Logo

Cart

Click title to display cart contents.
0 Items $0.00

John Deere 310SL Backhoe Loader Workshop Service Repair Manual (TM13298X19)

Catalog: 

Make: 

Model: 

US Dollar: $55.00

John Deere 310SL Backhoe Loader Workshop Service Repair (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting …) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

This manual contains high quality images, instructions to help you to maintenance, troubleshoot, diagnose, and repair. This document is printable, without restrictions, contains searchable text, bookmarks, crosslinks for easy navigation.

TM13298X19 - John Deere 310SL Backhoe Loader Technical Manual (Repair).epub
TM13298X19 - John Deere 310SL Backhoe Loader Technical Manual (Repair).pdf

TABLE OF CONTENTS / FILE LIST:
Foreword
Manual Identification—READ THIS FIRST!
Section 00: General Information
  Group 0001: Safety
    Recognize Safety Information
    Follow Safety Instructions
    Operate Only If Qualified
    Wear Protective Equipment
    Avoid Unauthorized Machine Modifications
    Inspect Machine
    Stay Clear of Moving Parts
    Avoid High-Pressure Fluids
    Avoid High-Pressure Oils
    Work In Ventilated Area
    Avoid Static Electricity Risk When Refueling
    Prevent Fires
    In Case of Machine Fire
    Prevent Battery Explosions
    Handle Chemical Products Safely
    Exhaust Filter Ash Handling and Disposal
    Prepare for Emergencies
    Clean Debris from Machine
    Decommissioning — Proper Recycling and Disposal of Fluids and Components
    Use Steps and Handholds Correctly
    Start Only From Operator's Seat
    Use and Maintain Seat Belt
    Prevent Unintended Machine Movement
    Prevent Unintended Machine Movement—If Equipped With Pilot Controls
    Avoid Work Site Hazards
    Keep Riders Off Machine
    Avoid Backover Accidents
    Avoid Machine Tipover
    Operating or Traveling On Public Roads
    Inspect and Maintain ROPS
    Travel Safely
    Prevent Acid Burns
    Add and Operate Attachments Safely
    Use Special Care When Operating
    Park and Prepare for Service Safely
    Service Cooling System Safely
    Remove Paint Before Welding or Heating
    Make Welding Repairs Safely
    Drive Metal Pins Safely
    Follow Tire Recommendations
    Service Tires Safely
    Clean Exhaust Filter Safely
  Group 0003: Torque Values
    Metric Bolt and Cap Screw Torque Values
    Additional Metric Cap Screw Torque Values
    Unified Inch Bolt and Cap Screw Torque Values
    Service Recommendations for 37° Flare and 30° Cone Seat Connectors
    Service Recommendations for O-Ring Boss Fittings
    O-Ring Boss Fittings in Aluminum Housing Service Recommendations—Excavators
    Service Recommendations for Flared Connections—Straight or Tapered Threads
    Service Recommendations for Flat Face O-Ring Seal Fittings
    O-Ring Face Seal Fittings With SAE Inch Hex Nut and Stud End for High-Pressure Service Recommendations
    O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for Standard Pressure Service Recommendations
    O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for High-Pressure Service Recommendations
    Service Recommendations for Metric Series Four Bolt Flange Fitting
    Service Recommendations For Inch Series Four Bolt Flange Fittings
    Inch Series Four Bolt Flange Fitting for High-Pressure Service Recommendations
    Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings
    Service Recommendations For O-Ring Boss Fittings With Shoulder
    Metric 24° O-Ring Seal DIN 20078 Service Recommendations
Recognize Safety Information
Recognize Safety Information
Follow Safety Instructions
Operate Only If Qualified
Wear Protective Equipment
Avoid Unauthorized Machine Modifications
Inspect Machine
Stay Clear of Moving Parts
Avoid High-Pressure Fluids
Avoid High-Pressure Oils
Work In Ventilated Area
Avoid Static Electricity Risk When Refueling
Prevent Fires
In Case of Machine Fire
Prevent Battery Explosions
Handle Chemical Products Safely
Exhaust Filter Ash Handling and Disposal
Prepare for Emergencies
Clean Debris from Machine
Decommissioning — Proper Recycling and Disposal of Fluids and Components
Use Steps and Handholds Correctly
Start Only From Operator's Seat
Use and Maintain Seat Belt
Prevent Unintended Machine Movement
Prevent Unintended Machine Movement—If Equipped With Pilot Controls
Avoid Work Site Hazards
Keep Riders Off Machine
Avoid Backover Accidents
Avoid Machine Tipover
Operating or Traveling On Public Roads
Inspect and Maintain ROPS
Travel Safely
Prevent Acid Burns
Add and Operate Attachments Safely
Use Special Care When Operating
