messages
       Electrical Component Specifications
       Flex Load Controller (FLC) Output Test
       Intermittent Diagnostic Trouble Code (DTC) Diagnostics
       JDLink™ Connection Procedure—If Equipped
       JDLink™ System Identification
       Metri-Pack® Connector Remove and Install
       Reading Diagnostic Trouble Codes (DTCs)
       Seat Position Switches Remove and Install
       Sensor Circuit Check
       Service ADVISOR™ Connection Procedure
       Throttle Position Sensor Test
       Transmission Control Circuit Test
       Transmission Control Lever (TCL) Test
       Transmission Solenoid Check
       Transmission Solenoid Circuit Test
       WEATHER PACK® Connector Remove and Install
       WEATHER PACK® Contact Installation
       Wire Harness Test
9020 - Power Train
   05 - Theory of Operation
      Clutch and Mechanical Front Wheel Drive (MFWD) Operation
      Clutch Modulation Operation
      Differential Lock Operation
      Differential Operation
      MFWD Differential Operation—Equal Traction—If Equipped
      MFWD Differential Operation—Unequal Traction
      MICO Power Boost Brake Valve—Both Pedals Applied, Engine Off Position
      MICO Power Boost Brake Valve—Both Pedals Applied Position
      MICO Power Boost Brake Valve—Neutral Position
      MICO Power Boost Brake Valve—One Pedal Applied Position
      Park Brake Operation
      Power Shift Power Train Overview
      Power Shift Transmission Clutch Engagement and Solenoids Activated
      Power Shift Transmission Gear Flow
      Service Brake Operation
      Torque Converter Operation
      Transmission Filter Operation
      Transmission Pump Operation
   15 - Diagnostic Information
      Diagnose Transmission Malfunctions
      Diagnose Transmission Malfunctions
      Differential Lock Slips or Chatters When Engaged
      Differential Lock Will Not Release
      Excessive Power Train Noise
      Hydraulic Circuit—Symbols
      Machine Lacks Power or Moves Slow
      No Differential Lock Operation
      No Power to Mechanical Front Wheel Drive (MFWD)
      No Power to One Wheel of Mechanical Front Wheel Drive (MFWD)
      Park Brake Piston Leak
      Park Brake Will Not Hold
      Park Brake Will Not Release
      Poor Service Brakes
      Power Train Component Location
      Power Train Schematic—First Forward Mechanical Front Wheel Drive (MFWD) Engaged
      Power Train Schematic—First Reverse
      Power Train Schematic—Fourth Forward
      Power Train Schematic—Neutral
      Rear Axle Overfilled With Oil
      Service Brakes Chatter or Noisy
      Service Brakes Will Not Release
      Transmission Overheats
      Transmission Slippage
   20 - Adjustments
      Brake Bleeding Procedure
      Brake Pedal Adjustment
      Park Brake Release for Towing
      Steering Angle Check and Adjust
      Toe-In Check and Adjust
      Tracking Angle Check and Adjust
   25 - Tests
       Brake Valve Leakage Test
       Clutch Pressure Test
       Cooler In and Cooler Out Pressure Test
       Differential Lock Pressure Test
       Mechanical Front Wheel Drive (MFWD) Pressure Test
       Park Brake Release Pressure Test
       Power Shift Transmission Overall Test Connections, Ports, and Locations
       Solenoid Circuit Leakage Test
       Torque Converter-In Relief Valve Test
       Torque Converter Stall Speed Test
       Transmission Oil Sampling Procedure—If Equipped
       Transmission Oil Warm-Up Procedure
