Complete workshop & service manual with electrical wiring diagrams for Hyundai Construction Backhoe Loader HB90, HB100. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Hyundai Construction Backhoe Loader HB90, HB100 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
BACKHOE LOADER HB100 / HB90 CONTENTS
FOREWORD
SECTION 1
GENERAL
Group 1 Safety Hints
Group 2 Specifications
Group 3 Operation Checkout Record Sheet
SECTION 2
ENGINE
Group 1 Structure and Function

Group 2 Engine speed & stall RPM
SECTION 3
POWER TRAIN SYSTEM
Group 1 Structure and Function
Group 2 Operational Checks and Troubleshooting
Group 3 Test and Adjustments
Group 4 Disassembly and Assembly
- Transmission
- Axle
SECTION 4
BRAKE SYSTEM
Group 1 Structure and Function
Group 2 Operational Checks and Troubleshooting
Group 3 Test and Adjustments
SECTION 5
STEERING SYSTEM
Group 1 Structure and Function
Group 2 Operational Checks and Troubleshooting
Group 3 Test and Adjustments
Group 4 Disassembly and Assembly
SECTION 6
WORK EQUIPMENT
Group 1 Structure and Function
Group 2 Operational Checks and Troubleshooting
Group 3 Test and Adjustments
Group 4 Disassembly and Assembly
SECTION 7
ELECTRICAL SYSTEM
Group 1 Component Location
Group 2 Electrical Circuit
Group 3 Monitoring System
Group 4 Switches
Group 5 Electrical Component Specification
Group 6 Connectors
…
GROUP 2 OPERATIONAL CHECKS AND TROUBLESHOOTING
1. POWER TRAIN OPERATIONAL CHECKS
This procedure is designed so that the mechanic can make a quick check of the system using a minimum amount of diagnostic equipment. If you need additional information, read Structure and function, Group 1.
A location will be required which is level and has adequate space to complete the checks.
The engine and all other major components must be at operating temperature for some checks.
Locate system check in the left column and read completely, following the sequence from left to right.
Read each check completely before performing.
At the end of each check, if no problem is found (OK), that check is complete or an additional check is needed. If problem is indicated (NOT OK), you will be given repair required and group location.
If verification is needed, you will be given next best source of information:
Chapter 2 : Troubleshooting
Group 3 : Tests and adjustments
…