Logo

Cart

Click title to display cart contents.
0 Items $0.00

BMW (E93) 2005-2013 Series Factory Service & Shop Manual

Catalog: 

Make: 

Model: 

US Dollar: $19.99

10,235 pages, bookmarked, Searchable, Printable, high quality PDF

316i 2007-2013
318i 2005-2013
320i 2005-2013
320si 2005-2007
323i 2005-2013
325i 2005-2013
328i 2007-2013
330i 2005-2013
335i 2006-2013
335is 2011-2013
M3 2007-2013
M3 GTS 2010-2011

Complete workshop & service manual with electrical wiring diagrams for BMW (E93) 2005-2013. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

BMW (E93) 2005-2013 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
Table of Contents (Exploded View)
├── Repair & Maintenance
│   ├── 00 Maintenance & General Note
│   │   ├── 0 operating fluid overview
│   │   ├── 5.1.1 Axles
│   │   ├── 7.11 Odometer (if present)
│   │   ├── 7.12 Driving dynamics control (Electronic Stability Program, ESP) (if installed required)
│   │   ├── 7.1.3 Belt force limiter
│   │   ├── 7.1.4 Seat belt tensioner
│   │   ├── 7.1.5 Airbag
│   │   ├── 7.1.6 Supplementary restraint systems (SRS)
│   │   ├── Abbreviations
│   │   ├── Addition to special tools cabinet All model series
│   │   ├── Arguments pertaining to engine oil consumption
│   │   ├── Battery Checking display. If necessary, recharging battery
│   │   ├── Battery_ Checking display. If necessary, recharging battery
│   │   ├── Battery recharging intervals for booth vehicles, battery charging calendars and battery tags (12-V battery, high-voltage battery unit)
│   │   ├── Body_ Check for corrosion (except cavities)
│   │   ├── Brake fluid - Operating Fluids Specification
│   │   ├── Brake fluid service 342200223 Bonnet gas strut check with active pedestrian impact mitigation302240(SA8TF)
│   │   ├── Brake lines and connections_ visual inspection for leaks, damage, attachment and correct position
│   │   ├── CBS general - Reset is lost
│   │   ├── CBS reset
│   │   ├── Changed emissions test indicator BMW Condition Based Service
│   │   ├── Changes in maintenance intervals (air cleaner, diesel fuel filter)
│   │   ├── Check horn, headlight flashers and hazard warning flashers
│   │   ├── Checking coolant level and concentration, correcting if necessary
│   │   ├── Checking instrument inscription lighting, interior luggage compartment glove box lights and blower
│   │   ├── Checking lighting system
│   │   ├── Checking of road safety (test drive)
│   │   ├── Checking topping up oil level in automatic transmission (GA6L45R)
│   │   ├── Checking topping up oil level in automatic transmission
│   │   ├── Checking topping up oil level in rear axle final drive
│   │   ├── Check windscreen wash wipe system
│   │   ├── Condition Based Service
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Diagnostic brief test
│   │   ├── Drawbar load sign omitted All with options 235 and 3AC
│   │   ├── Emergency Services (BMW MINI) from issue September 2009
│   │   ├── Engine oil consumption measurement
│   │   ├── Engine oil service - countries with higher levels of dust_ Check the air filter element for contamination
│   │   ├── Engine oil - varying colours smell after initial filling in the works
│   │   ├── Excerpt from company standard BMW GS 90003-2
│   │   ├── FEB-FEB-NED-TESTMODULE-AKTUELL
│   │   ├── Final drive oil - new oil quality from 07 2011
│   │   ├── Form for equipotential bonding screw connections
│   │   ├── General and legal information on performing the periodic exhaust-gas (emissions) test in EU countries
│   │   ├── Group 00
│   │   ├── Harmonisation of oil change intervals BMW
│   │   ├── Ignition key data tapping on CBS vehicles
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on intelligent battery sensor (IBS)
│   │   ├── Information on using cleaning agent paints (personal protection equipment)
│   │   ├── Information warning labels
│   │   ├── Instructions for desiccant insert replacement
│   │   ├── Instructions for handling R 134a refrigerant
│   │   ├── Instructions for replacement of air conditioning capacitors and radiator coolers
│   │   ├── Interrogating fault memories in Diagnosis System
│   │   ├── List of contents
│   │   ├── M10 and M10 x 1 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M12 and M12x1.5 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M14 and M14x1.5 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M16 and M16x1.5 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M18 and M18x1.5 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M4 and M5 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M6 and M7 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── M8 and M8 x 1 - maximum tightening torques acc. to BMW GS 90003-2
│   │   ├── Microencapsulated screws
│   │   ├── Modifications to 342200235Condition Based Service342200235 maintenance system
│   │   ├── New Maintenance Records service booklet and maintenance documentation All models
│   │   ├── New repair methods 342200235Gluing Riveting342200235 on steel bodies
│   │   ├── Notes for disconnecting and connecting battery
│   │   ├── Notes on AGM battery
│   │   ├── Notes on changing the air conditioning compressor, determining the amount of refrigerant oil (amount of refrigerant oil of new air conditioning compressor not known)
│   │   ├── Notes on handling optical fibres
│   │   ├── Notes on handling the high pressure cleaner
│   │   ├── Notes on handling wiring harnesses and cables
│   │   ├── Notes on radio-operated system (vehicle access, radio-operated opening, radio-operated closing)
│   │   ├── Parking brake function check - new procedure in the standard service scope rear brake service
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Pre-delivery check
│   │   ├── Raising the vehicle using a vehicle lift
│   │   ├── Raising vehicle with trolley jack
│   │   ├── Reduced spark plug change intervals
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling oil
│   │   ├── seat belt buckles
│   │   ├── Seat belts_ Check condition of seat belt strap, check function of automatic reel, seat belt locking reel, seat belt buckle, seat belt clip and, if necessary, seat belt clasp
│   │   ├── Service - air filter element
│   │   ├── Service - brake fluid
│   │   ├── Service - engine oil
│   │   ├── Service - front brakes
│   │   ├── Service intervals for countries with low fuel grade (SA988 SA8KE, SA8KM, SA984, SA8KK, SA8KL, SA8KH, SA8KP)
│   │   ├── Service - microfilter
│   │   ├── Service - rear brakes
│   │   ├── Service Sheets - Condition-based Service Pre-delivery Check (ISTA, ISPA, Commercial Service Data)
│   │   ├── Service - spark plugs
│   │   ├── Service - vehicle check
│   │   ├── Service - vehicle check - revised maintenance scope
│   │   ├── Standard scope of service
│   │   ├── Standard work scope - expansion of work scope (with slide tilt sunroof and panorama glass roof)
│   │   ├── Steering components_ Check for play, tightness, damage and wear
│   │   ├── Steering fluid fuel tank_ Check oil level
│   │   ├── Supplement for target exhaust emission data from 04 2007 to 03 2009 Test procedure for lean-mix petrol engines. Amended test procedure and flat rate units for exhaust emission inspection on vehicles as f
│   │   ├── Supplement for target exhaust emissions inspection data of BMW and MINI vehicles from 04 2009. Modified test specifications for petrol lean-mixture engines N43 and N53. Test procedure for hybrid vehicles
│   │   ├── Symbols used and information in repair instructions
│   │   ├── Test instructions for the exhaust-gas (emissions) test on BMW vehicles with petrol engines
│   │   ├── Test instructions for the exhaust gas test (AU) on BMW vehicles with diesel engines from European emission classification EURO 6
│   │   ├── Test instructions for the exhaust gas test (AU) on BMW vehicles with petrol engines from European emission classification EURO 6
│   │   ├── Triggering rollover protection system (Convertible) via diagnosis interface (Important - remove hard top or open convertible top first)
│   │   ├── Tyres_ checking and if necessary correcting inflation pressure, checking condition, tread depth and pattern
│   │   ├── Underbody incl. all visible components_ Check for damage, correct position, tightness, corrosion
│   │   ├── Vehicle care measures for inventory vehicles (new and used vehicles) as well as vehicles to be taken off the road that are in the hands of customers
│   │   ├── Vehicle test
│   │   ├── Visible corrosion on vehicle add-on parts
│   │   ├── When driving on a race track
│   │   ├── Windscreen washer system_ checking fluid level, topping up if necessary
│   │   ├── Work instruction for removing the protective film
│   │   ├── Workshop Equipment - Planning Documentation
│   │   └── Workshop equipment sales
│   ├── 11 Engine
│   │   ├── 1100 Overview of tightening torques
│   │   ├── 1112 Overview of Technical Data
│   │   ├── 1112 Overview of tightening torques
│   │   ├── 1130 Overview of tightening torques
│   │   ├── 1131 Overview of tightening torques
│   │   ├── 11 operating fluid overview
│   │   ├── 6.1.9 Engine performance
│   │   ├── 9.0 BMW Longlife-17 FE+
│   │   ├── Adjusting camshaft timing (N51)
│   │   ├── Air pump, lines and control valves
│   │   ├── AM1101_00597 - Engine, noise
│   │   ├── AM1101_00598 - Engine, noise
│   │   ├── AM1104_00192 - Operating fluids leak from engine
│   │   ├── Bearing shells Guide bearing shells Bearing seat table 3_S63
│   │   ├── BMW Quality Longlife-04 All
│   │   ├── Camshaft N51 B30
│   │   ├── Camshaft
│   │   ├── Case Covers
│   │   ├── Checking camshaft timing
│   │   ├── Checking cylinder head for leaks (N51)
│   │   ├── Checking engine oil pressure (N51)
│   │   ├── Cleaning the cylinder head intake ports and the combustion chamber with the walnut blaster
│   │   ├── Connecting Rods and Bearings N51 B30
│   │   ├── Connecting Rods and Bearings
│   │   ├── Crankshaft and Bearings N51 B30
│   │   ├── Crankshaft and Bearings
│   │   ├── Cylinder Head with Cover N51 B30
│   │   ├── Cylinder Head with Cover
│   │   ├── Cylinder Head with Valve Seat Cover N51 B30
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Emissions control, control sensor monitor sensor
│   │   ├── Emissions-control, Lambda oxygen sensor
│   │   ├── Engine Block, Cylinder Crankcase, BMW, N51, B30
│   │   ├── Engine block
│   │   ├── Engine identification
│   │   ├── Engine in general N51 B30
│   │   ├── engineN52
│   │   ├── Engine oil consumption measurement
│   │   ├── Equipment recoding special tool number of the transverse member for fixing the engine in the installation location
│   │   ├── Fan
│   │   ├── Flywheel
│   │   ├── Handling components after flood damage
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Installing and removing replacing chain tensioner piston (N51)
│   │   ├── Intake manifold
│   │   ├── Leak-testing the air-intake system
│   │   ├── Main group 11
│   │   ├── Mounting engine on assembly stand (N51)
│   │   ├── Oil Filter and Pipes
│   │   ├── Oil Pump with Strainer and Drive N51 B30
│   │   ├── Oil Pump with Strainer and Drive
│   │   ├── Oil sump
│   │   ├── Oil Supply E90, E92, E93 N51 B30
│   │   ├── Overview of consumables (Electronic Parts Catalogue)
│   │   ├── Pistons with Rings and Pins, BMW, N51, B30
│   │   ├── Pistons with Rings and Pins N51 B30
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Removing and installing engine (N51)
│   │   ├── Removing and installing intake air manifold (N51)
│   │   ├── Removing and installing oil pump (N51)
│   │   ├── Removing and installing or replacing all valves (N51)
│   │   ├── Removing and installing or replacing flywheel (N51)
│   │   ├── Removing and installing or replacing vacuum pump (N51)
│   │   ├── Removing and installing or replacing vibration damper (M51)
│   │   ├── Removing and installing renewing coolant pump (N51)
│   │   ├── Removing and installing replacing acoustic cover (N51)
│   │   ├── Removing and installing replacing all pistons (N51)
│   │   ├── Removing and installing replacing all rocker arms (N51)
│   │   ├── Removing and installing replacing both lambda oxygen control sensors (N51)
│   │   ├── Removing and installing replacing both lambda oxygen monitoring sensors (N51)
│   │   ├── Removing and installing replacing chain module for oil pump vacuum pump (N51)
│   │   ├── Removing and installing replacing coolant thermostat (N51)
│   │   ├── Removing and installing replacing eccentric shaft (N51)
│   │   ├── Removing and installing replacing eccentric shaft sensor (N51)
│   │   ├── Removing and installing replacing elbow fitting
│   │   ├── Removing and installing replacing exhaust camshaft (N51)
│   │   ├── Removing and installing replacing front exhaust manifold (N51)
│   │   ├── Removing and installing replacing full-flow oil filter (N51)
│   │   ├── Removing and installing replacing gasket for eccentric shaft sensor (N51, N52K)
│   │   ├── Removing and installing replacing inlet and exhaust adjustment units (N51)
│   │   ├── Removing and installing replacing intake camshaft (N51)
│   │   ├── Removing and installing replacing intermediate levers (N51)
│   │   ├── Removing and installing replacing positioning motor for eccentric shaft (N51)
│   │   ├── Removing and installing replacing rear exhaust manifold (N51)
│   │   ├── Removing and installing sealing cylinder head cover (N51)
│   │   ├── Removing and installing sealing cylinder head (N51)
│   │   ├── Removing and installing, sealing or replacing oil sump (N51)
│   │   ├── Replacing all connecting rod bearings (N51)
│   │   ├── Replacing all crankshaft main bearings (N51)
│   │   ├── Replacing all valve springs (N51)
│   │   ├── Replacing all valve stem seals (N51)
│   │   ├── Replacing alternator drive belt (N51)
│   │   ├── Replacing crankshaft (N51)
│   │   ├── Replacing crankshaft seal (N51) on transmission side by 31.12.08
│   │   ├── Replacing cylinder head gasket (N51)
│   │   ├── Replacing front crankshaft seal (N51)
│   │   ├── Replacing piston rings on all pistons (N51)
│   │   ├── Replacing radial crankshaft seal on transmission side N51 by 01.01.09
│   │   ├── Replacing tensioning device for alternator drive belt (N51)
│   │   ├── Replacing timing chain (N51)
│   │   ├── Replacing vacuum pump sealing cover (N51)
│   │   ├── Resurfacing cylinder head sealing face (N51)
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling oil
│   │   ├── Sealing crankcase lower section (N51)
│   │   ├── Securing engine in installation position (N51)
│   │   ├── Service - engine oil (N51)
│   │   ├── Table Bearing shells Bearing seats table 1, 2, 4 , 5 S63
│   │   ├── Thermostat and Connections
│   │   ├── Vacuum pump
│   │   ├── Vacuum supply All models
│   │   ├── Valves with Springs N51 B30
│   │   ├── Variable Camshaft Control
│   │   ├── Variable valve gear N51 B30
│   │   ├── Variable valve gear
│   │   ├── Vibration Damper N51 B30
│   │   ├── Vibration Damper
│   │   ├── V-ribbed belt with Tension and Deflection Element
│   │   └── Water Pump and Drive
│   ├── 12 Engine Electrical System
│   │   ├── Alternator with Drive and Mounting Parts
│   │   ├── Battery replacement information
│   │   ├── Bracket for oil level sensor earth strap
│   │   ├── Checking alternator (BSD)
│   │   ├── Contents of Engine Electrical System General
│   │   ├── Electronic Shift Units or Control Units
│   │   ├── Encoding the control unit (DME DDE)
│   │   ├── Engine oil pressure, engine oil temperature, oil condition display
│   │   ├── Form for equipotential bonding screw connections
│   │   ├── Handling components after flood damage
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Instructions for removal and replacement of control units
│   │   ├── Instructions for working on the ignition system
│   │   ├── Intake manifold
│   │   ├── Notes for disconnecting and connecting battery
│   │   ├── Notes information on start assistance (jump starting)
│   │   ├── Notes on handling wiring harnesses and cables
│   │   ├── Oil pressure, oil temperature, oil level display
│   │   ├── Plug connections, terminals, loose parts
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Programming the control unit (DME DDE)
│   │   ├── Release pressing-off tool
│   │   ├── Remove and install or replace the oil level sensor for engine oil (N52, N52K, N51, N46, N54, N54T, N53)
│   │   ├── Remove and install replace all spark plugs (N40, N42, N45, N45T, N46, N46T, N51, N52, N52K)
│   │   ├── Removing and installing or replacing alternator (N52, N52K, N51, N53)
│   │   ├── Removing and installing replacing electronics box
│   │   ├── Removing and installing replacing oil pressure sensor (N52, N52K, N51, N54, N54T N53)
│   │   ├── Removing and installing replacing starter motor (N52, N52K, N51, N53, N54)
│   │   ├── Removing replacing knock sensors (N52, N52K, N51)
│   │   ├── Replacing alternator belt pulley
│   │   ├── Replacing battery positive lead (between starter, alternator and battery positive terminal)
│   │   ├── Replacing control unit (DME)
│   │   ├── Replacing crankshaft pulse generator (N52, N52K, N51, N53)
│   │   ├── Replacing exhaust camshaft pulse generator (N52, N52K, N51, N53)
│   │   ├── Replacing fan for electronics box
│   │   ├── Replacing ignition coils (N52, N52K, N51)
│   │   ├── Replacing inlet camshaft pulse generator (N52, N52K, N51, N53)
│   │   ├── Replacing safety battery terminal (SBK)
│   │   ├── Replacing the engagement solenoid switch
│   │   ├── Replacing voltage regulator
│   │   ├── Replacing wiring harness section for engine (N52K, N51)
│   │   ├── Replacing wiring harness section for ignition coil (N52K, N51)
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Spark Plugs
│   │   ├── Starter line
│   │   └── Starter motor with mounting
│   ├── 13 Fuel Preparation and Control
│   │   ├── 13 operating fluid overview
│   │   ├── Check fuel delivery pressure (N51,N52 ,N52K )
│   │   ├── Fuel Injector Nozzles and Lines
│   │   ├── Group 13
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Injectors and Lines, Fuel Pressure Regulator N52, N52K, N51
│   │   ├── Notes regarding the fuel pressure test (reference pressure_ surrounding area)
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Remove and install replace the differential pressure sensor (N52 N52K N51)
│   │   ├── Removing and installing radiator sensor (environmental air catalyst sensor) (N51)
│   │   ├── Removing and installing replacing a fuel injector (N52, N52K, N51)
│   │   ├── Removing and installing replacing air-mass flow sensor (N51)
│   │   ├── Removing and installing replacing intake filter housing (N51)
│   │   ├── Removing and installing sealing throttle body (N51, N52, N52K, N53)
│   │   ├── Removing intake duct (N52 N52K N51 N53)
│   │   ├── Replacing air filter element (N51)
│   │   ├── Replacing air intake hose (N51)
│   │   ├── Replacing all fuel injectors
│   │   ├── Replacing complete fuel rail (N51N52 N52K)
│   │   ├── Replacing complete injection pipe (N51)
│   │   ├── Replacing coolant temperature sensor (N51)
│   │   ├── Replacing radiator outlet coolant temperature sensor (N51)
│   │   ├── Replacing tank vent valve (N52 N52K N51 N53)
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Senders for Control Unit
│   │   └── Throttle and actuator
│   ├── 16 Fuel Supply
│   │   ├── Checking fuel filler cap pressure relief valve
│   │   ├── Checking fuel tank and tank ventilation system for leaks
│   │   ├── Checking fuel tank and tank venting system for leaks with tank leakage diagnosis module (DMTL)
│   │   ├── Checking repumping function of suction jet pump with BMW diagnosis system
