Complete workshop service manual with electrical wiring diagrams for 1995-1998 Honda CBR600F3 Motorcycle. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:

FRONT WHEEL/SUSPENSION/STEERING
Install the clutch lever bracket and holder with the "UP" mark lacing up.
Align the end of the clutch lever bracket with the punch mark on the handlebar and tighten the upper bolt first, then tighten the lower bolt.
Connect the clutch switch connectors.
FRONT WHEEL
REMOVAL
Raise and support the motorcycle using a hoist.
Loosen the right axle pinch bolts.
Remove the axle bolt.
Remove the left brake caliper bracket bolts and the left caliper.
CAUTION: Do not suspend the brake caliper from the brake hose. Do not twist the brake hose.
NOTE: Do not operate the front brake lever after removing the caliper and front wheel To do so will cause difficulty in fitting the brake disc between the brake pads.
Loosen the left axle pinch bolts, pull the axle out.
Remove the front wheel
CAUTION: When removing the wheel, slide the right brake caliper out so that the wheel rim clears.
...