       Transmission Pump Flow Test
       Transmission System Pressure Test
9025 - Hydraulic System
   05 - Theory of Operation
      Attachment Coupler Hydraulic Operation
      Backhoe Control Valve Boom Section—Boom Lower Position
      Backhoe Control Valve Boom Section—Boom Raise Position (Pilot Control)
      Backhoe Control Valve Bucket Section—Bucket Curl Position
      Backhoe Control Valve Crowd Section—Crowd Out Position
      Backhoe Control Valve Extendable Dipperstick Section—Neutral Position with Upstream Function Activated
      Backhoe Control Valve Selective Auxiliary Flow Section—If Equipped
      Backhoe Control Valve Swing Section—Swing Left Position
      Circuit Relief Valve with Anticavitation—Backhoe Bucket Curl and Loader Bucket Dump
      Circuit Relief Valve with Anticavitation—Backhoe Swing, Boom Lower
      Circuit Relief Valve without Anticavitation—Loader and Backhoe
      Hydraulic Filter Operation
      Hydraulic Pump Operation
      Hydraulic System Operation
      Hydraulic System Schematic
      Hydraulic Thumb Operation—If Equipped
      Loader and Stabilizer Control Valve Operation
      Pattern Select Valve Operation (S.N. —178748)
      Pilot Control Manifold Valve Operation (S.N. —178748)
      Pilot Control Valve Operation
      Pilot Enable and Pattern Select Valve Operation (S.N. 178749— )
      Priority Valve Operation
      Ride Control Hydraulic Circuit Component Location and Valve Operation
      Steering Valve Operation
      System Relief Valve Operation
   15 - Diagnostic Informtion
      Attachment Coupler Hydraulic Component Location
      Attachment Coupler Hydraulic Component Location
      Attachment Coupler Not Working
      Control Valve Sticks or Works Hard
      Engine Pulls Down Excessively During Backhoe Operation
      Engine Pulls Down Excessively During Loader Operation
      Erratic (“Spongy”) Steering
      Excessive Pump Noise
      Excessive Steering Wheel Turns To Steer Machine
      Excessive Vibration of the Steering Wheel
      Foaming Oil
      Functions Drift
      Hard Steering, Loader Hydraulics OK
      Hydraulic Function Makes Chattering Noise
      Hydraulic Oil Overheats
      Hydraulic Pump Leaking
      Hydraulic System Component Location
      Hydraulic System Schematic
      Loader or Backhoe Operates Slowly in One Function
      Low Hydraulic Power (Low Hydraulic Pressure)
      Low Hydraulic Power
      Low Loader Hydraulic Power
      Machine Turns in Opposite Direction
      Machine Turns when Steering Valve is in Neutral
      No Loader Hydraulics
      No Loader or Backhoe Power in One Function
      No Loader or Steering Hydraulics
      No Response when Steering Wheel is Turned, Loader Hydraulics OK
      No Steering Hydraulics, Loader Hydraulics OK
      Poor Centering of Steering Wheel (Wheels Continue to Move After Steering Wheel is Stopped)
      Slow Hydraulic Functions
      Slow Loader and Backhoe Hydraulics
      Slow Steering Hydraulics
      Steering Valve Does Not Return to Neutral
      Steering Wheel Kickback
      Steering Wheel Locks Up
      Steering Wheel or Front Wheels Slowly Turn by Themselves When Using Backhoe or Loader
      Steering Wheel Turns Apply Rear Axle Service Brakes
      Steering Wheel Turns Freely With No Resistance or Action On Steered Wheels
      Steering Wheel Turns With Slight Resistance and No Action On Steered Wheels
      Wander—Vehicle Will Not Stay in a Straight Line