│   │   ├── Conducting leak test on fuel tank and tank venting system
│   │   ├── Diagnosis of fuel tank systems with fuel tank leak diagnosis module (DMTL) All US models
│   │   ├── Draining and filling fuel tank
│   │   ├── Fitting aid quick connector retainer repair kit (US vehicle with engine N51)
│   │   ├── Fuel Delivery
│   │   ├── Fuel pump
│   │   ├── Fuel Supply, Sensor for Indication E90, E91, E92, E93
│   │   ├── Fuel supply system (petrol gasoline)
│   │   ├── Fuel Tank and Mounting Parts E90, E92, E93 N51
│   │   ├── Fuel Tank and Mounting Parts
│   │   ├── Functional description for general fuel supply systems
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on using cleaning agent paints (personal protection equipment)
│   │   ├── Overview of fuel supply system
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Removing and installing or replacing carbon canister
│   │   ├── Removing and installing or replacing control unit for electric fuel pump
│   │   ├── Removing and installing or replacing fuel pump (petrol gasoline)
│   │   ├── Removing and installing or replacing fuel tank (petrol gasoline)
│   │   ├── Removing and installing replacing carbon canister (DMTL)
│   │   ├── Removing and installing replacing dust filter for tank leak diagnosis module (DMTL)
│   │   ├── Removing and installing replacing fuel filler pipe (US vehicles with N51 engines)
│   │   ├── Removing and installing replacing fuel filter with pressure regulator (US cars with N51 engines)
│   │   ├── Removing and installing replacing fuel gauge sensor (left side US cars with N51 engines)
│   │   ├── Removing and installing replacing fuel gauge sensor (right side US cars with N51 engines)
│   │   ├── Removing and installing replacing fuel level sensor (petrol, right)
│   │   ├── Removing and installing replacing fuel pump (US vehicles with engine N51)
│   │   ├── Removing and installing replacing fuel tank (US vehicles with N51 engines)
│   │   ├── Removing and installing replacing tank leak diagnosis module (petrol gasoline cars with US DMTL version)
│   │   ├── Removing and installing replacing vent hose with strainer for carbon canister
│   │   ├── Replacing rubber sleeve between fuel filler pipe and fuel tank
│   │   ├── Replacing tensioning straps for fuel tank
│   │   └── Tank ventilation
│   ├── 17 Cooling
│   │   ├── 17 operating fluid overview
│   │   ├── Bleed and fill cooling system with vacuum filling unit
│   │   ├── Checking cooling system for watertightness
│   │   ├── Checking function of radiator and heating system
│   │   ├── Coolant, Cooling System Test, BMW, E90, E92, E93, N51
│   │   ├── Coolant
│   │   ├── Draining and topping up coolant (N52, N52K, N51,N53)
│   │   ├── Fill cooling system
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Instructions for replacement of air conditioning capacitors and radiator coolers
│   │   ├── Instructions for working on cooling system
│   │   ├── Main group 17
│   │   ├── Notes on retrofitting a trailer towing device
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Radiator and Mounting Parts
│   │   ├── Radiator, expansion tank, lines (N52, N52K, N51, N54, N54T, N45, N45T, N46, N46T)
│   │   ├── Radiator with mounting
│   │   ├── Remove and install or replace the cooling loop for hydraulic steering (N54, N54T, N52, N52K, N51, N53, S65)
│   │   ├── Removing and installing radiator (N51, S65)
│   │   ├── Removing and installing radiator sensor (environmental air catalyst sensor) (N51)
│   │   ├── Removing and installing replacing both radiator brackets (N54, N54T, N52, N52K, N51, N53)
│   │   ├── Removing and installing replacing coolant expansion tank (N45, N45T, N46, N46T, N52, N52K, N51, N53)
│   │   ├── Removing and installing replacing fan cowl with electric fan (N51)
│   │   ├── Removing and installing replacing heat exchanger for automatic transmission
│   │   ├── Removing and installing replacing module carrier
│   │   ├── Removing intake duct (N52 N52K N51 N53)
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Vent cooling system
│   │   └── Venting cooling system and checking for water leaks (N52 N52K N51 N53)
│   ├── 18 Exhaust System
│   │   ├── 1820 Overview of tightening torques
│   │   ├── 1831 Overview of tightening torques
│   │   ├── 18 operating fluid overview
│   │   ├── 8.2.1.1 Emission control systems
│   │   ├── 8.2.1.2 Gaseous emissions
│   │   ├── 8.2.2.1 Emission control devices
│   │   ├── 8.2.2.2 Exhaust gas opacity vehicles, vehicles registered or in operation prior to 01.01.1980 are excluded
│   │   ├── Exhaust standard EURO 4 and E-OBD for diesel engines
│   │   ├── Exhaust system suspension
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Radiator with mounting
│   │   ├── Rear silencer
│   │   ├── Removing and installing replacing complete exhaust system (N52 N52K N51)
│   │   ├── Removing and installing replacing front exhaust manifold (N51)
│   │   ├── Removing and installing replacing rear exhaust manifold (N51)
│   │   ├── Removing and installing replacing trim for exhaust pipe
│   │   ├── Replacing front silencer (N51)
│   │   └── Replacing rear silencer (N51)
│   ├── 21 Clutch
│   │   ├── 3.0 ATE brake cylinder paste, grease in the clutch region
│   │   ├── Gauge 21 2 070 All Model Series
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Main group 21
│   │   └── Precautionary measures on vehicles with active pedestrian protection system
│   ├── 22 Engine and Transmission Mounting
│   │   ├── 2211 Overview of tightening torques
│   │   ├── Engine mounting
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Main group 22
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Replacing cross-member for transmission mounting
│   │   ├── Replacing left engine mount (N51 N52 N52K N53)
│   │   ├── Replacing left engine support arm (N51 N52 N52K N53)
│   │   ├── Replacing right engine mount (N51 N52 N52K N53)
│   │   ├── Replacing right engine support arm (N51 N52 N52K N53)
│   │   ├── Replacing rubber mount for transmission mounting
│   │   └── Transmission mounting
│   ├── 23 Manual Gearbox
│   │   ├── 1.0 General information on oil for manual transmissions
│   │   ├── 1.0 Transmission oil for DKG GS7D36SG
│   │   ├── 2.0 Transmission oil for BMW manual gearboxes manufactured after 09 1997
│   │   ├── 2300 Overview of Technical Data
│   │   ├── 2300 Overview of tightening torques
│   │   ├── 23 operating fluid overview
│   │   ├── 4.0 transmission fluid for manual gearboxes
│   │   ├── 5.0 transmission fluid for manual gearboxes
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Kinematics diagnosis system and environment
│   │   ├── Main group 23
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety instructions for handling oil
│   │   ├── Synchronization GS6-53DZ
│   │   ├── Transmission designations
│   │   ├── Transmission in general S7S 47BG
│   │   ├── Universal BMW transmission take-up
│   │   └── Universal transmission retaining bridge
│   ├── 24 Automatic Transmission
│   │   ├── 2400 Overview of tightening torques
│   │   ├── 2411 Overview of tightening torques
│   │   ├── 2440 Overview of tightening torques
│   │   ├── 24 operating fluid overview
│   │   ├── 6-speed automatic transmission
│   │   ├── Adjusting selector lever (A5S 360R 390R, A4S 200R, 6HP26Z 19Z)
│   │   ├── Adjusting selector lever (GA6L45R)
│   │   ├── Adjusting shift lever
│   │   ├── Adjusting the gearshift lever PREMIUM
│   │   ├── AM2401_00210 Automatic transmission noise
│   │   ├── AM2404_00209 - Automatic gearbox operating fluids leakage
│   │   ├── Checking topping up oil level in automatic transmission (GA6L45R)
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── External shift linkage
│   │   ├── Form for equipotential bonding screw connections
│   │   ├── Hydraulic electric control parts and controlling elements
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Input, Intermediate and Output Shafts
│   │   ├── Installing exchange transmission (GA6L45R)
│   │   ├── Interior Shift Elements
│   │   ├── Main group 24
│   │   ├── Notes on mechatronics (GA6L45R)
│   │   ├── Planetary gear drive
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Primary Pump
│   │   ├── Removing and installing automatic transmission (GA6L45R)
│   │   ├── Removing and installing replacing input and output speed sensor (GA6L45R)
│   │   ├── Removing and installing replacing selector lever position switch302240(GA6L45R)
│   │   ├── Removing and installing replacing torque converter (GA6L45R)
│   │   ├── Removing and installing replacing transmission oil filter (GA6L45R)
│   │   ├── Removing and installing replacing transmission oil filter gasket (GA6L45R)
│   │   ├── Removing and installing sealing or replacing transmission oil sump (GA6L45R)
│   │   ├── Replace radial shaft seal for output flange (GA6L45R)
│   │   ├── Replacing gear selector valve302240(GA6L45R)
│   │   ├── Replacing mechatronics (GA6L45R)
│   │   ├── Replacing sealing plug (GA6L45R)
│   │   ├── Replacing selector shaft (GA6L45R)
│   │   ├── Replacing selector shaft seal (GA6L45R)
│   │   ├── Replacing torque converter radial shaft seal (GA6L45R)
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety instructions for handling oil
│   │   ├── Shift Clutches
│   │   ├── Shift travel valves, parking lock
│   │   ├── Shift Valves, Parking Lock
│   │   ├── Torque converter
│   │   ├── Transmission designations
│   │   ├── Transmission Extension, Bearings, Sealing Ring
│   │   ├── Transmission filling capacities
│   │   ├── Transmission housing, transmission oil sump
│   │   ├── Transmission in general
│   │   ├── Transmission mounting
│   │   ├── Universal BMW transmission take-up
│   │   ├── Universal transmission retaining bridge
│   │   └── Wire Harness, Shift Elements and Sensor
│   ├── 25 Gearshift
│   │   ├── 2516 Overview of tightening torques
│   │   ├── Gearshift bracket - Automatic Transmission
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Removing and installing or replacing gearshift bracket (Steptronic)
│   │   ├── Replacing gaiter (selector lever cover) for shift tower
│   │   └── Replacing grip knob for shift lever
│   ├── 26 Propeller Shaft
│   │   ├── 2611 Overview of tightening torques
│   │   ├── 26 operating fluid overview
│   │   ├── Group 26
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Overview of propeller shaft with universal joint
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Propeller Shaft. complete
│   │   ├── Propeller shaft deflection angles
│   │   ├── Removing and installing propeller shaft (cardan universal joint) completely
│   │   ├── Removing and installing replacing front centring mount for propeller shaft
│   │   ├── Replacing centre mount gaiter
│   │   ├── Replacing complete propeller shaft centre bearing
│   │   ├── Replacing flexible disc for front propeller shaft
│   │   └── Replacing grooved ball bearing in centre mount of propeller shaft
│   ├── 27 Transfer Box
│   │   ├── 27 operating fluid overview
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Main group 27
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   └── Safety instructions for handling oil
│   ├── 28 Twin-Clutch Gearbox (DKG)
│   │   ├── 1.0 Transmission oil for DKG GS7D36SG
│   │   ├── 28 operating fluid overview
│   │   ├── Group 28
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   └── Precautionary measures on vehicles with active pedestrian protection system
│   ├── 31 Front Axle, Front Suspension
│   │   ├── 31 operating fluid overview
│   │   ├── AM3101_00008 - Front axle noise
│   │   ├── Anti-roll bar
│   │   ├── Axle guide and axle strut
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Front axle overview
│   │   ├── Front axle - ride height E93
│   │   ├── Front axle + steering_ wheel chassis alignment check must be carried out after t
│   │   ├── Front Axle Suspension
│   │   ├── General - Track Width Wheelbase E90, E91, E92, E93 Series
│   │   ├── General - Track Width Wheelbase E90, E91, E92, E93 Sport suspension
│   │   ├── General - Track Width Wheelbase E92, E93 US sport suspension
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on replacing shock absorbers
│   │   ├── Instructions (chassis components made of aluminium)
│   │   ├── Layout of spring strut shock absorber
│   │   ├── Lowering raising front axle support (SWZ00-2040)
│   │   ├── Lowering raising front axle support (universal lifter)
│   │   ├── Main group 31
│   │   ├── Measuring ride-level height of vehicle
│   │   ├── Microencapsulated screws
│   │   ├── Mobile table lift
│   │   ├── Notes on removing and installing Low Profile band clamps
│   │   ├── Notes on repairing threads
│   │   ├── Notes on wheel bearing replacement following accident damage
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Raising vehicle with trolley jack
│   │   ├── Removing and installing complete front axle (with spring struts)
│   │   ├── Removing and installing complete left or right spring strut shock absorber
│   │   ├── Removing and installing replacing bearing for front wheel
│   │   ├── Removing and installing replacing both tension struts
│   │   ├── Removing and installing replacing diagonal strut, front end, left
│   │   ├── Removing and installing replacing diagonal strut, front end, right
│   │   ├── (Removing and installing) replacing front left or right spring strut support bearing
│   │   ├── Removing and installing replacing front stabilizer
│   │   ├── Removing and installing replacing left or right trailing link
│   │   ├── Removing and installing replacing left or right wishbone
│   │   ├── Removing and installing replacing protecting skid mounting bracket
│   │   ├── Removing and installing replacing push rod (anti-roll bar link) for left right anti-roll bar
│   │   ├── Removing and installing replacing rear underbody protection
│   │   ├── Removing and installing replacing trailing link on left or right spring strut dome
│   │   ├── Removing and installing replacing underbody protection (front)
│   │   ├── Removing and installing replacing V-strut, front axle carrier, left or right
│   │   ├── Replace wheel bearing
│   │   ├── Replacing front axle support
│   │   ├── Replacing front left or right spring strut shock absorber
│   │   ├── Replacing left right swivel bearing
│   │   ├── Replacing rubber mount in left or right trailing link
│   │   ├── Replacing rubber mounts of stabilizer retaining fixture on front axle carrier
│   │   ├── Replacing rubber mounts on both trailing links
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling oil
│   │   ├── Shock Absorbers E90, E91, E92, E93 Series
│   │   ├── Shock Absorbers E90, E91, E92, E93 Sport suspension, Performance sport suspens
│   │   ├── Spring Struts
│   │   └── Wheel Bearings and Steering Knuckle
│   ├── 32 Steering and Wheel Alignment
│   │   ├── 2.6 Electronic hydraulic steering (EPS)
│   │   ├── 3200 Overview of Technical Data
│   │   ├── 3221 Overview of Technical Data
│   │   ├── 3231 Overview of tightening torques
│   │   ├── 32 operating fluid overview
│   │   ├── Active steering
│   │   ├── Adjusting rear axle
│   │   ├── Adjusting toe-in and camber on front axle
│   │   ├── Adjustment for active front steering
│   │   ├── AM3201_00009 - Steering noise
│   │   ├── Bleeding power steering unit
│   │   ├── Carrying out steering angle sensor adjustment
│   │   ├── Carry out Kinematics Diagnosis System wheel alignment with vehicle load up to design position
│   │   ├── Chassis wheel alignment - normal position E92, E93
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Drop Arm
│   │   ├── Electronic Power Steering
│   │   ├── Front axle + steering_ wheel chassis alignment check must be carried out after t
│   │   ├── General chassis and suspension definitions
│   │   ├── General information and definitions
│   │   ├── Group 32
│   │   ├── Identification of suspension without label
│   │   ├── Identifying suspension from label on front axle
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Instructions for removing and installing ear clips
│   │   ├── Instructions for using special tool 32 4 000
│   │   ├── KDS data statuses
│   │   ├── Kinematics diagnosis system and environment
│   │   ├── Kinematics Diagnosis System wheel alignment with ride height measurement without loading the vehicle
│   │   ├── Microencapsulated screws
│   │   ├── Moving vehicle into design position
│   │   ├── Moving vehicle into normal position
│   │   ├── Notes and specifications for the replacement of the steering gear, steering column and the steering shaft following accident damage
│   │   ├── Notes on checking steering backlash on vehicles with rack-and-pinion steering (with front axle raised)
│   │   ├── Notes on hydraulic line with quick-connect coupling
│   │   ├── Notes on scrapping BMW vehicles with gas generators (central airbag control unit, airbag system)
│   │   ├── Overview of steering
│   │   ├── Overview of steering wheel casing components
│   │   ├── Performing rim runout compensation
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Procedure after airbag deployment as result of an accident
│   │   ├── Pump and Oil Supply E93 N52K, N53, N54, N51, M57T2, S65
│   │   ├── Pump and Oil Supply
│   │   ├── Raising vehicle with trolley jack
│   │   ├── Rear axle_ wheel chassis alignment check must be carried out after the following
│   │   ├── Remove and install (replace) power steering pump for hydraulic steering gear for active steering
│   │   ├── Removing and installing or replacing hydraulic steering vane pump (N51, N52, N53)
│   │   ├── Removing and installing replacing airbag unit (sport steering wheel)
│   │   ├── Removing and installing replacing belt pulley on vane pump for power steering
│   │   ├── Removing and installing replacing control unit for active front steering
│   │   ├── Removing and installing (replacing) electric steering box (EPS)
│   │   ├── Removing and installing replacing fluid reservoir for power steering
│   │   ├── Removing and installing replacing fluid reservoir for power steering with active front steering
│   │   ├── Removing and installing replacing hydraulic steering gear
│   │   ├── Removing and installing (replacing) hydro-steering gear for active steering
│   │   ├── Removing and installing replacing lower section of steering column trim
│   │   ├── Removing and installing replacing lower section of steering shaft
│   │   ├── Removing and installing replacing sport steering wheel
│   │   ├── Removing and installing replacing steering angle sensor
│   │   ├── Removing and installing replacing steering column
│   │   ├── Removing and installing replacing upper section of steering column trim
│   │   ├── Replacing adjusting lever for steering column
│   │   ├── Replacing cooler return line for power steering
│   │   ├── Replacing cover for sport steering wheel
│   │   ├── Replacing delivery line for power steering (N51, N52, N53)
│   │   ├── Replacing gaiter for electric steering gear (EPS) on left or right
│   │   ├── Replacing gaiter for steering gear on left or right
│   │   ├── Replacing intake line for power steering (N51, N52, N53)
│   │   ├── Replacing left or right track rod end
│   │   ├── Replacing (removing and installing) left or right track rod
│   │   ├── Replacing return line for power steering (N51, N52, N53)
│   │   ├── Replacing steering spindle sleeve
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling oil
│   │   ├── Safety regulations for handling components with gas generators
│   │   ├── Steering column
│   │   ├── Steering
│   │   ├── Steering Wheel
│   │   ├── Test conditions for chassis wheel alignment check
