Complete Technical Repair Manual for John Deere 135G Excavators. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

John Deere 135G Excavator Technical Repair Manual is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

TM12669 - John Deere 135G Excavator Technical Repair Manual.pdf
tm12671 - John Deere Excavadora 135G.pdf
tm12670 - John Deere Excavatrice 135G.pdf

Category: Repair
Language: Spanish English French

EXCERPT:
11. Repair or replace parts as necessary.
12. IMPORTANT:
Prevent possible muffler filter damage. Gasket (20) is not reusable and must be replaced.
Install new gasket (20) and DPF (19).
13. Install mounting brackets (18), cap screws (17), and nuts (16).
14. Install bracket (15), cap screws (13), and nuts (14).
15. Tighten nuts (14 and 16) to specification.
16. IMPORTANT:
Prevent possible exhaust filter damage. Gasket (11) is not reusable and must be replaced.
Install new gasket (11) and muffler (10).
17. Install cap screws (8) and nuts (9).
18. Install mounting brackets (7), cap screws (6), and nuts (5).
19. Install bracket (4), cap screws (3), and nuts (2).
20. Tighten nuts (2, 5, and 9) to specification.
...

Table of Contents
tm12669 - 135G Excavator...0
Table of Contents...0
  Foreword...0
  Technical Information Feedback Form...0
  Section 00: General Information...0
    Group 0001: Safety...0
      Recognize Safety Information...0
      Follow Safety Instructions...0
      Operate Only If Qualified...0
      Wear Protective Equipment...0
      Avoid Unauthorized Machine Modifications...0
      Control Pattern Selector—If Equipped...0
      Add Cab Guarding for Special Uses...0
      Inspect Machine...0
      Stay Clear of Moving Parts...0
      Avoid High-Pressure Fluids...0
      Avoid High-Pressure Oils...0
      Work In Ventilated Area...0
      Prevent Fires...0
      Prevent Battery Explosions...0
      Handle Chemical Products Safely...0
      Decommissioning — Proper Recycling and Disposal of Fluids and Components...0
      Exhaust Filter Ash Handling and Disposal...0
      Prepare for Emergencies...0
      Clean Debris from Machine...0
      Use Steps and Handholds Correctly...0
      Start Only From Operator's Seat...0
      Use and Maintain Seat Belt...0
      Prevent Unintended Machine Movement...0
      Avoid Work Site Hazards...0
      Keep Riders Off Machine...0
      Avoid Backover Accidents...0
      Inspect and Maintain ROPS...0
      Avoid Machine Tip Over...0
      Use Special Care When Lifting Objects...0
      Add and Operate Attachments Safely...0
      Park and Prepare for Service Safely...0
      Service Cooling System Safely...0
      Remove Paint Before Welding or Heating...0
      Make Welding Repairs Safely...0
      Drive Metal Pins Safely...0
      Clean Exhaust Filter Safely...0
    Group 0003: Torque Values...0
      Metric Bolt and Cap Screw Torque Values...0
      Additional Metric Cap Screw Torque Values...0
      Unified Inch Bolt and Cap Screw Torque Values...0
      Service Recommendations for 37° Flare and 30° Cone Seat Connectors...0
      Service Recommendations for O-Ring Boss Fittings...0
      Service Recommendations For Flared Connections—Straight or Tapered Threads...0
      Service Recommendations For Flat Face O-Ring Seal Fittings...0
      O-Ring Boss Fittings In Aluminum Housing Service Recommendations—Excavators...0
      O-Ring Face Seal Fittings With SAE Inch Hex Nut And Stud End For High Pressure Service Recommendations...0
      O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For Standard Pressure Service Recommendations...0
      O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For High Pressure Service Recommendations...0
      Service Recommendations for Metric Series Four Bolt Flange Fitting...0
      Service Recommendations For Inch Series Four Bolt Flange Fittings...0
      Inch Series Four Bolt Flange Fitting For High Pressure Service Recommendations...0
      Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings...0
      Service Recommendations For O-Ring Boss Fittings With Shoulder...0
      Metric 24° O-Ring Seal DIN 20078 Service Recommendations...0
  Section 01: Tracks...0
    Group 0130: Track System...0
      Track Roller Remove and Install...0
      Track Roller Disassemble and Assemble...0
      Track Roller Pressure Test...0
      Track Carrier Roller Remove and Install...0
      Metal Face Seals Repair...0
      Track Shoe Remove and Install...0
      Track Chain Remove and Install...0
      Track Chain Disassemble and Assemble...0
      Track Chain Repair to Replace Broken Part...0
      Sprocket Remove and Install...0
      Front Idler Remove and Install...0
      Front Idler Disassemble and Assemble...0
      Track Adjuster and Recoil Spring Remove and Install...0
      Track Adjuster and Recoil Spring Disassemble and Assemble...0
  Section 02: Axles, Differentials, and Suspension Systems...0
    Group 0250: Axle Shaft, Bearings, and Reduction Gears...0
      Travel Gear Case Remove and Install...0
      Travel Gear Case Disassemble and Assemble...0
    Group 0260: Hydraulic System...0
      Travel Motor and Park Brake Remove and Install...0
      Travel Motor and Park Brake Disassemble and Assemble...0
      Park Brake Valve Disassemble and Assemble...0
      Travel Motor and Park Brake Start-Up Procedure...0
  Section 04: Engine...0
    Group 0400: Removal and Installation...0
      Engine Remove and Install...0
  Section 05: Engine Auxiliary System...0
    Group 0510: Cooling Systems...0
      Radiator Remove and Install...0
      Hydraulic Oil Cooler Remove and Install...0
      Charge Air Cooler Remove and Install...0
      Fuel Cooler Remove and Install...0
      Fan, Fan Guard, and Fan Shroud Remove and Install...0
      Serpentine Belt Remove and Install...0
      Coolant Recovery Tank Remove and Install...0
    Group 0520: Intake System...0
      Air Cleaner Remove and Install...0
    Group 0530: External Exhaust Systems...0
      Exhaust Tube Remove and Install...0
      Diesel Particulate Filter (DPF) Remove and Install...0
      Exhaust Filter Remove and Install...0
      Exhaust Filter Disassemble and Assemble...0
    Group 0560: External Fuel Supply Systems...0
      Fuel Tank Remove and Install...0
      Primary Fuel Filter and Water Separator Remove and Install...0
      Final Fuel Filter Remove and Install...0
      Auxiliary Fuel Filter Remove and Install (If Equipped)...0
  Section 07: Damper Drive (Flex Coupling)...0
    Group 0752: Elements...0
      Damper Drive (Flex Coupling) Remove and Install...0
  Section 17: Frame or Supporting Structure...0
    Group 1740: Frame Installation...0
      Welding on Machine...0
    Group 1749: Chassis Weights...0
      Counterweight Remove and Install...0
  Section 18: Operator's Station...0
    Group 1800: Removal and Installation...0
      Cab Remove and Install...0
      Monitor Remove and Install...0
    Group 1810: Operator Enclosure...0
      Windshield Remove and Install...0
      Windshield Disassemble and Assemble...0
      Sliding Windows Remove and Install...0
      Windowpanes Remove and Install...0
      Windowpanes Dimensions...0
    Group 1821: Seat and Seat Belt...0
      Seat Remove and Install...0
      Seat Belt Remove and Install...0
      Mechanical Suspension Seat Disassemble and Assemble...0
      Air Suspension Seat Disassemble and Assemble...0
      Left and Right Console Covers Remove and Install...0
    Group 1830: Heating and Air Conditioning...0
      Refrigerant Cautions and Proper Handling...0
      Flush and Purge Air Conditioning System...0
      R134a Refrigerant Oil Information...0
      R134a Refrigerant Recovery, Recycling, and Charging Station Installation Procedure...0
      R134a Compressor Oil Charge Check...0
      R134a Compressor Oil Removal...0
      Recover R134a Refrigerant...0
      Evacuate R134a System...0