   20 - Adjustments
      Auxiliary Flow Control Valve Adjustment—If Equipped
      Backhoe Control Lever to Valve Linkage (Four Lever) Adjustment—If Equipped
      Backhoe Control Lever to Valve Linkage (Two Lever) Adjustment
      Loader Bucket Self-Leveling Linkage and Return-To-Dig Switch Adjustment
      Loader Lever and Stabilizer Lever Adjustment
      Pilot Control Manifold Valve Accumulator Discharge Procedure
      Pilot Control Pressure Adjustment
      Pilot Enable and Pattern Select Valve Accumulator Discharge Procedure
      Ride Control Accumulator Charge Check Procedure
      Ride Control Accumulator Charge Procedure
      Ride Control Accumulator Hydraulic Pressure Release Procedure
   25 - Tests
       Backhoe Relief Valve Pressure Test
       Circuit Relief Valve Test—With Remote Pump
       Function Drift Test
       Hydraulic Circuit Pressure Release
       Hydraulic Cylinder Leakage Test
       Hydraulic Oil Cooler Restriction Test
       Hydraulic Oil Sampling Procedure—If Equipped
       Hydraulic Oil Warmup Procedure
       Hydraulic Pump Flow Test
       JT02156A Digital Pressure and Temperature Analyzer Kit Installation
       Loader and Stabilizer Control Valve Lockout Leakage Test
       Loader Relief Valve Pressure Test
       Pilot Control Accumulator Charge Pressure Test
       Pilot Control Pressure Test
       Steering Cylinder Leakage Test
       Steering Load Sense Relief Valve Pressure Test
       Steering System Leakage Test
9031 - Heating and Air Conditioning
   05 - Theory of Operation
      Air Conditioning Circuit Operational Information
      Air Conditioning Circuit Specifications
      Air Conditioning Circuit Theory of Operation
      Binary Pressure Switch Operation
      Compressor Relief Valve Operation
      Expansion Valve Operation
      Freeze Control Switch Operation
      Heater Blower Circuit Operational Information
      Heater Blower Circuit Theory of Operation
      Proper Refrigerant Handling
      R134a Refrigerant—Cautions
      R134a Refrigerant Theory Of Operation
      Receiver _ Dryer Operation
      Temperature Control Operation
   15 - Diagnostic Informtion
   20 - Adjustments
      Air Conditioner Does Not Cool Interior of Cab
      Air Conditioner Runs Constantly, Too Cold
      Air Conditioning System Does Not Operate
      Heater Does Not Warm Interior of Cab
      Heater System Does Not Operate
      Interior Windows Continue to Fog
   25 - Tests
       Air Conditioning Switch Test
       Air Conditioning System Leak Test
       Binary Pressure Switch Test
       Blower Resistor Test
       Blower Switch Test
       Compressor Clutch Coil Test
       Expansion Valve Operation Test
       Freeze Control Switch Test
       Heater Blower Motor Test
       Operating Pressure Diagnostic Chart
       Proper Refrigerant Handling
       R134a Air Conditioning System Test
       R134a Refrigerant Cautions
       Refrigerant Hoses And Tubing Inspection
       Refrigerant Hoses And Tubing Inspection
External_Files
   M44215 - Component Technical Manual
   T102655 - Park Brake Adjustment
   T102956 - Function Drift Check Points
   T102957 - Swing Cylinder Drift Check Point
   T117309 - Measure Bucket Pivot Pin-To-Ground Clearance
   T132566 - Return-To-Dig Switch Adjustment
   T132733 - R134a Refrigerant Recovery, Recycling and Charging Station
   T132733 - R134a Refrigerant Recovery, Recycling, and Charging Station
