John Deere Tractors 5070M, 5080M, 5090M, 5100M Repair Service Manual (TM402019)
Catalog:
Model:
Complete service repair manual for John Deere Tractors 5090M, 5100M, 5070M, 5080M, 5090M, 5100M (2WD/MFWD), with all the shop information to maintain, diagnostic, repair, refurbish/rebuild like professional mechanics.
John Deere Tractors 5090M, 5100M, 5070M, 5080M, 5090M, 5100M workshop service repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.
TM402019 English - 5070M, 5080M, 5090M and 5100MTractors Repair.pdf
tm402028 French - Tracteurs5070M, 5080M, 5090M et 5100MRemise en état
tm402029 German - Traktoren5070M, 5080M, 5090M und 5100MReparatur
tm402039 Italian - Riparazionetrattori5070M, 5080M, 5090M e 5100M
tm402067 Swedish - Reparation av traktor5070M, 5080M, 5090Moch 5100M
Total Pages: 1,337 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable, high quality)
Language: English French German Italian Swedish
MAIN SECTIONS
Foreword
Safety
Safety Measures
General Information
Specifications
Tune-Up
Predelivery Inspection
Engine
Removal and Installation of Components
Fuel, Air Intake, Cooling and Exhaust Systems
Removal and Installation of Components
Speed Control Linkage
Fuel System
Air Intake System
Cooling System
Cold-Weather Starting Aids
Exhaust System
Electrical System
Connectors
Alternator
Starting Motor
Electrical Components
Power Train
Removal and Installation of Components
Transmission Shift Controls
Transmission - Reconditioning
SyncReverser™ and PowrReverser™ Transmissions - Clutches
PowrReverser™ Plus Transmission - Clutches
Control Valve
Creeper Transmission
Drive Systems
Removal and Installation of Components
U-Jointed Shafts and Torsion Damper
Front-Wheel Drive Clutch
Differential
Final Drives
Rear PTO
Front PTO
Steering and Brakes
Hydrostatic Steering
Brakes
Hydraulic Trailer Brake
Air Brake System
Hydraulic System
Tandem Pump and Filter
Hydraulic Oil Coolers
Hitch Valve
Valve Block Assembly with M-SCVs
Valve Block Assembly with M-ICVs
Hydraulic Lines
Miscellaneous
Removal and Installation of Components
Front Axle
Three-Point Hitch
Front and Rear Wheels
Trailer Mounting and Swinging Drawbar
Front Loader
Operator`s Cab
Removal and Installation of Components
Air-Conditioning System
Heating System
Seats
Operator`s Cab
Special Tools
Special Tools (Dealer-Fabricated)
Special Tools (Available as Spare Parts)
TABLE OF CONTENTS................1
Section 05: Safety................25
Group 05: Safety Measures................25
Recognize Safety Information................28
”Important” Information................29
”Note” Information................30
Prevent Machine Runaway................31
Handle Fluids Safely—Avoid Fires................32
Prevent Battery Explosions................33
Prepare for Emergencies................34
Prevent Acid Burns................35
Service and Operate Chemical Sprayers Safely................37
Avoid High-Pressure Fluids................39
Service Cooling System Safely................40
Remove Paint Before Welding or Heating................41
Avoid Heating Near Pressurized Fluid Lines................42
Work In Ventilated Area................43
Wear Protective Clothing................44
Practice Safe Maintenance................45
Park Machine Safely................46
Use Proper Lifting Equipment................47
Construct Dealer-Made Tools Safely................48
Support Machine Properly................49
Work in Clean Area................50
Clean Vehicle of Hazardous Pesticides................51
Illuminate Work Area Safely................52
Service Machines Safely................53
Stay Clear of Rotating Drivelines................54
Use Proper Tools................55
Service Tires Safely................56
Service Front-Wheel Drive Tractor Safely................57
Safety Information - Air Brake System................58
Avoid Eye Contact With Radar................59
Keep ROPS Installed Properly................60
Replace Safety Signs................61
Dispose of Waste Properly................62
Live With Safety................63
Safety Measures on Electronic Control Units................64
Section 10: General Information................352
Group 05: Specifications................1076
Engine................70
Transmission................72
Hydraulic System................73
Electrical System................74
Capacities................75
Maximum Lifting Force................76
Ground Travel Speeds................77
Front and Rear Wheels................78
Dimensions and Weights................79
Handling and Storing Diesel Fuel................81
Diesel Fuel................81
Biodiesel Fuel................82
Lubricity of Diesel Fuel................84
Diesel Engine Break-In Oil................85
Diesel Engine Oil................86
Transmission and Hydraulic Oil................88
Front-Wheel Drive Axle Oil................89
Heavy Duty Diesel Engine Coolant................90
Supplemental Coolant Additives................92
Drain Intervals for Diesel Engine Coolant................93
Grease................94
Oil Filters................95
Mixing of Lubricants................96
Lubricant Storage................97
Operating in Warm Temperature Climates................98
Alternative and Synthetic Lubricants................99