Park and Prepare for Service Safely
Service Cooling System Safely
Remove Paint Before Welding or Heating
Make Welding Repairs Safely
Drive Metal Pins Safely
Follow Tire Recommendations
Service Tires Safely
Clean Exhaust Filter Safely
Metric Bolt and Cap Screw Torque Values
Metric Bolt and Cap Screw Torque Values
Additional Metric Cap Screw Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Service Recommendations for 37° Flare and 30° Cone Seat Connectors
Service Recommendations for O-Ring Boss Fittings
  Straight Fitting
  Angle Fitting
O-Ring Boss Fittings in Aluminum Housing Service Recommendations—Excavators
Service Recommendations for Flared Connections—Straight or Tapered Threads
Service Recommendations for Flat Face O-Ring Seal Fittings
O-Ring Face Seal Fittings With SAE Inch Hex Nut and Stud End for High-Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for Standard Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for High-Pressure Service Recommendations
Service Recommendations for Metric Series Four Bolt Flange Fitting
Service Recommendations For Inch Series Four Bolt Flange Fittings
Inch Series Four Bolt Flange Fitting for High-Pressure Service Recommendations
Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings
Service Recommendations For O-Ring Boss Fittings With Shoulder
Metric 24° O-Ring Seal DIN 20078 Service Recommendations
Section 01: Wheels
  Group 0110: Powered or Non-Powered Wheels and Fastenings
    Rear Wheel Assembly Remove and Install
    Front Wheel Assembly Remove and Install
    Tire Remove and Install
Rear Wheel Assembly Remove and Install
Rear Wheel Assembly Remove and Install
Front Wheel Assembly Remove and Install
Tire Remove and Install
Section 02: Axles and Suspension Systems
  Group 0225: Input Drive Shafts and U-Joints
    Universal Joint and Drive Shaft Remove and Install
  Group 0230: Non-Powered Wheel Axles
    Hub Assembly Remove and Install
    Spindle Assembly Remove and Install
    Tie Rod Remove and Install
    Non-Powered Front Axle Remove and Install—If Equipped
  Group 0240: Powered Wheel Axle (MFWD)
    Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
    Mechanical Front Wheel Drive (MFWD) Axle Disassembly
    Mechanical Front Wheel Drive (MFWD) Axle Assemble
    Limited Slip Differential Disassemble and Assemble
  Group 0250: Axle Shaft, Bearings, and Reduction Gears
    Service Brakes Inspection
    Rear Axle Remove and Install
    Rear Axle Disassemble
    Rear Axle Assemble
    Park Brake Disassemble and Assemble
    Gear Tooth Contact Pattern Check
Universal Joint and Drive Shaft Remove and Install
  Rear Drive Shaft Remove and Install
  MFWD Drive Shaft Remove and Install—If Equipped
  U-Joint Remove and Install
Universal Joint and Drive Shaft Remove and Install
  Rear Drive Shaft Remove and Install
  MFWD Drive Shaft Remove and Install—If Equipped
  U-Joint Remove and Install
Hub Assembly Remove and Install
Hub Assembly Remove and Install
Spindle Assembly Remove and Install
Tie Rod Remove and Install
  Nonpowered Axle
  Mechanical Front Wheel Drive (MFWD) Axle
Non-Powered Front Axle Remove and Install—If Equipped
Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Disassembly
  Planetary Drive Removal
  Ring Gear Removal
  Planetary Gears Removal
  Wheel Hub Removal and Disassembly
  Tie Rods Removal
  Steering Cylinder Removal
  Knuckle Housing Removal
  Drive Shaft Remove
  Knuckle Housing Disassembly
  Drive Shaft Disassembly
  Axle Housing Disassemble
Mechanical Front Wheel Drive (MFWD) Axle Assemble
  Axle Housing Assemble
  Knuckle Housing Assemble
  Drive Shaft Assemble
  Drive Shaft Install
  Knuckle Housing Install
  Wheel Hub Assemble
  Wheel Hub Install
  Ring Gear Install
  Planetary Gears Install
  Planetary Carrier Install
  Steering Cylinder Install
  Tie Rods Install
Limited Slip Differential Disassemble and Assemble
Service Brakes Inspection
Service Brakes Inspection
Rear Axle Remove and Install
Rear Axle Disassemble
Rear Axle Assemble
Park Brake Disassemble and Assemble
Gear Tooth Contact Pattern Check
Section 03: Transmission
  Group 0300: Removal and Installation
    Transmission Remove and Install
  Group 0350: Gear, Shafts, and Power Shift Clutches
    Transmission Outer Components Removal
    Transmission Outer Components Install
    Transmission Case Disassemble—Torque Converter Side
    Transmission Case Assemble—Torque Converter Side
    Clutch Packs Remove
    Clutch Packs Install
    High Range Forward, Low Range Forward, and Reverse Clutch Packs Disassemble and Assemble
    First Speed and Third Speed Clutch Disassemble and Assemble