│   │   ├── Visible corrosion on vehicle add-on parts
│   │   ├── Wheel Alignment E90, E91, E92, E93 Low-slung sport suspension
│   │   ├── Wheel Alignment E90, E91, E92, E93 Series
│   │   └── Wheel Alignment E92, E93 SPORT SUSPENSION US version
│   ├── 33 Rear Axle, Rear-Wheel Drive, Guide
│   │   ├── 33 operating fluid overview
│   │   ├── AM3301_90574 - Rear axle differential noise
│   │   ├── Anti-roll bar
│   │   ├── Axle guide and axle strut
│   │   ├── B3310_HAGMECH1 - Rear axle differential leakage
│   │   ├── Changing rear axle transmission fluid with the oil gun
│   │   ├── Checking topping up oil level in rear axle final drive
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Detaching wheel bearing inner race from drive flange (drive flange removed)
│   │   ├── Final drive oil - new oil quality from 07 2011
│   │   ├── General - track width E92, E93 Series
│   │   ├── General - track width E92, E93 Sport suspension
│   │   ├── General - track width E92, E93 SPORT SUSPENSION US version
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on replacing shock absorbers
│   │   ├── Kinematics diagnosis system and environment
│   │   ├── Lowering raising rear axle support (SWZ00-2040)
│   │   ├── Lowering raising rear axle support (universal lifter)
│   │   ├── Main group 33
│   │   ├── Measuring ride-level height of vehicle
│   │   ├── Microencapsulated screws
│   │   ├── Notes on repairing threads
│   │   ├── Notes on wheel bearing replacement following accident damage
│   │   ├── Output Shaft
│   │   ├── Overview of rear axle final drive output shafts
│   │   ├── Overview of rear axle final drives (with connected propeller shaft) output shafts
│   │   ├── Overview of rear axle support with rubber mounts
│   │   ├── Overview of steering links
│   │   ├── Pressing output shaft out of drive flange and drawing in (output shaft removed from rear axle final drive)
│   │   ├── Raising vehicle with trolley jack
│   │   ├── Rear axle final drive, 188LW
│   │   ├── Rear axle final drive_ Assignment to model series
│   │   ├── Rear axle final drive
│   │   ├── Rear axle final drive suspension
│   │   ├── Rear axle layout
│   │   ├── Rear axle - ride height E93
│   │   ├── Rear Axle Suspension
│   │   ├── Rear axle_ wheel chassis alignment check must be carried out after the following
│   │   ├── Rear Differential Case with Cover
│   │   ├── Removing and installing complete rear axle support
│   │   ├── Removing and installing replacing a steering stub wheel carrier
│   │   ├── Removing and installing replacing left or right camber arm
│   │   ├── Removing and installing replacing left or right toe arm
│   │   ├── Removing and installing replacing left or right trailing link (on rear axle) (from 03 2007)
│   │   ├── Removing and installing replacing left or right underbody cover
│   │   ├── Removing and installing replacing left output shaft
│   │   ├── Removing and installing replacing rear anti-roll bar
│   │   ├── Removing and installing replacing rear differential
│   │   ├── Removing and installing replacing rear left or right coil spring
│   │   ├── Removing and installing replacing rear left or right shock absorber
│   │   ├── Removing and installing replacing rear middle tension strut (from 03 2007)
│   │   ├── Removing and installing replacing right output shaft
│   │   ├── Removing and installing replacing vibration absorber
│   │   ├── Replace gaiter of right output shaft
│   │   ├── Replace the radial shaft seal for the left or right drive flange
│   │   ├── Replacing a ball joint in lower steering knuckle wheel carrier
│   │   ├── Replacing a control arm
│   │   ├── Replacing all front rubber mounts for rear differential mounting
│   │   ├── Replacing anti-roll bar link for anti-roll bar on left or right
│   │   ├── Replacing a rubber mount for trailing arm in rear axle support
│   │   ├── Replacing both gaiters on left or right output shaft (on 2-flow exhaust system)
│   │   ├── Replacing both rubber mounts for anti-roll bar mounting
│   │   ├── Replacing cover gasket on rear axle final drive at rear (168L)
│   │   ├── Replacing drive flange on left or right of rear axle final drive
│   │   ├── Replacing drive flange on left or right rear axle shaft (on 2-flow exhaust system)
│   │   ├── Replacing left drive flange on rear axle shaft
│   │   ├── Replacing left or right rear axle carrier compression strut
│   │   ├── Replacing left or right trailing arm
│   │   ├── Replacing one upper control arm
│   │   ├── Replacing radial shaft seal for drive flange on rear axle final drive (inserted propeller shaft)
│   │   ├── Replacing radial shaft seal for input flange of rear axle differential
│   │   ├── Replacing rear axle support
│   │   ├── Replacing rear cover gasket on rear axle final drive (188L 188LW)
│   │   ├── Replacing rear cover gasket on rear axle final drive (215L 215LW)
│   │   ├── Replacing rear cover gasket on rear axle final drive
│   │   ├── Replacing rear left or right rubber mount for shock absorber mount
│   │   ├── Replacing rubber mount for camber arm in rear axle support
│   │   ├── Replacing rubber mount for rear differential mounting at rear
│   │   ├── Replacing rubber mount for trailing arm in wheel carrier
│   │   ├── Replacing rubber mount (with hydraulic damping)
│   │   ├── Replacing support bearing (lower section) for rear left or right spring strut shock absorber
│   │   ├── Replacing two rubber mounts (front) for rear axle carrier
│   │   ├── Replacing two rubber mounts (rear) for rear axle carrier
│   │   ├── Replacing wheel bearing of rear axle shaft on right
│   │   ├── Replacing wheel bearing on left or right rear axle shaft (on 2-flow exhaust system)
│   │   ├── Replacing wheel bearing (outside diameter 75 mm) on rear axle shaft
│   │   ├── Replacing wheel bearing (outside diameter 85 mm) on rear axle shaft
│   │   ├── Ribbed teeth
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety instructions for handling oil
│   │   ├── Shock Absorbers
│   │   ├── Visible corrosion on vehicle add-on parts
│   │   └── Wheel Bearings
│   ├── 34 Brakes
│   │   ├── 1.1.13 Brake pads
│   │   ├── 1.1.14 Brake drums, brake discs
│   │   ├── 1.1.6 Duo-servo parking brake
│   │   ├── 1.1.6 Electronic parking brake
│   │   ├── 1.1.6 Parking brake, operating lever, reversible ratchet
│   │   ├── 1.2.1 Service brake_ Effect
│   │   ├── 1.3.1 Auxiliary brake (emergency braking)_ Effect
│   │   ├── 1.4.1 Parking brake_ Effect
│   │   ├── 1.6 Antilock Brake System (ABS)
│   │   ├── 1.7 Electronic brake system (EBS)
│   │   ├── 3411 Overview of tightening torques
│   │   ├── 3421 Overview of tightening torques
│   │   ├── 3451 Overview of tightening torques
│   │   ├── 34 operating fluid overview
│   │   ├── Adjusting handbrake
│   │   ├── AM3401_00328 - Brake noise
│   │   ├── AM3402_00233 - Brake malfunction
│   │   ├── AM3405_00455 - Brakes, optical complaint
│   │   ├── Bleeding brake system with DSC
│   │   ├── Brake Lines
│   │   ├── Brake servo
│   │   ├── Checking brake booster (vacuum test)
│   │   ├── Checking brake discs
│   │   ├── Checking brakes on test stand
│   │   ├── Checking parking brake setting (vehicle check for service)
│   │   ├── Checking thickness of brake pad
│   │   ├── Dynamic Stability Control Mk60E5 E85, E86, E87, E90, E91, E92, E93
│   │   ├── Front Brake, BMW, E93
│   │   ├── Front Brake
│   │   ├── General information on braking in new brake discs brake pads
│   │   ├── General Information
│   │   ├── Group 34
│   │   ├── Guideline for applying brake pad paste on brake pads and caliper carrier
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on using cleaning agent paints (personal protection equipment)
│   │   ├── Instruction for replacement brake pads brake discs
│   │   ├── Master Brake Cylinder
│   │   ├── Microencapsulated screws
│   │   ├── Modified procedure for replacing brake pads
│   │   ├── Modified wear limit for brake disc brake pad replacement
│   │   ├── Overhauling left or right front brake caliper (brake caliper removed)
│   │   ├── Overhauling left or right front brake caliper (Brembo) (brake caliper removed)
│   │   ├── Overhauling left or right rear brake caliper (brake caliper removed)
│   │   ├── Overhauling left or right rear brake caliper (Brembo) (brake caliper removed)
│   │   ├── Overview of brake lines
│   │   ├── Overview of brake master cylinder brake booster
│   │   ├── Overview of brakes
│   │   ├── Overview of electronic components
│   │   ├── Overview of front brakes
│   │   ├── Overview of handbrake
│   │   ├── Overview of rear brake
│   │   ├── Parking Brake E93
│   │   ├── Parking brake function check
│   │   ├── Parking brake
│   │   ├── Pedal Assembly Console
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Precision-turning both front brake discs on both sides
│   │   ├── Precision-turning both rear brake discs on both sides
│   │   ├── Rear Brake, BMW, E93
│   │   ├── Rear Brake
│   │   ├── Removing and installing or replacing brake booster
│   │   ├── Removing and installing or replacing brake pads on both front disc brakes (Teves floating caliper)
│   │   ├── Removing and installing or replacing brake pads on both rear disc brakes (Teves floating caliper)
│   │   ├── Removing and installing or replacing front left or right brake caliper (Teves)
│   │   ├── Removing and installing or replacing gaiter for handbrake lever
│   │   ├── Removing and installing or replacing guide tube for handbrake cables
│   │   ├── Removing and installing or replacing rear left or right brake caliper (Teves)
│   │   ├── Removing and installing renewing all parking brake pads
│   │   ├── Removing and installing renewing both brake discs
│   │   ├── Removing and installing replacing a brake carrier brake guard plate at front
│   │   ├── Removing and installing replacing both front brake discs (Brembo)
│   │   ├── Removing and installing replacing both front brake discs
│   │   ├── Removing and installing replacing both parking brake Bowden cables
│   │   ├── Removing and installing replacing both rear brake discs (Brembo)
│   │   ├── Removing and installing replacing brake pads on both front disc brakes (Brembo)
│   │   ├── Removing and installing replacing brake pads on both front disc brakes (N54 M57T2 Top N57)
│   │   ├── Removing and installing replacing brake pads on both rear disc brakes (Brembo)
│   │   ├── Removing and installing replacing DSC control unit
│   │   ├── Removing and installing replacing DSC hydraulic unit
│   │   ├── Removing and installing replacing DSC sensor
│   │   ├── Removing and installing replacing expander for parking brake shoes
│   │   ├── Removing and installing replacing expansion tank for hydraulic brake actuation
│   │   ├── Removing and installing replacing front left or right brake caliper (Brembo)
│   │   ├── Removing and installing replacing handbrake lever
│   │   ├── Removing and installing replacing left or right front brake caliper
│   │   ├── Removing and installing replacing master brake cylinder for DSC
│   │   ├── Removing and installing replacing non-return valve for brake booster
│   │   ├── Removing and installing replacing rear left or right brake caliper (Brembo)
│   │   ├── Replacing a brake pad sensor (front)
│   │   ├── Replacing a brake pad sensor (rear)
│   │   ├── Replacing all brake pipes
│   │   ├── Replacing a rear pulse sensor
│   │   ├── Replacing fluid in brake system
│   │   ├── Replacing front left or right brake hose
│   │   ├── Replacing handle for handbrake lever
│   │   ├── Replacing one front pulse sensor
│   │   ├── Replacing one rear wheel speed sensor PREMIUM
│   │   ├── Replacing rear left (or right) brake carrier
│   │   ├── Replacing rear left or right brake hose (between brake caliper and pipe)
│   │   ├── Replacing rear left or right brake hose (between rear axle support and body)
│   │   ├── Replacing the DSC hydraulic control unit
│   │   ├── Replacing vacuum hose for brake booster (N52 on brake booster)
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Slip control system (DSC)
│   │   ├── Specifications for brake performance testing as part of regular periodic vehicle inspections as prescribed in 30224730224029302240StVZO German Motor Vehicle Safety Standards, BMW, E93
│   │   ├── Testing and bleeding brakes E93
│   │   ├── Testing and bleeding brakes
│   │   └── Turning brake disc
│   ├── 35 Pedals
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Overview of pedals
│   │   ├── Parking brake
│   │   ├── Pedal Assembly Console
│   │   ├── Pedals
│   │   ├── Removing and installing complete bearing block for foot pedal
│   │   ├── Removing and installing or replacing accelerator pedal module
│   │   ├── Removing and installing or replacing clutch pedal
│   │   ├── Removing and installing replacing over-centre helper spring
│   │   ├── Replacing bearing bushes for clutch pedal
│   │   ├── Replacing spring for brake pedal
│   │   └── Replacing spring for clutch pedal
│   ├── 36 Wheels with Tyres
│   │   ├── 3610 Overview of tightening torques
│   │   ├── 36 operating fluid overview
│   │   ├── 5.2.2 Wheels
│   │   ├── 5.2.3 Tyres
│   │   ├── Checking front and rear wheel for lateral and radial runout
│   │   ├── Checking one road wheel on balancing machine for lateral and radial runout (wheel removed)
│   │   ├── Checking rim for lateral and radial runout
│   │   ├── Cosmetic repairs on aluminium rims
│   │   ├── General information on light alloy disc wheels
│   │   ├── Group 36
│   │   ├── Inflating tyres with nitrogen (N2) All series
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Initialising Run Flat Indicator (RPA)
│   │   ├── Kinematics diagnosis system and environment
│   │   ├── Notes and specifications for tyre wheel exchange
│   │   ├── Overview of wheels and tyres
│   │   ├── Performing a reset of the RDC (tyre pressure control)
│   │   ├── Recommendation for heating tyres before removing or fitting
│   │   ├── Remove or install front or rear wheel
│   │   ├── Removing and installing RDC (Tyre Pressure Control) control unit (LOW COST)
│   │   ├── Removing and installing replacing an RDC trigger transmitter (front)
│   │   ├── Removing and installing replacing an RDC trigger transmitter (rear)
│   │   ├── Removing and installing replacing a tyre pressure control electronic wheel module (Generation I)
│   │   ├── Removing and installing replacing RDC receiving aerial
│   │   ├── Removing and installing (replacing) RDC (Tyre Pressure Control) control unit
│   │   ├── Removing and installing replacing RDC wheel electronics (Generation II Generation III)
│   │   ├── Repairing runflat tyres All models
│   │   ├── Replacing a runflat tyre or a UHP tyre
│   │   ├── Replacing a tyre
│   │   ├── Run Flat Indicator All models
│   │   ├── Stationary wheel balancing
│   │   ├── Subsequent installation of wheel-bolt lock
│   │   ├── Wheel Rims
│   │   ├── Wheels One-part alloy wheels
│   │   ├── Wheels
│   │   ├── Wheels Steel and aluminium strip wheels
│   │   └── Wheels Two-part alloy wheels
│   ├── 37 Integrated Suspension Systems
│   │   ├── Danger of poisoning if oil is ingested absorbed through the skin
│   │   ├── Electric Components
│   │   ├── Group 37
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Replacing front ride height sensor
│   │   ├── Replacing rear ride height sensor
│   │   ├── Risk of injury if oil comes into contact with eyes and skin
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   └── Safety instructions for handling oil
│   ├── 41 Body
│   │   ├── 0 Contents of Body, General
│   │   ├── 0302240Notes on the repair technique used in the main group 41
│   │   ├── 41 operating fluid overview
│   │   ├── 6.1.3 Fuel tank and fuel lines (including heater fuel tank and lines)
│   │   ├── Active pedestrian protection procedure following an accident
│   │   ├── Adjust door
│   │   ├── Adjusting convertible top compartment lid
│   │   ├── Adjusting engine compartment lid (for vehicles with active pedestrian protection AFGS)
│   │   ├── Adjusting engine compartment lid
│   │   ├── Adjusting rear lid
│   │   ├── Blind rivet
│   │   ├── Bonding aluminium on steel
│   │   ├── Bonding on painted primed surfaces
│   │   ├── Bonding steel on steel
│   │   ├── Check actuator
│   │   ├── Checking hinge for engine compartment lid (for vehicles with active pedestrian protection system)
│   │   ├── Convertible top compartment lid
│   │   ├── Corrosion protection
│   │   ├── Cosmetic repairs on aluminium rims
│   │   ├── Dent repairs without damaging paintwork
│   │   ├── EMC screws
│   │   ├── Engine compartment lid
│   │   ├── Fix bolts on the new part
│   │   ├── Frame alignment control dimensions, body
│   │   ├── Front doors
│   │   ├── Front trim panel
│   │   ├── Fuel filler flap emergency release
│   │   ├── Gap dimensions, body
│   │   ├── General instructions on paintwork
│   │   ├── General notes for labelling with adhesive films
│   │   ├── General notes regarding bonding
│   │   ├── Grinding aluminium components
│   │   ├── Grinding steel parts
│   │   ├── Handling airbags and restraint systems
│   │   ├── Handling components after flood damage
│   │   ├── Handling electrical system and electronics
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on hazards
│   │   ├── Information on metal filler
│   │   ├── Information on using cleaning agent paints (personal protection equipment)
│   │   ├── Information on vehicle protection
│   │   ├── Information warning labels
│   │   ├── Installation solution for straight shank hexagon rivet nut
│   │   ├── Installing a cavity sealing with 2-component PU cavity foam
│   │   ├── Installing cavity sealing (expanded)
│   │   ├── Installing cavity sealing (not expanded)
│   │   ├── Materials science
│   │   ├── Min max tolerance sample catalogue for paintwork and corrosion damage
│   │   ├── New BMW paint brochure
│   │   ├── New repair methods 342200235Gluing Riveting342200235 on steel bodies
│   │   ├── Notes and specifications for the replacement of the steering gear, steering column and the steering shaft following accident damage
│   │   ├── Notes on adhesive302240K1
│   │   ├── Notes on adhesive302240K2
│   │   ├── Notes on adhesive302240K3
│   │   ├── Notes on adhesive302240K4
│   │   ├── Notes on adhesive302240K5
│   │   ├── Notes on adhesive302240K6
│   │   ├── Notes on cleaning agent302240R1
│   │   ├── Notes on handling the high pressure cleaner
│   │   ├── Notes on repairing threads
│   │   ├── Notes on replacing the door
│   │   ├── Notes on the water drain hose of the slide tilt sunroof
│   │   ├── Notes on using temperature-controlled infra-red radiators
│   │   ├── Opening bonded connections
│   │   ├── Opening brazed connections
│   │   ├── Opening rivet connections
│   │   ├── Opening welded connections
│   │   ├── Overview of adhesive cartridge guns
│   │   ├── Overview of consumables (Electronic Parts Catalogue)
│   │   ├── Position of shaped parts for cavity acoustic baffle
│   │   ├── Procedure for folding hardtop after an accident
│   │   ├── Punch rivets
│   │   ├── Quality standard
│   │   ├── Rear lid
│   │   ├── Reinforcement plate (bonded)
│   │   ├── Reinforcement plate
│   │   ├── Reinforcement plate with stud bolt (bonded or welded)
│   │   ├── Releasing bonded folded seam connections
│   │   ├── Removal requirements - replacing the left luggage compartment floor (tail panel or side panel removed)
│   │   ├── Removing and installing door
│   │   ├── Removing and installing engine compartment lid (active pedestrian protection AFGS)
│   │   ├── Removing and installing engine compartment lid