Unified Inch Bolt and Screw Torque Values................100
Metric Bolt and Screw Torque Values................102
Hydraulic system inch fitting torques................104
Hydraulic system metric fitting torques................105
Type Plates................107
Product Identification Number................108
Engine Serial Number................109
Transmission Serial Number................110
Front-Wheel Drive Axle Serial Number................111
Group 10: Tune-Up................66
General Information - Tune-Up, Summary of References................114
Using High-Pressure Washers................116
Preliminary Engine Test................117
Preliminary Fuel System Test................118
Clean the Dust Unloading Valve................119
Engine Air Cleaner................120
Clean the Primary Filter Element................121
Clean a Dusty Element................122
Secondary (Safety) Element................123
Check Air Intake System Connections for Leaks................124
Check Crankcase Vent Hose for Clogging................125
Clean the Radiator Grille Screen................126
Keep Radiator Screen Clean................127
Check Caps on Expansion Tank................128
Check the Radiator for Leaks................129
Check Coolant Level................130
Check the Engine Thermostat................131
Check the Operation of the Fuel Transfer Pump................132
Check Fuel Filter................133
Bleed the Fuel System................134
Adjust the Hand Throttle and Accelerator Pedal................196
Clean the Battery, Cables and Battery Box with a Clean Cloth................136
Check the Neutral Start Circuit................137
Check Starting Motor Operation................139
Checking the Lighting Circuit................140
Final Engine Check................141
Tractor Operation Check................142
Group 15: Predelivery Inspection................144
Predelivery Inspection................144
Section 20: Engine................145
Group 00: Removal and Installation of Components................145
Engine - Removal and Installation of Components, Summary of References................147
Engine - Removal and Installation of Components, Special Tools................1075
Engine - Removal and Installation of Components, Specifications................1076
Remove the Engine................150
Install Engine................156
Engine Mounting................162
Section 30: Fuel, Air Intake, Cooling and Exhaust Systems................164
Group 00: Removal and Installation of Components................164
Fuel, Air Intake, Cooling and Exhaust Systems - Removal and Installation of Components, Summary of References................168
Fuel, Air Intake, Cooling and Exhaust Systems - Specifications................1076
Remove Engine Hood................170
Install Engine Hood................172
Remove Battery................174
Install Battery................175
Remove and Install Front Frame................176
Front Frame - Remove Front Section................177
Front Frame - Install Front Section................183
Front Frame - Remove Center Section................188
Front Frame - Install Center Section................190
Front Frame - Remove Hood Carrier................191
Front Frame - Install Hood Carrier................193
Group 05: Speed Control Linkage................164
Speed Control Linkage - Summary of References................195
Adjust the Hand Throttle and Accelerator Pedal................196
Recondition Hand Throttle Lever and Accelerator Pedal................197
Group 10: Fuel System................164
Fuel System - Summary of References................200
Fuel System - General Information................352
Remove Fuel Tank................202
Install Fuel Tank................205
Replace the Fuel Gauge Sending Unit................206
Replace Primary Fuel Filter................210
Replace Fuel Transfer Pump................211
Change the Fuel Filter................213
Replace the Adapter in the Fuel Line................214
Bleed Air from Fuel System................216
Group 15: Air Intake System................164
Air Intake System - Summary of References................218
Air Intake System - General Information................352
Check Dust Unloading Valve................220
Air Cleaner, Removal and Installation................221
Air Intake Hoses, Removal and Installation................223
Replace the Sending Unit for Air Cleaner Restriction Indicator (B02)................224
Remove Charge Air Cooler................225
Install Charge Air Cooler................228
Group 20: Cooling System................165
Cooling System - Summary of References................231
Cooling System - General Information................352
Cooling System - Specifications................1076
Remove the Transmission Oil Cooler................234
Install the Transmission Oil Cooler................237
Remove the Radiator................239
Install the Radiator................242
Change Viscous Clutch of Fan................243
Remove the Thermostat................246
Install the Thermostat................248
Replace Temperature Sensor (B56)................250
Drain Coolant................252
Add Coolant................255
