John Deere 310SJ and 410J Backhoe Loader with Total Machine Control (TMC) (S.N. 161703— ) Workshop Service Repair manual with Electrical Wiring Diagrams (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnosis & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

John Deere 310SJ and 410J Backhoe Loader with Total Machine Control (TMC) (S.N. 161703— ) manual contains high quality images, circuit diagrams, instructions to help you to maintenance, troubleshoot, diagnose, and repair. This document is printable, without restrictions, contains searchable text, bookmarks, crosslinks for easy navigation.

TM10852 (20MAY19) - John Deere 310SJ and 410J Backhoe Loader with Total Machine Control (TMC) (S.N. 161703— ) Technical Manual (Operation & Test Manual).pdf
TM10852 - John Deere 310SJ and 410J Backhoe Loader with Total Machine Control (TMC) (S.N. 161703— ) Technical Manual (Operation & Test Manual).epub

TABLE OF CONTENTS / FILE LIST:
Contents................5
  General Information................7
    Safety Information................9
      Recognize Safety Information................9
      Follow Safety Instructions................9
      Operate Only If Qualified................9
      Wear Protective Equipment................10
      Avoid Unauthorized Machine Modifications................10
      Inspect Machine................10
      Stay Clear of Moving Parts................10
      Avoid High-Pressure Oils................11
      Avoid High-Pressure Fluids................11
      Beware of Exhaust Fumes................12
      Prevent Fires................12
      Prevent Battery Explosions................12
      Handle Chemical Products Safely................13
      Dispose of Waste Properly................13
      Prepare for Emergencies................13
      Use Steps and Handholds Correctly................13
      Start Only From Operator's Seat................14
      Use and Maintain Seat Belt................14
      Prevent Unintended Machine Movement................14
      Prevent Unintended Machine Movement—If Equipped With Pilot Controls................14
      Avoid Work Site Hazards................15
      Keep Riders Off Machine................15
      Avoid Backover Accidents................16
      Avoid Machine Tipover................16
      Add and Operate Attachments Safely................16
      Use Special Care When Operating................17
      Operating or Traveling On Public Roads................17
      Inspect and Maintain ROPS................17
      Prevent Unintended Detonation of Explosive Devices................18
      Park and Prepare for Service Safely................18
      Service Cooling System Safely................18
      Remove Paint Before Welding or Heating................19
      Make Welding Repairs Safely................19
      Drive Metal Pins Safely................19
      Service Tires Safely................20
  Diagnostics................44
    Engine Control Unit (ECU)................45
      Engine Control Unit (ECU) Diagnostic Trouble Codes................45
      000029.03 — Engine Speed Control Short Circuit................45
        Engine Speed Control Short Circuit Diagnostic Procedure................45
      000029.04 — Engine Speed Control Open Circuit................46
        Engine Speed Control Open Circuit Diagnostic Procedure................47
      000091.03 — Foot Throttle Position Sensor Short Circuit................47
        Foot Throttle Position Sensor Short Circuit Diagnostic Procedure................48
      000091.04 — Foot Throttle Position Sensor Open Circuit................49
        Foot Throttle Position Sensor Open Circuit Diagnostic Procedure................49
      000091.14 — Foot Throttle Position Sensor Out of Range................50
        Foot Throttle Position Sensor Out of Range Diagnostic Procedure................50
      001075.05 — Fuel Lift Pump Relay Open Circuit................51
        Fuel Lift Pump Relay Open Circuit................51
      001075.06 — Fuel Lift Pump Relay Short Circuit ................52
        Fuel Lift Pump Relay Short Circuit Diagnostic Procedure................52
      001321.05 — Starter Relay Open Circuit................53
        Starter Relay Open Circuit Diagnostic Procedure................53
      001321.06 — Starter Relay Short Circuit................54
        Starter Relay Short Circuit Diagnostic Procedure................54
      001321.16 — Crank Cycle Too Long................55
        Crank Cycle Too Long Diagnostic Procedure................55
      002023.09 — Hand Throttle Message Missing (Landscape Loader Only)................55
      002047.09 — Can Communication Lost with FLC................56
        Can Communication Lost with FLC Diagnostic Procedure................56
      002071.09 — Hand Throttle Message Missing (Backhoe Only)................57
        Hand Throttle Message Missing (Backhoe Only) Diagnostic Procedure................57
      523702.09 — Flex Power Message Missing................58
        Flex Power Message Missing Diagnostic Procedure................58
    Flex Load Controller (FLC)................61
      Flex Load Controller (FLC) Diagnostic Trouble Codes................61
      000069.07 — MFWD Logic Error................61
        000069.07—MFWD Logic Error Diagnostic Procedure................61
      000070.02 — Park Brake Switch (S7) Open Circuit................61
        000070.02—Park Brake Switch (S7) Open Circuit Diagnostic Procedure................61
      000070.04 — Park Brake Switch (S7) Short to Ground................62
        000070.04—Park Brake Switch (S7) Short to Ground Diagnostic Procedure................62
      000070.07 — Park Brake Switch (S7) Logic Error................63
        000070.07—Park Brake Switch (S7) Logic Error Diagnostic Procedure................63
      000117.19 — Service Brake Pressure Low................64
        000117.19—Service Brake Pressure Low Diagnostic Procedure................64
      000234.02 — Software Revision Mismatch................64