      Charge R134a System...0
      Air Conditioner Compressor Remove and Install...0
      Condenser Remove and Install...0
      Heater and Air Conditioner Remove and Install...0
      Heater and Air Conditioner Blower Motor Remove and Install...0
      Receiver-Dryer Remove and Install...0
  Section 19: Sheet Metal...0
    Group 1910: Hood and Engine Side Shields...0
      Hood Remove and Install...0
  Section 32: Blade (Backfill) (If Equipped)...0
    Group 3201: Blades...0
      Blade Remove and Install...0
    Group 3260: Hydraulic System...0
      Blade Pump Remove and Install...0
      Blade Pump Disassemble and Assemble...0
      Blade Pump Pressure Relief Valve Remove and Install...0
      Blade Control Valve Remove and Install...0
      Blade Control Valve Disassemble and Assemble...0
      Blade Pilot Control Valve Remove and Install...0
      Blade Pilot Control Valve Disassemble and Assemble...0
      Blade Cylinder Remove and Install...0
      Blade Cylinder Disassemble and Assemble...0
  Section 33: Excavator...0
    Group 3302: Buckets...0
      Bucket Remove and Install...0
      Adjust Bucket Pivot End Play...0
      Bucket Pin-Up Data...0
    Group 3340: Frames...0
      Bucket Links Remove and Install...0
      Arm Remove and Install...0
      Boom Remove and Install...0
      Inspect Pins, Bushings, and Bosses—Front Attachment...0
      Cylinder Specifications...0
      Bushings and Seal Remove and Install...0
    Group 3360: Hydraulic System...0
      Apply Vacuum to Hydraulic Oil Tank...0
      General Hydraulic Oil Cleanup Procedure...0
      Hydraulic Component Failure Cleanup Procedure...0
      Pump 1 and 2 Remove and Install...0
      Pump 1 and 2 Disassemble and Assemble...0
      Pump 1 and 2 Inspection...0
      Pump 1 and 2 Start-Up Procedure...0
      Pump 1 and 2 Regulator Remove and Install...0
      Pump 1 and 2 Regulator Disassemble and Assemble...0
      Pilot Pump Remove and Install...0
      Pilot Pump Disassemble and Assemble...0
      Pilot Pressure Regulating Valve and Filter Remove and Install...0
      Pilot Pressure Regulating Valve and Filter Disassemble and Assemble...0
      Pilot Shutoff Solenoid Valve Remove and Install...0
      Pilot Shutoff Solenoid Valve Disassemble and Assemble...0
      Solenoid Valve Manifold Remove and Install...0
      Solenoid Valve Remove and Install—Power Dig (SG), Arm Regenerative (SC), Arm 2 Flow Control (SD), and Dig Regenerative (SF) Valves...0
      Solenoid Valve Disassemble and Assemble—Power Dig (SG), Arm Regenerative (SC), Arm 2 Flow Control (SD), and Dig Regenerative (SF) Valves...0
      Pilot Valve (Left and Right) Remove and Install...0
      Pilot Valve (Left and Right) Disassemble and Assemble...0
      Travel Pilot Valve Remove and Install...0
      Travel Pilot Valve Disassemble and Assemble...0
      Pilot Signal Manifold Remove and Install...0
      Pilot Signal Manifold Disassemble and Assemble...0
      Control Valve Remove and Install...0
      Control Valve Halves Disassemble and Assemble...0
      Control Valve (5-Spool) Disassemble and Assemble...0
      Control Valve (4-Spool) Disassemble and Assemble...0
      Hydraulic Oil Tank Remove and Install...0
      Hydraulic Oil Tank Disassemble and Assemble...0
      Restriction Valve Remove and Install...0
      Hydraulic Oil Cooler Bypass Valve Remove and Install...0
      Boom Cylinder Remove and Install...0
      Boom Cylinder Disassemble and Assemble...0
      Arm Cylinder Remove and Install...0
      Arm Cylinder Disassemble and Assemble...0
      Bucket Cylinder Remove and Install...0
      Bucket Cylinder Disassemble and Assemble...0
      Hydraulic Cylinder Bleed Procedure...0
  Section 43: Swing or Pivoting System...0
    Group 4350: Mechanical Drive Elements...0
      Swing Gear Case Remove and Install...0
      Swing Gear Case Disassemble and Assemble...0
      Upperstructure Remove and Install...0