   T133858B - Air Conditioning Compressor Clutch Coil
   T133889B - Blower Resistor Test
   T134625 - Pedal Stop
   T134626 - Brake Pedals
   T141891 - Operating or Traveling On Public Roads
   T143000 - Electrical Schematic Symbols
   T159775 - Ride Control Solenoid
   T160372 - Self-Leveling Linkage Adjustment
   T189644 - Tracking Angle Adjustment
   T213073 - Roof Harness (W15) Component Location
   T215512 - Engine Harness (W7) Component Location (S.N. —150725)
   T215521 - Air Conditioning Harness (W16) Component Location
   T215523 - Radio Harness (W20) Component Location
   T6171AL - Position Machine On Gradual Slope
   T6222AL - Rod End Cylinder Port Leakage Measurement
   T6222AM - Backhoe Cylinder Drift
   T6222AN - Stabilizer Cylinder
   T6222AN - Stabilizer Cylinder With Dial Indicator Installed
   T6264AI - Toe-In
   T6295AD - Differential Lock Check
   T6382JW - Toe-In Measurement
   T7751GM - Common Charging Circuit
   T8104AE - Receiver
   T8104AF - Slight Glass and Wet
   T8274AQ - Air Conditioning Switch
   T8426AD - Pressure Switch
   T8543AI - JT02156A Digital Pressure and Temperature Analyzer Kit
   TS700 - Hydraulic Circuit Symbols
   TX1002661 - Ride Control Switch
   TX1002663 - Auto-Idle
   TX1003146 - Standard Display Monitor (SDM) RPM Display
   TX1003148 - Neutral on Display
   TX1003149 - 1F
   TX1003150 - 1R Display
   TX1003174 - Transmission Control Lever (TCL)
   TX1003175 - 1R Gearshift Lever
   TX1003176 - Gearshift Detent
   TX1003182 - Park Brake Indicator
   TX1003184 - Speed Control Knob
   TX1007832 - Brake Pedal Adjustment
   TX1011385 - Engine Fuel System Components (Left Side of Engine)
   TX1011391 - Engine Fuel System Components (Right Side of Engine)
   TX1011405 - Engine Cooling System Components
   TX1011405 - Engine Cooling System—Stage II Engine
   TX1011437 - Engine Intake and Exhaust Components
   TX1011437 - Engine Intake and Exhaust Components—Stage II Engine
   TX1011957 - Engine Harness (W7) Wiring Diagram (S.N. —150756)
   TX1011978 - Overall Component Location
   TX1011979 - Brake and Steering Controls
   TX1011980 - Backhoe Controls
   TX1011981 - Attachment Coupler
   TX1011982 - Main Hydraulic Components
   TX1011983 - Loader Controls
   TX1012148 - Roof Harness (W15) Wiring Diagram
   TX1012185 - Differential Lock Pressure Test
   TX1012212 - Ride Control Solenoid Harness (W18) Wiring Diagram
   TX1012237 - Selective Flow Control Harness (W17) Wiring Diagram
   TX1012246 - Loader Coupler Solenoid Harness (W22) Wiring Diagram
   TX1012271 - Pilot Control Cab Harness (W23) Wiring Diagram
   TX1012292 - Pilot Control Console Harness (W24) Wiring Diagram
   TX1012398 - Non Powered Front Axle
   TX1012398 - Without Mechanical Front Wheel Drive (MFWD)
   TX1012400 - Powered Front Axle
   TX1012400 - With Mechanical Front Wheel Drive (MFWD)
   TX1012418 - Mechanical Front Wheel Drive (MFWD) Pressure Test
   TX1012558 - Gas Cock
   TX1012587 - Cab Harness (W10) Wiring Diagram (1 of 3)
   TX1012589 - Air Conditioning Harness (W16) Wiring Diagram
   TX1012595 - Radio Harness (W20) Wiring Diagram
   TX1012654 - Canopy (ROPS) Harness (W5) Wiring Diagram (1 of 3)
   TX1012679 - Hydraulic Oil Cooler
   TX1012702 - Ride Control Harness (W19) Wiring Diagram
   TX1013080 - Pilot Control Harness (W23, W24) Component Location
   TX1013089 - Ride Control Harness (W18, W19) Component Location
   TX1013090 - Selective Flow Control Harness (W17) Component Location
