Complete service repair manual for John Deere Skid Steer and Compact Track Loaders Models 318E, 319E, 320E and 323E with EH Controls and FT4/S4 Engines, with all the technical information to maintain, service, and repair like professional mechanics.

John Deere Skid Steer Loaders & Compact Track Loaders 318E, 319E, 320E, 323E (EH Control) workshop service & repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM13011X19 - John Deere 318E, 319E, 320E, and 323E Skid Steer and Compact Track Loader (EH Controls) Technical Manual (Repair).pdf
tm13011x28 - John Deere Chargeurs compacts et chargeurs compacts à chenilles 318E, 319E, 320E, 323E et 324E (commandes électrohydrauliques).pdf

Total Pages: 651 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable)
Category: Repair
Language: English French
Published on 2019/10/08

MAIN SECTIONS
Foreword
   Manual Identification-READ THIS FIRST!
   General Information
      Safety
      Torque Values
   Wheels (or) Tracks
      Powered Wheels and Fastenings
      Track System
   Axles and Suspension Systems
      Drive Axle Housing and Support
      Axle Shaft, Bearings, and Reduction Gears
   Transmission
      Controls Linkage
      Flywheel Coupler
      Hydraulic System
   Engine
      Removal and Installation
   Engine Auxiliary System
      Cooling Systems
      Intake System
      External Exhaust Systems
      External Fuel Supply Systems
   Frame or Supporting Structure
      Frame Installation
   Operator's Station
      Removal and Installation
      Operator Enclosure
      Seat and Seat Belt
      Heating and Air Conditioning
   Sheet Metal and Styling
      Hood or Engine Enclosure
   Safety and Convenience
      Radio
   Main Hydraulic System
      Hydraulic System
   Loader
      Attachment Coupler
      Control Linkage
      Frame
      Hydraulic System
   Dealer Fabricated Tools

Total Pages: 664 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable, high quality)
Language: English