      Swing Bearing Remove and Install...0
      Swing Bearing Disassemble and Assemble...0
      Swing Bearing Upper Seal Install...0
      Swing Bearing Lower Seal Install...0
    Group 4360: Hydraulic System...0
      Center Joint Remove and Install...0
      Center Joint Disassemble and Assemble...0
      Center Joint Air Test...0
      Swing Motor and Park Brake Remove and Install...0
      Swing Motor and Park Brake Disassemble...0
      Swing Motor and Park Brake Inspection...0
      Swing Motor and Park Brake Assemble...0
      Swing Motor and Park Brake Start-Up Procedure...0
      Crossover Relief Valve and Make-Up Check Valve Remove and Install...0
      Make-Up Check Valve Disassemble and Assemble...0
      Swing Park Brake Check Valve and Orifice Remove and Install...0
  Section 99: Dealer Fabricated Tools...0
    Group 9900: Dealer Fabricated Tools...0
      DF1063 Lift Bracket...0
      ST4920 Track Recoil Spring Disassembly and Assembly Tool...0
      DFT1087 Track Recoil Spring Disassembly and Assembly Guard Tool...0
      DFT1110 Spacer...0
      DFT1130 Adapter...0
      DFT1036A Travel Gear Case Nut Wrench...0
      DFT1109 Holding Bar...0
      Center Joint (Rotary Manifold) Lifting Tool...0
      DFT1119 Pump Support...0
      DFT1237 Swing Gear Case Nut Spanner Wrench...0
Foreword...0
Technical Information Feedback Form...0
Recognize Safety Information...0
Recognize Safety Information...0
Recognize Safety Information...0
Follow Safety Instructions...0
Operate Only If Qualified...0
Wear Protective Equipment...0
Avoid Unauthorized Machine Modifications...0
Control Pattern Selector—If Equipped...0
Add Cab Guarding for Special Uses...0
Inspect Machine...0
Stay Clear of Moving Parts...0
Avoid High-Pressure Fluids...0
Avoid High-Pressure Oils...0
Work In Ventilated Area...0
Prevent Fires...0
Prevent Battery Explosions...0
Handle Chemical Products Safely...0
Decommissioning — Proper Recycling and Disposal of Fluids and Components...0
Exhaust Filter Ash Handling and Disposal...0
Prepare for Emergencies...0
Clean Debris from Machine...0
Use Steps and Handholds Correctly...0
Start Only From Operator's Seat...0
Use and Maintain Seat Belt...0
Prevent Unintended Machine Movement...0
Avoid Work Site Hazards...0
Keep Riders Off Machine...0
Avoid Backover Accidents...0
Inspect and Maintain ROPS...0
Avoid Machine Tip Over...0
Use Special Care When Lifting Objects...0
Add and Operate Attachments Safely...0
Park and Prepare for Service Safely...0
Service Cooling System Safely...0
Remove Paint Before Welding or Heating...0
Make Welding Repairs Safely...0
Drive Metal Pins Safely...0
Clean Exhaust Filter Safely...0
Metric Bolt and Cap Screw Torque Values...0
Metric Bolt and Cap Screw Torque Values...0
Additional Metric Cap Screw Torque Values...0
Unified Inch Bolt and Cap Screw Torque Values...0
Service Recommendations for 37° Flare and 30° Cone Seat Connectors...0
Service Recommendations for O-Ring Boss Fittings...0
  Straight Fitting...0
  Angle Fitting...0
Service Recommendations For Flared Connections—Straight or Tapered Threads...0
Service Recommendations For Flat Face O-Ring Seal Fittings...0
O-Ring Boss Fittings In Aluminum Housing Service Recommendations—Excavators...0
O-Ring Face Seal Fittings With SAE Inch Hex Nut And Stud End For High Pressure Service Recommendations...0
O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For Standard Pressure Service Recommendations...0
O-Ring Face Seal Fittings With Metric Hex Nut And Stud End For High Pressure Service Recommendations...0
Service Recommendations for Metric Series Four Bolt Flange Fitting...0
Service Recommendations For Inch Series Four Bolt Flange Fittings...0
Inch Series Four Bolt Flange Fitting For High Pressure Service Recommendations...0
Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings...0
Service Recommendations For O-Ring Boss Fittings With Shoulder...0
Metric 24° O-Ring Seal DIN 20078 Service Recommendations...0
