Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Toyota Prius 1997-2015. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Toyota Prius 1997-2015 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
REPLACEMENT
1. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)
2. REMOVE ENGINE UNDER COVER (w/ Cover)
3. DRAIN COOLANT (for Engine)
NOTICE:
Do not remove the reservoir tank cap, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
(a) Loosen the radiator drain cock plug and drain the coolant.
HINT: Collect the coolant in a container and dispose of it according to the local regulations.
(b) Loosen the cylinder block drain cock plug.
HINT: The plug is on the back of the generator on the exhaust manifold side.
4. ADD COOLANT (for Engine)
(a) Tighten the radiator drain cock plug.
(b) Tighten the cylinder block drain cock plug.
Torque: 13 N·m (130 kgf·cm, 9ft·lbf)
(c) Remove the reservoir tank cap.
(d) Connect the hose to the air release valve.
(e) Loosen the air release valve.
(f) Add TOYOTA Super Long Life Coolant (SLLC) to the reservoir tank filler opening until coolant overflows from the air release valve. Then tighten the air release valve.
...