    Second Speed Clutch Disassemble and Assemble
    Mechanical Front Wheel Drive (MFWD) Clutch Disassemble and Assemble
    Pump Drive Shaft Install
  Group 0360: Hydraulic System
    Transmission Charge Pump Remove and Install
    Transmission Charge Pump Disassemble and Assemble
Transmission Remove and Install
Transmission Remove and Install
Transmission Outer Components Removal
Transmission Outer Components Removal
Transmission Outer Components Install
Transmission Case Disassemble—Torque Converter Side
Transmission Case Assemble—Torque Converter Side
Clutch Packs Remove
Clutch Packs Install
High Range Forward, Low Range Forward, and Reverse Clutch Packs Disassemble and Assemble
First Speed and Third Speed Clutch Disassemble and Assemble
Second Speed Clutch Disassemble and Assemble
  DISASSEMBLE
  ASSEMBLE
Mechanical Front Wheel Drive (MFWD) Clutch Disassemble and Assemble
Pump Drive Shaft Install
Transmission Charge Pump Remove and Install
Transmission Charge Pump Remove and Install
Transmission Charge Pump Disassemble and Assemble
Section 04: Engine
  Group 0400: Removal and Installation
    John Deere Engine Operation
    Engine Remove and Install
John Deere Engine Operation
John Deere Engine Operation
Engine Remove and Install
  REMOVAL
  INSTALLATION
Section 05: Engine Auxiliary System
  Group 0505: Cold Weather Starting Aids
    Coolant Heater Remove and Install—If Equipped
  Group 0510: Cooling Systems
    Fan Remove and Install
    Fan Disassemble and Assemble
    Accessory Drive Belt Remove and Install
    Cooling Package Disassemble and Assemble
    Cooling Package Remove and Install
  Group 0520: Intake System
    Air Cleaner Remove and Install
    Charge Air Cooler Remove and Install
  Group 0530: Exhaust Systems
    Service Filter Cleaning
    JDG11340 Bellows Alignment Fixture
    Exhaust Bellows Alignment Procedure
    Aftertreatment Assembly Remove and Install
    Exhaust Filter Remove and Install
    Exhaust Tube Remove and Install
    Diesel Exhaust Fluid (DEF) Tank Remove and Install
    Diesel Exhaust Fluid (DEF) Header Remove and Install
    Diesel Exhaust Fluid (DEF) Header Disassemble and Assemble
    Diesel Exhaust Fluid (DEF) Tank Cleaning Procedure
    Diesel Exhaust Fluid (DEF) Dosing Unit Remove and Install
    Diesel Exhaust Fluid (DEF) Dosing Injector Remove and Install
    Diesel Exhaust Fluid (DEF) Decomposition Tube Remove and Install
  Group 0560: External Fuel Supply Systems
    Fuel Tank Remove and Install
Coolant Heater Remove and Install—If Equipped
Coolant Heater Remove and Install—If Equipped
Fan Remove and Install
  REMOVAL
  INSTALLATION
Fan Remove and Install
  REMOVAL
  INSTALLATION
Fan Disassemble and Assemble
  DISASSEMBLE
  ASSEMBLE
Accessory Drive Belt Remove and Install
Cooling Package Disassemble and Assemble
  DISASSEMBLE
  ASSEMBLE
  DISASSEMBLE
  ASSEMBLE
Cooling Package Remove and Install
  REMOVAL
  INSTALLATION
Air Cleaner Remove and Install
  Machine Preparation
  Additional Information
Air Cleaner Remove and Install
  Machine Preparation
  Additional Information
Charge Air Cooler Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Service Filter Cleaning
Service Filter Cleaning
JDG11340 Bellows Alignment Fixture
Exhaust Bellows Alignment Procedure
  Tools
  Machine Preparation
  Exhaust Bellows Alignment Procedure
Aftertreatment Assembly Remove and Install
  REMOVAL
  INSTALLATION
Exhaust Filter Remove and Install
  REMOVAL
  INSTALLATION
Exhaust Tube Remove and Install
  REMOVAL
  INSTALLATION
Diesel Exhaust Fluid (DEF) Tank Remove and Install
Diesel Exhaust Fluid (DEF) Header Remove and Install
  MACHINE PREPARATION
  REMOVAL AND INSTALLATION (S.N. —303523)
  REMOVAL AND INSTALLATION (S.N. 303524— )
Diesel Exhaust Fluid (DEF) Header Disassemble and Assemble
  Diesel Exhaust Fluid (DEF) Baffle Remove and Install
  Diesel Exhaust Fluid (DEF) Tank Header Suction Screen Remove and Install (S.N. —303523)
  Diesel Exhaust Fluid (DEF) Tank Header Suction Filter Remove and Install (S.N. 303524— )
Diesel Exhaust Fluid (DEF) Tank Cleaning Procedure
  Cleaning Procedure—DEF Tank Removed
  Cleaning Procedure—DEF Tank Installed
Diesel Exhaust Fluid (DEF) Dosing Unit Remove and Install
  REMOVAL
  INSTALLATION
Diesel Exhaust Fluid (DEF) Dosing Injector Remove and Install
Diesel Exhaust Fluid (DEF) Decomposition Tube Remove and Install
Fuel Tank Remove and Install
  REMOVAL
  INSTALLATION
Fuel Tank Remove and Install
  REMOVAL
  INSTALLATION
Section 06: Torque Converter
  Group 0651: Turbine, Gears, and Shaft
    Torque Converter Remove and Install
Torque Converter Remove and Install
Torque Converter Remove and Install