│   │   ├── Removing and installing flap for fuel filler neck
│   │   ├── Removing and installing replacing left hinge for engine compartment lid, (for vehicles with active pedestrian protection AFGS)
│   │   ├── Removing and installing replacing left or right actuator (active pedestrian protection)
│   │   ├── Removing and installing replacing multifunction pan
│   │   ├── Removing and installing replacing seal for tailgate
│   │   ├── Removing and installing replacing side panel, front left or right
│   │   ├── Removing and installing soft top compartment lid
│   │   ├── Removing and installing tailgate
│   │   ├── Repairing headlights
│   │   ├── Repairing plastic components
│   │   ├── Repair methods, repair stages 1
│   │   ├── Repair of corrosion damage
│   │   ├── Repair solution for straight shank hexagon rivet nut
│   │   ├── Repair techniques, repair stage 2
│   │   ├── Repair techniques, repair stage 3
│   │   ├── Replacing blind rivets
│   │   ├── Replacing complete cowl panel
│   │   ├── Replacing complete rear left wheel arch (rear left side panel removed)
│   │   ├── Replacing complete rear luggage compartment floor (tail panel removed)
│   │   ├── Replacing complete rear tension strut mounting
│   │   ├── Replacing complete tail panel
│   │   ├── Replacing cover bowl
│   │   ├── Replacing cover for left or right frame side member (partial replacement between A- and B-pillars)
│   │   ├── Replacing door hinge bushing (door removed)
│   │   ├── Replacing front left door pillar (front side panel removed)
│   │   ├── Replacing front left or right carrier support (partial replacement, front side panel removed)
│   │   ├── Replacing front left or right side wall holder
│   │   ├── Replacing front left outer door pillar section
│   │   ├── Replacing front left wheel arch
│   │   ├── Replacing front section of engine support to left wheel arch
│   │   ├── Replacing front section of left engine support
│   │   ├── Replacing front wall
│   │   ├── Replacing inner left or right frame side member cover partial replacement
│   │   ├── Replacing left engine support (partial replacement before front axle)
│   │   ├── Replacing luggage compartment floor (complete with both inner wheel arch sections, tail panel removed)
│   │   ├── Replacing luggage compartment floor (complete with left or right inner wheel arch section, tail panel removed)
│   │   ├── Replacing luggage compartment floor, left section (Tail panel or side wall removed)
│   │   ├── Replacing middle luggage compartment floor (tail panel has been removed)
│   │   ├── Replacing rear left outer wheel arch section (rear left side panel removed)
│   │   ├── Replacing rear left side panel (partial replacement behind wheel arch)
│   │   ├── Replacing rear left side panel
│   │   ├── Replacing right luggage compartment floor (rear side panel and tail panel removed)
│   │   ├── Replacing soft top compartment lid gasket
│   │   ├── Replacing wheel arch trim on front left or right side panel (Japanese national-market version)
│   │   ├── Riveting steel components
│   │   ├── Safety at work
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling magnets
│   │   ├── Separating cut determination with a template
│   │   ├── Setting blind rivet nuts and bolts
│   │   ├── Side walls
│   │   ├── Spot-weld bonding steel components
│   │   ├── Spray gun for cavity sealant
│   │   ├── Stamping vehicle identification number
│   │   ├── Straightening aluminium component on the outer skin
│   │   ├── Straightening aluminium components in structure
│   │   ├── Straightening steel components
│   │   ├── Stripping down - Replacing front section of engine support with left wheel arch
│   │   ├── Stripping operations - Replacing complete rear luggage compartment floor (tail panel removed)
│   │   ├── Stripping operations - Replacing left carrier support
│   │   ├── Stripping operations - Replacing left engine support (partial replacement before front axle)
│   │   ├── Stripping operations - Replacing luggage compartment floor, middle (tail panel removed)
│   │   ├── Stripping operations - Replacing rear side panel, left
│   │   ├── Stripping operations - Replacing tail panel
│   │   ├── Stripping work - replacing front left wheel arch
│   │   ├── Touching up paintwork damage
│   │   ├── Transferring hole pattern
│   │   ├── Use of materials in outer skin
│   │   ├── Vehicle identification number, general
│   │   ├── Visible corrosion on vehicle add-on parts
│   │   ├── Welding and soldering steel components
│   │   ├── Welding in reinforcement plate (sheet steel)
│   │   ├── Working with 2-component PU cavity foam
│   │   └── Workshop equipment (BMW and MINI vehicles)
│   ├── 51 Body Equipment
│   │   ├── 5116 Overview of tightening torques
│   │   ├── 5143 Overview of tightening torques
│   │   ├── 5145 Overview of tightening torques
│   │   ├── 5147 Overview of tightening torques
│   │   ├── 5171 Overview of tightening torques
│   │   ├── 51 operating fluid overview
│   │   ├── Adjusting engine compartment lid catch
│   │   ├── Adjusting front left or right door detent (lock wedge)
│   │   ├── Adjusting left or right front side window
│   │   ├── Adjusting left or right striker on engine hood
│   │   ├── Adjusting rear left or right side window
│   │   ├── Adjusting rear lid lock
│   │   ├── Adjusting replacing bump stops
│   │   ├── AM5101_00036 - Exterior rearview mirror noise
│   │   ├── AM5102_00010 - Exterior mirror malfunction
│   │   ├── AM5102_00035 - Door lock malfunction
│   │   ├── B4162_HKLMECH1- Rear area malfunction - Malfunction at the tailgate
│   │   ├── Blocking, if necessary initialising, car key in immobiliser control module
│   │   ├── Calibrating compass in inside mirror (up to 09 08)
│   │   ├── Calibrating compass in interior rearview mirror (from 09 08)
│   │   ├── Check actuator
│   │   ├── Cleaning and care of leather in vehicles All model series
│   │   ├── Disassembling and assembling lock barrel (lock barrel removed)
│   │   ├── Electrical operation of the side window
│   │   ├── Engine compartment lid catch locks
│   │   ├── Fix bolts on the new part
│   │   ├── Front bumper
│   │   ├── Front Door Locks
│   │   ├── Front door trim panel with armrests
│   │   ├── Front licence plate holder All models
│   │   ├── Gaskets and loose body components
│   │   ├── General notes for labelling with adhesive films
│   │   ├── General procedure for the disassembly and installation of bonded window glass
│   │   ├── Gluing of mirror base
│   │   ├── Information for handling the documents repair instructions, technical data, AZD
│   │   ├── Installing replacing number license plate (without base)
│   │   ├── Instructions for attaching number letter designation combination
│   │   ├── Interior mirror with digital compass
│   │   ├── Materials for bonding window
│   │   ├── Mirrors, Finishers, Ashtrays, Consoles
│   │   ├── Normalization of power window units
│   │   ├── Notes for bonding sound insulation (SI), doors
│   │   ├── Notes on component bonding with adhesive tape
│   │   ├── Notes on fitting covers in front wheel arch
│   │   ├── Notes on installing rubber window seals
│   │   ├── Notes on window bonding
│   │   ├── Notes on window bonding repair kit
│   │   ├── Overview of consumables (Electronic Parts Catalogue)
│   │   ├── Overview of front bumper
│   │   ├── Overview of front door locks
│   │   ├── Overview of instrument panel
│   │   ├── Overview of luggage compartment trim panels
│   │   ├── Overview of rear bumper
│   │   ├── Overview of rear console
│   │   ├── Overview of removing and installing replacing door lock in left or right front door
│   │   ├── Overview of storage compartment (centre console)
│   │   ├── Overview, rain sensor (additional work when replacing the windscreen sensor replacement)
│   │   ├── Panel, rear parcel shelf, roller sun blind
│   │   ├── Power windows, front
│   │   ├── Rear Bumper
│   │   ├── Rear lid locks
│   │   ├── Reinforcement, body
│   │   ├── Remove and install cowl panel cover
│   │   ├── Remove windscreen with Roll Out 2000
│   │   ├── Removing and installing carrier for instrument panel
│   │   ├── Removing and installing complete rear left or right power window unit
│   │   ├── Removing and installing cover for luggage compartment
│   │   ├── Removing and installing front bumper trim
│   │   ├── Removing and installing instrument panel trim
│   │   ├── Removing and installing left or right front door trim panel
│   │   ├── Removing and installing or replacing front air outlet trim grille
│   │   ├── Removing and installing or replacing inside door opener in left or right front door
│   │   ├── Removing and installing or replacing left or right gas pressure spring for tailgate
│   │   ├── Removing and installing or replacing mirror on left or right front door
│   │   ├── Removing and installing or replacing outer window cavity cover strip for door window, rear left or right
│   │   ├── Removing and installing or replacing outside door handle from left or right front door
│   │   ├── Removing and installing or replacing retaining ring on left or right exterior mirror
│   │   ├── Removing and installing or replacing sun visor and left or right counter-support
│   │   ├── Removing and installing or replacing trim for roof pillar at front (A-pillar), left or right
│   │   ├── Removing and installing or replacing trim panel for cover on left or right side member
│   │   ├── Removing and installing or replacing trim strip on roof gutter at left or right
│   │   ├── Removing and installing or replacing window cavity cover strip on outside of left or right front door
│   │   ├── Removing and installing rear bumper trim
│   │   ├── Removing and installing renewing cover on outside handle with lock cylinder
│   │   ├── Removing and installing renewing inside mirror (with Japanese inside mirror with electronic toll function)
│   │   ├── Removing and installing renewing windscreen
│   │   ├── Removing and installing replacing arrester hook on engine hood
│   │   ├── Removing and installing replacing bar for retaining hook
│   │   ├── Removing and installing replacing battery cover
│   │   ├── Removing and installing replacing bottom right trim for instrument panel
│   │   ├── Removing and installing replacing Bowden cable for inside door opener on left or right front door
│   │   ├── Removing and installing replacing Bowden cable for outside door handle on left or right front door
│   │   ├── Removing and installing replacing bump stop with ejector for filler flap
│   │   ├── Removing and installing replacing button for tailgate activation
│   │   ├── Removing and installing replacing cable for front engine hood locks (to passenger compartment)
│   │   ├── Removing and installing replacing cable for front hood bonnet locks (to locks)
│   │   ├── Removing and installing replacing carrier for left or right outside door handle with lock cylinder
│   │   ├── Removing and installing replacing carrier for left or right outside door handle without lock cylinder
│   │   ├── Removing and installing replacing centre armrest
│   │   ├── Removing and installing replacing centre grille for bumper trim
│   │   ├── Removing and installing replacing complete lock cylinder in left or right front
│   │   ├── Removing and installing replacing cover for armrest on driver door
│   │   ├── Removing and installing replacing cover for carbon canister
│   │   ├── Removing and installing replacing cover for headlight washer system on left
│   │   ├── Removing and installing replacing cover on front door handle (passenger side)
│   │   ├── Removing and installing replacing cover on outside handle
│   │   ├── Removing and installing replacing cowl panel seal
│   │   ├── Removing and installing replacing damper for glovebox
│   │   ├── Removing and installing replacing decorative strip on front left or right door trim panel
│   │   ├── Removing and installing replacing decorative strip on left or right side trim panel
│   │   ├── Removing and installing replacing diagonal strut, front end, left
│   │   ├── Removing and installing replacing diagonal strut, front end, right
│   │   ├── Removing and installing replacing door lock in left or right front door
│   │   ├── Removing and installing replacing door pocket trim
│   │   ├── Removing and installing replacing door stop on left or right front door
│   │   ├── Removing and installing replacing door window glass, front left or right
│   │   ├── Removing and installing replacing finishing strip at front left or right entra
│   │   ├── Removing and installing replacing flap in luggage compartment trim on right
│   │   ├── Removing and installing replacing front BMW badge
│   │   ├── Removing and installing replacing front carpet for passenger compartment
│   │   ├── Removing and installing replacing front (inner or outer) cup holder
│   │   ├── Removing and installing replacing front (inside) left or right entrance cover strip
│   │   ├── Removing and installing replacing front left or right wheel arch cover (front section)
│   │   ├── Removing and installing replacing front left or right wheel arch cover (rear section)
│   │   ├── Removing and installing replacing front radiator grille, middle left or right
│   │   ├── Removing and installing replacing front rollover protection system strut
│   │   ├── Removing and installing replacing front section of rear console trim
│   │   ├── Removing and installing replacing guide for rear centre bumper
│   │   ├── Removing and installing replacing holder for bumper at rear left
│   │   ├── Removing and installing replacing holder for bumper at rear right
│   │   ├── Removing and installing replacing housing on left or right door mirror
│   │   ├── Removing and installing replacing insert for centre console
│   │   ├── Removing and installing replacing inside mirror (with high-beam assistant)
│   │   ├── Removing and installing replacing inside mirror (with mirror arm end caps)
│   │   ├── Removing and installing replacing inside mirror (with rain sensor)
│   │   ├── Removing and installing replacing instrument panel trim on right
│   │   ├── Removing and installing replacing insulation lining on hood bonnet
│   │   ├── Removing and installing replacing interior rearview mirror (overview)
│   │   ├── Removing and installing (replacing) left decorative strip on instrument panel
│   │   ├── Removing and installing replacing left hood bonnet lock
│   │   ├── Removing and installing replacing left luggage compartment wheel arch trim
│   │   ├── Removing and installing replacing left or right actuator (active pedestrian protection)
│   │   ├── Removing and installing replacing left or right gas pressure spring for engine compartment lid
│   │   ├── Removing and installing replacing left or right steering box cover
│   │   ├── Removing and installing replacing left or right striker for rear lid lock
│   │   ├── Removing and installing replacing left or right trailing link (on rear axle) (from 03 2007)
│   │   ├── Removing and installing replacing left or right underbody cover
│   │   ├── Removing and installing replacing left or right underbody panelling
│   │   ├── Removing and installing replacing left spring support passage cover
│   │   ├── Removing and installing replacing light strip in side trim panel
│   │   ├── Removing and installing replacing lock barrel for front passenger airbag deactivation
│   │   ├── Removing and installing replacing lock element (lock cylinder) for rear lid
│   │   ├── Removing and installing replacing lock for right glovebox
│   │   ├── Removing and installing replacing luggage compartment floor trim panel
│   │   ├── Removing and installing replacing luggage compartment trim panel on right side panel
│   │   ├── Removing and installing replacing multifunction pan
│   │   ├── Removing and installing replacing panel for luggage compartment partition
│   │   ├── Removing and installing replacing panel for luggage compartment side member on left or right
│   │   ├── Removing and installing replacing panel for main bearing on left or right
│   │   ├── Removing and installing replacing panel for passenger compartment partition
│   │   ├── Removing and installing replacing panel for pedals
│   │   ├── Removing and installing replacing panel for rear lid
│   │   ├── Removing and installing (replacing) power window unit in left or right front door
│   │   ├── Removing and installing replacing protecting skid mounting bracket
│   │   ├── Removing and installing replacing radiator seal
│   │   ├── Removing and installing replacing rear carpet on seat pan
│   │   ├── Removing and installing replacing rear console
│   │   ├── Removing and installing replacing rear cup holder
│   │   ├── Removing and installing replacing rear left or right lower side trim section
│   │   ├── Removing and installing replacing rear left or right upper side trim section
│   │   ├── Removing and installing replacing rear left or right wheel arch cover
│   │   ├── Removing and installing replacing rear lid lock
│   │   ├── Removing and installing replacing rear middle tension strut (from 03 2007)
│   │   ├── Removing and installing replacing rear model designation
│   │   ├── Removing and installing replacing rear section of rear console trim
│   │   ├── Removing and installing replacing rear underbody protection
│   │   ├── Removing and installing replacing rear window
│   │   ├── Removing and installing replacing retaining strip for cowl panel cover
│   │   ├── Removing and installing (replacing) right decorative strip on dashboard
│   │   ├── Removing and installing replacing right engine hood bonnet lock
│   │   ├── Removing and installing replacing right luggage compartment wheel arch trim
│   │   ├── Removing and installing replacing right spring support passage cover
│   │   ├── Removing and installing replacing rubber frame for windscreen
│   │   ├── Removing and installing replacing seal for tailgate
│   │   ├── Removing and installing replacing seal on front door, left or right
│   │   ├── Removing and installing replacing side grille for bumper trim
│   │   ├── Removing and installing replacing side trim panel, footwell, on A-pillar, left (driver side)
│   │   ├── Removing and installing replacing side trim panel, footwell, on A-pillar, right
│   │   ├── Removing and installing replacing sound insulation in left or right front door
│   │   ├── Removing and installing replacing speaker trim on left or right side trim panel
│   │   ├── Removing and installing replacing storage tray in luggage compartment on left
│   │   ├── Removing and installing replacing support for front bottom bumper panel
│   │   ├── Removing and installing replacing support for front bumper panel
│   │   ├── Removing and installing replacing support for rear bumper panel
│   │   ├── Removing and installing replacing top cooling air guide
│   │   ├── Removing and installing replacing top trim on rear apron
│   │   ├── Removing and installing replacing trailing link on left or right spring strut dome
│   │   ├── Removing and installing replacing trim for luggage compartment at rear left or right
│   │   ├── Removing and installing replacing trim for preselector lever
│   │   ├── Removing and installing replacing trim for rear lid on left or right
│   │   ├── Removing and installing replacing trim on air outlet grille
│   │   ├── Removing and installing replacing trunk trim panel on left side panel
│   │   ├── Removing and installing replacing underbody protection (front)
│   │   ├── Removing and installing replacing upper section on rear left or right armrest