        000234.02—Software Revision Mismatch Diagnostic Procedure................64
      000237.02 — Model Number in Vehicle Identification Number Not Valid................65
      000525.03 — TCL/Range Switch (S5) Gear Range Input Shorted to Power................65
        000525.03—TCL/Range Switch (S5) Gear Range Input Shorted to Power Diagnostic Procedure................65
      000525.04 — TCL/Range Switch (S5) Gear Range Input Voltage Low................66
        000525.04—TCL/Range Switch (S5) Gear Range Input Voltage Low Diagnostic Procedure................66
      000525.05 — TCL/Range Switch (S5) Gear Range Input Open Circuit................67
        000525.05—TCL/Range Switch (S5) Gear Range Input Open Circuit Diagnostic Procedure................67
      000525.12 — TCL/Range Switch (S5) Gear Range Input Logic Error................68
        000525.12—TCL/Range Switch (S5) Gear Range Input Logic Error Diagnostic Procedure................68
      000629.12 — FLC Watchdog Timeout................72
      000734.05 — Transmission Solenoid (Y1) Open Circuit................72
        Transmission Solenoid (Y1) Open Circuit Diagnostic Procedure................72
      000735.05 — Transmission Solenoid (Y2) Open Circuit................73
        Transmission Solenoid (Y2) Open Circuit Diagnostic Procedure................73
      000736.05 — Transmission Solenoid (Y3) Open Circuit................74
        Transmission Solenoid (Y3) Open Circuit Diagnostic Procedure................74
      000737.12 — Transmission Solenoid (Y4 or Y5) Fault................75
        000737.12—Transmission Solenoid (Y4 or Y5) Fault Diagnostic Procedure................75
      000738.05 — Transmission Solenoid (Y5) Open Circuit................76
        Transmission Solenoid (Y5) Open Circuit Diagnostic Procedure................76
      000739.12 — Transmission Solenoid (Y2 or Y6) Fault................77
        000739.12—Transmission Solenoid (Y2 or Y6) Fault Diagnostic Procedure................77
      000741.12 — Transmission Solenoid (Y1 or Y3) Fault................77
        000741.12—Transmission Solenoid (Y1 or Y3) Fault................78
      000746.07 — Differential Lock Switch (S4) Logic Error................78
        Differential Lock Switch (S4) Logic Error Diagnostic Procedure................78
      000746.12 — Differential Lock System Faults................79
        Differential Lock Diagnostic Procedure................79
      000757.05 — Transmission Solenoid (Y4) Open Circuit................80
        Transmission Solenoid (Y4) Open Circuit Diagnostic Procedure................80
      000759.05 — Transmission Solenoid (Y6) Open Circuit................81
        Transmission Solenoid (Y6) Open Circuit Diagnostic Procedure................81
      001504.05 — Seat Swivel Latch Switch (S18) Short to Ground................82
        001504.05—Seat Swivel Latch Switch (S18) Short to Ground Diagnostic Procedure................82
      001714.04 — Seat Position Front Switch (S17) Short to Ground................83
        Seat Position Front Switch (S17) Short to Ground Diagnostic Procedure................83
      001714.07 — Seat Position Rear Switch (S16) and Seat Position Front Switch (S17) Logic Mismatch................84
        001714.07—Seat Position Rear Switch (S16) and Seat Position Front Switch (S17) Logic Mismatch Diagnostic Procedure................84
      001714.10 — Seat Position Front Switch (S17) Short Circuit to Power or Stuck Closed................85
        001714.10—Seat Position Front Switch (S17) Short Circuit to Power or Stuck Closed................85
      001715.04 — Seat Position Rear Switch (S16) Short to Ground................86
        Seat Position Rear Switch (S16) Short to Ground Diagnostic Procedure................86
      002000.09 — CAN Communication Lost with ECU................87
        No CAN From ECU Diagnostic Procedure—Stage II Engine................87
        No CAN From ECU Diagnostic Procedure—Tier 3 Engine................90
      002023.09 — CAN Communication Lost with SDM................93
        002023.09—CAN Communication Lost with SDM Diagnostic Procedure................93
      002228.09 — CAN Communication Lost with FHC................94
        CAN Communication Lost with FHC Diagnostic Procedure................94
      002368.12 — Left Turn Signal Driver Output Fault................95
        002368.12—Left Turn Signal Driver Output Fault Diagnostic Procedure................95
      002370.12 — Right Turn Signal Driver Output Fault................96
        002370.12—Right Turn Signal Driver Output Fault Diagnostic Procedure................96
      002580.07 — Service Brake Pressure Switch Status Error................97
        002580.07—Service Brake Pressure Switch Status Error Diagnostic Procedure.................97
      002605.12 — Brake Charge Solenoid (Y59) Circuit Fault................98
        Brake Charge Solenoid (Y59) Circuit Fault Diagnostic Procedure................98
      002875.04 — 4-Way Flasher Switch (S31) Input Short to Ground................100
        002875.04—4-Way Flasher Switch (S31) Input Short to Ground Diagnostic Procedure................100
      002876.12 — Conflicting Turn Signal Switch (S30) Data................101
        002876.12—Turn Signal Switch (S30) Input Logic Error Diagnostic Procedure................101
      003413.04 — Right Door Switch (S99) Input Short to Ground................102
        003413.04—Right Door Switch (S99) Input Short to Ground Diagnostic Procedure................102
      003416.03 — Right Exit Switch (S99) Circuits Short to Power................103
        Right Exit Switch (S99) Circuits Short to Power Diagnostic Procedure................103
      003416.04 — Right Exit Switch (S99) Circuits Short to Ground................104
        Right Exit Switch (S99) Circuits Short to Ground Diagnostic Procedure................104
      003416.05 — Right Exit Switch (S99) Open Circuit................104
        Right Exit Switch (S99) Open Circuit Diagnostic Procedure................105
