Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 2006-2008 Isuzu i-280, i-290, i-350, i-370 (i-280 S, i-280 LS, i-290 S, i-290 LS, i-350 LS, i-370 LS). Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2006-2008 Isuzu i-280, i-290, i-350, i-370 (i-280 S, i-280 LS, i-290 S, i-290 LS, i-350 LS, i-370 LS) is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2008 ENGINE Engine Mechanical - 2.9L - Canyon, Colorado & i290
OIL LEVEL INDICATOR AND TUBE REMOVAL
Fig. 335: View Of Oil Level Indicator Tube
1. Remove the oil level indicator.
2. Remove the oil level indicator tube bolt.
3. Remove the oil level indicator tube.
EXHAUST MANIFOLD REMOVAL
Fig. 336: Exhaust Manifold Heat Shield And Nuts
1. Remove the exhaust manifold heat shield nuts.
2. Remove the exhaust manifold heat shield.
Fig. 337: Exhaust Manifold Studs
3. Remove the exhaust manifold studs. (if needed)
Fig. 338: Exhaust Manifold And Bolts
4. Remove the exhaust manifold bolts.
5. Remove the exhaust manifold.
Fig. 339: View Of Exhaust Manifold Gasket
6. Remove and discard exhaust manifold gasket.
OIL FILTER ADAPTER REMOVAL
Fig. 340: View Of Oil Filter Adapter
1. Remove the oil filter adapter.
Fig. 341: View Of Oil Filter Bypass Valve
2. Remove the oil filter bypass valve.
HEATER INLET PIPE REMOVAL
Fig. 342: View Of Heater Inlet Pipe
1. Remove the heater inlet pipe bolt.
2. Remove the heater inlet pipe.
HEATER OUTLET HOSE FITTING REMOVAL
Fig. 343: View Of Heater Outlet Hose Fitting
Remove the heater outlet hose fitting.
WATER OUTLET REMOVAL
Fig. 344: View Of Water Outlet
1. Remove the water outlet bolts.
2. Remove the water outlet.
WATER PUMP REMOVAL
Tool Required
J 41240 Pulley Holding Tool
Removal
Fig. 345: View Of Water Pump Pulley, Bolts & J 41240
1. Install J 41240 to hold the pulley.
2. Remove the water pump pulley bolts.
3. Remove J 41240 .
4. Remove the water pump pulley
Fig. 346: View Of Water Pump, Gasket & Bolts
5. Remove the water pump bolts.
6. Remove the water pump.
7. Remove and discard the water pump gasket.
...