Track Roller Remove and Install...0
Track Roller Remove and Install...0
Track Roller Remove and Install...0
Track Roller Disassemble and Assemble...0
Track Roller Pressure Test...0
Track Carrier Roller Remove and Install...0
Metal Face Seals Repair...0
Track Shoe Remove and Install...0
Track Chain Remove and Install...0
Track Chain Disassemble and Assemble...0
Track Chain Repair to Replace Broken Part...0
Sprocket Remove and Install...0
Front Idler Remove and Install...0
Front Idler Disassemble and Assemble...0
Track Adjuster and Recoil Spring Remove and Install...0
Track Adjuster and Recoil Spring Disassemble and Assemble...0
Travel Gear Case Remove and Install...0
Travel Gear Case Remove and Install...0
Travel Gear Case Remove and Install...0
Travel Gear Case Disassemble and Assemble...0
  Disassemble Travel Gear Case...0
  Assemble Travel Gear Case...0
Travel Motor and Park Brake Remove and Install...0
Travel Motor and Park Brake Remove and Install...0
Travel Motor and Park Brake Disassemble and Assemble...0
  Disassemble Travel Motor and Park Brake...0
  Assemble Travel Motor and Park Brake...0
Park Brake Valve Disassemble and Assemble...0
Travel Motor and Park Brake Start-Up Procedure...0
Engine Remove and Install...0
  Engine Remove...0
  Engine Install...0
Engine Remove and Install...0
  Engine Remove...0
  Engine Install...0
Engine Remove and Install...0
  Engine Remove...0
  Engine Install...0
Radiator Remove and Install...0
Radiator Remove and Install...0
Radiator Remove and Install...0
Hydraulic Oil Cooler Remove and Install...0
Charge Air Cooler Remove and Install...0
Fuel Cooler Remove and Install...0
Fan, Fan Guard, and Fan Shroud Remove and Install...0
  Fan Guard Remove and Install...0
  Fan Shroud Remove and Install...0
  Fan Remove and Install...0
Serpentine Belt Remove and Install...0
Coolant Recovery Tank Remove and Install...0
Air Cleaner Remove and Install...0
Air Cleaner Remove and Install...0
Exhaust Tube Remove and Install...0
Exhaust Tube Remove and Install...0
Diesel Particulate Filter (DPF) Remove and Install...0
Exhaust Filter Remove and Install...0
Exhaust Filter Disassemble and Assemble...0
Fuel Tank Remove and Install...0
Fuel Tank Remove and Install...0
Primary Fuel Filter and Water Separator Remove and Install...0
Final Fuel Filter Remove and Install...0
Auxiliary Fuel Filter Remove and Install (If Equipped)...0
Damper Drive (Flex Coupling) Remove and Install...0
Damper Drive (Flex Coupling) Remove and Install...0
Damper Drive (Flex Coupling) Remove and Install...0
Welding on Machine...0
Welding on Machine...0
Welding on Machine...0
Counterweight Remove and Install...0
Counterweight Remove and Install...0
Cab Remove and Install...0
Cab Remove and Install...0
Cab Remove and Install...0
Monitor Remove and Install...0
Windshield Remove and Install...0
Windshield Remove and Install...0
Windshield Disassemble and Assemble...0
Sliding Windows Remove and Install...0
Windowpanes Remove and Install...0
Windowpanes Dimensions...0
Seat Remove and Install...0
Seat Remove and Install...0
Seat Belt Remove and Install...0
Mechanical Suspension Seat Disassemble and Assemble...0
Air Suspension Seat Disassemble and Assemble...0
Left and Right Console Covers Remove and Install...0
  Left Console Covers Remove and Install...0
  Right Console Covers Remove and Install...0
Refrigerant Cautions and Proper Handling...0
Refrigerant Cautions and Proper Handling...0
Flush and Purge Air Conditioning System...0
R134a Refrigerant Oil Information...0
R134a Refrigerant Recovery, Recycling, and Charging Station Installation Procedure...0
R134a Compressor Oil Charge Check...0
R134a Compressor Oil Removal...0
Recover R134a Refrigerant...0
Evacuate R134a System...0
Charge R134a System...0
Air Conditioner Compressor Remove and Install...0
Condenser Remove and Install...0
Heater and Air Conditioner Remove and Install...0
Heater and Air Conditioner Blower Motor Remove and Install...0