   TX1013269 - Pressure Port Location
   TX1013272 - Transmission System Pressure Test
   TX1013434 - Transmission Cooler
   TX1014051 - Transmission Harness (W9) Component Location
   TX1014474 - Pilot Enable Switch
   TX1014514 - Fuse and Relay Block (X3)
   TX1014609 - Park Brake Switch
   TX1014960 - Cab Harness (W10) Wiring Diagram (2 of 3)
   TX1014961 - Cab Harness (W10) Wiring Diagram (3 of 3)
   TX1014991 - Canopy (ROPS) Harness (W5) Wiring Diagram (2 of 3)
   TX1014992 - Canopy (ROPS) Harness (W5) Wiring Diagram (3 of 3)
   TX1015831 - Hydraulic Pump Operation
   TX1015902 - Ride Control Component Location with Ride Control Switched          Off
   TX1015911 - System Relief Valve
   TX1015913 - 22.35 mm (0.88 in.) Port Size Shown
   TX1015914 - 26 mm (1.06 in.) Port Size Shown
   TX1015921 - Circuit Relief Valve with Anticavitation—Backhoe Swing, Boom Lower
   TX1015923 - Circuit Relief Valve with Anticavitation—Backhoe Bucket Curl and Loader Bucket Dump
   TX1015960 - Steering Valve Oil Flow for a Right Turn
   TX1015961 - Steering Valve Oil Flow for a Left Turn
   TX1015962 - Steering Valve Oil Flow for Secondary Steering
   TX1015990 - Differential Operation
   TX1016095 - Pilot Control Valve Operation (S.N. —172422)
   TX1016097 - Pilot Control Manifold Valve Operation
   TX1016244 - Neutral Position - Engine On
   TX1016245 - Both Pedals Applied - Engine On
   TX1016246 - One Pedal Applied - Engine On
   TX1016281 - Unequal Traction
   TX1016282 - Equal Traction
   TX1016283 - Transmission Filter Operation
   TX1016420 - Mechanical Front Wheel Drive (MFWD)
   TX1016421 - Clutch Pack
   TX1016422 - Service Brakes
   TX1016560 - Transmission Pump
   TX1016611 - Park Brake Switch
   TX1020361 - Wiring Diagram Example
   TX1020664 - Power Shift Transmission Gear Flow-Forward
   TX1020665 - Power Shift Transmission Gear Flow-Reverse
   TX1020697 - Both Pedals Applied, Engine Off Position
   TX1021432 - Torque Converter Operation
   TX1023505 - Air Conditioning and Heater System Component Location
   TX1023505 - Air Conditioning and Heater System Component Location—Stage II Engine
   TX1024866 - Engine Harness (W7) Wiring Diagram (S.N. 150726— )
   TX1025820 - Engine Harness (W7) Wiring Diagram—Stage II Engine
   TX1026198 - Machine Information Gateway (GTT) Wiring Diagram
   TX1026199 -  GlobalTRACS                GlobalTRACS is a registered trademark of Qualcomm Incorporated Terminal (GTT) Wiring Daigram
   TX1026199 - GlobalTRACS® Terminal (GTT) Wiring Daigram
   TX1027054 - Engine Harness (W7) Component Location (S.N. 150726— )
   TX1027054 - Engine Harness (W7) Component Location—Stage II Engine
   TX1027209 - JDLink Fuse Locations—If Equipped (S.N. 150726— )
   TX1031306 - Differential Lock Operation
   TX1034417 - Air Conditioning and Heater System Component Location
   TX1034556 - Engine Cooling System
   TX1034652 - Engine Fuel System Components (Right Side of Engine)
   TX1034653 - Engine Fuel System Components (Left Side of Engine)
   TX1034753 - Engine Harness (W7) Wiring Diagram (2 of 2)
   TX1034851 - Canopy (ROPS) Harness (W5) Wiring Diagram (1 of 3)
   TX1034852 - Canopy (ROPS) Harness (W5) Wiring Diagram (2 of 3)
   TX1034853 - Canopy (ROPS) Harness (W5) Wiring Diagram (3 of 3)
   TX1034859 - Engine Ports
   TX1034877 - Cab Harness (W10) Wiring Diagram (1 of 3)
   TX1034878 - Cab Harness (W10) Wiring Diagram (3 of 3)
   TX1034879 - Cab Harness (W10) Wiring Diagram (2 of 3)