      298816.14 — Park Brake Did Not Apply When Commanded................105
        298816.14—Park Brake Did Not Apply When Commanded Diagnostic Procedure................105
      522371.04 — FLC Valve Power #5 Voltage Low................106
        522371.04—FLC Valve Power #5 Voltage Low Diagnostic Procedure................106
      522379.12 — Park Brake Release Solenoid (Y7) Fault................107
        522379.12—Park Brake Release Solenoid (Y7) Fault Diagnostic Procedure................107
      522398.14 — Park Brake Did Not Release When Commanded................108
        522398.14—Park Brake Did Not Release When Commanded Diagnostic Procedure................108
      522411.03 — TCL/Range Switch (S5) Input Voltage High................109
        522411.03—TCL/Range Switch (S5) Input Voltage High Diagnostic Procedure................109
      522411.04 — TCL/Range Switch (S5) Input Voltage Low................110
        522411.04—TCL/Range Switch (S5) Input Voltage Low Diagnostic Procedure................110
      522411.05 — TCL/Range Switch (S5) TCL Input Open Circuit................110
        522411.05—TCL/Range Switch (S5) TCL Input Open Circuit Diagnostic Procedure................110
      523218.03 — FLC Valve Power #2 Output Stuck ON................111
        523218.03—FLC Valve Power #2 Output Stuck ON Diagnostic Procedure................111
      523218.04 — FLC Valve Power #2 Output Stuck OFF................111
        523218.04—FLC Valve Power #2 Output Stuck OFF Diagnostic Procedure................111
      523218.05 — FLC Valve Power #2 Output Voltage Low................112
        523218.05—FLC Valve Power #2 Output Voltage Low Diagnostic Procedure................112
      523219.04 — FLC Valve Power #1 Voltage Low................113
        523219.04—FLC Valve Power #1 Voltage Low Diagnostic Procedure................113
      523702.02 — Flex Power Status Erratic................113
        Flex Power Status Erratic Diagnostic Procedure................113
      523702.07 — Flex Power Not Active................115
        Flex Power Not Active Diagnostic Procedure................115
      523702.08 — Flex Power Time Out................117
        Flex Power Time Out Diagnostic Procedure................117
      523702.09 — Flex Power ECU Authentication Error................118
        Flex Power ECU Authentication Error Diagnostic Procedure................119
      523702.13 — Flex Power Mismatch................120
        Flex Power Mismatch Diagnostic Procedure................120
      523702.10 — Flex Power Watch Dog Error................121
        Flex Power Watch Dog Error Diagnostic Procedure................121
      523911.12 — Hydraulic Pump Control Solenoid (Y56) Fault................121
        523911.12—Hydraulic Pump Control Solenoid (Y56) Fault................121
      523948.12 — Ride Control Solenoid 1 (Y50) or 2 (Y51) Fault................122
        523948.12—Ride Control Solenoid 1 (Y50) or 2 (Y51) Fault Diagnostic Procedure................122
      524070.04 — Valve Power # 6 Voltage Low................122
        524070.04—Valve Power # 6 Voltage Low Diagnostic Procedure................123
      524075.04 — Valve Power # 5 Voltage Low................123
        524075.04—Valve Power # 5 Voltage Low Diagnostic Procedure................123
      524172.00 — Clutch Disconnect Switch Stuck Closed................124
        524172.00—Clutch Disconnect Switch Stuck Closed Diagnostic Procedure.................124
      524172.04 — Switch Short to Ground................125
        524172.04—Clutch Disconnect Switch (S6) Shorted to GND Diagnostic Procedure.................125
      524172.07 — Clutch Disconnect Device Fault................126
        524172.07—Clutch Disconnect Device Fault Diagnostic Procedure.................126
      524235.12 — MFWD Solenoid (Y11) Output Fault................127
        524235.12—MFWD Solenoid (Y11) Output Fault Diagnostic Procedure................127
    Standard Display Monitor (SDM)................129
      Standard Display Monitor (SDM) Diagnostic Trouble Codes................129
      000096.03 — Fuel Level Sensor (B8) Input Voltage Low................129
        000096.03—Fuel Level Sensor (B8) Input Voltage Low Diagnostic Procedure................129
      000096.04 — Fuel Level Sensor (B8) Input Voltage High................130
        000096.04—Fuel Level Sensor (B8) Input Voltage High Diagnostic Procedure................130
      000100.01 — Engine Oil Pressure Low................130
        000100.01—Engine Oil Pressure Low Diagnostic Procedure................130
      000100.05 — Engine Oil Pressure Switch Open................131
        Engine Oil Pressure Switch Open Diagnostic Procedure................131
      000107.00 — Engine Air Filter Restricted................132
        000107.00—Engine Air Filter Restricted Diagnostic Procedure................132
      000117.01 — Service Brake Pressure Low................132
        000117.00—Service Brake Pressure Low Diagnostic Procedure................132
      000158.00 — System Voltage High................133
        000158.00—System Voltage High Diagnostic Procedure................133
      000158.01 — System Voltage Low................134
        000158.01—System Voltage Low Diagnostic Procedure................134
      000177.00 — Torque Converter Oil Temperature High................135
        000177.00—Torque Converter Oil Temperature High Diagnostic Procedure................135
      000177.03 — Torque Converter Oil Temperature Sensor (B6) Input Voltage High................135
        000177.03—Torque Converter Oil Temperature Sensor (B6) Input Voltage High Diagnostic Procedure................135
      000177.04 — Torque Converter Oil Temperature Sensor (B6) Input Voltage Low................136
        000177.04—Torque Converter Oil Temperature Sensor (B6) Input Voltage Low Diagnostic Procedure................136
      000234.02 — Software Revision Mismatch................137
        000234.02—Software Revision Mismatch Diagnostic Procedure................137
