Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Kobelco SK200-V, SK200-VI, SK200-6E, SK200-8, SK200SR, SK200SR-1S, SK200SRLC, SK200LC-V, SK200LC-VI, SK200LC-6E, SK200SRLC-1S, SK210-VI, SK210-6E, SK210-6ES, SK210LC-VI, SK210LC-6E, SK210LC-6ES, SK210LC-8, SK210NLC-VI, SK210NLC-6ES Crawler Excavators. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your excavators like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

“SK200SR(-1S),SK200SRLC(-1S) (S5YB0003E).pdf”
Kobelco SK200SR, SK200SR-1S, SK200SRLC, SK200SRLC-1S Crawler Excavators Shop Manual; 980 pages

“SK200SR,SK200SRLC (S5YB0002E).pdf”
Kobelco SK200SR, SK200SRLC Crawler Excavators Shop Manual; 994 pages

“SK200SR,SK200SRLC (S5YB0001E).pdf”
Kobelco SK200SR, SK200SRLC Crawler Excavators Shop Manual; 952 pages

“SK200(LC)-VI,SK210(LC)-VI,SK210NLC-VI (S5YN0012E).pdf”
Kobelco SK200-VI, SK200LC-VI, SK210-VI, SK210LC-VI, SK210NLC-VI Crawler Excavators Shop Manual; 1,054 pages

“SK200(LC)-6E,SK210(LC)-6E(S),SK210NLC-6ES (S5YN0017E).pdf”
Kobelco SK200-6E, SK200LC-6E, SK210-6E, SK210-6ES, SK210LC-6E, SK210LC-6ES, SK210NLC-6ES Crawler Excavators Shop Manual; 1,022 pages

“SK200(LC)-6E,SK210(LC)-6E,SK210NLC-6E (S5YN0014E).pdf”
Kobelco SK200-6E, SK200LC-6E, SK210-6E, SK210LC-6E, SK210NLC-6E Crawler Excavators Shop Manual; 1,042 pages

“SK200-V,SK200LC-V (S5YN0008E).pdf”
Kobelco SK200-V, SK200LC-V Crawler Excavators Shop Manual; 880 pages

“SK200-8,SK210LC-8 (SSYN0018E01).pdf”
Kobelco SK200-8, SK210LC-8 Crawler Excavators Shop Manual; 1,082 pages

EXCERPT:

INDEX
1 SPECIFICATION SECTION
2 MAINTENANCE SECTION
3 SYSTEM SECTION
4 DISASSEMBLY SECTION
5 TROUBLESHOOTING
6 ENGINE SECTION
7 INSTALLATION PROCEDURES FOR OPTIONAL ATTACHMENT

6. FUEL TANK
6.1 PREPARATION FOR REMOVAL
(1) Draining fuel.
1) Unlock cap (A2) with a starter key and open it.
2) Loosen cock (BS) under the tank. (See Fig.6-2.)
3) Draining fuel
Capacity of tank : 335e (89gal)
(2) Remove stay (29) and guard (8). (Refer to 4. GUARD)
(3) Remove the connector for level sensor (B4). (See Fig. 6-2)
( 4) Remove fuel hose
1) Loosen clip (AS) and draw out hoses (2) and (5).
2) Put in plugs that match the hose bore.
6.2 REMOVAL
1) Remove four capscrews (B1) M16 X 40 and three shims (B3).
• :24mm
2) Hook the wire to the lifting eye on the fuel tank assy (A1) and remove the fuel tank.
Weight: 91kg (20llbs)
6.3 INSTALLATION
(1) Installing is done m the reverse order of removing.

7. HYDRAULIC TANK
7.1 PREPARATION FOR REMOVAL
(1) Remove panel assy (4), guard (12) and other guards necessary to remove the hydraulic oil tank. (Refer to 4. GUARDS.)
(2) Bleeding internal air of tank (A3) Press the rubber cap by your finger tip to bleed off the inside air.
A Keep pressing until the hissing stops.
(3) Remove cover (AS-3).
1) Remove six capscrews (AS-6) M10X20.
• : 17mm
2) Remove cover (AS-3).
3) Remove suction strainer (A9).
(4) Remove cover (AS-4).
1) Remove six capscrews (AS-6) M10X20.
• : 17mm
2) Remove cover (AS-4).
3) Remove filter element (B6-1).
(5) Turn the handlie of element assy. (B), and disassemble the removed filter element (B6-1).
Disassemble parts : (B), (C), (D), (E), (F)
...