Remove the Expansion Tank................256
Install the Expansion Tank................258
Relieve Tension on Drive Belt................261
Replace Drive Belt................262
Replace the Drive Belt Tensioner................264
Recondition the Fan Console................265
Group 25: Cold-Weather Starting Aids................165
Cold-Weather Starting Aids - Summary of References................269
Fuel Preheater................270
Electrical Starting Aid................271
Coolant Heater................272
Group 30: Exhaust System................165
Exhaust System, Summary of References................275
Exhaust System - General Information................352
Exhaust System - Install Muffler................277
Exhaust System - Exhaust Pipe on Right of Cab Frame................279
Exhaust System - Exhaust Pipe to Top Right................281
Exhaust System - Exhaust Pipe to Bottom Right................283
Section 40: Electrical System................285
Group 05: Connectors................313
Connectors - Summary of References................288
Special Tools................1075
General................290
Using high-pressure washers................291
Disconnecting electrical circuits................353
Strip Wire Ends................293
Installing a Terminal................294
METRI PACK Connectors with Terminal Lock at the Rear................295
METRI PACK Connectors with Terminal Lock at the Front................299
METRI PACK Connectors................313
Connectors for Electronic Control Units................307
Connectors................313
CRIMP SNAP IN Connectors................320
DEUTSCH Connectors................322
Individual Terminals................326
Fuse and Relay Boxes................328
Group 10: Alternator................285
Alternator - Reconditioning (Summary of References)................333
Special Tools................1075
Specifications................1076
Repairing the Alternator................336
Disconnecting Electrical Circuits................347
Relieve Drive Belt Tension................338
Remove/Install the Alternator................339
Pulley Removal and Installation................341
Group 15: Starting Motor................285
Starting Motor - Reconditioning (Summary of References)................344
Specifications................1076
Repairing the Starter Motor................346
Disconnecting Electrical Circuits................347
Remove and Install Starting Motor................348
Group 20: Electrical Components................286
Electrical Components - Reconditioning (Summary of References)................351
General Information................352
Disconnecting electrical circuits................353
Adjusting the Headlights................354
Adjust Lights on the Cab Frame................356
Safety Instructions for Replacing a Halogen Bulb................357
Section 50: Power Train................359
Group 00: Removal and Installation of Components................359
Transmission - Removal and Installation of Components, Summary of References................363
Transmission - Removal and Installation of Components, Specifications................1076
Drain Transmission/Hydraulic Oil................365
Fill System with Transmission/Hydraulic Oil................367
Remove the Transmission Case................369
Install the Transmission Case................372
Group 05: Transmission Shift Controls................359
Transmission Shift Controls - Summary of References................376
Transmission Shift Controls - Specifications................1076
Recondition Clutch Actuation Mechanism................378
SyncReverser™ and PowrReverser™ Transmissions - Recondition the Gear Shift Lever and Range Shift Lever................384
PowrReverser™ Plus Transmission - Recondition the Gear Shift Lever and Range Shift Lever................386
Check and Adjust Gear Shift Lever Detent for Park Position................389
Remove, Inspect and Install Creeper Control Lever and Cable................391
Group 10: Transmission - Reconditioning................359
Transmission - Recondition, Summary of References................394
Transmission - Recondition, Special Tools................1075
Transmission - Recondition, Specifications................1076
Remove the Transmission................397
Install the Transmission................419
Recondition Upper Transmission Shaft................437
Upper Transmission Shaft - Adjust End Play................440
Upper Transmission Shaft - Recondition Gear Shift Unit................441
Recondition the Differential Drive Shaft................443
Differential Drive Shaft - Recondition Range Shift Assembly................447
Differential Drive Shaft - Adjust Cone Point................449
Recondition the Countershaft................451
Countershaft - Adjust End Play................453
Recondition the Mid-Wall................454
Recondition the Transmission Case................458
Park Lock - Recondition the Shift Unit................459
Adjust the Park Lock................462
Group 15: SyncReverser™ and PowrReverser™ Transmissions - Clutches................360
SyncReverser™ and PowrReverser™ Transmissions - Summary of References................472