      000629.02 — No CAN from ECU................137
        No CAN From ECU Diagnostic Procedure................137
      000920.03 — SDM Alarm (H2) Output Voltage High................138
        000920.03—SDM Alarm (H2) Output Voltage High Diagnostic Procedure................138
      000920.04 — SDM Alarm (H2) Output Voltage Low................139
        000920.04—SDM Alarm (H2) Output Voltage Low Diagnostic Procedure................139
      001196.11 — Antitheft Lock Status Not Detected From ECU................140
        Antitheft Lock Status Not Detected From ECU Diagnostic Procedure................140
      001201.11 — Antitheft Unlock Status Not Detected From ECU................140
        Antitheft Unlock Status Not Detected From ECU Diagnostic Procedure................140
      001508.00 — Hydraulic Oil Temperature Moderately High................141
        001508.00—Hydraulic Oil Temperature Moderately High Diagnostic Procedure................141
      001508.03 — Hydraulic Oil Temperature Sensor (B10) Input Voltage High................141
        001508.03—Hydraulic Oil Temperature Sensor (B10) Input Voltage High Diagnostic Procedure................141
      001508.04 — Hydraulic Oil Temperature Sensor (B10) Input Voltage Low................142
        001508.04—Hydraulic Oil Temperature Sensor (B10) Input Voltage Low Diagnostic Procedure................142
      001508.16 — Hydraulic Oil Temperature High................143
        001508.16—Hydraulic Oil Temperature High Diagnostic Procedure................143
      001713.00 — Hydraulic Oil Filter Restricted................143
        001713.00—Hydraulic Oil Filter Restricted Diagnostic Procedure................144
      002003.09 — CAN Communication Lost with FLC................145
        002003.09—CAN Communication Lost with SDM Diagnostic Procedure................145
      002000.09 — CAN Communication Lost with ECU................145
        No CAN From ECU Diagnostic Procedure—Stage II Engine................145
        No CAN From ECU Diagnostic Procedure—Tier 3 Engine................148
      002000.12 — No CAN from ECU................151
        No CAN From ECU Diagnostic Procedure................151
      002228.09 — CAN Communication Lost with FHC................152
        CAN Communication Lost with FHC Diagnostic Procedure................152
      002071.09 — CAN Communication Lost with Other Controller................153
        002071.09—CAN Communication Lost with Other Controller Diagnostic Procedure................153
      298887.13 — SDM/ECU Model Number Mismatch................154
        298887.13—SDM/ECU Model Number Mismatch Diagnostic Procedure................154
      523569.04 — FLC Switched and/or Unswitched Power Open Circuit................154
        FLC Switched and/or Unswitched Power Open Circuit Diagnostic Procedure................154
      523662.04 — FHC Valve Power Circuit Voltages Low................156
        FHC Valve Power Circuit Voltages Low Diagnostic Procedure................156
      523649.04 — CAN Communication Lost with Hydraulic Controllers................158
        CAN Communication Lost with Hydraulic Controllers Diagnostic Procedure................158
      523650.04 — CAN Communication Lost with FHC................159
        CAN Communication Lost with FHC Diagnostic Procedure................159
      523653.04 — Gear Selection/Transmission Direction Circuit Voltages Low................160
        Gear Selection/Transmission Direction Circuit Voltages Low Diagnostic Procedure................160
      523665.04 — FLC Valve Power 1 Input Voltage Low................161
        FLC Valve Power 1 Input Voltage Low Diagnostic Procedure................161
      523666.04 — FLC Switched Power Voltage Open Circuit................162
        FLC Switched Power Voltage Open Circuit Diagnostic Procedure................162
    Flex Hydraulic Controller (FHC)................165
      Flex Hydraulic Controller (FHC) Diagnostic Trouble Codes................165
      000237.02 — Model Number in Vehicle Identification Number Not Valid................165
      000234.02 — Software Revision Mismatch................165
        000234.02—Software Revision Mismatch Diagnostic Procedure................165
      000629.12 — FHC Watchdog Timeout................165
      000630.13 — Loader Boom Position Sensor (B73) and Bucket Postion Sensor (B75) Calibration Required................165
      001764.07 — Hydraulic Enable Switch (S70) Logic Error................166
        001764.07—Hydraulic Enable Switch (S70) Logic Error Diagnostic Procedure................166
      001903.13 — Invalid Calibration Data Received from ISP for Left Stabilizer Raise Solenoid................166
        Invalid Calibration Data Received from ISP for Left Stabilizer Raise Solenoid Diagnostic Procedure................166
      001910.13 — Invalid Calibration Data Received from ISP for Left Stabilizer Lower Solenoid................167
        Invalid Calibration Data Received from ISP for Left Stabilizer Lower Solenoid Diagnostic Procedure................167
      001927.13 — Invalid Calibration Data Received from ISP for Right Stabilizer Raise Solenoid................168
        Invalid Calibration Data Received from ISP for Right Stabilizer Raise Solenoid Diagnostic Procedure................168
      001951.13 — Invalid Calibration Data Received from ISP for Right Stabilizer Lower Solenoid................168
        Invalid Calibration Data Received from ISP for Right Stabilizer Lower Solenoid Diagnostic Procedure................168
      001963.13 — Invalid Calibration Data Received from ISP for Loader Auxiliary Positive Solenoid................169
        Invalid Calibration Data Received from ISP for Loader Auxiliary Positive Solenoid Diagnostic Procedure................169
      001975.13 — Invalid Calibration Data Received from ISP for Loader Auxiliary Reverse Solenoid................169
        Invalid Calibration Data Received from ISP for Loader Auxiliary Reverse Solenoid Diagnostic Procedure................170