│   │   ├── Removing and installing replacing vibration damper
│   │   ├── Removing and installing replacing V-strut, front axle carrier, left or right
│   │   ├── Removing and installing replacing window cavity cover strip on inner front door
│   │   ├── Removing and installing replacing window cavity cover strip on outside of front door
│   │   ├── Removing and installing right glovebox with housing
│   │   ├── Removing and installing storage compartment
│   │   ├── Removing and installing trim for storage compartment
│   │   ├── Removing installing ball sockets with clip
│   │   ├── Removing refitting replacing rear engine undercover
│   │   ├── Removing weather strip with special tool 00 9 324 at front or rear
│   │   ├── Removing windows with an oscillating knife
│   │   ├── Removing windows with a Spider
│   │   ├── Repairing damage to windscreens caused by stone chips (clear and tinted laminated safety glass)
│   │   ├── Repair of damage caused by stone chips on the windshied
│   │   ├── Replace bumper panel, front
│   │   ├── Replace one of the drink holder covers in front (inner or outer)
│   │   ├── Replacing ashtray insert
│   │   ├── Replacing baseplate for license plate
│   │   ├── Replacing blind rivets
│   │   ├── Replacing both holders for rear bumper
│   │   ├── Replacing complete trailer tow hitch
│   │   ├── Replacing cover bowl
│   │   ├── Replacing cowl panel cover
│   │   ├── Replacing door detent (lock striker), front left or right
│   │   ├── Replacing front left or right door trim panel
│   │   ├── Replacing front left or right rubber guide for left or right door window
│   │   ├── Replacing front lower left or right deformation element
│   │   ├── Replacing instrument panel trim
│   │   ├── Replacing light strip on door trim panel at front
│   │   ├── Replacing locks for single key locking system with CAS control unit
│   │   ├── Replacing mirror glass
│   │   ├── Replacing rear BMW badge
│   │   ├── Replacing rear bumper trim
│   │   ├── Replacing rear left or right side window
│   │   ├── Replacing right glovebox
│   │   ├── Replacing side cover on instrument panel
│   │   ├── Replacing soft top compartment lid gasket
│   │   ├── Replacing speaker trim on front left or right door trim panel
│   │   ├── Replacing storage compartment
│   │   ├── Replacing trim for front roofliner
│   │   ├── Replacing trim for storage compartment
│   │   ├── Replacing wheel arch trim on front left or right side panel (Japanese national-market version)
│   │   ├── Safety information for working on vehicles with airbag systems
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Sealing installation
│   │   ├── Service position of engine compartment lid
│   │   ├── Slightly loosen power window regulator to remove door lock in left or right front door
│   │   ├── Trim Parts, Covers, Handle Strip
│   │   ├── Underbody panelling
│   │   └── Window glass removal with wire pull handle
│   ├── 52 Seats and Motorcycle Seat
│   │   ├── 6.2.6 Other seats
│   │   ├── AM5205_00034 - Leather, optical complaint
│   │   ├── Cleaning and care of leather in vehicles All model series
│   │   ├── Electrically adjustable seats E81, E87, E90, E91, E92, E93
│   │   ├── Front seats
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Lumbar support inoperable E93
│   │   ├── Measures for leather complaints (seats)
│   │   ├── Microencapsulated screws
│   │   ├── Performing function check with adapter cable (for seat repairs)
│   │   ├── Rear seats (through-loading system)
│   │   ├── Removing and installing complete armrest (filler element) for rear seat backrest
│   │   ├── Removing and installing left or right front seat (normal electric)
│   │   ├── Removing and installing or replacing backrest frame
│   │   ├── Removing and installing or replacing carrier of outer cover on left or right front seat
│   │   ├── Removing and installing or replacing front left or right head restraint
│   │   ├── Removing and installing or replacing inner cover on left or right front seat
│   │   ├── Removing and installing or replacing left or right rear head restraint
│   │   ├── Removing and installing or replacing left or right side section on rear seat backrest
│   │   ├── Removing and installing or replacing locking unit at backrest (backrest frame release)
│   │   ├── Removing and installing or replacing lumbar cushion on front seat
│   │   ├── Removing and installing or replacing outer covers on left or right front seat
│   │   ├── Removing and installing or replacing rear panel on left or right front seat backrest
│   │   ├── Removing and installing or replacing trim cover for outer fitting on front seat
│   │   ├── Removing and installing or replacing trim cover for sash guide on left or right
│   │   ├── Removing and installing or replacing trim cover (headrest trim) on left or right front seat
│   │   ├── Removing and installing or replacing trim for release handle on front left or right seat
│   │   ├── Removing and installing or replacing valve housing for lumbar cushion
│   │   ├── Removing and installing replacing backrest frame on left or right front seat
│   │   ├── Removing and installing replacing backrest
│   │   ├── Removing and installing replacing front left or right crash-active headrest (from 09 2008)
│   │   ├── Removing and installing replacing left or right rear seat
│   │   ├── Removing installing ball sockets with clip
│   │   ├── Removing or installing thigh support on left or right front seat
│   │   ├── Replacing an air cushion for left or right backrest width adjustment
│   │   ├── Replacing backrest cover for left or right front seat
│   │   ├── Replacing backrest release cable for front left or right seat
│   │   ├── Replacing both gas cartridges for crash-active headrest
│   │   ├── Replacing cover for left or right front seat
│   │   ├── Replacing gas cartridge for crash-active headrest on left or right
│   │   ├── Replacing left backrest cover for rear seat
│   │   ├── Replacing left or right guide sleeves
│   │   ├── Replacing padding for left or right front seat backrest
│   │   ├── Replacing padding for left or right front seat
│   │   ├── Replacing padding for rear seat
│   │   ├── Replacing seatback release (LVK module) for left or right front seat
│   │   ├── Replacing seat cover for rear seat
│   │   └── Replacing sensor mat (OC3 mat) for passenger seat occupancy detector
│   ├── 54 Slide_Tilt Sunroof and Soft Top
│   │   ├── 0302240General repair instructions and troubleshooting on the hardtop
│   │   ├── 54 operating fluid overview
│   │   ├── Additional work for hall effect sensor in roof package
│   │   ├── Adjusting rear roof shell
│   │   ├── Align basic gauge
│   │   ├── Checking distinguishing features, sealing system new old
│   │   ├── Checking roof shell seal for leaks
│   │   ├── Convert centre roof shell lock package
│   │   ├── Convertible top assembly position
│   │   ├── Convertible top compartment lid
│   │   ├── Convertible top service positions
│   │   ├── Emergency closing hardtop
│   │   ├── Gauge consoles for roof module
│   │   ├── Gauge coupling lock (after removal and installation of roof module)
│   │   ├── Gauging base plate (cowl panel fastener)
│   │   ├── Gauging coupling lock (without removing refitting roof module)
│   │   ├── Gauging rear module
│   │   ├── Hardtop emergency opening
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Installing guide plate for cowl panel baseplate (build date up to 07 2007)
│   │   ├── Lowering inner headlining for roof shell, middle
│   │   ├── Microencapsulated screws
│   │   ├── Notes on the water drain hose of the slide tilt sunroof
│   │   ├── Power Convertible Top
│   │   ├── Procedure for folding hardtop after an accident
│   │   ├── Removing and installing or replacing trim cover on left or right rollbar
│   │   ├── Removing and installing replacing all roof shells
│   │   ├── Removing and installing replacing both base plates
│   │   ├── Removing and installing replacing centre roof shell trim strip on left and right
│   │   ├── Removing and installing replacing complete front roof shell lock package
│   │   ├── Removing and installing replacing cover for hinge, roof shell, middle left and right
│   │   ├── Removing and installing replacing cover from soft top compartment lid
│   │   ├── Removing and installing replacing fastener for roof shell in middle
│   │   ├── Removing and installing replacing front cowl panel fastener
│   │   ├── Removing and installing replacing gas pressure spring on left or right main bearing
│   │   ├── Removing and installing replacing holder for C-pillar flap
│   │   ├── Removing and installing replacing hydraulic cylinder coupling lock on left
│   │   ├── Removing and installing replacing hydraulic unit (drive) for retractable hardtop
│   │   ├── Removing and installing replacing left hydraulic cylinder from roof shell, middle
│   │   ├── Removing and installing replacing left main kinematics hydraulic cylinder
│   │   ├── Removing and installing replacing left or right hinge
│   │   ├── Removing and installing replacing left or right linkage outlet flap
│   │   ├── Removing and installing replacing left rear module hydraulic cylinder
│   │   ├── Removing and installing replacing lock package of middle roof shell
│   │   ├── Removing and installing replacing microswitch for baseplate
│   │   ├── Removing and installing replacing rear roof shell fastener
│   │   ├── Removing and installing replacing rear window
│   │   ├── Removing and installing replacing right coupling fastener hydraulic cylinder
│   │   ├── Removing and installing replacing right hydraulic cylinder from roof shell, middle
│   │   ├── Removing and installing replacing right main kinematics hydraulic cylinder
│   │   ├── Removing and installing replacing right rear module hydraulic cylinder
│   │   ├── Removing and installing replacing rollover protection system
│   │   ├── Removing and installing replacing roofliner for roof shell at front
│   │   ├── Removing and installing replacing roofliner for roof shell at rear
│   │   ├── Removing and installing replacing roof shell at front
│   │   ├── Removing and installing replacing roof shell at rear
│   │   ├── Removing and installing replacing roof shell in middle
│   │   ├── Removing and installing replacing trim for support tube in luggage compartment on left or right
│   │   ├── Removing and installing replacing trim strip on convertible top compartment lid
│   │   ├── Removing and installing roof module
│   │   ├── Removing and installing support block
│   │   ├── Removing butyl
│   │   ├── Removing installing ball sockets with clip
│   │   ├── Removing rear module
│   │   ├── Repair instructions for bonded seals
│   │   ├── Repair instructions for hydraulic system of soft top and soft top compartment lid
│   │   ├── Repair wind deflector fixing
│   │   ├── Replace the roof module
│   │   ├── Replacing butyl at front left or right roof shell seal
│   │   ├── Replacing butyl at seal, roof shell centre left or right
│   │   ├── Replacing front roof shell gasket
│   │   ├── Replacing rear roof shell seal
│   │   ├── Replacing soft top compartment lid gasket
│   │   ├── Replacing the hall effect sensor, rear module on the partition wall
│   │   ├── Replacing the middle roof shell headliner
│   │   ├── Replacing the middle roof shell seal
│   │   ├── Rollover Protection System, folding
│   │   ├── Topping up extracting fluid, checking fluid level
│   │   └── Triggering retracting rollover protection system (BMW diagnosis system)
│   ├── 61 General Vehicle Electrical System
│   │   ├── 4.11 Electrical wires
│   │   ├── 6120 Overview of tightening torques
│   │   ├── 6161 Overview of Technical Data
│   │   ├── 6161 Overview of tightening torques
│   │   ├── 61 operating fluid overview
│   │   ├── Adapter cable, 3-pin All series
│   │   ├── Adapter cable for OBD socket All series
│   │   ├── Adjusting left or right windscreen wiper
│   │   ├── AGM battery All models from E39
│   │   ├── Assessing the transport capability of high-voltage battery units in service workshops
│   │   ├── Automatic engine start-stop function
│   │   ├── Auxiliary cable
│   │   ├── Battery charging calendar
│   │   ├── Battery exchange in vehicles with a high-voltage system
│   │   ├── Battery master document
│   │   ├── Battery recharging intervals for booth vehicles, battery charging calendars and battery tags (12-V battery, high-voltage battery unit)
│   │   ├── Battery replacement information
│   │   ├── Battery with terminal
│   │   ├── Bus diagnosis
│   │   ├── Bus structures All models from E38 and MINI
│   │   ├── Butt connector for repairing a plug connection
│   │   ├── Car Access System E60, E61, E63, E64, E70, E81, E87, E90, E91, E92, E93
│   │   ├── Carrying out a voltage interruption of the 12-V battery
│   │   ├── Carrying out steering angle sensor adjustment
│   │   ├── Central locking system
│   │   ├── Charging battery
│   │   ├── Checking adjusting contact angle of windscreen wiper arms on windscreen
│   │   ├── Circular connector, 13-pin, system D2.5
│   │   ├── Circular connector, 20-pin, system D2.5
│   │   ├── Circular connector, 7-pin, 8-pin, system D2.5
│   │   ├── Circular plugs, 4-, 7-, 10- 12-, 25-pin, System D1.5 D2.5
│   │   ├── Cleaning contacts
│   │   ├── Comfort Access E60, E61, E63, E64, E70, E81, E87, E90, E91, E92, E93
│   │   ├── Connector housing, LCC contact (load current contact)
│   │   ├── Control unit plugs, 25-, 35-, 55-, 83-, 88-pin
│   │   ├── Crimping annular contacts
│   │   ├── Crimping Micro Power Quadlock contacts (MPQ)
│   │   ├── Crimping Micro Quadlock System contacts (MQS)
│   │   ├── Crimping optical fibres
│   │   ├── Crimping stop parts
│   │   ├── Cutting off, stripping insulation and cutting optical fibres to length
│   │   ├── Cutting to length and stripping insulation from cables
│   │   ├── Diagnosis for Condition Based Service
│   │   ├── Disconnecting and connecting battery earth lead
│   │   ├── Distribution box, current terminals
│   │   ├── Electrically adjustable seats E81, E87, E90, E91, E92, E93
│   │   ├── Electrically operated trailer tow hitch
│   │   ├── Encode program control unit(s) (after vehicle test)
│   │   ├── Encode program control unit(s)
│   │   ├── Fitting repair kit for positive battery lead transfer point
│   │   ├── Footwell module
│   │   ├── Form for equipotential bonding screw connections
│   │   ├── Fuse box
│   │   ├── Fuse holder
│   │   ├── Horn
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on intelligent battery sensor (IBS)
│   │   ├── Initializing rain light (solar) sensor
│   │   ├── Inline connectors, 15-pin, System D2.5
│   │   ├── In-line connectors, 24- 44-pin, Hybrid System MQS MPQ
│   │   ├── In-line connectors, 30-pin, Hybrid System MQS MPQ
│   │   ├── In-line connectors, 30-pin, System D2.5
│   │   ├── Inline connectors, 6-, 8-pin, System MQS
│   │   ├── In-line plugs, 20-pin, System D2.5
│   │   ├── In-line plugs, 2-pin, System JPT ELA
│   │   ├── In-line plugs, 2-pin, System MDK 3 plus 2.8
│   │   ├── Inline plugs, 2-pin, System MPQ 2.8
│   │   ├── Inline plugs, 3-, 6-pin, System Elo-Power 2.8
│   │   ├── Inline plugs, 4-, 10-pin, System Elo
│   │   ├── In-line plugs, 4-pin, System DFK ELA
│   │   ├── In-line plugs, 6- to 50-pin, System Elo
│   │   ├── Inline plugs, 8-, 12-pin, System D2.5
│   │   ├── Installing comb connector for retrofitting repairs
│   │   ├── Installing the repair cable for the positive battery cable of the power distribution box
│   │   ├── Install the repair cable for the positive battery cable VVT
│   │   ├── Instructions for 12 V dual storage system
│   │   ├── Instrument cluster E81, E87, E90, E91, E92, E93
│   │   ├── Junction box
│   │   ├── Main relay connector for DME
│   │   ├── Notes for disconnecting and connecting battery
│   │   ├── Notes for opening and closing cable straps
│   │   ├── Notes information on start assistance (jump starting)
│   │   ├── Notes on AGM battery
│   │   ├── Notes on ESD protection (Electro Static Discharge)
│   │   ├── Notes on handling optical fibres
│   │   ├── Notes on handling the high pressure cleaner
│   │   ├── Notes on handling wiring harnesses and cables
│   │   ├── Opening plug housings and removing contacts of different plug systems
│   │   ├── Overview of control units
│   │   ├── Overview of high-voltage battery unit cooling
│   │   ├── Overview of switches
│   │   ├── Overview of windscreen wiper and washer system
│   │   ├── Overview, rain sensor (additional work when replacing the windscreen sensor replacement)
│   │   ├── Park distance control
│   │   ├── Peripherals box, 26-pin all models
│   │   ├── Power supply E81, E82, E87, E88, E90, E91, E92, E93
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Recharge vehicle battery (at support in engine compartment)
│   │   ├── Relay carrier
│   │   ├── Release pressing-off tool
│   │   ├── Remove and install or replace battery
│   │   ├── Removing and installing or replacing fuse box in passenger compartment (built after 03 2007)
│   │   ├── Removing and installing or replacing Junction Box electronics
│   │   ├── Removing and installing or replacing roof switch centre
│   │   ├── Removing and installing replacing a spray nozzle in windscreen washer system
│   │   ├── Removing and installing replacing AV connection socket
│   │   ├── Removing and installing replacing bonnet hood contact switch
│   │   ├── Removing and installing replacing both shift paddles for automatic transmission
│   │   ├── Removing and installing replacing both switches on sport steering wheel
│   │   ├── Removing and installing replacing both windscreen wiper arms
│   │   ├── Removing and installing replacing bracket for windscreen wiper system complete with motor
│   │   ├── Removing and installing replacing bumper antenna for Comfort Access System
│   │   ├── Removing and installing replacing centre console control panel (with CCC ASK, CIC)
│   │   ├── Removing and installing replacing centre console control panel (without CCC ASK)
│   │   ├── Removing and installing replacing control unit for active front steering
│   │   ├── Removing and installing (replacing) control unit for Car Access System
│   │   ├── Removing and installing (replacing) control unit for comfort access system
│   │   ├── Removing and installing replacing control unit for trailer tow hitch unlocking
│   │   ├── Removing and installing replacing control unit module for left or right seat adjustment
│   │   ├── Removing and installing replacing convertible top module
│   │   ├── Removing and installing replacing DC DC converter
│   │   ├── Removing and installing replacing distribution box (on battery)
│   │   ├── Removing and installing replacing engine compartment B+ terminal
│   │   ├── Removing and installing replacing fibre-optic cable connector
│   │   ├── Removing and installing (replacing) fixture for steering column switch (SZL)
│   │   ├── Removing and installing replacing footwell module
│   │   ├── Removing and installing (replacing) front controller (until 09 2008)
│   │   ├── Removing and installing (replacing) hands-free charging electronics (High)
│   │   ├── Removing and installing replacing interior aerial antenna for Comfort Access System (front)
│   │   ├── Removing and installing replacing interior aerial antenna for Comfort Access System (rear)
│   │   ├── Removing and installing replacing left fanfare horn
│   │   ├── Removing and installing replacing left or right high-pressure nozzle of headli
│   │   ├── Removing and installing replacing light control unit