   TX1034966 - Three-Wire Sensor Connector
   TX1035303 - Engine Serial Number Plate—Tier 3 Engine
   TX1035304 - Engine Serial Number Plate—Stage II Engine
   TX1035850 - Fuse and Relay Block (X3)
   TX1036072 - Engine Intake and Exhaust Components
   TX1039745 - Engine Harness (W7) Component Location
   TX1039747 - Engine Harness (W7) Wiring Diagram (1 of 2)
   TX1040085 - Hydraulic Filter Normal Operation (S.N. —173951)
   TX1040089 - Attachment Coupler Hydraulic Operation
   TX1040090 - Pattern Select Valve Operation
   TX1041170 - Machine Information Gateway (GTT) Wiring Diagram
   TX1047174 - Hydraulic Thumb Component Location (manual controls with standard dipperstick shown)
   TX1047720 - Power Shift Transmission
   TX1047721 - Clutch Pressure Test Ports
   TX1054312 - Water In Fuel (WIF) Console Harness (W41) Wiring Diagram
   TX1054314 - Water-in-Fuel (WIF) Sensor Harness (W40) Wiring Diagram
   TX1054330 - Loader Coupler Harness (W21, W22) Component Location
   TX1054331 - Loader Coupler Console Harness (W21) Wiring Diagram
   TX1054659 - Water-in-Fuel (WIF) Harnesses (W40, W41) Component Location
   TX1054694 - Engine Fuel System Components—Stage II Engine (Left Side of Engine)
   TX1062549 - Hydraulic Filter Restricted Operation (S.N. —173951)
   TX1062592 - Hydraulic Filter Restricted Operation (S.N. 173952— )
   TX1062593 - Hydraulic Oil Filter Manifold (S.N. 173952— )
   TX1063985A - Pilot Enable and Pattern Select Valve (S.N. 178749—191460)
   TX1063985A - Pilot Enable and Pattern Switch Valve (S.N. 178749— )
   TX1064100 - Pilot Enable Pattern Select Valve Harness (W47) Wiring Diagram (S.N. 178749— )
   TX1064107 - Pilot Enable Switch Harness (W48) Wiring Diagram (S.N. 178749— )
   TX1064113 - Pilot Control Harness (W24, W47, W48) Component Location (S.N. 178749— )
   TX1065199 - Hydraulic System Operation
   TX1065337 - Pilot Controls (S.N. 178749— ) (backhoe pattern shown)
   TX1065437 - Pilot Control Valve Operation (S.N.172423— )
   TX1067646A - Loader and Stabilizer Control Valve System Relief
   TX1070782 - Blower Switch
   TX1072181 - Two-Wire Sensor Test
   TX1072182 - Three-Wire Sensor Test
   TX1072194 - R134a Refrigerant Theory of Operation
   TX1072195A - Four Lever Configuration
   TX1072198 - Expansion Valve Operation
   TX1072199 - Engine Control Unit (ECU) Circuit
   TX1072199 - Engine Control Unit (ECU) Circuit—Stage II Engine
   TX1072220 - Power Train Schematic—Neutral
   TX1072228 - Power Train Schematic—First Forward Mechanical Front Wheel Drive (MFWD) Engaged
   TX1072229 - Power Train Schematic—First Reverse
   TX1072233 - Power Train Schematic—Fourth Forward
   TX1072266 - Starting and Charging Circuit
   TX1072267 - Flex Load Controller (FLC) Circuit—310J, 310SJ, 410J (2 of 2)
   TX1072274 - Park Brake Operation
   TX1072289 - Start and Charge Circuit—Stage II Engine
   TX1072317 - Backhoe Control Valve Selective Auxiliary Flow Section—Solenoid De-energized
   TX1072318 - Backhoe Control Valve Selective Auxiliary Flow Section—Solenoid Energized
   TX1072319 - Backhoe Control Valve Swing Section—Swing Left Position
   TX1072320 - Backhoe Control Valve Boom Section—Boom Lower Position
   TX1072321 - Backhoe Control Valve Boom Section—Boom Raise Position (pilot control option shown)
   TX1072322 - Backhoe Control Valve Bucket Section—Bucket Curl Position
   TX1072324 - Backhoe Control Valve Crowd Section—Crowd Out Position