TABLE OF CONTENTS - Expanded View
00 - Foreword
00 - General Information
   01 - Safety
      Add and Operate Attachments Safely
      Avoid Backover Accidents
      Avoid High-Pressure Fluids
      Avoid High-Pressure Oils
      Avoid Machine Tip Over
      Avoid Static Electricity Risk When Refueling
      Avoid Unauthorized Machine Modifications
      Avoid Work Site Hazards
      Clean Debris from Machine
      Clean Exhaust Filter Safely
      Dispose of Waste Properly
      Drive Metal Pins Safely
      Follow Safety Instructions
      Handle Cab Door Safely
      Handle Chemical Products Safely
      Inspect and Maintain ROPS
      Inspect Machine
      Keep Riders Off Machine
      Make Welding Repairs Safely
      Operate Only If Qualified
      Operating On Slopes
      Operating or Traveling On Public Roads
      Park and Prepare for Service Safely
      Prepare for Emergencies
      Prevent Battery Explosions
      Prevent Fires
      Prevent Unintended Machine Movement
      Recognize Safety Information
      Remove Paint Before Welding or Heating
      Service Cooling System Safely
      Service Tires Safely
      Start Only From Operator's Seat
      Stay Clear of Moving Parts
      Use and Maintain Seat Belt
      Use Steps and Handholds Correctly
      Wear Protective Equipment
      Work In Ventilated Area
   01 - Safety
   03 - Torque Values
      Additional Metric Cap Screw Torque Values
      Check Oil Lines And Fittings
      Inch Series Four Bolt Flange Fitting For High Pressure Service Recommendations
      Metric Bolt and Cap Screw Torque Values
      O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For High Pressure Service Recommendations
      O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For Standard Pressure Service Recommendations
      O-Ring Face Seal Fittings With SAE Inch Hex Nut And Stud End For High Pressure Service Recommendations
      Service Recommendations for 37° Flare and 30° Cone Seat Connectors
      Service Recommendations For Flared Connections—Straight or Tapered Threads
      Service Recommendations For Inch Series Four Bolt Flange Fittings
      Service Recommendations for Metric Series Four Bolt Flange Fitting
      Service Recommendations for O-Ring Boss Fittings
      Unified Inch Bolt and Cap Screw Torque Values
   03 - Torque Values
00 - General Information
00 - Manual Identification—READ THIS FIRST!
01 - Wheels or Tracks
   Drive Sprocket Remove and Install
   Front Idler Yoke Assembly Remove and Install
   Front or Rear Idler Remove and Install
   Measure Rubber Track Height
   Tire Remove and Install
   Track Adjuster and Recoil Spring Assembly Remove and Install
   Track Adjuster Cylinder Disassemble and Assemble
   Track Adjuster Recoil Spring Remove and Install
   Track Remove and Install
   Track Roller Remove and Install
   Wheel Remove and Install
01 - Wheels or Tracks
02 - Axles and Suspension Systems
   Axle Housing Disassemble and Assemble
   Axle Housing Remove and Install
   Chain Case Access Plate Remove and Install
   Drive Chain and Sprocket Remove and Install
02 - Axles and Suspension Systems
03 - Transmission
   15 - Control Linkage
      Joystick Disassemble and Assemble
      Left and Right Joystick Remove and Install
   15 - Control Linkage
   25 - Flywheel Coupler
      Hub Coupler Remove and Install
   25 - Flywheel Coupler
   60 - Hydraulic System
      Charge Pump Remove and Install
      Gear Case Leakage Test
      Hydrostatic and Hydraulic Start-Up Procedure
      Hydrostatic Control Valve Disassemble and Assemble
      Hydrostatic Control Valve Remove and Install
      Hydrostatic Motor and Park Brake Assemble—Two Speed
      Hydrostatic Motor and Park Brake Disassemble and Assemble
      Hydrostatic Motor and Park Brake Disassemble—Two Speed
      Hydrostatic Motor and Park Brake Inspection—Two Speed
      Hydrostatic Motor and Park Brake Remove and Install
      Hydrostatic Motor and Park Brake Remove and Install—Two Speed
      Hydrostatic Motor and Park Brake Repair
      Hydrostatic Motor, Park Brake, and Gear Case Assemble
      Hydrostatic Motor, Park Brake, and Gear Case Disassemble
      Hydrostatic Motor, Park Brake, and Gear Case Inspection
      Hydrostatic Motor, Park Brake, and Gear Case Remove and Install
      Hydrostatic Motor, Park Brake, and Gear Case Repair
      Hydrostatic Pump Disassemble and Assemble
      Hydrostatic Pump Remove and Install
      Inspect Metal Face Seals
      Measuring Park Brake Piston Movement—Two Speed
      Park Brake Solenoid Valve Remove and Install
      Return Manifold Screen Remove and Install
   60 - Hydraulic System