│   │   ├── Removing and installing replacing luggage compartment antenna for comfort access system
│   │   ├── Removing and installing replacing OBD-II socket
│   │   ├── Removing and installing (replacing) rain light sensor
│   │   ├── Removing and installing (replacing) RDC (Tyre Pressure Control) control unit
│   │   ├── Removing and installing replacing right fanfare horn
│   │   ├── Removing and installing (replacing) rollover controller
│   │   ├── Removing and installing replacing Start Stop switch
│   │   ├── Removing and installing replacing steering-column switch cluster
│   │   ├── Removing and installing replacing switch for backrest width adjustment
│   │   ├── Removing and installing replacing switch for convertible top operation
│   │   ├── Removing and installing replacing switch for hazard warning flashers central locking
│   │   ├── Removing and installing replacing switch for longitudinal seat adjustment
│   │   ├── Removing and installing replacing switch for lumbar support
│   │   ├── Removing and installing (replacing) switch for passenger airbag deactivation
│   │   ├── Removing and installing replacing switch for unlocking rear lid
│   │   ├── Removing and installing replacing tow hitch switch
│   │   ├── Removing and installing replacing USB audio interface connecting socket
│   │   ├── Removing and installing (replacing) USB hub
│   │   ├── Removing and installing replacing volute spring cassette
│   │   ├── Removing and installing replacing washer pump of headlight washer system
│   │   ├── Removing and installing replacing windscreen washer pump
│   │   ├── Removing and installing trailer module
│   │   ├── Repairing airbag cables
│   │   ├── Repairing airbag leads (build date version affected 04 2008 to 07 2008)
│   │   ├── Repairing ribbon cables
│   │   ├── Repairing steering column switch cluster (SZL)_
│   │   ├── Repairing wiring harness for blower controller
│   │   ├── Replace controller chrome ring
│   │   ├── Replacing battery positive lead (from battery to luggage compartment connector)
│   │   ├── Replacing battery positive lead (from luggage compartment connector to engine bulkhead connector)
│   │   ├── Replacing both windscreen wiper blades
│   │   ├── Replacing brake light switch
│   │   ├── Replacing button for controller (until 09 2008)
│   │   ├── Replacing coolant level switch
│   │   ├── Replacing fluid reservoir for windscreen washer system
│   │   ├── Replacing fogging sensor
│   │   ├── Replacing level switch for windscreen washer system
│   │   ├── Replacing microswitch on left or right front seat
│   │   ├── Replacing rocker switch for side window operation (front)
│   │   ├── Replacing switch combination for seat adjustment
│   │   ├── Replacing switch for door mirror
│   │   ├── Replacing the battery earth lead
│   │   ├── Replacing the trailer module (09 2006-03 2009)
│   │   ├── Replacing wiring harness for blower controller
│   │   ├── Replacing wiring harness in left or right front door
│   │   ├── Roof control panel E70, E81, E87, E90, E91, E92, E93
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety instructions for handling vehicle battery
│   │   ├── Socket housing 42-, 43-, 46-pin, Hybrid System MQS MPQ
│   │   ├── Socket housing (radio connector), Hybrid System MQS MPQ
│   │   ├── Socket housings, 2x21-, 2x27-pin, Hybrid Systems MQS MPQ, Elo Elo Power
│   │   ├── Socket housings, 5-pin, 8-pin, System MQS MPQ
│   │   ├── Socket of tab connector housings
│   │   ├── Special tools for wiring harness repairs
│   │   ├── Steering Column Switch E70, E71, E81, E82, E87, E90, E91, E92, E93
│   │   ├── Switch
│   │   ├── Threshold values for battery assessment of all batteries (except telephone batteries)
│   │   ├── Treating cables and fibre-optic cables
│   │   ├── Unlocking and disconnecting different plug connections
│   │   ├── Vehicle battery - closed-circuit current monitoring
│   │   ├── Version with AFS_ setting steering angle (after reconnecting vehicle battery)
│   │   ├── Windscreen Wipers E93
│   │   └── Windscreen wipers
│   ├── 62 Instruments
│   │   ├── Condition Based Service
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Instrument cluster E81, E87, E90, E91, E92, E93
│   │   ├── Instrument panel control unit
│   │   ├── Modifications to 342200235Condition Based Service342200235 maintenance system
│   │   ├── Removing and installing (replacing) instrument cluster
│   │   ├── Roller operation
│   │   └── Service menu in the instrument cluster
│   ├── 63 Lights
│   │   ├── 4.1.1 Headlamps status and function
│   │   ├── 4.1.2 Alignment
│   │   ├── 4.1.3 Headlamp switch
│   │   ├── 4.1.5 Self-levelling suspension devices (if required)
│   │   ├── 4.1.6 Headlight cleaning system (if required)
│   │   ├── 4.2.1 Rear lights status and function
│   │   ├── 4.3.2 Brake lights switch
│   │   ├── Adaptive Headlights
│   │   ├── Adjusting fog lamps
│   │   ├── Adjusting headlights
│   │   ├── Adjustment of lights E30, E32, E34, E36, E38, E39, E46, E52, E60, E61, E63, E64,
│   │   ├── AM6303_90577 - Headlight fogging
│   │   ├── Front Fog Lamps, Additional Lamps, BMW, E92, E93, Without M3
│   │   ├── Headlight fogging fault pattern
│   │   ├── Headlights, headlight assembly, BMW, E92, E93
│   │   ├── Headlights, headlight assembly, BMW, E93
│   │   ├── Headlights
│   │   ├── High-beam assistant
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Installing headlight repair kit
│   │   ├── Interior lighting, BMW, E93
│   │   ├── Light patterns from different low-beam headlight types
│   │   ├── Notes for handling bulbs bulb light sources (exterior lights)
│   │   ├── Notes for replacing light bulbs (interior lights)
│   │   ├── Notes for replacing the protective cap of the headlight
│   │   ├── Notes on headlight adjustment (overview of adjustment options of the lighting functions)
│   │   ├── Number plate light, BMW, E90, E92, E93
│   │   ├── Precautionary measures on vehicles with active pedestrian protection system
│   │   ├── Rear light cluster, BMW, E93
│   │   ├── Rear light unit
│   │   ├── Removing and installing or replacing left headlight (adaptive headlight)
│   │   ├── Removing and installing or replacing left headlight (xenon headlight)
│   │   ├── Removing and installing replacing auxiliary brake light
│   │   ├── Removing and installing replacing bulb holder in left (or right) rear light
│   │   ├── Removing and installing replacing footwell light (door)
│   │   ├── Removing and installing replacing footwell light (footwell)
│   │   ├── Removing and installing replacing footwell light (on storage compartment at rear)
│   │   ├── Removing and installing replacing front left or right auxiliary turn signal lamp
│   │   ├── Removing and installing replacing glovebox light
│   │   ├── Removing and installing replacing left front fog lamp
│   │   ├── Removing and installing replacing left or right number license plate light
│   │   ├── Removing and installing replacing left or right rear light (in side panel)
│   │   ├── Removing and installing replacing left or right tail light (on rear lid)
│   │   ├── Removing and installing replacing left vertical aim adjuster (xenon headlight)
│   │   ├── Removing and installing replacing luggage compartment light
│   │   ├── Removing and installing replacing luggage compartment light (rear lid)
│   │   ├── Removing and installing replacing mirror light
│   │   ├── Removing and installing replacing right front fog light
│   │   ├── Removing and installing replacing right headlight (adaptive headlight)
│   │   ├── Removing and installing replacing right headlight vertical aim adjuster
│   │   ├── Removing and installing right headlight (xenon headlight)
│   │   ├── Removing and refitting replacing left or right rear light as fitted from 03 2010 (on side panel)
│   │   ├── Repairing headlights
│   │   ├── Replace electronics box control unit for left adaptive headlight
│   │   ├── Replace left daytime driving lights control unit
│   │   ├── Replacing a socket housing for left or right rear light (on rear lid)
│   │   ├── Replacing a socket housing for left or right rear light (side panel)
│   │   ├── Replacing bulb for auxiliary direction indicator, front left or right
│   │   ├── Replacing bulb for front left (or right) side lights
│   │   ├── Replacing bulb for front left (or right) turning lights
│   │   ├── Replacing bulb for glovebox light
│   │   ├── Replacing bulb for left (or right) front turn indicator
│   │   ├── Replacing bulb for left or right number plate light
│   │   ├── Replacing bulb for left (or right) xenon headlight (with ignition unit)
│   │   ├── Replacing bulb(s) for ceiling light (roof switch centre)
│   │   ├── Replacing bulb(s) for mirror light
│   │   ├── Replacing control unit for left xenon headlight
│   │   ├── Replacing control unit for right xenon headlight
│   │   ├── Replacing electronics box control unit for right adaptive headlight
│   │   ├── Replacing halogen bulb for left or right front fog lamp
│   │   ├── Replacing ignition unit for left xenon headlight (with xenon bulb)
│   │   ├── Replacing LED for front door trim panel light
│   │   ├── Replacing LED for side trim panel light
│   │   ├── Replacing left daytime light LED modules
│   │   ├── Replacing left turn indicator (LED) control unit
│   │   ├── Replacing left turn indicator (LED)
│   │   ├── Replacing light bulb for footwell light
│   │   ├── Replacing light bulb for luggage compartment lighting
│   │   ├── Replacing light bulb for luggage compartment light (on rear lid)
│   │   ├── Replacing light bulb(s) for left or right rear light
│   │   ├── Replacing sealing frame for left or right rear light (on rear lid)
│   │   ├── Replacing sealing frame for left or right rear light (on side panel)
│   │   ├── Replacing the ignition unit for the right xenon headlight (with xenon bulb)
│   │   ├── Roof control panel E70, E81, E87, E90, E91, E92, E93
│   │   ├── Safety information for handling bulbs light sources (exterior lights)
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Settings for lights, BMW, E30, E32, E34, E36, E38, E39, E46, E52, E60, E61, E63, E64, E65, E66, E67, E81, E82, E83, E85, E86, E87, E88, E90, E91, E92, E93, With headlight range control
│   │   ├── Stop brake lights
│   │   ├── Test requirements for headlights vertical aim adjustment
│   │   ├── Turn indicators, BMW, E93, Without M3
│   │   ├── US version_ Check position the horizontal blocking when headlight is replaced
│   │   ├── US version_ Remove the horizontal blocking before adjusting the headlamp
│   │   ├── US version_ Setting the horizontal blocking when headlamp is set
│   │   └── Windscreen Wipers E93
│   ├── 64 Heating and Air Conditioning
│   │   ├── 6411 Overview of tightening torques
│   │   ├── 64 operating fluid overview
│   │   ├── A C performance test
│   │   ├── Air conditioning compressor
│   │   ├── air conditioning, refrigerant amounts, BMW, E90, E91, E92, E93
│   │   ├── AM6401_00313 - Heating and air conditioning system noise
│   │   ├── AM6402_00591 - Air conditioning malfunction
│   │   ├── Cleaning evaporator
│   │   ├── Drawing off, evacuating and filling air conditioning (R134a)
│   │   ├── Draw off the contaminated R1234yf refrigerant and dispose of it
│   │   ├── Heating and air conditioning system oil quantity, BMW, E90, E91, E92, E93, M57T2, N47, N51, N53, S65
│   │   ├── Heating and air-conditioning unit (evaporator), switching elements
│   │   ├── Heating and air-conditioning unit (expansion valve), switching elements
│   │   ├── Housing, heater air conditioner
│   │   ├── IHKA control panel_ LED in A C button flashes All models with integrated automatic heating and air conditioning (option 534)
│   │   ├── Important information about vehicle climate control E8x E9x E6x
│   │   ├── Independent heater
│   │   ├── Independent heating E70, E90, E91, E92, E93
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Information on using cleaning agent paints (personal protection equipment)
│   │   ├── Initialising Telestart hand-held transmitter (T93) (from version 03 2007 onward)
│   │   ├── Initializing Telestart hand transmitter (T90) (up to build date 03 2007)
│   │   ├── Install the retrofit absorber for the air conditioning suction line
│   │   ├── Instructions for desiccant insert replacement
│   │   ├── Instructions for handling R 134a refrigerant
│   │   ├── Instructions for handling refrigerant oil (for refrigerant R 134a)
│   │   ├── Instructions for opening and part replacement in refrigerant circuit
│   │   ├── Instructions for replacement of air conditioning capacitors and radiator coolers
│   │   ├── Integrated heating control and climate control
│   │   ├── Leak detection with forming gas
│   │   ├── Leak detection with ultraviolet additives (UV additives) (BMW leak-testing case)
│   │   ├── Leak-testing condenser
│   │   ├── Leak-testing evaporator
│   │   ├── Main group 64
│   │   ├── Musty odour from heating and air conditioning system, evaporator cleaning
│   │   ├── Notes for changing the air conditioning compressor, determining the amount of refrigerant oil (amount of refrigerant oil of new air conditioning compressor known)
│   │   ├── Notes on changing the air conditioning compressor, determining the amount of refrigerant oil (amount of refrigerant oil of new air conditioning compressor not known)
│   │   ├── Overview of A C circuit components
│   │   ├── Overview of A C service station
│   │   ├── Overview of actuator drives on heater air conditioner
│   │   ├── Overview of refrigerant oil to be filled
│   │   ├── Refrigerant Lines and Expansion Valve
│   │   ├── Removing air ducts
│   │   ├── Removing and installing or replacing complete independent heater with bracket
│   │   ├── Removing and installing or replacing expansion valve
│   │   ├── Removing and installing or replacing fuel pump
│   │   ├── Removing and installing or replacing muffler silencer
│   │   ├── Removing and installing renewing evaporator
│   │   ├── Removing and installing renewing heating unit
│   │   ├── Removing and installing replacing actuator drive for blending flap (left)
│   │   ├── Removing and installing replacing capacitor (with desiccant insert) for heating and air conditioning system
│   │   ├── Removing and installing replacing center fresh-air grill
│   │   ├── Removing and installing replacing footwell temperature sensor
│   │   ├── Removing and installing replacing heater air conditioner fan
│   │   ├── Removing and installing replacing heater air conditioner operator unit (version
│   │   ├── Removing and installing replacing heating - A C system control panel (version with CCC ASK and CIC)
│   │   ├── Removing and installing replacing intake silencer for independent auxiliary heater
│   │   ├── Removing and installing replacing left fresh-air grill
│   │   ├── Removing and installing replacing microfilter housing (lower section)
│   │   ├── Removing and installing replacing microfilter housing (upper section)
│   │   ├── Removing and installing replacing rear compartment fresh-air grille
│   │   ├── Removing and installing replacing right fresh-air grill
│   │   ├── Removing and installing replacing sensor for automatic recirculated air control
│   │   ├── Removing and installing replacing servodrive for blending flap (left)
│   │   ├── Removing and installing replacing servodrive for blending flap (right)
│   │   ├── Removing and installing replacing servodrive for central kinematics (A C control)
│   │   ├── Removing and installing replacing servodrive for defrosting flap (right)
│   │   ├── Removing and installing replacing servodrive for fresh- recirculated-air flap
│   │   ├── Removing and installing replacing solar sensor
│   │   ├── Removing and installing replacing ventilation temperature sensor
│   │   ├── Removing and installing the microfilter housing (lower section) PREMIUM
│   │   ├── Removing and installing the microfilter housing (upper section) PREMIUM
│   │   ├── Replace heat exchanger
│   │   ├── Replacing A C system compressor (N51)
│   │   ├── Replacing actuator drive of ventilation flaps
│   │   ├── Replacing controller for air conditioning blower
│   │   ├── Replacing desiccant insert for air conditioning system
│   │   ├── Replacing evaporator temperature sensor
│   │   ├── Replacing fogging sensor
│   │   ├── Replacing microfilter for interior ventilation
│   │   ├── Replacing safety pressure switch
│   │   ├── Replacing servodrive for blending flap
│   │   ├── Replacing servodrive for footwell flap (automatic A C)
│   │   ├── Replacing servodrive for rear compartment flap
│   │   ├── Replacing the button caps of the heating and air conditioning system control panel
│   │   ├── Replacing valve insert for refrigerant line
│   │   ├── Replacing water valve for heater
│   │   ├── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   │   ├── Safety informations for handling refrigerant oil
│   │   └── Safety informations for handling tetrafluorethane refrigerant R134a
│   ├── 65 Audio, Navigation, Information Systems
│   │   ├── 6513 Overview of tightening torques
│   │   ├── Aerial system E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, R55, R56
│   │   ├── Airbag triggering control
│   │   ├── CD changer_ Malfunction
│   │   ├── CD DVD drives and special devices
│   │   ├── Crash safety (ACSM) E60, E61, E63, E64, E70, E85, E93
│   │   ├── Deactivating and reactivating airbags acoustic seat belt reminder
│   │   ├── Digital and analogue television E60, E61, E63, E64, E65, E66, E70, E71, E83, E85, E86, E90, E91, E92, E93
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Master document for airbag belt tensioner
│   │   ├── New audio test CD for complaints about sound system playback All series
│   │   ├── Notes on handling wiring harnesses and cables
│   │   ├── Notes on scrapping BMW vehicles with gas generators (central airbag control unit, airbag system)
│   │   ├── Overview of airbag modules, airbag control unit, belt tensioners
│   │   ├── Overview of sensors for airbag system
│   │   ├── Problems with audio navigation CDs DVDs All series
│   │   ├── Radio E87, E90, E91, E92, R56
│   │   ├── Removing and installing or replacing aerial amplifier
│   │   ├── Removing and installing renewing right front door sensor
│   │   ├── Removing and installing replacing aerial of Global Positioning System (GPS)
│   │   ├── Removing and installing replacing airbag control unit
│   │   ├── Removing and installing replacing amplifier (HiFi system)
│   │   ├── Removing and installing replacing amplifier (HiFi system, with CD changer)
│   │   ├── Removing and installing (replacing) amplifier (Top HiFi system)
│   │   ├── Removing and installing replacing amplifier (Top HiFi system, with CD changer)
│   │   ├── Removing and installing (replacing) audio system controller
│   │   ├── Removing and installing replacing back-up aerial antenna
│   │   ├── Removing and installing replacing blocking circuit (left or right)
│   │   ├── Removing and installing replacing bumper antenna for Comfort Access System
│   │   ├── Removing and installing replacing bumper antenna
│   │   ├── Removing and installing replacing Car Communication Computer
│   │   ├── Removing and installing (replacing) Car Information Computer (CIC)
│   │   ├── Removing and installing replacing CD changer
│   │   ├── Removing and installing replacing CD drive for Car Communication Computer
│   │   ├── Removing and installing replacing DAB tuner
│   │   ├── Removing and installing replacing DVD drive for Car Communication Computer
│   │   ├── Removing and installing replacing emergency power siren with tilt sensor