      001987.13 — Invalid Calibration Data Received from ISP for Backhoe Auxiliary Positive Solenoid................170
        Invalid Calibration Data Received from ISP for Backhoe Auxiliary Positive Solenoid Diagnostic Procedure................170
      001999.13 — Invalid Calibration Data Received from ISP for Backhoe Auxiliary Reverse Solenoid................171
        Invalid Calibration Data Received from ISP for Backhoe Auxiliary Reverse Solenoid Diagnostic Procedure................171
      002140.09 — CAN Communication Lost between the FHC and Other Controllers................171
        002140.09—CAN Communication Lost between the FHC and Other Controllers Diagnostic Procedure................171
      002160.09 — No CAN from ISP................172
        No CAN from ISP Diagnostic Procedure................172
      002161.09 — No CAN from SWX................174
        No CAN from SWX Diagnostic Procedure................174
      002162.09 — No CAN from BOM................176
        No CAN from BOM Diagnostic Procedure................176
      002163.09 — No CAN from CWD................178
        No CAN from CWD Diagnostic Procedure................178
      002164.09 — No CAN from BUK................180
        No CAN from BUK Diagnostic Procedure................180
      002165.09 — No CAN from HAM................182
        No CAN from HAM Diagnostic Procedure................182
      002213.09 — No CAN from JSR................184
        No CAN from JSR Diagnostic Procedure................184
      002201.09 — No CAN from JSL................185
        No CAN from JSL Diagnostic Procedure................185
      002267.13 — Invalid Calibration Data Received from ISP for Loader Boom Lower Solenoid................186
        Invalid Calibration Data Received from ISP for Loader Boom Lower Solenoid Diagnostic Procedure................187
      002279.13 — Invalid Calibration Data Received from ISP for Loader Boom Raise Solenoid................187
        Invalid Calibration Data Received from ISP for Loader Boom Raise Solenoid Diagnostic Procedure................187
      002291.13 — Invalid Calibration Data Received from ISP for Loader Bucket Dump Currents................188
        Invalid Calibration Data Received from ISP for Loader Bucket Dump Currents Diagnostic Procedure................188
      002303.13 — Invalid Calibration Data Received from ISP for Loader Bucket Curl Solenoid................188
        Invalid Calibration Data Received from ISP for Loader Bucket Curl Solenoid Diagnostic Procedure................189
      002660.07 — Right Joystick X-Axis Logic Error................189
        002660.07—Right Joystick X-Axis Logic Error Diagnostic Procedure................189
      002661.07 — Right Joystick Y-Axis Logic Error................189
        002661.07—Right Joystick Y-Axis Logic Error Diagnostic Procedure................189
      002662.07 — Secondary Loader Joystick (S80) X-Axis Logic Error................190
        002662.07—Secondary Loader Joystick X-Axis Logic Error Diagnostic Procedure................190
      002663.07 — Secondary Loader Joystick (S80) Y-Axis Logic Error................190
        002663.07—Secondary Loader Joystick Y-Axis Logic Error Diagnostic Procedure................190
      002664.07 — Loader Auxiliary Hydraulics Control Logic Error................190
        002664.07—Loader Auxiliary Hydraulics Control Logic Error Diagnostic Procedure................190
      002697.07 — Left Joystick X-Axis Logic Error................191
        002697.07—Left Joystick X-Axis Logic Error Diagnostic Procedure................191
      002698.07 — Left Joystick Y-Axis Logic Error................191
        002698.07—Left Joystick Y-Axis Logic Error Diagnostic Procedure................191
      002699.07 — Left Joystick Auxiliary Control Switch (S81) Logic Error................191
        002699.07—Left Joystick Auxiliary Control Switch (S81) Logic Error Diagnostic Procedure................191
      002700.07 — Outer Stabilizer Control Switch (S72) Logic Error................192
        002700.07—Inner Stabilizer Control Switch Logic Error Diagnostic Procedure................192
      002701.07 — Inner Stabilizer Control Switch (S71) Logic Error................192
        002701.07—Outer Stabilizer Control Switch Logic Error Diagnostic Procedure................192
      002724.07 — Left Joystick Rocker Switch (S95) Logic Error................192
        002724.07—Left Joystick Rocker Switch (S95) Logic Error Diagnostic Procedure................193
      002858.07 — FHC Unable to Retrieve Stabilizer Valve Data From ISP................194
        002858.07—FHC Unable to Retrieve Stabilizer Valve Data From ISP Diagnostic Procedure................194
      002858.08 — FHC Unable to Retrieve Stabilizer Valve Data From ISP................195
        002858.08—FHC Unable to Retrieve Stabilizer Valve Data From ISP Diagnostic Procedure................195
      002858.13 — FHC Unable to Retrieve Stabilizer Valve Data From ISP................195
        002858.13—FHC Unable to Retrieve Stabilizer Valve Data From ISP Diagnostic Procedure................196
      522372.04 — Loader Advanced Features Sensor Fault................196
        522372.04—Loader Advanced Features Sensor Fault Diagnostic Procedure................196
      522372.07 — Loader Boom Position Sensor Error................197
        Loader Boom Position Sensor Error Diagnostic Procedure................197
      522377.03 — Loader Boom Position Sensor (B73) Input #1 Voltage High................197
        522377.03—Loader Boom Position Sensor (B73) Input #1 Voltage High Diagnostic Procedure................197
      522377.04 — Loader Boom Position Sensor (B73) Input #1 Voltage Low................198
        522377.04—Loader Boom Position Sensor (B73) Input #1 Voltage Low Diagnostic Procedure................198
      522377.12 — Loader Boom Position Sensor (B73) Logic Error................199
        522377.12—Loader Boom Position Sensor (B73) Logic Error Diagnostic Procedure................199
