Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Subaru BRZ 2013-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Subaru BRZ 2013-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: Subaru
MODEL: BRZ (a.k.a. Toyota GT/FT 86, Scion FR-S)
YEAR: 2013 2014 2015 2016
FORMAT: PDF

EXCERPT:
Manual transmission/transaxle - MANUAL TRANSMISSION ASSY

Use recommended or substitute products for manual transmission oil. (Refer to PP-8)
DISASSEMBLY
1. Remove the manual transmission filler plug.
(1) Remove the manual transmission filler plug and gasket.
2. Remove the manual transmission drain plug.
(1) Remove the manual transmission drain plug and gasket.
3. Remove the clutch release fork support.
(1) Remove the clutch release fork support from the clutch housing.
4. Remove the back-up light switch ASSY.
(1) Release the engagement of the three clamps.
(2) Remove the back-up light switch ASSY and gasket.
5. Remove the neutral switch.
(1) Release the engagement of the clamp.
(2) Remove the neutral switch and gasket.
6. Remove the wiring harness clamp bracket.
(1) Remove the bolt, and remove the wiring harness clamp bracket.
7. Remove the lock ball pin.
(1) Remove the head straight screw plug, compression spring and lock ball pin.
8. Remove the holder.
(1) Remove the holder, compression spring and lock ball pin.
9. Remove the transmission extension housing SUB-ASSY (MTM).
(1) Remove the bolt.
(2) Remove the eight bolts and clamp.
Captions in illustration
(3) Remove the transmission extension housing SUB-ASSY (MTM).

• Be careful not to damage the transmission extension housing
SUB-ASSY (MTM).
• Make sure to remove the transmission extension housing SUBASSY
(MTM) with the shift position in neutral.
10. Remove the extension housing rear oil seal.
(1) Remove the extension housing rear oil seal.
Captions in illustration

Be careful not to damage the transmission extension housing SUBASSY
(MTM).

When removing the part, apply a cloth to avoid damaging the
transmission extension housing SUB-ASSY (MTM).
11. Remove the extension housing dust deflector.
(1) Remove the extension housing dust deflector.
12. Remove the transmission extension housing oil seal.
(1) Remove the transmission extension housing oil seal.
Captions in illustration

Be careful not to damage the transmission extension housing SUBASSY
(MTM).

When removing the part, apply a cloth to avoid damaging the transmission extension housing SUB-ASSY (MTM).
13. Remove the extension housing oil receiver pipe No. 2.
(1) Remove the extension housing oil receiver pipe No. 2.
14. Remove the extension housing oil receiver pipe No. 1.
(1) Remove the bolt, and remove the extension housing oil receiver pipe No. 1 and stopper plate.
...