│   │   ├── Removing and installing replacing fan for Car Communication Computer
│   │   ├── Removing and installing replacing front left or right acceleration sensor
│   │   ├── Removing and installing replacing front trim for Car Communication Computer
│   │   ├── Removing and installing replacing gyro sensor drive for Car Communication Computer
│   │   ├── Removing and installing replacing interior aerial antenna for Comfort Access System (front)
│   │   ├── Removing and installing replacing interior aerial antenna for Comfort Access System (rear)
│   │   ├── Removing and installing replacing interior movement detection module in left or
│   │   ├── Removing and installing replacing left antenna (AM FM)
│   │   ├── Removing and installing replacing left antenna amplifier
│   │   ├── Removing and installing (replacing) left B-pillar sensor
│   │   ├── Removing and installing (replacing) left front door sensor
│   │   ├── Removing and installing replacing left or right central bass speaker (under front seat)
│   │   ├── Removing and installing replacing left or right frequency gate
│   │   ├── Removing and installing replacing luggage compartment antenna for comfort access system
│   │   ├── Removing and installing (replacing) on-board monitor
│   │   ├── Removing and installing replacing outside temperature sensor
│   │   ├── Removing and installing replacing radio receiver
│   │   ├── Removing and installing replacing rear telephone antenna
│   │   ├── Removing and installing replacing rear window antenna amplifier
│   │   ├── Removing and installing replacing right antenna (AM FM)
│   │   ├── Removing and installing replacing right antenna amplifier
│   │   ├── Removing and installing replacing right B-pillar sensor
│   │   ├── Removing and installing (replacing) rollover controller
│   │   ├── Removing and installing replacing satellite radio (US version only until 09 2009)
│   │   ├── Removing and installing replacing satellite tuner (US version only)
│   │   ├── Removing and installing replacing speaker (mid-range speaker in door trim panel
│   │   ├── Removing and installing replacing speaker (mid-range speaker, in instrument panel)
│   │   ├── Removing and installing replacing speaker (mid-range speaker, rear side trim panel)
│   │   ├── Removing and installing replacing speaker (tweeter in quarterlight mirror)
│   │   ├── Removing and installing replacing speaker (tweeter in rear side trim panel)
│   │   ├── Removing and installing replacing telephone antenna
│   │   ├── Removing and installing replacing TV aerial
│   │   ├── Removing and installing (replacing) video module for on-board monitor
│   │   ├── Repair instructions after theft of head unit
│   │   ├── Replacing HIP module for Car Communication Computer
│   │   ├── Replacing sensor mat for front passenger seat occupancy detector
│   │   ├── Replacing sensor mat for front passenger seat occupancy detector (sport seat)
│   │   ├── Replacing sensor mat (OC3 mat) for passenger seat occupancy detector
│   │   └── Speakers
│   ├── 66 Distance System, Cruise Control, Remote Operation
│   │   ├── Adjusting ACC sensor
│   │   ├── Comfort Access E60, E61, E63, E64, E70, E81, E87, E90, E91, E92, E93
│   │   ├── Cruise control E90, E91, E92, E93
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Notes on radio-operated system (vehicle access, radio-operated opening, radio-operated closing)
│   │   ├── Park distance control
│   │   ├── Removing and installing (replacing) ACC sensor
│   │   ├── Removing and installing replacing a front (inner) ultrasonic sensor (Park Distance Control)
│   │   ├── Removing and installing replacing a front ultrasonic sensor (outer) (Park Distance Control)
│   │   ├── Removing and installing replacing a rear (centre) ultrasonic sensor (Park Distance Control)
│   │   ├── Removing and installing replacing a rear (left right) ultrasonic transducer (Park Distance Control)
│   │   ├── Removing and installing (replacing) control unit (Park Distance Control)
│   │   ├── Removing and installing replacing front signal sensor (Park Distance Control)
│   │   ├── Removing and installing replacing longitudinal dynamics module
│   │   ├── Removing and installing replacing rear signal sensor (Park Distance Control)
│   │   ├── Removing and installing replacing slide-in unit for radio-operated key
│   │   ├── Replacing screws on ACC302240sensor unit
│   │   └── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   ├── 67 Electric Motor
│   │   ├── Drives, power windows
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Notes on initializing power window unit in front door
│   │   ├── Overview of drive units for seat adjustment
│   │   ├── Removing and installing or replacing flat motor for front left or right power window regulator
│   │   ├── Removing and installing replacing actuator drive for glove box locking mechanism
│   │   ├── Removing and installing replacing drive for head restraint height adjustment on left or right front seat
│   │   ├── Removing and installing replacing drive unit for backrest angle adjustment
│   │   ├── Removing and installing replacing drive unit for seat height adjustment
│   │   ├── Removing and installing replacing drive unit for seat tilt adjustment
│   │   ├── Removing and installing replacing flat motor for rear left or right power window unit
│   │   ├── Removing and installing replacing forward back seat adjustment drive unit
│   │   ├── Removing and installing replacing left vertical aim adjuster (xenon headlight)
│   │   ├── Removing and installing replacing lumbar support drive mechanism on front seat,
│   │   ├── Removing and installing replacing right headlight vertical aim adjuster
│   │   ├── Removing and installing replacing servodrive for front left or right door locking mechanism
│   │   ├── Removing and installing replacing servodrive for tank filler flap
│   │   ├── Removing and installing replacing servodrive in storage compartment
│   │   ├── Replacing actuator drive for rear lid locking
│   │   ├── Replacing drive unit for electrically operated left or right door mirror
│   │   ├── Replacing mirror electronics for electrically operated left or right door mirror
│   │   ├── Replacing wiper motor
│   │   └── Safety information for working on vehicles with automatic engine start-stop function (MSA)
│   ├── 71 Parts and Accessories for Engine and Chassis
│   │   ├── Drawbar load sign omitted All with options 235 and 3AC
│   │   ├── Electrically operated trailer tow hitch
│   │   ├── Independent heater
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Notes on retrofitting a trailer towing device
│   │   ├── Removal with gear unit blocked
│   │   ├── Removing and installing replacing control unit for trailer tow hitch unlocking
│   │   ├── Replacing complete trailer tow hitch
│   │   ├── Replacing release unit for trailer tow hitch
│   │   └── Trailer tow hitch
│   ├── 72 Bod Parts and Accessories
│   │   ├── 7212 Overview of tightening torques
│   │   ├── 8.1.1 Acoustic insulation system
│   │   ├── Active pedestrian protection procedure following an accident
│   │   ├── Airbag modules
│   │   ├── Check actuator
│   │   ├── Checking automatic seat belt
│   │   ├── Check list for automatic seat belt
│   │   ├── Checklist for front seat with seat-integrated seat belt system (SGS)
│   │   ├── Deactivating and reactivating airbags acoustic seat belt reminder
│   │   ├── Deactivating front passenger airbags with key switch
│   │   ├── Drawbar load sign omitted All with options 235 and 3AC
│   │   ├── Fix bolts on the new part
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Location of checkpoints for front seat with seat-integrated belt system (SGS)
│   │   ├── Master document for airbag belt tensioner
│   │   ├── Microencapsulated screws
│   │   ├── Notes on scrapping vehicles with gas generators (airbag system)
│   │   ├── Overview of airbag modules, airbag control unit, belt tensioners
│   │   ├── Overview of the clips and unlocking tools for head airbag fastening
│   │   ├── Procedure after airbag deployment as result of an accident
│   │   ├── Removing and installing or replacing airbag module on passenger side
│   │   ├── Removing and installing or replacing front left or right lower belt fitting (seat belt pretensioner)
│   │   ├── Removing and installing or replacing rear left or right lower belt fitting
│   │   ├── Removing and installing or replacing rear left or right seat belts
│   │   ├── Removing and installing or replacing side airbag, front left or right seat
│   │   ├── Removing and installing replacing front seat belt (US version only)
│   │   ├── Removing and installing replacing knee airbag module for driver protection
│   │   ├── Removing and installing replacing knee airbag module for front passenger protection
│   │   ├── Repairing airbag cables
│   │   ├── Replacing blind rivets
│   │   ├── Replacing both gas cartridges for crash-active headrest
│   │   ├── Replacing gas cartridge for crash-active headrest on left or right
│   │   ├── Replacing release unit for trailer tow hitch
│   │   ├── Replacing the seat belt clip
│   │   ├── Safety precautions and general information
│   │   ├── Safety regulations for handling components with gas generators
│   │   ├── Seat Belts
│   │   └── Unlocking locking airbag plug connections
│   ├── 84 Communication System
│   │   ├── Car Communication Computer E60, E61, E63, E64, E70, E87, E90, E91, E92, E93, R56
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   ├── Master document for airbag belt tensioner
│   │   ├── Multi-audio system controller E60, E61, E63, E64, E70, E87, E90, E91, E92, E93
│   │   ├── Notes on handling wiring harnesses and cables
│   │   ├── Radio E87, E90, E91, E92, R56
│   │   ├── Removing and installing or replacing Bluetooth aerial
│   │   ├── Removing and installing or replacing eject box
│   │   ├── Removing and installing (replacing) hands-free charging electronics (High)
│   │   ├── Removing and installing replacing hands-free charging electronics
│   │   ├── Removing and installing replacing hands-free microphone on steering column
│   │   ├── Removing and installing replacing hands-free system speaker
│   │   ├── Removing and installing (replacing) Telematic Control Unit (TCU) (SA633 SA638 SA639 SA664)
│   │   ├── Removing and installing (replacing) USB hub
│   │   ├── Universal charger and hands-free system E60, E61, E63, E64, E81, E87, E90, E91, E92, E93
│   │   └── US car phone E60, E61, E63, E64, E70, E90, E91, E92, E93
│   ├── 97 Vehicle Preservation
│   │   ├── Group 97
│   │   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   │   └── Information on using cleaning agent paints (personal protection equipment)
│   └── 99 Paint
│   ├── 99 operating fluid overview
│   ├── Cosmetic repairs on aluminium rims
│   ├── General instructions on paintwork
│   ├── Individual parts painting
│   ├── Information for handling the documents_ repair instructions, technical data, AZD
│   ├── Information on using cleaning agent paints (personal protection equipment)
│   ├── Information warning labels
│   ├── Interior painting
│   ├── Miscellaneous painting
│   ├── New BMW paint brochure
│   ├── Notes on handling the high pressure cleaner
│   ├── Notes on using temperature-controlled infra-red radiators
│   ├── Sectional painting
│   └── Touching up paintwork damage
└── Wiring & Troubleshooting
├── Body
│   ├── Adaptive headlight
│   ├── Adaptive Headlights
│   ├── Adjusting the compass display
│   ├── Aerial diagnosis
│   ├── AHL Adaptive Headlights
│   ├── AHM_70 - description of short circuit behaviour
│   ├── AHM Alive signal
│   ├── AHV-Taste_E9X
│   ├── Airbag sensors
│   ├── Airbag supply
│   ├── Airbag triggering circuits
│   ├── Alternator
│   ├── AM5102_00010 - Exterior mirror malfunction
│   ├── AM5102_00035 - Door lock malfunction
│   ├── Antitheft Alarm System (DWA)
│   ├── Audio output
│   ├── Automatic driving lights control. Activation and deactivation characteristics implausible
│   ├── AUX-IN connection
│   ├── B4162_HKLMECH1- Rear area malfunction - Malfunction at the tailgate
│   ├── Backrest width adjustment, driver's side
│   ├── Backrest width adjustment, passenger's side
│   ├── Blower and blower motor Mounting
│   ├── BMW Professional telematics
│   ├── Bowers & Wilkins Diamond Surround Sound system
│   ├── Brake lights
│   ├── Brake light switch
│   ├── BSD alternator
│   ├── Bulb holder_ Attachment of a sponge-rubber strip
│   ├── Bus systems
│   ├── Calibrating compass in inside mirror (up to 09 08)
│   ├── Cap of mechanical movement range
│   ├── Car Communication Computer CCC
│   ├── Car Information Computer CIC
│   ├── Car Information Computer
│   ├── CBX-MEDIA_ Customer-initiated software update (KISA)
│   ├── CCC connected devices
│   ├── CCC drives_ CD, DVD, MD
│   ├── CCC navigation
│   ├── CCC tips and tricks
│   ├── CD changer audio video (CDC DVDC)
│   ├── CD changer supply
│   ├── CD DVD changer_ Quality check
│   ├── Central information display (CID)
│   ├── Central locking drives
│   ├── Central locking inputs
│   ├── Central locking system
│   ├── Centre console control panel
│   ├── Check Control message Remote key not in vehicle
│   ├── Cigarette lighter and charging sockets
│   ├── Closed-circuit current cutoff relay_ Bi-stable relay (depending on variant)
│   ├── Closed-circuit current measurement
│   ├── Combox multimedia and Combox emergency call
│   ├── Combox
│   ├── Comfort Access, sub-bus (K-TAGE)
│   ├── Comfort Access System
│   ├── Compatibility check for USB devices
│   ├── CON controller voltage supply
│   ├── Connector, dimmed instrument lighting
│   ├── Controller supply
│   ├── Convenient access system inputs
│   ├── Crash-active head restraint
│   ├── Crash safety module
│   ├── Current curve E9x electrically extendable towing hitch at 12V
│   ├── Dealing with short circuits in the footwell module, FRM, 2nd generation
│   ├── Dealing with short circuits in the footwell module FRM
│   ├── Description of bus diagnosis
│   ├── Digital tuner
│   ├── Distributed function of the power window regulators
│   ├── Driver's lumbar support
│   ├── Driver's seat adjustment
│   ├── Driver's seat heating
│   ├── Dynamic Stability Control Mk60 and Mk60E5
│   ├── Electric outside mirror
│   ├── Electric steering lock
│   ├── Electrochromic mirror
│   ├── EMC measures E61 and E91
│   ├── EMC measures E81, E87 and R56
│   ├── Energy diagnosis
│   ├── Energy diagnosis_ Terminal control
│   ├── Energy diagnosis_ Unfavourable customer behaviour
│   ├── Exterior lighting
│   ├── Fan motor_ Evaluate the water damage to the fan motor
│   ├── Fan motor_ Water damage
│   ├── Fault patterns for Central Information Display
│   ├── Fault symptom overview CBX-MEDIA + CBX-ECALL
│   ├── Fault symptom overview ULF-SBX-HMOST
│   ├── Field strength evaluation
│   ├── FLA high beam assistant
│   ├── Folding Central Information Display (CID)
│   ├── FRM Footwell module
│   ├── Front fog lights and rear fog lights
│   ├── Functional description Bluetooth test IMIBR2
│   ├── Functional description, integrated USB test
│   ├── Functional description of integrated Bluetooth check
│   ├── Functional description of the digital tuner US
│   ├── Functional description of USB test IMIBR2
│   ├── FZD Roof functions centre
│   ├── General diagnosis instructions for checking the telecommunication system
│   ├── General diagnosis instructions to customer-initiated software update
│   ├── General information on the diagnosis of sound output and audio amplifier
│   ├── Geometrical characteristics of CDs and DVDs
│   ├── GSM code for querying credits on SIM cards
│   ├── Heating and air conditioning functions
│   ├── Help in analysing noticeable symptoms with regard to the parking aid
│   ├── Help instruction for ConnectedDrive
│   ├── Horn
│   ├── Ignition circuit, safety system (airbag)
│   ├── Independent heating
│   ├── Inertia reel with child seat function
│   ├── Information on carrying out the diagnosis
│   ├── Initialise power windows
│   ├── Inputs, retractable hardtop
│   ├── Installation position, seat occupancy electronics
│   ├── Instrument cluster system test
│   ├── Intelligent battery sensor and battery
│   ├── Intelligent battery sensor (IBS)
│   ├── Interior lights
│   ├── Interior mirror with digital compass
│   ├── Leak in the refrigerant circuit, air conditioning with electric A C compressor
│   ├── Leak in the refrigerant circuit, air conditioning with mechanical air conditioning compressor
│   ├── Location determination
│   ├── Loss of voice control
│   ├── Low beam high beam
│   ├── M-ASK multi-audio system controller
│   ├── Multifunction steering wheel
│   ├── Navigation Japan
│   ├── Navigation Professional with Real Time Traffic Information (RTTI)
│   ├── Navigation system Japan with hard drive
│   ├── Note on functional description
│   ├── Notes for checking interference noise from the speakers
│   ├── Notes regarding possible manipulation of the odometer
│   ├── Notice regarding [!] Current fault patterns
│   ├── OBD II socket
│   ├── On-board computer function
│   ├── Operation of the Telestart transmitter
│   ├── Oscilloscope measurement on system locks
│   ├── Passenger airbag deactivation
│   ├── Passenger's airbag deactivation
│   ├── Passenger's lumbar support
│   ├── Pedestrian protection
│   ├── Perform troubleshooting in the case of overvoltage
│   ├── Positions of the hardtop
│   ├── Power management_ Reduction or shutdown of individual electrical consumer
│   ├── Power supply, CA convenient access system
│   ├── Power supply, car access system CAS
│   ├── Power supply, Car Information Computer CIC
│   ├── Power supply CCC M-ASK
│   ├── Power supply, convertible top module (CTM)
│   ├── Power supply, driver's seat module SMFA
│   ├── Power supply, dynamic stability control DSC
│   ├── Power supply, footwell module FRM
│   ├── Power supply, function control centre, roof FZD
│   ├── Power supply, instrument cluster KOMBI
│   ├── Power supply JBE junction box, electronics
│   ├── Power supply, passenger's seat module SMBF
│   ├── Power window inputs
│   ├── Power window outputs
│   ├── Protective functions for the power windows
│   ├── RAD2 Fault patterns
│   ├── RAD2 Service mode
│   ├── Radio reception
│   ├── Rain driving light sensor_ restrictions due to technical features
│   ├── Rain rain light sensor
│   ├── Real Time Traffic Information splitter
│   ├── Rear window defogger
│   ├── Reference to functional description (auxiliary heating)
│   ├── Reference to functional description (PDC)
│   ├── Reference to functional description (radio)
│   ├── Reference to functional description (voltage supply)
│   ├── Remote control
│   ├── Remote key
│   ├── Retractable hardtop
│   ├── Reversing lights
│   ├── Rollover protection
│   ├── Roll-over protection system
│   ├── Satellite receiver
│   ├── Satellite tuner
│   ├── Schematic circuit diagram, bus diagnosis
│   ├── Seat belts
│   ├── Seat occupancy recognition
│   ├── Seat occupation detection (OC3)
│   ├── Seats
│   ├── Set oscilloscope display alternator
│   ├── Setting the garage-door opener
│   ├── Shut-down, closed-circuit current infringement
│   ├── Shut-off standby current violation
│   ├── Side light, parking light
│   ├── Signals on the AHV connector (E9x)
│   ├── Supply, heating and air conditioning control unit
│   ├── Supply, HiFi amplifier
│   ├── Supply, park distance control unit
│   ├── Supply, steering column switch cluster SZL
│   ├── Towing hitch release
│   ├── Trailer lighting
│   ├── Trailer module and trailer coupling release
│   ├── Trailer module_ Currently known fault patterns