Receiver-Dryer Remove and Install...0
Hood Remove and Install...0
Hood Remove and Install...0
Hood Remove and Install...0
Blade Remove and Install...0
Blade Remove and Install...0
Blade Remove and Install...0
Blade Pump Remove and Install...0
Blade Pump Remove and Install...0
Blade Pump Disassemble and Assemble...0
Blade Pump Pressure Relief Valve Remove and Install...0
Blade Control Valve Remove and Install...0
Blade Control Valve Disassemble and Assemble...0
Blade Pilot Control Valve Remove and Install...0
Blade Pilot Control Valve Disassemble and Assemble...0
Blade Cylinder Remove and Install...0
Blade Cylinder Disassemble and Assemble...0
Bucket Remove and Install...0
Bucket Remove and Install...0
Bucket Remove and Install...0
Adjust Bucket Pivot End Play...0
Bucket Pin-Up Data...0
Bucket Links Remove and Install...0
Bucket Links Remove and Install...0
Arm Remove and Install...0
Boom Remove and Install...0
Inspect Pins, Bushings, and Bosses—Front Attachment...0
Cylinder Specifications...0
Bushings and Seal Remove and Install...0
Apply Vacuum to Hydraulic Oil Tank...0
Apply Vacuum to Hydraulic Oil Tank...0
General Hydraulic Oil Cleanup Procedure...0
Hydraulic Component Failure Cleanup Procedure...0
Pump 1 and 2 Remove and Install...0
Pump 1 and 2 Disassemble and Assemble...0
Pump 1 and 2 Inspection...0
Pump 1 and 2 Start-Up Procedure...0
Pump 1 and 2 Regulator Remove and Install...0
Pump 1 and 2 Regulator Disassemble and Assemble...0
Pilot Pump Remove and Install...0
Pilot Pump Disassemble and Assemble...0
Pilot Pressure Regulating Valve and Filter Remove and Install...0
Pilot Pressure Regulating Valve and Filter Disassemble and Assemble...0
Pilot Shutoff Solenoid Valve Remove and Install...0
Pilot Shutoff Solenoid Valve Disassemble and Assemble...0
Solenoid Valve Manifold Remove and Install...0
Solenoid Valve Remove and Install—Power Dig (SG), Arm Regenerative (SC), Arm 2 Flow Control (SD), and Dig Regenerative (SF) Valves...0
Solenoid Valve Disassemble and Assemble—Power Dig (SG), Arm Regenerative (SC), Arm 2 Flow Control (SD), and Dig Regenerative (SF) Valves...0
Pilot Valve (Left and Right) Remove and Install...0
Pilot Valve (Left and Right) Disassemble and Assemble...0
Travel Pilot Valve Remove and Install...0
Travel Pilot Valve Disassemble and Assemble...0
Pilot Signal Manifold Remove and Install...0
Pilot Signal Manifold Disassemble and Assemble...0
Control Valve Remove and Install...0
Control Valve Halves Disassemble and Assemble...0
Control Valve (5-Spool) Disassemble and Assemble...0
  Boom Lower Meter-In Cut Valve (164) Disassemble and Assemble...0
  Boom 2 Spool Assembly (165) Disassemble...0
  Boom 1 Spool Assembly (166) Disassemble...0
  Boom Anti-Drift Valve (Selector Valve) Assembly (167) Disassemble and Assemble...0
  Overload Relief Valve (Boom Bottom Side) Assembly (168) Disassemble and Assemble...0
  Control Valve (5-Spool) (Top Rear) Disassemble and Assemble...0
  Pilot Housing Assemble (157) Disassemble and Assemble...0
  Arm 1 Spool Assembly (158) Disassemble...0
  Arm 2 Spool Assembly (161) Disassemble...0
  Swing Spool Assembly (162) Disassemble...0
  Arm Regenerative Valve Assembly (163) Disassemble and Assemble...0
  Sleeve Assembly (159) Disassemble and Assemble...0
  Overload Relief Valve (Arm) Assembly (160) Disassemble and Assemble...0
  Control Valve (5-Spool) (Bottom) Disassemble and Assemble...0
  Pilot Plate Assembly (170) Disassemble and Assemble...0
  Digging Regenerative Valve Assembly (169) Disassemble and Assemble...0
  Bypass Shut-Out Valve Assembly (172) Disassemble and Assemble...0
  Overload Relief Valve Assembly (171) (2 used) Disassemble and Assemble...0
  Control Valve (5-Spool) (Left Side) Disassemble and Assemble...0
  Pilot Plate Assembly (172) Disassemble and Assemble...0
  Arm 1 Flow Rate Control Valve (Poppet Valve) Assembly (173) Disassemble and Assemble...0