Section 09: Steering System
  Group 0920: Power Steering
    Steering Column Remove and Install
    Steering Wheel and Column Disassemble and Assemble
  Group 0960: Power Steering Hydraulic System
    Steering Valve Remove and Install
    Steering Valve Disassemble and Assemble
    Non-Powered Axle Steering Cylinder Remove and Install
    Non-Powered Axle Steering Cylinder Disassemble and Assemble
    Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Remove and Install
    Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Disassemble and Assemble
Steering Column Remove and Install
  Tilt Steering Column
  INSTALLATION
  Standard Steering Column
  INSTALLATION
Steering Column Remove and Install
  Tilt Steering Column
  INSTALLATION
  Standard Steering Column
  INSTALLATION
Steering Wheel and Column Disassemble and Assemble
Steering Valve Remove and Install
  REMOVAL
  INSTALLATION
Steering Valve Remove and Install
  REMOVAL
  INSTALLATION
Steering Valve Disassemble and Assemble
Non-Powered Axle Steering Cylinder Remove and Install
Non-Powered Axle Steering Cylinder Disassemble and Assemble
Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Remove and Install
Mechanical Front Wheel Drive (MFWD) Axle Steering Cylinder Disassemble and Assemble
Section 10: Service Brakes
  Group 1011: Active Elements
    Brake Disc and Pressure Plate Remove and Install
  Group 1015: Controls Linkage
    Brake Pedal Adjustment
  Group 1060: Hydraulic System
    Brake System Bleeding Procedure
    Power Boost Brake Valve Remove and Install
    Brake Valve Disassemble and Assemble
Brake Disc and Pressure Plate Remove and Install
Brake Disc and Pressure Plate Remove and Install
Brake Pedal Adjustment
Brake Pedal Adjustment
Brake System Bleeding Procedure
Brake System Bleeding Procedure
Power Boost Brake Valve Remove and Install
  REMOVAL
  INSTALLATION
Brake Valve Disassemble and Assemble
Section 11: Park Brake
  Group 1111: Active Elements
    Park Brake Remove and Install
Park Brake Remove and Install
Park Brake Remove and Install
Section 16: Electrical System
  Group 1600: Remove and Install
    Installation of Repair Wire Assembly (RWA)
    Electronic Controllers Remove and Install
    Remove Connector Body from Blade Terminals
    CINCH™ Connector Remove and Install
    CINCH™ Contact Installation
    CINCH™ CP Connector Remove and Install
    CINCH™ CP Contact Installation
    DEUTSCH® Connector Remove and Install
    DEUTSCH® Contact Installation
    Metri-Pack® Connector Remove and Install
    WEATHER PACK® Connector Remove and Install
    WEATHER PACK® Contact Installation
    Seat Position Sensor Remove and Install
  Group 1675: System Controls
    Multi-Function Lever (MFL) Remove and Install
    Transmission Control Lever (TCL) Remove and Install
Installation of Repair Wire Assembly (RWA)
  Install Repair Wire Assembly (RWA)—Method 1
  Install Repair Wire Assembly (RWA)—Method 2
Installation of Repair Wire Assembly (RWA)
  Install Repair Wire Assembly (RWA)—Method 1
  Install Repair Wire Assembly (RWA)—Method 2
Electronic Controllers Remove and Install
Remove Connector Body from Blade Terminals
CINCH™ Connector Remove and Install
CINCH™ Contact Installation
CINCH™ CP Connector Remove and Install
  Connector Removal
  Connector Installation
CINCH™ CP Contact Installation
DEUTSCH® Connector Remove and Install
  Circular Connectors
  Rectangular or Triangular Connectors
DEUTSCH® Contact Installation
Metri-Pack® Connector Remove and Install
  Pull-Type Connector
  Push-Type Connector
WEATHER PACK® Connector Remove and Install
WEATHER PACK® Contact Installation
Seat Position Sensor Remove and Install
  REMOVAL
  INSTALLATION
Multi-Function Lever (MFL) Remove and Install
Multi-Function Lever (MFL) Remove and Install
Transmission Control Lever (TCL) Remove and Install
Section 17: Frame or Supporting Structure
  Group 1740: Frame Installation
    Welding Repair of Major Structures
    Rivet Nut Fasteners Remove and Install
  Group 1749: Chassis Weights
    Counterweight Remove and Install—If Equipped
Welding Repair of Major Structures
Welding Repair of Major Structures
Rivet Nut Fasteners Remove and Install
Counterweight Remove and Install—If Equipped
Counterweight Remove and Install—If Equipped
Section 18: Operator's Station
  Group 1800: Removal and Installation
    Operator’s Station Remove and Install
  Group 1810: Operator Enclosure
    Front Window Wiper and Wiper Motor Remove and Install
    Rear Window Wiper and Wiper Motor Remove and Install
    Rear Window and Frame Assembly Remove and Install
    Front Console Remove and Install
