Complete workshop & service manual with electrical wiring diagrams for Cagiva Planet Motorcycle. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Cagiva Planet Motorcycle service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

8000 85827 - Planet Workshop Manual.pdf

EXCERPT:
Brake discs.
Control of the disc is important; it must be perfectly clean, i.e. without rust, oil, grease or any other dirt and no deep scorings must be noticed.
Diameter of front brake disc: 320 mm/12.59 in.
Thickness of front disc (new): 4 mm/0. 157 in.
Thickness of front disc at max wear limit: 3,5 mm/0.13 in.
Diameter of rear brake disc: 230 mm/9.05 in.
Thickness of rear disc (new): 4 mm/0. 157 in.
Thickness of rear disc at max wear limit: 3,5 mm/0.13 in.
The front disc of this motorcycle is floating, i.e. it consists of a port integral to the wheel rim, and a braking band that, by means of special bushings where the disc can slide freely, is able to get the proper position under the effect of the brake caliper.
Should the disc be replaced, both the components are to be replaced.
For the rear disc, the distortion shall not exceed 0,3 mm/0.011 in. (this measure is lo be taken with a comparator and with the disc mounted on the rim).
To remove the disc from the wheel rim, it is necessary to unscrew the six fastening screws.
Upon reassembly, perfectly clean the bearing surfaces and screw down the screws according to the required driving torque.