SyncReverser™ and PowrReverser™ Transmissions - Specifications................1076
SyncReverser™ and PowrReverser™ Transmissions - Remove Clutches and Intermediate Shaft................474
SyncReverser™ and PowrReverser™ Transmissions - Install Clutches and Intermediate Shaft................477
Recondition the Intermediate Shaft................480
Group 20: PowrReverser™ Plus Transmission - Clutches................360
PowrReverser™ Plus Transmission - Clutches, Summary of References................483
PowrReverser™ Plus Transmission - Specifications................1076
PowrReverser™ Plus Transmission - Remove the Clutches................485
PowrReverser™ Plus Transmission - Install the Clutches................488
Remove the Reverse Clutch................491
Recondition the Reverse Clutch................492
Install the Reverse Clutch................494
Remove the Forward Low Clutch................495
Recondition the Forward Low Clutch................496
Install the Forward Low Clutch................498
Remove the Forward High Clutch................499
Recondition the Forward High Clutch................500
Install the Forward High Clutch................502
Recondition the Clutch Pack................503
Group 45: Control Valve................360
Control Valve - Summary of References................509
Control Valve - Specifications................1076
Remove and Install the Control Valve................511
Recondition the Control Valve................515
Group 70: Creeper Transmission................72
Creeper Transmission - Summary of References................520
Creeper Transmission - Other Material................930
Creeper Transmission - Specifications................1076
Remove, Inspect and Install Creeper Transmission................523
Adjust Creeper Lock Using Shims................536
Section 56: Drive Systems................540
Group 00: Removal and Installation of Components................540
Drive Systems - Removal and Installation of Components, Summary of References................544
Drive Systems - Removal and Installation of Components, Special Tools................1075
Drive Systems - Removal and Installation of Components, Specifications................1076
Remove Transmission/Differential Housing................547
Install Transmission/Differential Housing................552
Remove Final Drives................554
Install Final Drives................560
Remove Rear PTO................566
Install Rear PTO................573
Remove Front PTO................580
Install Front PTO................584
Group 05: U-Jointed Shafts and Torsion Damper................540
U-Jointed Shafts and Torsion Damper - Summary of References................591
U-Jointed Shafts and Torsion Damper - Special Tools................1075
U-Jointed Shafts and Torsion Damper - Specifications................1076
Remove Front-Wheel Drive U.j. Shaft................594
Install Front-Wheel Drive U.j. Shaft................596
Disassemble Front-Wheel Drive U.j. Shaft................598
Assemble Front-Wheel Drive U.j. Shaft................600
Remove Engine U.J. Shaft................603
Install Engine U.J. Shaft................605
Remove Torsion Damper................607
Install Torsion Damper................608
Change Torsion Damper Bearings................609
Group 10: Front-Wheel Drive Clutch................540
Front-Wheel Drive Clutch - Summary of References................612
Remove Front-Wheel Drive Clutch................613
Install Front-Wheel Drive Clutch................614
Front-Wheel Drive Clutch - Change Transmission Ratio................615
Recondition Front-Wheel Drive Idler Shaft................617
Recondition Front-Wheel Drive Output Shaft................619
Front-Wheel Drive - Recondition the Fast Dump Valve................621
Group 15: Differential................541
Differential - Summary of References................624
Differential - Special Tools................1075
Differential - Service Equipment and Tools................626
Differential - Other Material................930
Differential - Specifications................1076
Remove the Differential................629
Install the Differential................631
Recondition Differential................633
Differential - Adjust Backlash................635
Group 25: Final Drives................541
Final Drives - Summary of References................638
Final Drives - Special Tools................1075
Final Drives - Other Material................930
Final Drives - Specifications................1076
Final Drives - Exploded View................642
Final Drives - Remove Planetary Carrier................644
Final Drives - Recondition Planetary Carrier................646
Final Drives - Install Planetary Carrier................649
Disassemble Final Drives................652
Assemble Final Drives................654
Group 30: Rear PTO................541
Rear PTO - Reconditioning, Summary of References................658
Rear PTO - Special Tools................1075
Rear PTO - Other Material................930
Rear PTO - Specifications................1076
Rear PTO - Recondition PTO Clutch................662
Rear PTO - Remove Countershaft and Output Shaft................664
Rear PTO - Recondition Countershaft and Output Shaft 540/540E rpm................665