    Fixed Window Remove and Install
    Non-Fixed Window Remove and Install
    Non-Fixed Window Adjustment
    Non-Fixed Window Latch Adjustment
    Cab Door Hinges and Latch Adjustment
    Headliner Remove and Install
    Cab Roof Remove and Install
  Group 1821: Seat and Seat Belt
    Seat Assembly Remove and Install
    Mechanical Suspension Seat Disassemble and Assemble
    Air Suspension Seat Disassemble and Assemble—If Equipped
  Group 1830: Heating and Air Conditioning
    R134a Refrigerant Cautions and Proper Handling
    R134a Refrigerant Oil Information
    R134a Refrigerant Recovery, Recycling, and Charging Station Installation Procedure
    Recover R134a Refrigerant
    Flush and Purge Air Conditioning System
    Evacuate R134a System
    Charge R134a System
    Evaporator or Heater Core Remove and Install
    Expansion Valve Remove and Install
    Air Conditioner Freeze Control Switch Remove and Install
    Receiver-Dryer Remove and Install
    Blower Mode Door Motor Remove and Install
    Condenser Remove and Install
    Compressor Remove and Install
Operator’s Station Remove and Install
  REMOVAL
  INSTALLATION
Operator’s Station Remove and Install
  REMOVAL
  INSTALLATION
Front Window Wiper and Wiper Motor Remove and Install
  REMOVAL
  INSTALLATION
Front Window Wiper and Wiper Motor Remove and Install
  REMOVAL
  INSTALLATION
Rear Window Wiper and Wiper Motor Remove and Install
Rear Window and Frame Assembly Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Front Console Remove and Install
  REMOVAL
  INSTALLATION
Fixed Window Remove and Install
Non-Fixed Window Remove and Install
  Upper and Middle Sliding Window (11 and 12)
  Lower Fixed Window (13)
  Cab Door Upper Window and Side Window
Non-Fixed Window Adjustment
  Cab Door Upper Window
  Side Windows
Non-Fixed Window Latch Adjustment
Cab Door Hinges and Latch Adjustment
Headliner Remove and Install
Cab Roof Remove and Install
Seat Assembly Remove and Install
Seat Assembly Remove and Install
Mechanical Suspension Seat Disassemble and Assemble
Air Suspension Seat Disassemble and Assemble—If Equipped
R134a Refrigerant Cautions and Proper Handling
R134a Refrigerant Cautions and Proper Handling
R134a Refrigerant Oil Information
R134a Refrigerant Recovery, Recycling, and Charging Station Installation Procedure
Recover R134a Refrigerant
Flush and Purge Air Conditioning System
  Procedure Set-Up
  Condenser Flush and Purge
  Evaporator Flush and Purge
  Procedure Wrap-Up
Evacuate R134a System
Charge R134a System
Evaporator or Heater Core Remove and Install
Expansion Valve Remove and Install
Air Conditioner Freeze Control Switch Remove and Install
Receiver-Dryer Remove and Install
Blower Mode Door Motor Remove and Install
Condenser Remove and Install
Compressor Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Section 19: Sheet Metal and Styling
  Group 1910: Hood or Engine Enclosure
    Hood and Engine Enclosure Remove and Install
  Group 1913: Miscellaneous Shields
    Battery Box Remove and Install
Hood and Engine Enclosure Remove and Install
Hood and Engine Enclosure Remove and Install
Battery Box Remove and Install
  Dual Batteries
  Single Battery
Battery Box Remove and Install
  Dual Batteries
  Single Battery
Section 20: Safety and Convenience
  Group 2001: Radio
    Radio and Speakers Remove and Install
  Group 2004: Horn and Warning Devices
    Backup Alarm Volume Adjustment
Radio and Speakers Remove and Install
  Speakers
  Standard Radio Package
  Satellite Radio Package—If Equipped
Radio and Speakers Remove and Install
  Speakers
  Standard Radio Package
  Satellite Radio Package—If Equipped
Backup Alarm Volume Adjustment
Backup Alarm Volume Adjustment
Section 21: Main Hydraulic System
  Group 2160: Hydraulic System
    General Oil Cleanup Procedure
    Hydraulic Component Failure Cleanup Procedure
    Apply Vacuum to Hydraulic Oil Reservoir
    Hydraulic Pump Remove and Install
    Hydraulic Pump Disassemble and Assemble
    Hydraulic Reservoir Remove and Install
    Hydraulic and Transmission Oil Coolers Remove and Install
    Hydraulic Filter Assembly Remove and Install
General Oil Cleanup Procedure
General Oil Cleanup Procedure
Hydraulic Component Failure Cleanup Procedure
Apply Vacuum to Hydraulic Oil Reservoir
Hydraulic Pump Remove and Install
Hydraulic Pump Disassemble and Assemble
Hydraulic Reservoir Remove and Install
Hydraulic and Transmission Oil Coolers Remove and Install
  Lower Hydraulic Oil Cooler Remove
  Lower Hydraulic Oil Cooler Install
  Upper Hydraulic Oil Cooler Remove—If Equipped
  Upper Hydraulic Oil Cooler Install
  Transmission Oil Cooler Remove