      522377.13 — Loader Boom Position Sensor (B73) Invalid Calibration................200
      522378.03 — Loader Boom Position Sensor (B73) Input #2 Voltage High................200
        522378.03—Loader Boom Position Sensor (B73) Input #2 Voltage High Diagnostic Procedure................200
      522378.04 — Loader Boom Position Sensor (B73) Input #2 Voltage Low................201
        522378.04—Loader Boom Position Sensor (B73) Input #2 Voltage Low Diagnostic Procedure................201
      522436.03 — Loader Bucket Position Sensor (B75) Input #1 Voltage High................201
        522436.03—Loader Bucket Position Sensor (B75) Input #1 Voltage High Diagnostic Procedure................202
      522436.04 — Loader Bucket Position Sensor (B75) Input #1 Voltage Low................202
        522436.04—Loader Bucket Position Sensor (B75) Input #1 Voltage Low Diagnostic Procedure................202
      522436.12 — Loader Bucket Position Sensor (B75) Logic Error................203
        522436.12—Loader Bucket Position Sensor (B75) Logic Error Diagnostic Procedure................203
      522436.13 — Loader Bucket Position Sensor (B75) Invalid Calibration................204
      522437.03 — Loader Bucket Position Sensor (B75) Input #2 Voltage High................204
        522437.03—Loader Bucket Position Sensor (B75) Input #2 Voltage High Diagnostic Procedure................204
      522437.04 — Loader Bucket Position Sensor (B75) Input #2 Voltage Low................205
        522437.04—Loader Bucket Position Sensor (B75) Input #2 Voltage Low Diagnostic Procedure................205
      522438.07 — Loader Bucket Position Sensor Error................206
        Loader Bucket Position Sensor Error Diagnostic Procedure................206
      523216.04 — Valve Power # 4 Voltage Low................206
        523216.04—Valve Power # 4 Voltage Low Diagnostic Procedure................206
      523217.04 — Valve Power # 3 Voltage Low................207
        523217.04—Valve Power # 3 Voltage Low Diagnostic Procedure................207
      523218.04 — Valve Power # 2 Voltage Low................208
        523218.04—Valve Power # 2 Voltage Low Diagnostic Procedure................208
      523219.04 — Valve Power # 1 Voltage Low................209
        523219.04—Valve Power # 1 Voltage Low Diagnostic Procedure................209
      523395.00 — Backhoe Swing Calibration System Pressure Not Detected................210
        Backhoe Swing Calibration System Pressure Not Detected Diagnostic Procedure................210
      523395.01 — Backhoe Swing Calibration Stall Pressure Low................210
        Backhoe Swing Calibration Stall Pressure Low Diagnostic Procedure................210
      523396.00 — Right Stabilizer Calibration System Pressure High................211
        Right Stabilizer Calibration System Pressure High Diagnostic Procedure................211
      523396.01 — Right Stabilizer Calibration Stall Pressure Low................212
        Right Stabilizer Calibration Stall Pressure Low Diagnostic Procedure................212
      523397.00 — Backhoe Auxiliary Calibration System Pressure High................213
        Backhoe Auxiliary Calibration System Pressure High Diagnostic Procedure................213
      523397.01 — Backhoe Auxiliary Calibration Stall Pressure Low................214
        Backhoe Auxiliary Stall Pressure Low Diagnostic Procedure................214
      523400.00 — Backhoe Extend Calibration System Pressure Not Detected................215
        Backhoe Extend Calibration System Pressure Not Detected Diagnostic Procedure................215
      523400.01 — Backhoe Extend Calibration Stall Pressure Low................215
        Backhoe Extend Calibration Stall Pressure Low Diagnostic Procedure................215
      523401.00 — Bucket Calibration System Pressure High................216
        Bucket Calibration System Pressure High Diagnostic Procedure................216
      523401.01 — Bucket Calibration Stall Pressure Low................217
        Bucket Calibration Stall Pressure Low Diagnostic Procedure................217
      523402.00 — Boom Calibration System Pressure High................218
        Boom Calibration System Pressure High Diagnostic Procedure................218
      523402.01 — Boom Calibration Stall Pressure Low................219
        Boom Calibration Stall Pressure Low Diagnostic Procedure................219
      523403.00 — Left Stabilizer Calibration System Pressure High................220
        Left Stabilizer Calibration System Pressure High Diagnostic Procedure................220
      523403.01 — Left Stabilizer Calibration Stall Pressure Low................220
        Left Stabilizer Calibration Stall Pressure Low Diagnostic Procedure................220
      523404.00 — Loader Auxiliary Calibration System Pressure High................221
        Loader Auxiliary Calibration System Pressure High Diagnostic Procedure................221
      523404.01 — Loader Auxiliary Calibration Stall Pressure Low................222
        Loader Auxiliary Calibration Stall Pressure Low Diagnostic Procedure................222
      523705.03 — Hydraulic Valve Power Stuck ON................223
        523705.03—Hydraulic Valve Power Stuck ON Diagnostic Procedure................223
      523705.04 — Hydraulic Valve Power Failure................224
        523705.04—Hydraulic Valve Power Failure Diagnostic Procedure................224
      523705.05 — Hydraulic Valve Power Stuck OFF................224
        523705.05—Hydraulic Valve Power Stuck OFF Diagnostic Procedure................225
      523930.05 — Loader Boom Magnitude Solenoid (Y73) Output Voltage Low................226
        523930.05—Loader Boom Magnitude Solenoid (Y73) Output Voltage Low Diagnostic Procedure................226
      523930.06 — Loader Boom Magnitude Solenoid (Y73) Output Voltage High................226
        523930.06—Loader Boom Magnitude Solenoid (Y73) Output Voltage High Diagnostic Procedure................226