Rear PTO - Recondition Countershaft and Output Shaft 540/540E/1000 rpm................668
Rear PTO - Recondition Countershaft and Output Shaft, 540/540E/Ground Drive PTO................671
Rear PTO - Recondition Drive Shaft of Ground Drive PTO................674
Rear PTO - Install Countershaft and Output Shaft................677
Rear PTO - Change Bowden Cable................680
Rear PTO - Adjust PTO Control................682
Group 35: Front PTO................542
Front PTO - Summary of References................685
Front PTO - Specifications................1076
Front PTO - General Repair Procedures................687
Front PTO - Clean Oil Screen................688
Front PTO - Replace Solenoid Valve (Y01)................690
Front PTO - Remove Oil Pump................691
Front PTO - Exploded View of Oil Pump................693
Front PTO - Install Oil Pump................694
Front PTO - Sectional View................696
Disassemble Front PTO................698
Assemble Front PTO................702
Front PTO - Disassemble Clutch................706
Front PTO - Assemble Clutch................709
Front PTO - Remove Constant-Velocity Joint from Drive Shaft................712
Front PTO - Install Constant-Velocity Joint on Drive Shaft................714
Front PTO - Remove Oil Cooler................716
Front PTO - Install Oil Cooler................718
Section 60: Steering and Brakes................720
Group 05: Hydrostatic Steering................720
Steering - Summary of References................723
Steering, Special Tools................1075
Steering, Other Material................930
Steering, Specifications................1076
Disconnect/Connect Steering or Brake Hoses................727
Remove and Install the Steering Valve................729
Remove and Install the Steering Column................732
Remove and Install the Steering Cylinder on Front Axle................734
Recondition the Steering Cylinder on Front Axle................736
Recondition the Tie-Rods on Front Axle................738
Recondition the Steering Lines................740
Group 10: Brakes................720
Brakes - Summary of References................744
Brakes, Special Tools................1075
Brakes, Specifications................1076
Remove and Install Brake Valve and Brake Pedals................747
Recondition the Brake Valve................751
Brake Valve, Sectional View................753
Assemble the Brake Valve................755
Remove Rear Brakes................759
Install Rear Brakes................762
Remove Park Brake................766
Install Park Brake................769
Check and Adjust Park Brake................772
Group 30: Hydraulic Trailer Brake................720
Hydraulic Trailer Brake - Summary of References................774
Hydraulic Trailer Brake - Specifications................1076
Hydraulic Trailer Brake - Instructions on Repair................776
Hydraulic Trailer Brake - Change Trailer Brake Valve................777
Hydraulic Trailer Brake - Change the Pilot Valve................778
Bleed Air from the Hydraulic Trailer Brake Valve................779
Check Hydraulic Trailer Brake Valve................780
Group 35: Air Brake System................721
Air Brake System - Summary of References................782
Air Brake System, Specifications................1076
Safety Information When Working on the Air Brake System................784
Air Brake System, Screw Union Installation................785
Change Compressor................786
Gasket Set for Air Compressor................790
Gasket Set for Air Compressor................790
Change Compressed Air Tank................792
Change Pressure Control Valve................793
Change Trailer Control Valve................794
Change Coupling Ends................796
Air Brake Test Procedure................797
Section 70: Hydraulic System................798
Group 05: Tandem Pump and Filter................798
Tandem Pump and Filter - Summary of References................801
Tandem Pump and Filter - Service Equipment and Tools................802
Tandem Pump and Filter - Specifications................1076
Remove and Install Tandem Pump................804
Fittings and Attachments of Tandem Pump................807
Disassemble, Inspect and Assemble Tandem Pump................809
Remove and Install Hydraulic Oil Filter and Manifold................812
Disassemble and Check Hydraulic Oil Manifold................814
Assemble Hydraulic Oil Manifold................816
Group 10: Hydraulic Oil Coolers................798
Remove and Install Hydraulic Oil Coolers................823
Group 15: Hitch Valve................798
Hitch Valve - Other Material................930
Hitch Valve - Specifications................1076
Inspect and Repair Control Levers and Cables - Mechanical Hitch................829
Inspect and Repair Mechanical Hitch Valve Control................833
Inspect and Recondition Hitch Control Linkage - Mechanical Hitch................836
Remove and Install Hitch Valve - Mechanical Hitch................840
Remove and Install Hitch Valve - Electro-Hydraulic Hitch................843
Replace/Adjust Main Relief Valve - Mechanical Hitch................846