  Load Check Valve (Boom 2 Parallel Circuit) Assembly (175) Disassemble and Assemble...0
  Load Check Valve (Digging Circuit) Assembly (174) Disassemble and Assemble...0
  Control Valve (5-Spool) (Right Side) Disassemble and Assemble...0
  Pilot Plate Assembly and Plug Assemblies (178 and 179) Disassemble and Assemble...0
  Load Check Valve Assembly (176) Disassemble and Assemble...0
  Flow Rate Control Valves (Boom and Arm 2 Poppet Valves) (177 and 180) Disassemble and Assemble...0
Control Valve (4-Spool) Disassemble and Assemble...0
  Overload Relief Valve Assembly (40) Disassemble and Assemble...0
  Check Valve Assembly (41) Disassemble and Assemble...0
  Main Relief Valve Assembly (42) Disassemble and Assemble...0
  Bucket Regenerative Cut Valve Assembly (43) Disassemble and Assemble...0
  Bucket Spool (44) Disassembly...0
  Auxiliary Spool (45) Disassembly...0
  Travel Spool (46) (2 used) Disassembly...0
  Pilot Housing (1) Assembly...0
  Control Valve (4-Spool) (bottom side) Disassemble and Assemble...0
  Overload Relief Valve (110) Disassemble and Assemble...0
  Flow combiner Valve Assembly (118) Disassemble and Assemble...0
  Auxiliary Flow Combiner Valve Assembly (119) Disassemble and Assemble...0
  Control Valve (4-Spool) (left side) Disassemble and Assemble...0
  Auxiliary Flow Rate Control Valve Assembly (Selector Valve) (121) Disassemble and Assemble...0
  Load Check Valve Assembly (travel left parallel circuit and travel left tandem circuit) (122 and 123) Disassemble and Assemble...0
  Check Valve Assembly (auxiliary flow combiner circuit) (124) Dissemble and Assemble...0
  Auxiliary Flow Rate Control Valve Assembly (poppet valve) (120) Disassemble and Assemble...0
  Control Valve (4-Spool) (right side) Disassemble and Assemble...0
  Bucket Flow Rate Control Valve (Selector Valve) Assembly (125) Disassemble and Assemble...0
  Check Valve (Flow Combiner Valve Circuit) Assembly (126) Disassemble and Assemble...0
  Load Check Valve (Orifice Bucket) Assembly (127) Disassemble and Assemble...0
  Check Valve (Flow Combiner Valve Circuit) Assembly (128) Disassemble and Assemble...0
Hydraulic Oil Tank Remove and Install...0
Hydraulic Oil Tank Disassemble and Assemble...0
Restriction Valve Remove and Install...0
Hydraulic Oil Cooler Bypass Valve Remove and Install...0
Boom Cylinder Remove and Install...0
Boom Cylinder Disassemble and Assemble...0
Arm Cylinder Remove and Install...0
Arm Cylinder Disassemble and Assemble...0
Bucket Cylinder Remove and Install...0
Bucket Cylinder Disassemble and Assemble...0
Hydraulic Cylinder Bleed Procedure...0
Swing Gear Case Remove and Install...0
Swing Gear Case Remove and Install...0
Swing Gear Case Remove and Install...0
Swing Gear Case Disassemble and Assemble...0
Upperstructure Remove and Install...0
Swing Bearing Remove and Install...0
Swing Bearing Disassemble and Assemble...0
Swing Bearing Upper Seal Install...0
Swing Bearing Lower Seal Install...0
Center Joint Remove and Install...0
Center Joint Remove and Install...0
Center Joint Disassemble and Assemble...0
Center Joint Air Test...0
Swing Motor and Park Brake Remove and Install...0
Swing Motor and Park Brake Disassemble...0
Swing Motor and Park Brake Inspection...0
Swing Motor and Park Brake Assemble...0
Swing Motor and Park Brake Start-Up Procedure...0
Crossover Relief Valve and Make-Up Check Valve Remove and Install...0
Make-Up Check Valve Disassemble and Assemble...0
Swing Park Brake Check Valve and Orifice Remove and Install...0
DF1063 Lift Bracket...0
DF1063 Lift Bracket...0
DF1063 Lift Bracket...0
ST4920 Track Recoil Spring Disassembly and Assembly Tool...0
DFT1087 Track Recoil Spring Disassembly and Assembly Guard Tool...0
DFT1110 Spacer...0
DFT1130 Adapter...0
DFT1036A Travel Gear Case Nut Wrench...0
DFT1109 Holding Bar...0
Center Joint (Rotary Manifold) Lifting Tool...0
DFT1119 Pump Support...0
DFT1237 Swing Gear Case Nut Spanner Wrench...0

John Deere 135G Excavator Technical Repair Manual (TM12669)