Complete service Repair Manual Supplement for John Deere Excavator Logger 330LC, 370, with all the technical information to maintain, repair, and rebuild like professional mechanics.

John Deere Excavator Logger 330LC, 370 workshop repair manual Supplement includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM1911 - John Deere 330LC and 370 Excavator Logger Repair Supplement (S.N. 081001-)Technical Manual.pdf

Total Pages: 556 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable)
Language: English
Category: Repair
Published on 2005/02/21

MAIN SECTIONS (SN. 081001-)
 Foreword
   Technical Information Feedback Form
   General Information
      Safety
      General Specifications
      Torque Values
      Fuels and Lubricants
   Tracks
      Track System
   Axles and Suspension Systems
      Axle Shaft, Bearings, and Reduction Gears
      Hydraulic System
   Engine Auxiliary Systems
      Cold Weather Starting Aids
      Speed Controls
      External Exhaust Systems
      External Fuel Supply Systems
   Electrical System
      Batteries, Support, and Cables
      Wiring Harness and Switches
      System Controls
   Frame or Supporting Structure
      Frame Installation
      Frame Bottom Guards
      Chassis Weights
   Operator's Station
      Removal and Installation
      Operator Enclosure
      Steps and Handholds
      Heating and Air Conditioning
   Sheet Metal and Styling
      Miscellaneous Shields
   Safety and Convenience
      Fire Extinguisher
      Horn and Warning Devices
   Pneumatic Systems
      Removal and Installation
   Excavator
      Frames
      Hydraulic System
   Dealer Fabricated Tools
tm1911 - 330LC and 370 Excavator Logger Repair Supplement (S.N. 081001-)
Table of Contents
Foreword
Technical Information Feedback Form
Section 00: General Information
Group 01: Safety
John Deere Excavator Logger Safety Features
Recognize Safety Information
Understand Signal Words
Follow Safety Instructions
Inspect Machine
Use Handholds and Steps
Use Seat Belt
Maintain Seat Belt
Move and Operate Machine Safely
Operate Only From Operator's Seat
Secondary Exits
Operate Machine Safely
(Road Builder) Dig with Caution
Operate with Caution
Avoid Tipping
Avoid Power Lines
Drive Machine Safely
Beware of Exhaust Fumes
Park Machine Safely
Keep Riders Off Machine
Operate Attachment Safely
Keep the Operator Protective Structure (OPS) in Place
Handle Fluids Safely-Avoid Fires
Prepare for Emergencies
Handle Starting Fluid Safely
Clean Trash from Machine
Protect Against Flying Debris
Wear Protective Clothing
Protect Against Noise
Handle Chemical Products Safely
Warn Others of Service Work
Stay Clear of Moving Parts
Support Machine Properly
Service Cooling System Safely
Practice Safe Maintenance
Remove Paint Before Welding or Heating
Avoid Heating Near Pressurized Fluid Lines
Avoid High-Pressure Fluids
Prevent Battery Explosions
Clean the Machine Regularly
Store Attachments Safely
Dispose of Waste Properly
Group 02: General Specifications
330LC Log Loader With Logger Front Live Heel Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Forestry Cab-Specifications
330LC Log Loader With Logger Front B-N-T Grapple With 3100 mm (10 Ft 2 In.) Track Gauge, Rear Entry Cab and Heavy Duty Belly Pan-Specifications
370 Log Loader With Logger Front Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry Cab -Specifications
370 Road Builder With 2692 mm (8 Ft 10 In.) Track Gauge Specifications
330LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 4 m (13 Ft 1 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge Working Ranges
330LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 3.2 m (10 Ft 6 In.) Arm and 2692 mm (8 Ft 10 In.) Track Working Ranges
330LC Log Loader Logger Front Live Heel Grapple with Rear Entry Cab Working Ranges
330LC Log Loader Logger Front B-N-T Grapple Working Ranges
370LC Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 4 m (13 Ft 1 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge with Forestry Cab Working Ranges
370 Log Loader Excavator Combo Front with Boom Cylinder Lift Adapter Live Heel Grapple, 32 m (10 Ft 6 In.) Arm and 2692 mm (8 Ft 10 In.) Track Gauge with Forestry Cab Working Ranges
370 Log Loader Logger Front Live Heel Grapple Working Ranges
330LC Road Builder Working Ranges
370 Road Builder Working Ranges
330LC/370 Excavator Logger Engine Specifications
330LC and 370 Drain and Refill Capacities
Lift Capacity-330LC Logger Live Heel Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Rear Entry or Forestry Cab
Lift Capacity-330LC Logger Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab
Lift Capacity-330LC Logger Butt-N-Top Grapple With 2921 mm (9 Ft 7 In.) Track Gauge and Forestry Cab
Lift Capacity-330LC Logger Butt-N-Top Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab
Lift Capacity-330LC Logger Road Builder With 2692 mm (8 Ft 10 In.) Track Gauge, 1179 kg (2,600 lb) Bucket
Lift Capacity-370 Logger Live Heel Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab
Lift Capacity-370 Logger Butt-N-Top Grapple With 3100 mm (10 Ft 2 In.) Track Gauge and Rear Entry or Forestry Cab
Lift Capacity-370 Logger Road Builder With 2591 mm (8 Ft 10 in.) Track Gauge, 1179 kg (2,600 lb) Bucket
Group 03: Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Metric Bolt and Cap Screw Torque Values
Additional Metric Cap Screw Torque Values
Check Oil Lines and Fittings
Service Recommendations for O-Ring Boss Fittings
Service Recommendations for Flat Face O-Ring Seal Fittings
Service Recommendations for 37° Flare and 30° Cone Seat Connectors
Service Recommendations For Flared Connections-Straight or Tapered Threads
Service Recommendations For Inch Series Four Bolt Flange Fittings
Service Recommendations for Metric Series Four Bolt Flange Fitting
Group 04: Fuels and Lubricants
Diesel Fuel
Dieselscan Fuel Analysis
Lubricity Of Diesel Fuels
Low Sulfur Diesel Fuel Conditioner
Diesel Fuel Storage
Fuel Tank
Do Not Use Galvanized Containers
Diesel Engine Oil
Hydraulic Oil
Cab and Riser Tilt Power Pack Oil
Swing Gearbox, Propel Gearbox and Pump Gearbox Oils
Track Roller, Front Idler, and Carrier Roller Oil
Track Adjuster, Working Tool Pivot, Swing Bearing, and Swing Bearing Gear Grease
Oil Filters
Lubricant Storage
Alternative and Synthetic Lubricants
Mixing of Lubricants
Section 01: Tracks
Group 0130: Track System
Service Equipment and Tools
Other Material
Specifications
Remove and Install Rock Guards
Measure Track Roller Wear
Remove and Install Track Roller
Remove and Install Track Carrier Roller
Disassemble and Assemble Track Carrier Roller
Measure Track Chain Link Wear
Measure Track Chain Bushing Wear
Adjust Track Sag
Disassemble and Assemble Track Adjuster Cylinder-330LC
Section 02: Axles and Suspension Systems
Group 0250: Axle Shaft, Bearings, and Reduction Gears
Specifications
Remove and Install Propel Gearbox-330LC
Group 0260: Hydraulic System
Service Equipment and Tools
Specifications
Remove and Install Propel Motor and Park Brake-330LC
Section 05: Engine Auxiliary Systems
Group 0505: Cold Weather Starting Aids
Other Material
Remove and Install Cold Weather Start Aid
Group 0515: Speed Controls
Specifications
Engine Speed Learning Procedure-Rear Entry Cab
Engine Speed Learning Procedure-Forestry and Road Builder Cab Excavator Logger
Group 0530: External Exhaust Systems
Remove and Install Muffler
Group 0560: External Fuel Supply Systems
Other Material
Specifications
Remove and Install Fuel Tank (Standard With Counterweight Tank)-330LC/370
Remove and Install Fuel Tank (High Capacity)-330LC/370
Section 16: Electrical System
Group 1671: Batteries, Support, and Cables
Charge Battery (Rear Entry Cab)
Adding 12-Volt Accessories
Group 1674: Wiring Harness and Switches
Functional Schematic and Component Location Legend
Forestry Cab Component Location Drawing
Rear Entry Cab Component Location Drawing
Road Builder Cab Component Location Drawing
Live Heel Grapple Frame Component Location Drawing
Butt-N-Top Grapple Frame Component Location Drawing
Road Builder Frame Component Location
Combo Machine Frame
Connecting Engine and Pump Controller (EPC) Harness Connector
Replacing Fuses Rear Entry Cab
Replacing Fuses-Forestry and Road Builder Cab
Fuse (Blade-Type) Color Codes
Remove and Install Forestry Cab Ground Straps
Remove and Install 24-Volt to 12-Volt Power Converter
Group 1675: System Controls
Welding On Machine
Remove and Install Engine and Pump Controller (EPC) (Forestry and Road Builder Cab)
Remove and Install Engine and Pump Controller (EPC) (Rear Entry Cab)
Section 17: Frame or Supporting Structure
Group 1740: Frame Installation
Welding On Machine
Group 1746: Frame Bottom Guards
Specifications
Under Decking Covers
Extreme Duty Swivel Guard
Group 1749: Chassis Weights
Service Equipment and Tools
Specifications
Remove and Install Counterweight
Remove and Install Counterweight With Fuel Tank
Section 18: Operator's Station
Group 1800: Removal and Installation
Specifications
Remove and Install Rear Entry Cab
Remove and Install Cab - Road Builder and Forestry Machines
Remove and Install Cab with Riser - Road Builder and Forestry Machines
Group 1810: Operator Enclosure
Other Material