Replace Relief Valve - Mechanical Hitch................848
Remove, Inspect and Install Rate-of-Drop Valve - Mechanical Hitch................850
Remove, Inspect and Install Rate-of-Drop Valve - Electro-Hydraulic Hitch................854
Recondition Hitch Valve - Electro-Hydraulic Hitch................856
Hitch Valve, Exploded View - Electro-Hydraulic Hitch................863
Recondition Hitch Valve - Mechanical Hitch................866
Hitch Valve, Exploded View - Mechanical Hitch................870
Inspect and Recondition Draft Control - Mechanical Hitch................872
Inspect and Recondition Draft Sensor - Electro-Hydraulic Hitch................877
Remove, Inspect and Install Lift Arms................881
Remove, Inspect and Install Lift Cylinders................886
Adjust Draft and Position Control Cables................888
Adjust Hitch Position Control Linkage................890
Adjust Draft Control Bowden Cable................892
Group 20: Valve Block Assembly with M-SCVs................799
Other Material................930
Specifications................1076
Inspect and Recondition SCV Levers and Linkage - Tractors with Cab................896
Remove and Install Valve Block with Two or Three SCVs................899
Disassemble, Inspect and Assemble Valve Block with Two SCVs................903
Sectional View, Valve Block with Three SCVs................911
Disassemble, Inspect and Assemble Valve Block with Three SCVs................913
Adjust Cables for M-SCVs................928
Group 25: Valve Block Assembly with M-ICVs................799
Other Material................930
Specifications................1076
Inspect and Repair Multifunction Lever and Linkage................932
Remove and Install Valve Block with ICVs................937
Disassemble, Inspect and Assemble Valve Block with Two ICVs................941
Disassemble, Inspect and Assemble Valve Block with Three ICVs................948
Adjust Cables for M-ICVs................958
Group 30: Hydraulic Lines................799
Specifications................1076
Inspect and Replace Hydraulic Lines................961
Section 80: Miscellaneous................965
Group 00: Removal and Installation of Components................965
Miscellaneous - Removal and Installation of Components, Summary of References................968
Miscellaneous - Removal and Installation of Components, Special Tools................1075
Miscellaneous - Removal and Installation of Components, Specifications................1076
Remove and Install the Front Axle or Front-Wheel Drive Axle - Summary of References................971
Remove the Front Axle................972
Install the Front Axle................975
Remove the Front-Wheel Drive Axle................978
Install the Front-Wheel Drive Axle................981
Remove the Front Axle Support................982
Install the Front Axle Support................989
Check and Adjust Toe-In................991
Group 05: Front Axle................965
Front Axle - Recondition, Summary of References................993
Front Axle - Recondition, Special Tools................1075
Front Axle - Recondition, Specifications................1076
Front Axle - Check and Replace the Pivot Pin................996
Front Axle - Remove and Install the Knuckle and Spindle Assembly................997
Front Axle - Check and Replace the Shaft of the Knuckle and Spindle Assembly................1000
Front Axle - Check and Replace Wheel Bearings................1001
Front Axle - Check and Adjust Toe-in................1003
Group 10: Three-Point Hitch................965
Three-Point Hitch - Summary of References................1006
Three-Point Hitch - Specifications................1076
Remove the Three-Point Hitch................1008
Install the Draft Links................1011
Install the Lift Links................1015
Group 15: Front and Rear Wheels................78
Front Wheels, Rear Wheels and Fenders - Recondition, Summary of References................1020
Front Wheels, Rear Wheels and Fenders - Special Tools................1075
Front Wheels, Rear Wheels and Fenders - Specifications................1076
Remove the Front and Rear Wheels................1023
Recondition the Front and Rear Wheels................1026
Install the Front and Rear Wheels................1027
Pivoting (Front) Fender................1029
Group 20: Trailer Mounting and Swinging Drawbar................1062
Trailer Mounting and Swinging Drawbar - Reconditioning, Summary of References................1033
Trailer Mounting and Swinging Drawbar - Reconditioning, Specifications................1076
Check the Manually-Operated Trailer Hitch for Wear................1035
Checking the Manually-Operated Hitch for Wear (Italy and Spain Only)................1039
Check Remote Controlled Trailer Hitch for Wear................1041
Checking the Tow-Hook for Wear................1046
Check the Swinging Drawbar for Wear................1047
Install the Center Link Support................1048
Guide Rails for Height-Adjustable Trailer Hitch................1050
Repair of Automatic Trailer Hitch................1051
Remote Control for Automatic Trailer Hitch................1058
Swinging Drawbar................1062
Proper Use of Drawbar................1065