│   ├── Turn signal indicator
│   ├── ULF-SBX-H interface box High
│   ├── Vendor ID and product ID
│   ├── Video connection for smartphone
│   ├── Video diagnosis
│   ├── Voltage supply for CID, Central Information Display
│   ├── Voltage supply, junction box electronics (JBE)
│   ├── Warning and indicator lights
│   ├── Wash and wipe system and headlight cleaning system
│   ├── Wipe-wash control
│   └── Wiring defect, centre console control panel (SZM)
├── Chassis and Suspension
│   ├── Active cruise control (ACC)
│   ├── Active cruise control
│   ├── Active steering
│   ├── Cruise control with braking function (LDM)
│   ├── Dynamic stability control (DSC)
│   ├── Dynamic Stability Control Mk60 and Mk60E5
│   ├── Electric steering lock
│   ├── Electromechanical power steering
│   ├── Information on carrying out the diagnosis
│   ├── Note on functional description (AFS)
│   ├── Notice regarding [!] Current fault patterns
│   ├── Power supply, car access system CAS
│   ├── Power supply, dynamic stability control DSC
│   ├── Power supply, longitudinal dynamics management LDM
│   ├── Reference to functional description (AFS)
│   ├── Sensor system
│   ├── Servotronic
│   ├── Steering angle sensor
│   ├── Supply, active steering
│   ├── Supply, control unit for tyre pressure control system
│   ├── Supply, steering column switch cluster SZL
│   ├── Switch functions DSC
│   ├── Troubleshooting Manual for interface faults
│   ├── Tyre pressure control (RDC)
│   ├── Tyre Pressure Monitor
│   └── Tyre Pressure Monitor (RDC)
├── Components Connectors
│   ├── A0473,X4229
│   ├── A112a Navigation system
│   ├── A112a, X10635, X1312, X14243, X14321, X4293
│   ├── A113, X10218
│   ├── A117a, A117b, A167a, X10387, X13655
│   ├── A11a,A169,S8,X10164
│   ├── A11a, X608
│   ├── A121b Interior movement detector
│   ├── A12a, X10179, X18069
│   ├── A12, X10179, X1441, X18069
│   ├── A13663 Fuel pump control (EKPS)
│   ├── A14112, X18846
│   ├── A14147,X14147
│   ├── A14282 Longitudinal dynamics management
│   ├── A14282, X14282
│   ├── A144a Active cruise control
│   ├── A144a, X1783
│   ├── A149a Car access system
│   ├── A14
│   ├── A165a Central information display
│   ├── A165a, X13822, X13823
│   ├── A16761a
│   ├── A167a Controller
│   ├── A173, X10473
│   ├── A174, X10688
│   ├── A186, X013617, X013709, X0732, X0733
│   ├── A186, X013995, X013996, X013997, X013999, X022008
│   ├── A187 Seat module, front left
│   ├── A187, X010999, X018844
│   ├── A187, X10999, X13617, X13989, X13995, X13997, X13999, X18844, X732, X733
│   ├── A187, X10999, X18844
│   ├── A187, X13617, X13709, X732, X733
│   ├── A18807, E840, X18262, X18807
│   ├── A18, X10266
│   ├── A18, X10633, X18773
│   ├── A195, A6, X609, X992
│   ├── A195 Towing hitch release
│   ├── A197 Video module
│   ├── A197, X10642, X13918, X13919, X18803, X18804
│   ├── A2076, X18326, X64101, X64102
│   ├── A215,X13354
│   ├── A22, X14284, X14292, X19594
│   ├── A23b, X10725, H55, X403, H59a, X257
│   ├── A267a, E840, X14118, X17181, X18262
│   ├── A2a, X11175
│   ├── A4010a Junction box, electronics
│   ├── A4010a, X14271, X14272
│   ├── A4010, X11009, X11011
│   ├── A4011 Footwell module
│   ├── A4011, X1218, X14259, X14260, X14261
│   ├── A4011, X14259, X14260, X14261, X3255, X3257, X8670, X8671
│   ├── A421, X01240
│   ├── A421, X10841, X10842, X13344, X13389, X16702
│   ├── A424, X13912, N48
│   ├── A456, X16026
│   ├── A460, B100, X10675, X13463
│   ├── A46, F101, F102, F103, F104, F105, F106, F107, F108, X10001, X10002, X10004, X10209, X18261, X9230
│   ├── A46, F101-F108, X1984, X9230, X10001, X10002, X10004, X10209
│   ├── A46, F108, X10209
│   ├── A46, G19a, X1770, X13895, X6406, X1984, X10209
│   ├── A473, X11102
│   ├── A6000 DME control unit
│   ├── A6000, X60001, X60002, X60003, X60004, X60005, X60006, X60007
│   ├── A60233 Electromechanical power steering
│   ├── A60233; X01188; X60233; X60234
│   ├── A605,A606,F082,F028,X5116,X5115
│   ├── A605, F026, X1515
│   ├── A65a, B18a, S19a, X111, X161, X18303
│   ├── A65a Dynamic stability control (DSC)
│   ├── A65a, X1746
│   ├── A6 Trailer module
│   ├── A70006 Control unit, transfer box
│   ├── A7000a
│   ├── A7000a Transmission control
│   ├── A7000a, X6410, X8090, X8091, X8500
│   ├── A7000a, X8090, X8091, X8092, X8093, X8500
│   ├── A70020 Transmission control DKG
│   ├── A70020, X70020
│   ├── A72 Steering column switch cluster
│   ├── A72, X10171, X1880
│   ├── A80a EDC Electronic damper control
│   ├── A80a, X10560, X10561, X1807, X1808
│   ├── A80a; X1808;X1807
│   ├── A81a Park distance control (PDC)
│   ├── A81a, X300, X18013, X18362
│   ├── A838a, X3323
│   ├── A838b, N406
│   ├── A838b, X2953
│   ├── A839, X3324
│   ├── A85a Tyre pressure control (RDC)
│   ├── A8680, X8680, F01-F05, A8684, X8684, F09
│   ├── A8681,F06,K6327,X6327,X8681
│   ├── A8682, F07, K6319, X6319, X8682
│   ├── A873, X17178, X17433, X17180, X17177
│   ├── A96a Convertible top module (CTM)
│   ├── A96a, X13039, X13096, X200, X270, X410
│   ├── A96, X13226, Y86
│   ├── B0106,X01295
│   ├── B10508,X10508
│   ├── B10509, X10509, X166
│   ├── B105, X17423, B9801, X17432
│   ├── B106, X0106
│   ├── B109a, B62, M152, R6138, X01143, X01198, X01200, X01201, X4705
│   ├── B109a, B62, M153, X01200, X01201, X14273, X4701
│   ├── B109a, M152, R6138, X14273, X4705
│   ├── B10,X11400
│   ├── B111, X14005
│   ├── B118, X10072
│   ├── B14143, X14143
│   ├── B14144, X14144
│   ├── B14145,X14145, H9117, X10370, H56
│   ├── B14146, X14146, H9115, X10367, H53
│   ├── B14a, M111, M150, X01202, X4704, X4709, X715, Y715
│   ├── B14a, M154, M31, X01202, X4702, X4707
│   ├── B14a, X01202
│   ├── B15a, X11171
│   ├── B162, X10899
│   ├── B168, X10946
│   ├── B16a, X13395, X18145
│   ├── B17a
│   ├── B1
│   ├── B21a, X770
│   ├── B25a, X691, X10151
│   ├── B2
│   ├── B34a, X18020, B35a, X18021, B36a, X18022, B37a, X18023
│   ├── B3
│   ├── B400,B402,X3564
│   ├── B400, X3564
│   ├── B414, X3211
│   ├── B41, X18031
│   ├── B42b, X18032
│   ├── B43a, X18040
│   ├── B43b
│   ├── B44a, X18038
│   ├── B44b
│   ├── B456, X6075
│   ├── B45a, X18037
│   ├── B45b
│   ├── B46a, X18036
│   ├── B47a, X18041
│   ├── B47b
│   ├── B48, X18066
│   ├── B4
│   ├── B57b, X13084
│   ├── B60213,X6151,X6152,X6153,X6154,X6155,X6156,X60253
│   ├── B602, X5067
│   ├── B6042, X10592
│   ├── B604, X87
│   ├── B6203, B6203a, X6203
│   ├── B6205, X6205
│   ├── B6207a, X6207
│   ├── B6207, B6207b, X6207
│   ├── B62101, B62102, B62201, B62202, X62101, X62201
│   ├── B62102, B62202
│   ├── B6214, B6214a, B6224, B6224a, X6214, X6224, X6275, X6276, Y6275, Y6276
│   ├── B6231, X6231
│   ├── B6236, B6236a, X6236
│   ├── B6239, E65390, X6042, X65390, X6540, X6541, Y6540, Y6541
│   ├── B62400, X62400
│   ├── B6249, X18067
│   ├── B62540, B62540a, X62102, X62202, X62540
│   ├── B62,M150,Y715,X4709,X715
│   ├── B64a, X1450
│   ├── B6571a, X6571
│   ├── B66, H77, X10524, X18786
│   ├── B78, X1885
│   ├── B79, X1886
│   ├── B895, B895a, X1369, X13895, X9230
│   ├── B8,X126
│   ├── B9801, X61035
│   ├── E111
│   ├── E126_11, E126_13, E126_4
│   ├── E126, E126_20, E126_21
│   ├── E126, E126_22
│   ├── E127_11, E127_13, E127_4
│   ├── E127_11,E127_4
│   ├── E127, E126, B33a, E27, B32a, B31a, B30a, E26
│   ├── E127, E127_20, E127_21
│   ├── E127, E127_22
│   ├── E128, X13424
│   ├── E129, X13425
│   ├── E130a, X11609
│   ├── E131a, X11619
│   ├── E157,X1014
│   ├── E28, X531
│   ├── E33, X712
│   ├── E34a
│   ├── E35, E36, S77, S78, X381, X382, X401, X402
│   ├── E42a,X18336
│   ├── E445, X384
│   ├── E446, X13275
│   ├── E46a, X319, E80, X329, E81, X328, E47a, X318
│   ├── E52a, X106, E51a, X105
│   ├── E56a, E57a, E58a, E59a
│   ├── E62a, X745
│   ├── E65393, E65394, X65393, X65394, X65399
│   ├── E65395, X6469, X65395, X6989
│   ├── E82, X14275
│   ├── E841, X18845
│   ├── E88, X10138
│   ├── E89, X10139
│   ├── E9032, E9033, X4198, X4199
│   ├── E9, X01058, X18264, Z1
│   ├── E9, X01059, X18265, Z2
│   ├── E9, X18264, Z1
│   ├── E9, X18265, Z2
│   ├── F10, F12, F15, F25, F36, F39, F47, F48, F53, F56, F57, F58, F59, F60, F61, F62, F63, F64, F65, F66, F7
│   ├── F11, F16, F17, F26, F32, F33, F42, F49, F51, F54, F67, F70, F72, F76, F8, F81, F85, F86
│   ├── F13, F20, F21, F23, F24, F27, F28, F29, F30, F37, F40, F43, F44, F5, F55, F71, F75, F84, F87
│   ├── F18, F2, F22, F38, F41, F52, F77, F78, F79, F83, F88
│   ├── F1, F14, F19, F3, F31, F34, F35, F4, F45, F46, F50, F6, F68, F69, F73, F74, F80, F82, F9
│   ├── G12, G13, X010216, X010217
│   ├── G14b, X10216
│   ├── G15b, X10217
│   ├── G30a, X14290
│   ├── G31a, X14291
│   ├── G401,G1
│   ├── G43, X13538
│   ├── G44, X13539
│   ├── G464, X110216
│   ├── G465, X110217
│   ├── G5, X01071, X10172
│   ├── G6430, X10272, X6404, X6430, X6400
│   ├── G6, X782
│   ├── H2a, X132
│   ├── H3a, X133
│   ├── H44, H472b, X1964, X4058
│   ├── H452, X4059
│   ├── H45,X1834,X30087
│   ├── H472a, X4070
│   ├── H50a, H54, I01610, X010365, X01305, X01306, X10365
│   ├── H50a, S127, X324, X256, H54, X404
│   ├── H51, X18191
│   ├── H55, H59a, I01609, X01303, X01304, X0403, X403
│   ├── H58, X18188
│   ├── H66a, X10372
│   ├── H66, X10373
│   ├── H82, X14082
│   ├── H9a, X389, Y5, X623
│   ├── I01004, I01118, X01004, X01118
│   ├── I01032, I01033, I01091, I01092
│   ├── I01046,X6963
│   ├── I01068, K36, K37, K6, K6304
│   ├── I01068, K36, K37, K6, K91
│   ├── I01096
│   ├── I01111a, I01123a, I01128a, M101a, X802, X804, X805
│   ├── I01121,X01185,X18090
│   ├── I01124a, I01127a, X801, X803
│   ├── I01125a
│   ├── I01139
│   ├── I01159
│   ├── I01184
│   ├── I01185, N8c, X10839, W19, X14093, X10840
│   ├── I01186, I01188
│   ├── I01187, X10837, N45b, X10838
│   ├── I01197
│   ├── I01198, I01199
│   ├── I01201, X370, I01200, X360, X201, I01209, X255
│   ├── I01202, I01208, X320, X380, X510
│   ├── I01203,X310,X400,X0300
│   ├── I01204, I01207, X0710, X700
│   ├── I01206, I01205, X266
│   ├── I01207, I01591, X700, X710
│   ├── I01238, X13916
│   ├── I01239, X13917
│   ├── I01248
│   ├── I01249,X01248,X01249
│   ├── I01250, I01251, I01252
│   ├── I01250,X01250
│   ├── I01252,X01252
│   ├── I01261
│   ├── I01265,X01265
│   ├── I01561,X4211
│   ├── I01566,X4202
│   ├── I01569,X01292,X01293
│   ├── I01570,X01294
│   ├── I01588, I01589, X19616, X19617
│   ├── I01590, X0320
│   ├── I14255
│   ├── K18363a, K18364a, M101a, X500, X501
│   ├── K2085, X02085
│   ├── K213, X6304
│   ├── K411, K424, K441, X2898, X3022
│   ├── K411, K424, K441, X2898, X3151, X4096
│   ├── K6300
│   ├── K6319, K6341, X6319, X6341
│   ├── K6539, X6539, X60552, A8685, X8685, F010
│   ├── K9137, X14188
│   ├── M101a, X02041, X02377, X440, X460
│   ├── M111, M30, N2, X18722, X4704
│   ├── M111, M30, X18722, X4704
│   ├── M119a, X17140
│   ├── M119a, X1714
│   ├── M137a, X18093
│   ├── M16, X312
│   ├── M179
│   ├── M17a, X311
│   ├── M180a,X0186
│   ├── M180, X997
│   ├── M1997, X16663
│   ├── M20b, X13256
│   ├── M214, M218, X14012, X1533, X727, X728
│   ├── M222, X10590
│   ├── M22b, X13257
│   ├── M2, X5078, X638, X679
│   ├── M31, X4707
│   ├── M35a, X4706
│   ├── M37a, X10131, X10167, X1651
│   ├── M37, X122, X170, X85, Y4a
│   ├── M38, X4708
│   ├── M3a, X333
│   ├── M455, N38a, X13812, X13817
│   ├── M462, M463, X16946, X16947
│   ├── M4723, X4723
│   ├── M4729, X4729
│   ├── M4, M7, S136a, X10046, X1011, X107
│   ├── M53a, X1467, X729, X1091
│   ├── M54a, X731
│   ├── M55b, X11585, X1503, X1927, Y193, Y206
│   ├── M56b, X011585, X01503, X01927, Y0206, Y194
│   ├── M57a, X0731
│   ├── M59a, X0728, X014012, M61a, X0727, X01533
│   ├── M6035, X6035, X6455
│   ├── M6351, X6351
│   ├── M6353,X6353
│   ├── M63, X1124
│   ├── M6506, X6506
│   ├── M8533, R8554, X8540, X8554
│   ├── M8540, X18039, X18077
│   ├── M89, X13100
│   ├── M89,X13100
│   ├── M92; X13103
│   ├── M9910a, X13879, I01012, X13880
│   ├── M9, X13800, X1797
│   ├── M9, X1797
│   ├── N22 CD changer
│   ├── N22, X18180, X10639
│   ├── N24,X13044
│   ├── N24, X13044, X13227, Y85
│   ├── N27a, X13323, X1765, X13337
│   ├── N38a CCC M-ASK
│   ├── N38a, X13387, X13464, X14055, X14244, X17185, X3494
│   ├── N38a, X13812, X13813, X13814, X13815, X13816, X13817, X13820
│   ├── N38a, X13812, X13813, X13814, X13815, X13816, X13820
│   ├── N38b Car Information Computer CIC
│   ├── N38b, X13464, X13812, X13813, X13814, X13815, X13816, X13817, X14244, X17425, X17427, X3494
│   ├── N406, X3829, X4370, X4592
│   ├── N47a, X10610, X10636, X13386
│   ├── N47 Satellite receiver
│   ├── N47, X14062, X14063, X14066
│   ├── N48 Digital tuner US
│   ├── N48,X014132,X14132,X14130,X14131,X17197,I01220
│   ├── N49
│   ├── N9 Radio
│   ├── N9, X13812, X13813, X13814, X13815, X13816
│   ├── N9, X13812, X13813, X13814, X13815, X13816, X14066
│   ├── Notes on the content and handling of diagnosis documents in ISTA
│   ├── R12,X981
│   ├── R1,S18a,X516,X692,X13822
│   ├── R401, X3627
│   ├── S0241, S8503a, X4444, X8503
│   ├── S0289, S138, S55, S56, X011584, X013371, X018213, X659
│   ├── S0289, S55, S56, X011584, X013371, X659
│   ├── S103, X18124
│   ├── S122, X018124
│   ├── S13772, X10516, X8503
│   ├── S138, X018213
│   ├── S139, S289, S50, S52, X11584, X13371, X18213, X652
│   ├── S139, X18213
│   ├── S141, X13042
│   ├── S172a, X13107, E43a, X709, E44a, X710
│   ├── S2101, X1492
│   ├── S224a,S227,Y19,X1561,X1599,X14274,X9944
│   ├── S227a Gear selector switch
│   ├── S227a, X11152, X1708, Y19a
│   ├── S251, X10662
│   ├── S263, X10712, E113
│   ├── S264, X10713, E114
│   ├── S289, S52, X11584, X652
│   ├── S29, X78
│   ├── S31a, X423
│   ├── S4017, X34068
│   ├── S419, X11640, X329, M79a, X11635
│   ├── S41a, X645
│   ├── S42a, X647
│   ├── S47, X747, X10323, X623, M21, X749, X849
│   ├── S492,X4443
│   ├── S4a
│   ├── S50, X13371
│   ├── S559a, X19565
│   ├── S559, X19565
│   ├── S58a, S59a
│   ├── S63b, X112
│   ├── S700, X18490, X13103
│   ├── S7
│   ├── S805a, X13635
│   ├── S8511, X8511
│   ├── T6151, T6152, T6153, T6154, T6155, T6156, X6176, X6177
│   ├── U400a, X14133, X14134, X4303
│   ├── U400b, X13362, X13906, X14081, X14092
│   ├── U400b, X14133, X14134
│   ├── U400c, X14081
│   ├── U400d, X14081
│   ├── U400e ULF-SBX-H
│   ├── U400e, X14081, X14134, X17182, X17397
│   ├── U500 Combox
│   ├── U500,X34129,X34130,X34131,X34139
│   ├── V10
│   ├── V551, X3200, X3201, X3190
│   ├── W10a, X13655
│   ├── W13a, X13658
│   ├── W14, X13659
│   ├── W61,W62
│   ├── W62, X13908
│   ├── W8, X13393
│   ├── W9a, X13654
│   ├── X0187,X0188,I01571,Y11
│   ├── X10503,B9529
│   ├── X11008, X11007, X11004, X04010, A4010a, A4010
│   ├── X120, X13720, X13772, X13773, X14035, Y14035
│   ├── X13172, Y198
│   ├── X13226, X13663, X11166, X3507, A13663
│   ├── X13227, X14305, Y85
│   ├── X13376,X10318,A149a
│   ├── X13719, A467, X13718
│   ├── X13864, Y13864
│   ├── X14028,S2a,S14028,X3650,X516,S18a
│   ├── X14040, Y14040a
│   ├── X14064,A16761
│   ├── X14064, H34a, X138
│   ├── X16766,I01260
│   ├── X1809, Y401
│   ├── X1810, Y402
│   ├── X1811, Y403
│   ├── X1812, Y404
│   ├── X19527, S204, X1295, E61a, X748, H40, X14278
│   ├── X328, S167b, X11638, M85, X11636
│   ├── X6120, X62400, X6390, Y6120, Y6390, Y63900
│   ├── X6229, B6229
│   ├── X624, X10324, S49, X742, M23, X744, X891
│   ├── X6279, Y6279
│   ├── X82, M9
│   ├── Y410, X2510
│   ├── Y6101, Y6102, Y6103, Y6104, Y6105, Y6106
│   ├── Y6131, X6131
│   ├── Y6384, X6384
│   ├── Y6, X624, H8a, X390
│   ├── Y86
│   └── Z401, X3458, X2780
├── Functional Wiring Diagrams
│   └── Juction Box
├── Power Train
│   ├── 8-speed automatic gearbox 8HP
│   ├── Accelerator pedal module
│   ├── Air flap control
│   ├── Air supply
│   ├── Alternator
│   ├── Automatic engine start-stop function
│   ├── Automatic engine start-stop
│   ├── Bit-serial data interface (BSD)
│   ├── Brake light switch
│   ├── BSD alternator
│   ├── Bus systems
│   ├── Camshaft sensor
│   ├── Car access system (CAS)
│   ├── Comfort Access System
│   ├── Comparison Images EWS Oscilloscope Measurement
│   ├── Comparison images for interlock locking pawl
│   ├── Controllable engine mounts
│   ├── Control unit, Car access system (CAS)
│   ├── Convenient start
│   ├── Corrosion on the intake temperature sensor
│   ├── Diagnostic module for tank leaks (DMTL)
│   ├── Diagnostic module, fuel tank leakage
│   ├── DKG power supply
│   ├── Drive and output speed sensor
│   ├── Dual knock sensor
│   ├── E-box fan
│   ├── Electric coolant pump
│   ├── Electronically controlled fuel pump
│   ├── Electronic control of the electric fuel pump
│   ├── Electronic immobiliser
│   ├── Energy diagnosis_ Terminal control
│   ├── Engine control
│   ├── Engine management
│   ├── engineN52
│   ├── Engine start sporadically not possible
│   ├── Exhaust flap
│   ├── Fuel tank vent valve
│   ├── Gearbox leakage
│   ├── Gearbox oil temperature sensor
│   ├── Gearbox position sensor
│   ├── Gear selector switch (gear lever)
│   ├── Gear selector switch
│   ├── Gearshift paddles
│   ├── General reference to functional description
│   ├── GM6 automatic gearbox
│   ├── Intake air temperature sensor
│   ├── Intelligent battery sensor (IBS)
│   ├── Knock Control
│   ├── Map cooling
│   ├── Mechanical troubleshooting manual for the tank leak diagnosis
│   ├── Mechatronics of the automatic transmission
│   ├── Mechatronic solenoid valves (MV), electronic pressure control valves (EDS)
│   ├── Mechatronics
│   ├── Mechatronic speed sensors for turbine and output
│   ├── MS45 MSV80_ EAC sensor
│   ├── MSA and power management
│   ├── MSA test module for brake partial vacuum sensor (BUS)
│   ├── MSA test module 'zero gear sensor'
│   ├── MSV70 Simultaneous operation of accelerator and brake pedals
│   ├── NG6 - dig in bearing bank
│   ├── Nominal values for accelerator pedal module
│   ├── Non-return valve
│   ├── Notice regarding [!] Current fault patterns
│   ├── Oil condition sensor
│   ├── Oil pressure sensors
│   ├── Parking lock
│   ├── Schematic circuit diagram, bus diagnosis
│   ├── Secondary air system
│   ├── Setpoint values for the gearshift rods (SST)
│   ├── Solenoid valves, electronic pressure control valves
│   ├── Supply, DME control unit
│   ├── Supply, transmission control
│   ├── Terminal control
│   ├── Test images, remote key insertion
│   ├── Torque converter
│   ├── Transmission control
│   ├── Transmission control unit
│   ├── Twin-clutch gearbox
│   ├── Valve gear
│   └── Vehicle speed control
└── Special Vehicle
├── 12 V sockets
├── Antenna microphone RTK-6 (offset control)
├── Blue flashlights on boot lid
├── Bosch radio, disguised
├── Bosch radio, unconcealed
├── Charge socket
├── Engine run-on circuit
├── Front flashing beacon, H303244nsch RTK-6
├── Front flashing beacon, H303244nsch RTK-7
├── Front flashing beacon, H303244nsch UKE
├── Gun mount
├── Hands-free facility, 2 m radio
├── Hands-free facility, 4 m radio
├── Intermittent high beam, iDrive
├── Intermittent high beam
├── Low-beam circuit for police in Bavaria
├── Mobile phone preparation, Dabendorf
├── Police radio in Azerbaidzan
├── Power supply for control unit, control menu
├── Power supply for emergency service vehicles
├── Power supply for switch cluster, officials utility, disguised
├── Power supply for switch cluster, officials utility
├── Radio engagement TX9 RTK-6
├── Radio mute
├── Radio Teledux 9 with double masking
├── RAG
├── RTK-6 with offset speakers
├── RTK-7 with controls
├── Sepura Car Kit (Tetra)
├── Sequence of tones control unit supply
├── Signal system RTK-6
├── Special signal system UKE
├── UDS
└── Yellow flashlights on boot lid

Additional 10% off on US$30+ order paid with Credit Card: 10POFF.

To pay in your local currency (EURO, GBP, AUD, CAD, HKD, JPY, etc.), please contact us.