      523931.05 — Loader Boom Direction Solenoid (Y74) Output Voltage Low................227
        523931.05—Loader Boom Direction Solenoid (Y74) Output Voltage Low Diagnostic Procedure................227
      523931.06 — Loader Boom Direction Solenoid (Y74) Output Voltage High................228
        523931.06—Loader Boom Direction Solenoid (Y74) Output Voltage High Diagnostic Procedure................228
      523932.05 — Loader Bucket Magnitude Solenoid (Y75) Output Voltage Low................228
        523932.05—Loader Bucket Magnitude Solenoid (Y75) Output Voltage Low Diagnostic Procedure................229
      523932.06 — Loader Bucket Magnitude Solenoid (Y75) Output Voltage High................229
        523932.06—Loader Bucket Magnitude Solenoid (Y75) Output Voltage High Diagnostic Procedure................229
      523933.05 — Loader Bucket Direction Solenoid (Y76) Output Voltage Low................230
        523933.05—Loader Bucket Direction Solenoid (Y76) Output Voltage Low Diagnostic Procedure................230
      523933.06 — Loader Bucket Direction Solenoid (Y76) Output Voltage High................230
        523933.06—Loader Bucket Direction Solenoid (Y76) Output Voltage High Diagnostic Procedure................231
      523934.05 — Left Stabilizer Raise Solenoid (Y78) Output Voltage Low................231
        523934.05—Left Stabilizer Raise Solenoid (Y78) Output Voltage Low Diagnostic Procedure................231
      523934.06 — Left Stabilizer Raise Solenoid (Y78) Output Voltage High................232
        523934.06—Left Stabilizer Raise Solenoid (Y78) Output Voltage High Diagnostic Procedure................232
      523935.05 — Left Stabilizer Lower Solenoid (Y77) Output Voltage Low................232
        523935.05—Left Stabilizer Lower Solenoid (Y77) Output Voltage Low Diagnostic Procedure................233
      523935.06 — Left Stabilizer Lower Solenoid (Y77) Output Voltage High................233
        523935.06—Left Stabilizer Lower Solenoid (Y77) Output Voltage High Diagnostic Procedure................233
      523936.05 — Right Stabilizer Raise Solenoid (Y80) Output Voltage Low................234
        523936.05—Right Stabilizer Raise Solenoid (Y80) Output Voltage Low Diagnostic Procedure................234
      523936.06 — Right Stabilizer Raise Solenoid (Y80) Output Voltage High................234
        523936.06—Right Stabilizer Raise Solenoid (Y80) Output Voltage High Diagnostic Procedure................235
      523937.05 — Right Stabilizer Lower Solenoid (Y79) Output Voltage Low................235
        523937.05—Right Stabilizer Lower Solenoid (Y79) Output Voltage Low Diagnostic Procedure................235
      523937.06 — Right Stabilizer Lower Solenoid (Y79) Output Voltage High................236
        523937.06—Right Stabilizer Lower Solenoid (Y79) Output Voltage High Diagnostic Procedure................236
      523938.05 — Loader Auxiliary Function Magnitude Solenoid (Y71) Output Voltage Low................237
        523938.05—Loader Auxiliary Function Magnitude Solenoid (Y71) Output Voltage Low Diagnostic Procedure................237
      523938.06 — Loader Auxiliary Function Magnitude Solenoid (Y71) Output Voltage High................237
        523938.06—Loader Auxiliary Function Magnitude Solenoid (Y71) Output Voltage High Diagnostic Procedure................237
      523939.05 — Loader Auxiliary Function Direction Solenoid (Y72) Output Voltage Low................238
        523939.05—Loader Auxiliary Function Direction Solenoid (Y72) Output Voltage Low Diagnostic Procedure................238
      523939.06 — Loader Auxiliary Function Direction Solenoid (Y72) Output Voltage High................239
        523939.06—Loader Auxiliary Function Direction Solenoid (Y72) Output Voltage High Diagnostic Procedure................239
      523940.05 — Backhoe Auxiliary Function Magnitude Solenoid (Y81) Output Voltage Low................240
        523940.05—Backhoe Auxiliary Function Magnitude Solenoid (Y81) Output Voltage Low Diagnostic Procedure................240
      523940.06 — Backhoe Auxiliary Function Magnitude Solenoid (Y81) Output Voltage High................240
        523940.06—Backhoe Auxiliary Function Magnitude Solenoid (Y81) Output Voltage High Diagnostic Procedure................240
      523941.05 — Backhoe Auxiliary Function Direction Solenoid (Y82) Output Voltage Low................241
        523941.05—Backhoe Auxiliary Function Direction Solenoid (Y82) Output Voltage Low Diagnostic Procedure................241
      523941.06 — Backhoe Auxiliary Function Direction Solenoid (Y82) Output Voltage High................242
        523941.06—Backhoe Auxiliary Function Direction Solenoid (Y82) Output Voltage High Diagnostic Procedure................242
    Intelligent System Planner (ISP)................245
      Intelligent System Planner (ISP) Diagnostic Trouble Codes................245
      000158.00 — Battery Voltage High................245
        000158.00—Battery Voltage High Diagnostic Procedure................245
      000158.17 — Battery Voltage Low................246
        000158.17—Battery Voltage Low Diagnostic Procedure................246
      000234.02 — Software Revision Mismatch................247
        Software Revision Mismatch Diagnostic Procedure................247
      000628.2 — Program Failed or Erratic Data................248
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................248
      000628.11 — Program Failed Device Fault................248
        000628.11—Program Failed Device Fault Diagnostic Procedure................248
      000628.12 — Program Failed Device Fault................249
        000628.12—Program Failed Device Fault Diagnostic Procedure................249
      000628.13 — Program Failed Calibration Error................249
        000628.13—Program Failed Calibration Error Diagnostic Procedure................249
      000701.05 — Coil 1 Open Circuit or Short to Ground ................249