Group 50: Front Loader................966
Remove and Install the Mountings................1068
Section 90: Operator's Cab................1070
Group 00: Removal and Installation of Components................1070
Operator's Cab, Removal and Installation of Components - Summary of References................1074
Special Tools................1075
Specifications................1076
Operator's Cab, Tilt or Remove and Install - Summary of References................1077
Tilt Operator's Cab Upward................1078
Tilt Operator’s Cab Downward................1096
Remove Operator’s Cab................1100
Install Operator's Cab................1109
Check and Adjust Shift Units................1112
Group 10: Air-Conditioning System................1070
Air-Conditioning System - Summary of References................1114
Air-Conditioning System - Special Tools................1115
Air-Conditioning System - Specifications................1116
Torques for Tightening Refrigerant Hoses................1117
Air-Conditioning System - Safety at Work................1118
Storage of Refrigerant Containers................1120
Air-Conditioning - Important................1121
Service Work on Air-Conditioning System................1122
Fill with Refrigerant Oil................1125
Instructions for Starting Up the DENSO Air-Conditioning Compressor................1127
Remove and Install Compressor................1128
Checking Level in the Compressor................1130
Disassemble Compressor Clutch................1131
Checking Clutch Hub Clearance................1133
Checking the Compressor Manifold................1134
Remove and Install the Condenser................1135
Remove and Install the Receiver-Drier................1137
Remove and Install the Evaporator with Expansion Valve................1138
Arrangement of Condensation Water Drain Hoses................1141
Remove and Install Thermostat Switch................1142
Adjust Thermostat Switch Bowden Cable................1143
Remove and Install the High/Low Pressure Switch................1144
Group 15: Heating System................1071
Heating System (Summary of References)................1146
Remove and Install Radiator................1147
Remove and Install Fan Motors................1148
Remove and Install Fan Motor Resistors................1149
Remove and Install Heater Valve................1150
Adjust Heater Valve Bowden Cable................1151
Remove and Install Control Console for Ventilation System................1152
Change Air Hoses in Ventilation System................1155
Group 20: Seats................1071
Seats - Summary of References................1158
Seats - Specifications................1159
Seats - Special Tools, Summary of References................1160
Remove the Operator's Seat................1161
Install the Operator's Seat................1162
Comfort Seat MSG83................1163
Air Comfort Seat MSG93................1177
Air Comfort Seat MSG95 - Remove and Install the Compressor................1178
Air Comfort Seat MSG95 - Remove and Install the Air Spring................1184
Air Comfort Seat MSG95, Check and Adjust the Height-Adjustment Bowden Cables and Lever................1186
Air Comfort Seat MSG95, Remove and Install the Height-Adjustment Bowden Cables and Lever................1189
Air Comfort Seat MSG95 - Adjust the Level Control (Micro-Switch, Vent Valve)................1191
Air Comfort Seat MSG95 - Remove and Install the Level Control with Height Stop................1193
Air Comfort Seat MSG95 - Remove and Install the Compressed-Air Hoses (Hoses with Quick-Coupling System)................1196
Air Comfort Seat MSG95 - Remove and Install the Compressed-Air Hoses (Hose System with Clamps)................1201
Air Comfort Seat MSG95 - Remove and Install the Air Tank with Additional Capacity................1207
Passenger Seat, Exploded View................1210
Group 25: Operator's Cab................1071
Operator's Cab - Summary of References................1214
Cab Mounting Torques................1215
Remove and Install Windshield................1216
Remove and Install Lower Front Windows................1219
Remove and Install Lower Rear Window................1221
Remove and Install Upper Rear Window................1222
Remove and Install Side Windows................1223
Remove and Install Cab Doors................1225
Remove and Install Sun Roof................1228
Installing Door Lock................1229
Remove and Install Panels on Steering Column................1231
Remove Trim Panels from Switch Console................1234
Install Trim Panels from Shift Console................1236
Remove and Install Shift Console................1238
Remove and Install Left Inner Trim................1242
Remove Inner Roof Trim................1243
Install Inner Roof Trim................1248
Section 99: Special Tools................1253
Group 05: Special Tools (Dealer-Fabricated)................1253
DFLX8 - Thrust Pieces................1258
DFLX38 - Turning Device................1259
DFT1162—Snap Ring Removal Tool................1260
Group 10: Special Tools (Available as Spare Parts)................1253
AR52361 - Socket................1263
D01019AA - Manually-Operated Hydraulic Pump................1264