   TX1072326 - Backhoe Control Valve Auxiliary Section—Neutral Position with Upstream Function
   TX1072383 - Engine Control Unit (ECU) Circuit
   TX1072455 - 310J Hydraulic System Schematic Manual Controls (neutral position) (S.N. —217841)
   TX1072742 - Controller Area Network (CAN) Circuit
   TX1074504 - Brake Bleeding Procedure Using Bleed Screw Method
   TX1077066 - System Functional Schematic Example
   TX1081048 - Modulation in Clutch Pack
   TX1081823 - Brake Pedal Travel
   TX1083072 - JDLink™ Satellite (SAT) Harness (W6003) Wiring Diagram—If Equipped (S.N. 196271— )
   TX1085829 -  JDLink                JDLink is a trademark of Deere & Company Modular Telematics Gateway (MTG) Harness (W6002) Wiring Diagram—If Equipped (S.N. 196271— )
   TX1091297 - Pilot Enable and Pattern Select Valve (S.N. 191461— )
   TX1091322 - Pilot Control Pressure Reducing Valve—Cross Section
   TX1095540 - Standard Display Monitor (SDM) Circuit
   TX1095543 - Standard Display Monitor (SDM) Circuit
   TX1098172 - Flex Load Controller (FLC) Circuit—310J, 310SJ, 410J (1 of 2)
   TX1098856 - Priority Valve Operation—Not Steering (S.N. 217842— )
   TX1099005 - Steering Valve in Neutral
   TX1099064 - Flex Load Controller (FLC) Circuit (1 of 2)
   TX1104912 - 310J Hydraulic System Schematic Manual Controls (neutral position) (S.N. 217842— )
   TX1107917 - Bucket Position For Cylinder Drift Test
   TX1107918 - Measure Cylinder Drift
   TX1108216 - Priority Valve Operation—Not Steering (S.N. —217841)
   TX1116233 - Controller Area Network (CAN) Circuit
   TX1123977 - Machine Information Harness (W30)—If Equipped
   TX1123979 -  JDLink                JDLink is a trademark of Deere & Company Fuse Locations—If Equipped
   TX1123981 -  JDLink                JDLink is a trademark of Deere & Company System Functional Schematic (SE43—SE45)
   TX1123988 -  JDLink                JDLink is a trademark of Deere & Company Harnesses (W30, W31, and W32) Component Location
   TX1123990 -  JDLink                JDLink is a trademark of Deere & Company Component Location
   TX1123992 -  JDLink             JDLink is a trademark of Deere & Company Circuit Theory of Operation
   TX1124218 -  JDLink                JDLink is a trademark of Deere & Company System Functional Schematic (SE43—SE45)
   TX1129702 - Return-to-Dig Harness (W25) Wire Diagram
   TX1129710 - Diode Supression Harness (W33) Wire Diagram
   TX1133270A - Boom Section (front)
   TX1133276A - Bucket Section (front)
   TX1134340A - Stabilizer Sections
   TX1134362A - Boom Section (back)
   TX1134366A - Bucket Section (back)
   TX1134370A - Auxiliary Section (back)
   TX1135732 - Left Stabilizer Section (stabilizer lowered
   TX1135734 - Bucket Section (bucket roll back position)
   TX1135813A - 5-Function Loader and Stabilizer Control Valve
   TX1135839A - Auxiliary Section (front)
   TX1136379A - Park Brake Release Pressure Port
   TX1138545 - Return-to-Dig Harness (W25) Component Location
   TX1141298 - 5-Function Loader and Stabilizer Control Valve (neutral)
   TX1141299 - Boom Section (boom raise position)
   TX1141300 - Auxiliary Section
   TX1143091A - Connector Body
   TX1143115A - Contact View
   TX1143122A - Contact View
   TX1143135A - Terminal Applicator
   TX1143140A - Sleeve and Pin
   TX1143515 - Satellite (SAT) Harness (W6003) Wiring Diagram
   TX1143721A - Extractor Tool
   TX1143726A - Terminal Contact
   TX1143727A - Pushing Contact
   TX1143728A - Locking Wedge Removal
