Linhai LH400CUV-2 Bighorn CUV Factory Service & Shop Manual
Catalog:
Model:
Complete workshop & service manual with electrical wiring diagrams for Linhai LH400CUV-2 Bighorn CUV. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.
This Linhai LH400CUV-2 Bighorn CUV service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.
EXCERPT:
CONTENTS
CHAPTER1 ……………………………………………………….General Information
CHAPTER2 ………………………………………….……………………Maintenance
CHAPTER3…………………………………….……….….…………………….Engine
CHAPTER4…………………………………………..…………………………Chassis
CHAPTER5………………………………………………….……………….Final Drive
CHAPTER6……………………………………………….………………Transmission
CHAPTER7………………………………………………………………………Brakes
CHAPTER8………………………………………………….….……………..Electrical
…
2.6 BRAKING SYSTEM INSPECTION
The following checks are recommended to keep the braking system in good operating condition. Service life of braking system components depends on operating conditions. Inspect brakes in accordance with the maintenance schedule and before each ride
Keep fluid level in the master cylinder reservoir to the indicated level on reservoir.
Use DOT 3 brake fluid.
NOTE: Use new brake fluid or brake fluid from a sealed container to avoid contamination to system.
Check brake system for fluid leaks.
Check brake for excessive travel or spongy feel.
Check friction pads for wear, damage and looseness.
Check surface condition of the disc.
BRAKE PAD INSPECTION
Pads should be changed when friction material is worn to 3/64" (1mm).
HOSE/FITTING INSPECTION
Check braking system hoses and fittings for cracks, deterioration, abrasion, and leaks. Tighten any loose fittings and replace any worn or damaged parts.
…
