Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1983-2005 GMC Jimmy, Jimmy K1500, Jimmy Typhoon, Jimmy V1500, S15 Jimmy, S15 Pickup. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for GMC Jimmy 1983-2005 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2005 ENGINE Engine Mechanical - 4.3L - Blazer & Jimmy Canadian
Remote Oil Filter Adapter Pipe Replacement
Removal Procedure
Fig. 259: View Of Remote Oil Filter Inlet & Outlet Hose Clip Bolt
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the steering linkage shield, if equipped. Refer to Steering Linkage Shield Replacement in Steering Linkage (Non-Rack and Pinion).
3. Position a suitable drain pan for the engine oil to drain into when the hoses are removed.
4. Remove the remote oil filter inlet and outlet hose clip bolt from the oil pan.
Fig. 260: View Of Remote Oil Filter Inlet & Outlet Hoses To Remote Oil Filter Adapter
5. Remove the bolt attaching the remote oil filter inlet and outlet hoses to the remote oil filter adapter.
6. Remove the remote oil filter inlet and outlet hoses and the seals from the remote oil filter adapter.
7. Discard the remote oil filter inlet and outlet hose seals.
Fig. 261: View Of Remote Oil Filter Inlet & Outlet Hoses To Remote Oil Filter Pipe Adapter
8. Remove the bolt attaching the remote oil filter inlet and outlet hoses to the oil filter pipe adapter.
9. Remove the remote oil filter inlet and outlet hoses.
10. Remove and discard the remote oil filter inlet and outlet hose seals.
11. Clean and inspect the remote engine oil filter inlet and outlet hoses and fittings.
Installation Procedure
Fig. 262: Locating Seals
1. Install NEW seals on both ends of the remote oil filter inlet and outlet hoses.
Fig. 263: View Of Remote Oil Filter Inlet & Outlet Hoses To Remote Oil Filter Pipe Adapter
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the remote oil filter inlet and outlet hoses and the bolt to the oil filter pipe adapter.
Tighten: Tighten the remote oil filter inlet and outlet hose to remote oil filter pipe adapter bolt to 35 N.m (26 lb ft).
Fig. 264: View Of Remote Oil Filter Inlet & Outlet Hoses To Remote Oil Filter Adapter
3. Install the remote oil filter inlet and outlet hoses to the remote oil filter adapter.
Tighten: Tighten the remote oil filter inlet and outlet hose to the remote oil filter adapter bolt to 35 N.m (26 lb ft).
Fig. 265: View Of Remote Oil Filter Inlet & Outlet Hose Clip Bolt
4. Install the remote oil filter inlet and outlet clip and bolt to the oil pan.
Tighten: Tighten the remote oil filter inlet and outlet hose clip bolt to 10 N.m (89 lb in).
5. Install the steering linkage shield, if equipped. Refer to Steering Linkage Shield Replacement in Steering Linkage (Non-Rack and Pinion).
6. Lower the vehicle.
7. Operate the engine and check for leaks.
8. Inspect the engine oil level and fill to the proper level.
...