03 - Transmission
04 - Engine
   Accessory Drive Belt Tensioner Remove and Install
   Compressor Bracket Remove and Install
   Damper Plate Remove and Install
   Engine Oil Dipstick Tube Remove and Install
   Engine Remove and Install
   John Deere Engine
   Starter Motor Remove and Install
04 - Engine
05 - Engine Auxiliary Systems
   Air Cleaner Remove and Install
   Cooling Package Remove and Install
   Diesel Particulate Filter (DPF) Remove and Install
   Exhaust Filter Remove and Install
   Exhaust Tube Remove and Install
   Fan Remove and Install
   Final Fuel Filter Assembly Remove and Install
   Fuel Tank Remove and Install
   Low-Pressure Fuel Pump Remove and Install
   Primary Fuel Filter and Water Separator Assembly Remove and Install
   Radiator Remove and Install
05 - Engine Auxiliary Systems
17 - Frames, Chassis, or Supporting Structure
   Counterweight Remove and Install
   Raising and Blocking Machine
   Welding On Machine
   Welding Repair of Major Structure
17 - Frames, Chassis, or Supporting Structure
18 - Operator's Station
   00 - Removal & Installation
      Operator's Station Remove and Install
   00 - Removal & Installation
   10 - Operator's Enclosure
      Cab Door Remove and Install
      Raising Operator's Station
      Rear Window Remove and Install
      Side Window Remove and Install
      Top Window Remove and Install
   10 - Operator's Enclosure
   21 - Seat & Seat Belt
      Interlocking Seat Bar Remove and Install
      Seat Air Spring Remove and Install
      Seat Belt Remove and Install
      Seat Remove and Install
   21 - Seat & Seat Belt
   30 - Heating & Air Conditioning System
      Air Conditioner and Heater Remove and Install
      Air Conditioner Compressor Remove and Install
      Blower Fan Remove and Install
      Charge R134a System
      Condenser Remove and Install
      Evacuate R134a System
      Evaporator Remove and Install
      Expansion Valve Remove and Install
      Flush and Purge Air Conditioner System
      Heater Core Remove and Install
      R134a Refrigerant Oil Information
      R134a Refrigerant Recovery, Recycling, and Charging Station Installation Procedure
      Receiver-Dryer Remove and Install
      Recover R134a Refrigerant
      Refrigerant Cautions and Proper Handling
   30 - Heating & Air Conditioning System
18 - Operator's Station
19 - Sheet Metal and Styling
   Engine Cover Remove and Install
   Footwell Remove and Install
   Side Panel Remove and Install
19 - Sheet Metal and Styling
20 - Safety, Convenienence and Miscellaneous
   Radio Antenna Remove and Install
20 - Safety, Convenienence and Miscellaneous
21 - Main Hydraulic System
   General Oil Cleanup Procedure
   High Flow Hydraulic Pump Disassemble and Assemble
   Hydraulic Fan Motor Remove and Install
   Hydraulic _ Hydrostatic Component Failure Cleanup Procedure
   Hydraulic Oil Cooler Remove and Install
   Hydraulic Oil Reservoir Remove and Install
   Hydraulic Pump Disassemble and Assemble
   Hydraulic Pump Remove and Install
   Vacuum Pump Installation
21 - Main Hydraulic System
31 - Loader
   04 - Attachment Coupler
      Quik-Tatch™ Actuator Remove and Install
      Quik-Tatch™ Coupler Remove and Install
   04 - Attachment Coupler
   40 - Frames
      Boom Lock Disassemble and Assemble
      Boom Lock
      Boom Lock Remove and Install
      Boom Remove and Install
      Lower Boom Link Remove and Install
      Upper Boom Link Remove and Install
   40 - Frames
   60 - Hydraulic Systems
      Boom Cylinder Remove and Install
      Bucket Cylinder Remove and Install
      Control Valve Disassemble and Assemble
      Control Valve Remove and Install
      Hydraulic Cylinder Bleed Procedure
      Hydraulic Cylinder Disassemble and Assemble
      Hydraulic Oil Filter Manifold Remove and Install
      Ride Control Accumulator Remove and Install
      Ride Control Valve Disassemble and Assemble
      Ride Control Valve Remove and Install
      Self Leveling Valve Remove and Install
   60 - Hydraulic Systems
31 - Loader
99 - Dealer Fabricated Tools
   DFT1087 Track Recoil Spring Disassembly and Assembly Guard Tool
   DFT1101 Boom Lifting Bracket
   DFT1325 Solenoid Power Harness
   DFT1333 Lock Nut Wrench
   DFT1334 Gear Case Turning Tool
   DFT1335 Park Brake Spring Compressor
   DFT1336 Bias Spring Compressor
   DFT1358 Engine Lifting Bracket
   DFT1359 Engine Lifting Bracket
   JT38077 Boom Pin Driver
   ST4920 Track Recoil Spring Disassembly and Assembly Tool
99 - Dealer Fabricated Tools

John Deere Skid Steer Loaders & Compact Track Loaders 318E, 319E, 320E, 323E (Manual Controls) Repair Service Manual (TM13011X19)