Complete digital workshop manual contains service, maintenance, and troubleshooting information for the Caterpillar C10, C12 Engine. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your C10, C12 Engine like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Caterpillar C10, C12 Engine is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

ENGINE - INDUSTRIAL
Model Prefix
C-10 INDUSTRIAL ENGINE BCX
C-10 INDUSTRIAL ENGINE Z2B

ENGINE - TRUCK
Model Prefix
C-10 REMAN ENGINE AKB
C-10 REMAN ENGINE F8H
C-10 TRUCK ENGINE 2PN
C-10 TRUCK ENGINE 3CS
C-10 TRUCK ENGINE 8YS
C-10 TRUCK ENGINE MBJ

ENGINE - GENERATOR SET
Model Prefix
C-12 GEN SET ENGINE BCY

ENGINE - INDUSTRIAL
Model Prefix
C-12 INDUSTRIAL ENGINE BDL

ENGINE - MACHINE
Model Prefix
C-12 ENGINE - MACHINE 5ED
C-12 ENGINE - MACHINE BDL
C-12 ENGINE - MACHINE JAC

ENGINE - TRUCK
Model Prefix
C-12 REMAN ENGINE ALS
C-12 REMAN ENGINE R1D
C-12 TRUCK ENGINE 1YN
C-12 TRUCK ENGINE 2KS
C-12 TRUCK ENGINE 8YF
C-12 TRUCK ENGINE 9NS
C-12 TRUCK ENGINE 9SM
C-12 TRUCK ENGINE CPD
C-12 TRUCK ENGINE GEP
C-12 TRUCK ENGINE MBL
C-12 TRUCK ENGINE TME

MARINE PRODUCTS
Model Prefix
C-12 MARINE ENGINE 9HP
C-12 MARINE ENGINE K1M
C12 MARINE ENGINE C1Z
C12 MARINE ENGINE NFL

MANUAL LIST:
bonus_material
RENR2234 - Specifications (C-10 & C-12 Truck Engines)
RENR2235 - Systems Operation (C-10 and C-12 Truck Engines)
RENR2235 - Testing & Adjusting (C-10 and C-12 Truck Engines)
RENR2236 - Disassembly & Assembly (C-10 & C-12 On-Highway Engines)
SEBU6758 - Operation & Maintenance Manual (3176B, C-10, C-12 & 3406E Truck Engine)
SENR1012 - Troubleshooting (3176B, C-10, C-12 & 3406E Truck Engines Basic Electronic Trou)
SENR5574 - Schematic - Electrical System (C-10, C-12, 3406E, 3178B On-highway Engines)
SENR5582 - Troubleshooting (3176B, C-10, C-12 & 3406E Truck Engines)
Caterpillar C-10 & C-12 Mechanical (Peterbilt 387).pdf
RENR1318 - Disassembly & Assembly (C-10, C-12 Truck Engines).pdf
RENR1322 - Specifications (C-10, C-12 Truck Engines).pdf
RENR2235 - Systems Operation, Testing & Adjusting (C-10, C-12 Truck Engines).pdf
SENR1002 - Disassembly & Assembly (C-10, C-12 Truck Engines).pdf
SENR6592 - Specifications (C-10 & C-12 Truck Engines).pdf
SENR6593 - Systems Operation, Testing & Adjusting (C-10, C-12 Truck Engines).pdf
SENR9677 - Specifications (C-10, C-12 Truck Engines).pdf
SENR9678 - Systems Operation, Testing & Adjusting (C-10, C-12 Truck Engines).pdf
SENR9682 - Disassembly & Assembly (C-10 & C-12 Truck Engines).pdf
…

EXCERPT:
Turbocharger - Remove
Removal Procedure
NOTICE: Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to
collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 25
Typical Example
Illustration 26
Typical example
1. Remove two bolts (3) and washers (4).
2. Remove bolt (8) with the nut and the washer. Remove saddle clamp (7).
3. Remove two bolts (9) and the washers.
4. Remove oil supply tube (2) and the gasket.
5. Remove two bolts (5) and the washers.
6. Remove oil drain tube (6). Remove the O-ring seal and the gasket from oil drain tube (6).
7. Remove four nuts (11).
8. Remove turbocharger (1) and gasket (10) from the exhaust manifold.
Turbocharger - Install
SMCS Code: 1052-012
Installation Procedure
1. Inspect the condition of the gasket between the turbocharger and the exhaust manifold and the O-ring seals. Replace the O-ring seals and the gaskets, if necessary.
...