  Transmission Oil Cooler Install
Hydraulic Filter Assembly Remove and Install
Section 31: Loader
  Group 3102: Bucket
    Loader Bucket Remove and Install
    Welded Bucket Cutting Edges Replacement Procedure
  Group 3104: Attachment Coupler
    Loader Coupler Remove and Install
    Loader Coupler Manifold Disassemble and Assemble
    Loader Coupler Cylinder Remove and Install
    Loader Coupler Cylinder Disassemble and Assemble
  Group 3115: Controls Linkage
    Loader Control Valve Linkage Remove and Install—Single Lever
    Loader Self-Leveling Linkage and Return-to-Dig Switch Adjustment
  Group 3140: Frames
    Loader Boom Remove and Install
    Loader Bucket Linkage Remove and Install
  Group 3160: Hydraulic System
    Loader and Stabilizer Control Valve Remove and Install
    Loader and Stabilizer Control Valve Spool Disassemble and Assemble
    Loader and Stabilizer Relief Valves Remove and Install
    Loader and Stabilizer System Relief Valve Disassemble and Assemble
    Loader Boom Anticavitation Check Valve Disassemble and Assemble
    Loader Boom Raise and Bucket Curl Circuit Relief Valve Disassemble and Assemble
    Loader Bucket Dump Circuit Relief Valve With Anticavitation Disassemble and Assemble
    Loader Auxiliary Circuit Relief Valve Disassemble and Assemble—If Equipped
    Loader Auxiliary Shutoff Plug Disassemble and Assemble
    Loader Auxiliary Manifold Remove and Install
    Loader Auxiliary Accumulator Remove and Install—If Equipped
    Loader Boom Cylinder Remove and Install
    Loader Bucket Cylinder Remove and Install
    Loader Cylinders Disassemble and Assemble
    Ride Control Valve Remove and Install
    Ride Control Valve Disassemble and Assemble
    Ride Control Accumulator Remove and Install
    Ride Control Valve Solenoid Disassemble and Assemble
Loader Bucket Remove and Install
Loader Bucket Remove and Install
Welded Bucket Cutting Edges Replacement Procedure
Loader Coupler Remove and Install
Loader Coupler Remove and Install
Loader Coupler Manifold Disassemble and Assemble
Loader Coupler Cylinder Remove and Install
Loader Coupler Cylinder Disassemble and Assemble
Loader Control Valve Linkage Remove and Install—Single Lever
Loader Control Valve Linkage Remove and Install—Single Lever
Loader Self-Leveling Linkage and Return-to-Dig Switch Adjustment
Loader Boom Remove and Install
Loader Boom Remove and Install
Loader Bucket Linkage Remove and Install
Loader and Stabilizer Control Valve Remove and Install
Loader and Stabilizer Control Valve Remove and Install
Loader and Stabilizer Control Valve Spool Disassemble and Assemble
  Stabilizer Spool Disassemble and Assemble
  Boom Spool Disassemble and Assemble
  Bucket Spool Disassemble and Assemble
  Auxiliary Spool Disassemble and Assemble—If Equipped
Loader and Stabilizer Relief Valves Remove and Install
Loader and Stabilizer System Relief Valve Disassemble and Assemble
Loader Boom Anticavitation Check Valve Disassemble and Assemble
Loader Boom Raise and Bucket Curl Circuit Relief Valve Disassemble and Assemble
Loader Bucket Dump Circuit Relief Valve With Anticavitation Disassemble and Assemble
Loader Auxiliary Circuit Relief Valve Disassemble and Assemble—If Equipped
Loader Auxiliary Shutoff Plug Disassemble and Assemble
Loader Auxiliary Manifold Remove and Install
Loader Auxiliary Accumulator Remove and Install—If Equipped
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Loader Boom Cylinder Remove and Install
Loader Bucket Cylinder Remove and Install
Loader Cylinders Disassemble and Assemble
Ride Control Valve Remove and Install
Ride Control Valve Disassemble and Assemble
Ride Control Accumulator Remove and Install
Ride Control Valve Solenoid Disassemble and Assemble
Section 33: Backhoe
  Group 3302: Bucket
    Backhoe Bucket and Linkage Remove and Install
    Backhoe Bucket Tooth Tips Remove and Install
    Bucket Tooth Shank Remove and Install
    Backhoe Bucket Cutting Edge Remove and Install
  Group 3304: Attachment Coupler
    Hydraulic Backhoe Coupler Remove and Install
    Hydraulic Backhoe Coupler Disassemble and Assemble
    Hydraulic Backhoe Coupler Valve Manifold Remove and Install
    Hydraulic Backhoe Coupler Valve Manifold Disassemble and Assemble
  Group 3315: Control Linkage
    Backhoe Lever Linkage Remove and Install—Two Lever
    Backhoe Lever Linkage Disassemble and Assemble—Two Lever
    Backhoe Auxiliary Pedal Remove and Install—Fifth and Sixth Functions
    Backhoe Auxiliary Pedal Disassemble and Assemble—Fifth and Sixth Functions
    Backhoe Boom Lock Remove and Install
    Backhoe Boom Lock Lever Linkage Remove and Install