D01042AA – Load-Positioning Sling................1265
D01045AA - Bushing, Bearing and Seal Driver Set................1266
FKM10002 or JT05470 - Pressure Test Kit................1267
FKM10409 - Battery Tester................1268
FKM10427 - Crimping Pliers................1269
FKM10444 - Leak Detector................1270
FKM10445 - Universal Pressure Test Kit................1271
FKM10455 - Extraction Tool................1272
FKM10456 - Extraction Tool................1273
FKM10457 - Extraction Tool................1274
FKM10461 - Wiring Harness Repair Kit................1275
FKM10469 - Crimping Pliers................1276
FKM10470 - Pressure Measuring System (Stage 1)................1277
FKM10471 - Pressure Measuring System (Stage 2)................1278
FKM10472 - Flow Measurement System................1279
FKM10472-4 - Temperature Sensor................1280
FKM10482 - Pressure Test Kit................1281
JDE83 – Flywheel Turning Tool................1282
JDG19 – Special Mounting Brackets................1283
JDG23 – Lifting Sling................1284
JDG359 - Electrical Repair Tool Kit................1285
JDG360 - DEUTSCH Crimping Pliers................1286
JDG361 - Extraction Tool................1287
JDG362 - Extraction Tool................1288
JDG364 - Extraction Tool................1289
JDG708 - AMP Crimping Tool................1290
JDG749 - 1,30 m (52 in.) Torque wrench extension................1291
JDG750 – Swivel Socket................1292
JDG765 - Bushing Installer................1293
JDG772 - Planetary Installation Tool................1294
JDG775 - Seal Installer................1295
JDG776 - Extraction Tool................1297
JDG776 - Extraction Tool................1297
JDG777 - Extraction Tool................1298
JDG783 - Crimping Pliers................1299
JDG785 - Extraction Tool................1300
JDG839 - Adapter................1301
JDG1369 - Terminal Extraction Tool................1302
JDG1725 - Extraction Tool................1303
JDG1727 - Crimping Pliers................1304
JDG1744 - Electrical Repair Tool Kit................1305
JDG10974EU - Air-Conditioning Service Unit................1306
JDH43A - Tester for Pressure-Relief Valves................1307
JT02043 - Support Stand................1308
JT02044 - Support Stand................1309
JT02153 - Clamp-On Current Probe................1310
JT03248 - Fitting................1311
JT05470 / FKM10002 - Universal Pressure Test Kit................1312
JT05472 - Pressure Gauge................1313
JT05480 - Diagnostic Receptacle (M14 x 1.5M ORB x 1/2 Quick Coupler)................1314
JT05723 – Medium-Duty Rear Tractor Splitting Stand................1315
JT05724 – Medium-Duty Front Tractor Splitting Stand................1316
JT05725 – Universal Support Stand................1317
JT05791A - Multimeter................1318
JT07115 - Pressure Test Kit................1319
JT07211 - Support Stand................1320
JT07212 - Diagnostic Adapter Kit................1321
JDG10940 - Adapter for Checking Park Lock Detent................1322
KJD10128 - Fitting................1323
KJD10169B - Special Puller................1324
KJD10169-5 - Threaded Spindle................1325
KJD10194 - Pressure Test Kit................1326
KJD10227 - Special Tool................1327
KJD10278 - Special Tool................1328
KJD10283 - Supplementary Kit................1329
KJD10292 - Diagnostic Harness................1330
KJD10293 – Disconnecting Tool................1331
KJD10352 - Restriction Fitting................1332
KJD10388 - Assembly fixture................1333
KJD10426 - Special Tool................1334
KJD10495 - Hose Connector................1335
KJD10501 - Disconnecting Tools (Kit)................1336
KJD10529 - Cutting Tool................1337
KJD10530 - Pliers................1338
KJD10557 - Cab Tilting Device................1339
KJD10559 - Support Stand for Front Axle and Final Drives................1340
KJD10560 - Adapter for TLS Front Axle (Used in Conjunction with Support Stand KJD10559)................1342
KJD10561 - Bracket for Lift Post (5020, 5R and 5M)................1343
KJD10562 - Tilt Joint Kit (5020, 5R and 5M)................1344
KJD10570 - Safety Equipment (Air-Conditioning Service)................1345
KJD10571 - Protective Cover for Air-Conditioning Service Unit................1346
KJD10572 - Standard Flushing Kit (Air-Conditioning Service)................1347
KJD10573 - UV Contrast Agent (Air-Conditioning Service)................1348
KJD10574 - Hose Extensions (2.5 m) (Air-Conditioning Service)................1349
KJD10575 - PAG Oil (Air-Conditioning Service)................1350
KJD10576UV - Lamp and Safety Goggles (Air-Conditioning Service)................1351
KJD10577 - Filter/Receiver-Drier Cartridge for Air-Conditioning Service Unit................1352
KML10005 - Spring Compressor................1353
KLM10019-1 - Crimping Pliers................1354
KLM10019-4 - Extraction Tool................1355
OTC7062A - Holder................1356
R83489 - Adapter available as spare part................1256
RE200689 - Performance Monitor................1358
RE37996 - Adjusting Tool................1359
John Deere Tractors 5070M, 5080M, 5090M, 5100M Repair Service Manual (TM402019)