   TX1143737A - Primary Locking Latch
   TX1143738A - Wire Contact Removal
   TX1143776A - JDG360 Crimper
   TX1143778A - JDG360 Crimper Detail
   TX1143780A - Crimping
   TX1143782A - Properly Crimped Contact
   TX1143836A - Locking Tabs
   TX1143838A - Primary Contact Lock
   TX1143876 - JDG708 Crimping Tool Detail
   TX1143888 -  CINCH                CINCH is a trademark of Cinch Inc. CP Connectors
   TX1143918 - Secondary Lock
   TX1143921 - Cavity Identification
   TX1143926 - Seal Plug Installation
   TX1143928 - Terminal Installation
   TX1144001 - Cable Tie
   TX1144006A - Secondary Lock
   TX1144007A - Cover Installation
   TX1144235A - Push-Type Metri-Pack® Connector
   TX1144236A - Pull-Type Metri-Pack® Connector
   TX1144250A - Terminal Extraction
   TX1144251A - Terminal Removal
   TX1144300 - JDG1727 Hand Crimp Tool
   TX1144301 - Terminal Receptacle
   TX1144302 - Strip Wire
   TX1144305 - Properly Terminated Wire
   TX1144435 - Cover Removal
   TX1144440 - Terminal Removal
   TX1144441 - Secondary Lock
   TX1144670 - Modular Telematics Gateway (MTG) Harness (W6002) Wiring Diagram
   TX1144698 -  JDLink Functional Schematic—MTG
   TX1144780 - JDLink™ Harness (W30, W38, W6002, and W6003) Component Location
   TX1144842 -  JDLink System Functional Schematic
   TX1145146 -  JDLink System Harnesses (W30, W31, W32, and W38) Component Location
   TX1145147 - Machine Information Harness (W30) Wiring Diagram
   TX1145620 - 310J Hydraulic System Schematic Pilot Controls (neutral position) (S.N. 178749—217841)
   TX1145621 - 310J Hydraulic System Schematic Pilot Controls (neutral position) (S.N. 217842— )
   TX1148701 -  JDLink                JDLink is a trademark of Deere & Company Functional Schematic (SE43—SE44)
   TX1164079 - Cab Harness (W10) Component Location
   TX1164079 - Canopy (ROPS) Harness (W5) Component Location
   TX1164080 - Cab Harness (W10) Component Location
   TX1164080 - Canopy (ROPS) Harness (W5) Component Location
   TX1168610 - Generic CAN Circuit Schematic
   TX1202423 - Transmission Harness (W9) Wiring Diagram
   XJ1162533 - Power Shift Transmission
   XJ1162533 - Power Shift Transmission (Shown with Mechanical Front Wheel Drive)
   XJ1168798 - Start and Charge Circuit
   XJ1175814 - Backhoe Control Valve Boom Section—Boom Raise Position (pilot control option shown)
   XJ1183240 - Pilot Controls (S.N. —178748)
   XJ1183588 - 310J Hydraulic System Schematic Pilot Controls (neutral position) (S.N. —178748)

EXCERPT:
Mechanical Front Wheel Drive (MFWD) Gear and Pinion Check
Action:
Drive machine at transport speed with mechanical front wheel drive (MFWD) engaged, then disengage.
LISTEN: Does mechanical front wheel drive (MFWD) “whine” when disengaged?
NOTE:
It is normal for mechanical front wheel drive (MFWD) to “whine” when engaged at transport speeds.
Result:
YES: Go to next check.
NO: If mechanical front wheel drive (MFWD) “whines”, check oil levels and fill to correct level.
24 Ride Control System Check (If Equipped)
Action:
Run engine at slow idle.
Turn ride control ON.
Raise loader boom to maximum height.
Power boom down half-way to the ground.
Stop suddenly by releasing the joystick.
LOOK: Is boom cushioned when joystick is released?
...

John Deere 310J Backhoe Loader Technical Manual (Operation & Test) (TM10846)

Additional 10% off on US$30+ order paid with Credit Card: 10POFF.

To pay in your local currency (EURO, GBP, AUD, CAD, HKD, JPY, etc.), please contact us.