    Stabilizer Lever Linkage Remove and Install
    Backhoe Pilot Control Valve Remove and Install
    Backhoe Pilot Control Valve Disassemble and Assemble
    Backhoe Pilot Control Tower Remove and Install
    Backhoe Pilot Control Tower Disassemble and Assemble
  Group 3340: Frames
    Backhoe Boom Remove and Install
    Dipperstick Remove and Install
    Dipperstick Extension Remove and Install—If Equipped
    Swing Frame Remove and Install
  Group 3360: Hydraulic System
    Backhoe Control Valve Remove and Install
    Backhoe Control Valve Disassemble and Assemble
    Backhoe Control Valve Spool Seals Remove and Install
    Backhoe Control Valve Relief Valves Remove and Install
    Backhoe Inlet Section Disassemble and Assemble
    Backhoe Swing Section Disassemble and Assemble
    Backhoe Boom Section Disassemble and Assemble
    Backhoe Bucket Section Disassemble and Assemble
    Backhoe Crowd Section Disassemble and Assemble
    Backhoe Auxiliary and Extendable Dipperstick Section Disassemble and Assemble—If Equipped
    Backhoe Auxiliary Selective Flow Control Section Disassemble and Assemble—If Equipped
    Pilot Enable and Pattern Select (PEPS) Valve Remove and Install
    Pilot Enable and Pattern Select Valve Disassemble and Assemble
    Backhoe Swing Cylinder Remove and Install
    Backhoe Boom Cylinder Remove and Install
    Backhoe Bucket Cylinder Remove and Install
    Backhoe Crowd Cylinder Remove and Install
    Backhoe Extendable Dipperstick Cylinder Remove and Install
    Backhoe Stabilizer Cylinder Remove and Install
    Backhoe Cylinders Disassemble and Assemble
Backhoe Bucket and Linkage Remove and Install
Backhoe Bucket and Linkage Remove and Install
Backhoe Bucket Tooth Tips Remove and Install
Bucket Tooth Shank Remove and Install
Backhoe Bucket Cutting Edge Remove and Install
Hydraulic Backhoe Coupler Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Hydraulic Backhoe Coupler Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Hydraulic Backhoe Coupler Disassemble and Assemble
  DISASSEMBLE
  ASSEMBLE
Hydraulic Backhoe Coupler Valve Manifold Remove and Install
  MACHINE PREPARATION
  REMOVAL
  INSTALLATION
Hydraulic Backhoe Coupler Valve Manifold Disassemble and Assemble
Backhoe Lever Linkage Remove and Install—Two Lever
Backhoe Lever Linkage Remove and Install—Two Lever
Backhoe Lever Linkage Disassemble and Assemble—Two Lever
  Linkage Remove and Install
  Linkage Assembly Disassemble and Assemble
  Link Assembly Disassemble and Assemble
Backhoe Auxiliary Pedal Remove and Install—Fifth and Sixth Functions
  Manual Controls
  Pilot Controls
Backhoe Auxiliary Pedal Disassemble and Assemble—Fifth and Sixth Functions
  Manual Controls
  Pilot Controls
  Linkage Disassemble and Assemble
Backhoe Boom Lock Remove and Install
Backhoe Boom Lock Lever Linkage Remove and Install
  Manual Controls
  Pilot Controls
Stabilizer Lever Linkage Remove and Install
Backhoe Pilot Control Valve Remove and Install
Backhoe Pilot Control Valve Disassemble and Assemble
  Backhoe Pilot Control Valve Disassemble and Assemble (S.N. —303523)
  Backhoe Pilot Control Valve Disassemble and Assemble (S.N. 303524— )
Backhoe Pilot Control Tower Remove and Install
  Right Pilot Control Remove and Install
  Left Pilot Control Remove and Install
Backhoe Pilot Control Tower Disassemble and Assemble
  Right Pilot Control Tower Disassemble and Assemble (S.N. —303523)
  Left Pilot Control Tower Disassemble and Assemble (S.N. —303523)
  Right Pilot Control Tower Disassemble and Assemble (S.N. 303524— )
  Left Pilot Control Tower Disassemble and Assemble (S.N. 303524— )
Backhoe Boom Remove and Install
Backhoe Boom Remove and Install
Dipperstick Remove and Install
  Standard Dipperstick
  Extendable Dipperstick
Dipperstick Extension Remove and Install—If Equipped
Swing Frame Remove and Install
Backhoe Control Valve Remove and Install
  Manual Controls
  Pilot Controls
Backhoe Control Valve Remove and Install
  Manual Controls
  Pilot Controls
Backhoe Control Valve Disassemble and Assemble
Backhoe Control Valve Spool Seals Remove and Install
Backhoe Control Valve Relief Valves Remove and Install
Backhoe Inlet Section Disassemble and Assemble
  Inlet Section Disassemble and Assemble
  System Relief Valve Disassemble and Assemble
Backhoe Swing Section Disassemble and Assemble
  Backhoe Swing Section Disassemble and Assemble—Manual Controls
  Backhoe Swing Section Disassemble and Assemble—Pilot Controls
  Swing Circuit Relief Valve Disassemble and Assemble
Backhoe Boom Section Disassemble and Assemble
  Backhoe Boom Section Disassemble and Assemble—Manual Controls