Remove and Install Window Panel and Two Piece Molding
Remove and Install Rear Entry Cab Front and Door Windows
Remove and Install Cab Door Windows (Road Builder Machine)
Remove and Install Rear Entry Cab Right Side Window
Remove and Install Rear Entry Cab Door
Remove and Install Left Hand Window Guard - Rear Entry Cab
Remove and Install Left Side Windows - Rear Entry Cab
Remove and Install Cab Front OSHA Window
Remove and Install Rear Entry Cab OSHA Windows
Remove and Install Cab Front Window (Forestry Machine)
Remove and Install Cab Front Windows (Road Builder Machine)
Remove and Install Right Hand and Left Hand Front Window (Forestry Machine)
Remove and Install Left Hand and Right Hand Sliding Window (Forestry Machine)
Remove and Install Cab Left Hand Rear Window (Road Builder Machine)
Remove and Install Cab Right Hand Window (Road Builder Machine)
Remove and Install Rear Escape Window (Forestry Machine)
Remove and Install Rear Escape Window (Road Builder Machine)
Remove and Install Roof Window (Forestry Machine)
Remove and Install Cab Door (Forestry Machine)
Group 1822: Steps and Handholds
Specifications
Remove and Install High Capacity Fuel Tank (Option) Handhold
Remove and Install Step (72 Inch Rear Entry Cab)
Remove and Install Right Side Handrail
Remove and Install Right Side Handrail - Machines with Counterweight Fuel Tank
Remove and Install Left Side Handrail
Group 1830: Heating and Air Conditioning
Specifications
Heater and Air Conditioner
Remove and Install Air Conditioning Piping (Rear Entry Cab)
Remove and Install Receiver Dryer (Rear Entry Cab)
Remove and Install Receiver Dryer (Road Builder and Forestry Machines)
Remove and Install Heater Control Module (Rear Entry Cab)
Remove and Install Evaporator (Rear Entry Cab)
Remove and Install Heater Core and Blower Motor (Forestry and Road Builder Cab)
Remove and Install Heater Core and Blower Motor (Rear Entry Cab)
Remove and Install Heater Hoses (Forestry and Road Builder Cab)
Remove and Install Heater Hoses (Rear Entry Cab)
Section 19: Sheet Metal and Styling
Group 1913: Miscellaneous Shields
Remove and Install Log Deflector
Remove and Install Standard Side Guarding-330LC and 370 Loggers
Remove and Install High Profile Side Guarding With Counterweight Fuel Tank-330LC/370
Remove and Install Side Guarding With High Capacity Fuel Tank-330LC/370
Remove and Install Boom Mounted Arm Cylinder Guard
Remove and Install Boom Cylinder Guard
Section 20: Safety and Convenience
Group 2003: Fire Extinguisher
Remove and Install Fire Extinguisher
Group 2004: Horn and Warning Devices
Remove and Install Air Horn
Section 22: Pneumatic Systems
Group 2200: Removal and Installation
Remove and Install Air Compressor
Remove and Install Accumulator
Remove and Install Check Valve
Remove and Install Pressure Switch
Remove and Install Drain Valve
Remove and Install Air Horn Solenoid
Remove and Install Tilt Power Pack
Section 33: Excavator
Group 3340: Frames
Service Equipment and Tools
Specifications
Remove and Install Combo Piping
Remove and Install Thumb Piping (If Equipped)
Thumb Pilot Hydraulic Plumbing
Remove and Install Bucket Cylinder Guard
Remove and Install Arm (330LC/370 Live Heel Grapple)
Remove and Install Arm (Butt-N-Top Grapple)
Remove and Install Boom (Live Heel Grapple)
Remove and Install Boom (Butt-N-Top Grapple and Road Builder)
Inspect Arm and Boom Pins and Bushings-330LC/370
Group 3360: Hydraulic System
Service Equipment and Tools
Specifications
Remove and Install Hydraulic Filter Restriction Indicator Switch
Remove and Install Hydraulic Pressure Dump Solenoid (If Equipped)
Hydraulic Oil Cleanup Procedure Using Portable Filter Caddy
Remove and Install Pilot Pump-Butt-N-Top Grapple
Remove and Install Pilot Pump-Live Heel Grapple
Remove and Install Reserve Hydraulic Tank (If Equipped)
Remove and Install Proportional Solenoid Valve Manifold
Remove and Install Float and Auxiliary DCV Solenoids-Butt-N-Top Grapple
Remove and Install Grapple Solenoids-Live Heel Grapple
Remove and Install Cab Tilt Solenoids
Disassemble and Assemble Control Valve
Remove and Install Boom Cylinder-330LC/370
Remove and Install Arm Cylinder-330LC/370
Remove and Install Heel Cylinder-330LC/370
Remove and Install Grapple Tilt Cylinder -330LC/370
Disassemble Boom, Arm, or Heel Cylinder-330LC/370
Assemble Boom, Arm, or Heel Cylinder-330LC/370
Remove and Install Cab Tilt Cylinder
Disassemble and Assemble Cab Tilt Cylinder
Section 99: Dealer Fabricated Tools
Group 9900: Dealer Fabricated Tools
DF1063 Lift Bracket
DFT1130 Adapter

John Deere Excavator Logger 330LC, 370 Service Repair Manual Supplement (TM1911)