  Backhoe Boom Section Disassemble and Assemble—Pilot Controls
  Relief Valve Disassemble and Assemble—With Anticavitation
  Relief Valve Disassemble and Assemble—No Anticavitation
Backhoe Bucket Section Disassemble and Assemble
  Bucket Section Disassemble and Assemble—Manual Controls
  Bucket Section Disassemble and Assemble—Pilot Controls
  Relief Valve Disassemble and Assemble
Backhoe Crowd Section Disassemble and Assemble
  Backhoe Crowd Section Disassemble and Assemble—Manual Controls
  Backhoe Crowd Section Disassemble and Assemble—Pilot Controls
  Relief Valve 22 mm (0.88 in.) Disassemble and Assemble
  Relief Valve 26 mm (1 in.) Disassemble and Assemble
Backhoe Auxiliary and Extendable Dipperstick Section Disassemble and Assemble—If Equipped
  Auxiliary Section Disassemble and Assemble
  Relief Valve Disassemble and Assemble
Backhoe Auxiliary Selective Flow Control Section Disassemble and Assemble—If Equipped
  Auxiliary Selective Flow Control Section Disassemble and Assemble
  Relief Valve Disassemble and Assemble
Pilot Enable and Pattern Select (PEPS) Valve Remove and Install
Pilot Enable and Pattern Select Valve Disassemble and Assemble
Backhoe Swing Cylinder Remove and Install
  REMOVAL
  INSTALLATION
Backhoe Boom Cylinder Remove and Install
Backhoe Bucket Cylinder Remove and Install
  Machine Preparation
  Additional Information
Backhoe Crowd Cylinder Remove and Install
Backhoe Extendable Dipperstick Cylinder Remove and Install
Backhoe Stabilizer Cylinder Remove and Install
Backhoe Cylinders Disassemble and Assemble
Section 38: Grapple
  Group 3800: Removal and Installation
    Hydraulic Thumb Remove and Install—If Equipped
  Group 3860: Hydraulic System
    Hydraulic Thumb Cylinder Remove and Install—If Equipped
    Hydraulic Thumb Cylinder Disassemble and Assemble—If Equipped
Hydraulic Thumb Remove and Install—If Equipped
Hydraulic Thumb Remove and Install—If Equipped
Hydraulic Thumb Cylinder Remove and Install—If Equipped
Hydraulic Thumb Cylinder Remove and Install—If Equipped
Hydraulic Thumb Cylinder Disassemble and Assemble—If Equipped
Section 99: Dealer Fabricated Tools
  Group 9900: Dealer Fabricated Tools
    DFT1380 Lift Bracket
    DFT1285A Engine Support Bracket
    DFT1286 Backlash Measurement Tool
    DFT1163 MFWD Snap Ring Removal and Installation Tool
DFT1380 Lift Bracket
DFT1380 Lift Bracket
DFT1285A Engine Support Bracket
DFT1286 Backlash Measurement Tool
DFT1163 MFWD Snap Ring Removal and Installation Tool
tm13298x19 - 310SL Backhoe Loader Technical Manual  MAIN SECTIONNS
  Foreword
  Manual Identification—READ THIS FIRST!
  General Information
    Safety
    Torque Values
  Wheels
    Powered or Non-Powered Wheels and Fastenings
  Axles and Suspension Systems
    Input Drive Shafts and U-Joints
    Non-Powered Wheel Axles
    Powered Wheel Axle (MFWD)
    Axle Shaft, Bearings, and Reduction Gears
  Transmission
    Removal and Installation
    Gear, Shafts, and Power Shift Clutches
    Hydraulic System
  Engine
    Removal and Installation
  Engine Auxiliary System
    Cold Weather Starting Aids
    Cooling Systems
    Intake System
    Exhaust Systems
    External Fuel Supply Systems
  Torque Converter
    Turbine, Gears, and Shaft
  Steering System
    Power Steering
    Power Steering Hydraulic System
  Service Brakes
    Active Elements
    Controls Linkage
    Hydraulic System
  Park Brake
    Active Elements
  Electrical System
    Remove and Install
    System Controls
  Frame or Supporting Structure
    Frame Installation
    Chassis Weights
  Operator's Station
    Removal and Installation
    Operator Enclosure
    Seat and Seat Belt
    Heating and Air Conditioning
  Sheet Metal and Styling
    Hood or Engine Enclosure
    Miscellaneous Shields
  Safety and Convenience
    Radio
    Horn and Warning Devices
  Main Hydraulic System
    Hydraulic System
  Loader
    Bucket
    Attachment Coupler
    Controls Linkage
    Frames
    Hydraulic System
  Backhoe
    Bucket
    Attachment Coupler
    Control Linkage
    Frames
    Hydraulic System
  Grapple
    Removal and Installation
    Hydraulic System
  Dealer Fabricated Tools
    Dealer Fabricated Tools

John Deere 310SL Backhoe Loader Workshop Service Repair Manual (TM13298X19)


Use Promo Code 10POFF for additional 10% off discount (valid for Credit/Debit Card payments only).

Due to the continuous Paypal fee hikes, Paypal users, to bear the final burden of Paypal taxation, will be charged for additional 10% fee instead of 10% discount. Please avoid Paypal if possible!

Instant Download feature not available for orders paid with Paypal.