        000701.05—Coil 1 Open Circuit or Short to Ground Diagnostic Procedure................250
      000701.06 — Coil 1 Short to Power................250
        000701.06—Coil 1 Short to Power Diagnostic Procedure................250
      000702.05 — Coil 2 Open Circuit or Short to Ground................250
        000702.05—Coil 2 Open Circuit or Short to Ground Diagnostic Procedure................250
      000702.06 — Coil 2 Short to Power................251
        000702.06—Coil 2 Short to Power Diagnostic Procedure................251
      000703.05 — Coil 3 Open Circuit or Short to Ground................252
        000703.05—Coil 3 Open Circuit or Short to Ground Diagnostic Procedure................252
      000703.06 — Coil 3 Short to Power................252
        000703.06—Coil 3 Short to Power Diagnostic Procedure................252
      000704.05 — Coil 4 Open Circuit or Short to Ground................253
        000704.05—Coil 4 Open Circuit or Short to Ground Diagnostic Procedure................253
      000704.06 — Coil 4 Short to Power................253
        000704.06—Coil 4 Short to Power Diagnostic Procedure................253
      000709.03 — Hydraulic Load Sense Pressure Sensor (B91) Open or Short Circuit................254
        000709.03—Hydraulic Load Sense Pressure Sensor (B91) Open or Short Circuit Diagnostic Procedure................254
      000709.04 — Hydraulic Load Sense Pressure Sensor (B91) Short to Ground................254
        000709.04—Hydraulic Load Sense Pressure Sensor (B91) Short to Ground Diagnostic Procedure................255
      000709.15 — Hydraulic Load Sense Pressure Out of Range High................255
        000709.15—Hydraulic Load Sense Pressure Out of Range High Diagnostic Procedure................255
      000710.03 — Hydraulic System Pressure Sensor (B90) Open or Short Circuit................255
        000710.03—Hydraulic System Pressure Sensor (B90) Open or Short Circuit Diagnostic Procedure................255
      000710.04 — Hydraulic System Pressure Sensor (B90) Short to Ground................256
        000710.04—Hydraulic System Pressure Sensor (B90) Short to Ground Diagnostic Procedure................256
      000710.15 — Hydraulic System Pressure Out of Range High................256
        000710.15—Hydraulic System Pressure Out of Range High Diagnostic Procedure................256
      000711.02 — ISP Temperature Sensors Out of Range................257
        000711.02—Intelligent System Planner (ISP)Temperature Sensors Out of Range Diagnostic Procedure................257
      000711.03 — Hydraulic Load Sense Temperature Sensor Open or Short Circuit................257
        000711.03—Hydraulic Load Sense Temperature Sensor Open or Short Circuit Diagnostic Procedure................257
      000711.04 — Hydraulic Load Sense Temperature Sensor Short to Ground................258
        000711.04—Hydraulic Load Sense Temperature Sensor Short to Ground Diagnostic Procedure................258
      000711.15 — Hydraulic Load Sense Temperature High................258
        000711.15—Hydraulic Load Sense Temperature High Diagnostic Procedure................258
      000711.16 — Hydraulic Load Sense Temperature Moderately High................258
        000711.16—Hydraulic Load Sense Temperature Moderately High Diagnostic Procedure................258
      000712.02 — Intelligent System Planner (ISP) Temperature Sensors Out of Range................259
        000712.02—Intelligent System Planner (ISP)Temperature Sensors Out of Range Diagnostic Procedure................259
      000712.03 — Hydraulic System Temperature Sensor Open or Short Circuit................259
        000712.03—Hydraulic System Temperature Sensor Open or Short Circuit Diagnostic Procedure................259
      000712.04 — Hydraulic System Temperature Sensor Short to Ground................259
        000712.04—Hydraulic System Temperature Sensor Short to Ground Diagnostic Procedure................260
      000712.15 — Hydraulic System Temperature High................260
        000712.15—Hydraulic System Temperature High Diagnostic Procedure................260
      000712.16 — Hydraulic System Temperature Moderately High................260
        000712.16—Hydraulic System Temperature Moderately High Diagnostic Procedure................260
      002839.02 — Function Wiring Identification Invalid................261
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................261
      002839.13 — Backhoe Controller Mismatch................261
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................261
      002839.14 — Coil Short to Ground................262
        Coil Short to Ground Diagnostic Procedure................262
    Left Joystick Controller (JSL)................263
      Left Joystick Controller (JSL) Diagnostic Trouble Codes................263
      000444.01 — Input Voltage Low................263
        000444.01—Input Voltage Low Diagnostic Procedure................263
      001043.02 — Reference Voltage Out of Tolerance................264
        001043.02—Reference Voltage Out of Tolerance Diagnostic Procedure................264
      002697.02 — X- or Y-Axis Sensors Conflict................264
        002697.02—X- or Y-Axis Sensors Conflict Diagnostic Procedure................264
      002697.03 — Left X-Axis Sensor Voltage High................264
        002697.03—Left X-Axis Sensor Voltage High Diagnostic Procedure................265
      002697.04 — Left X-Axis Sensor Voltage Low................265
        002697.04—Left X-Axis Sensor Voltage Low Diagnostic Procedure................265
      002697.13 — No Calibration File for Left Joystick................265
        002697.13—No Calibration File for Left Joystick Diagnostic Procedure................265
      002697.14 — X-Axis Sensor Redundancy Error................266
        002697.14—X-Axis Sensor Redundancy Error Diagnostic Procedure................266
      002698.02 — X- or Y-Axis Sensors Conflict................266
        002698.02—X- or Y-Axis Sensors Conflict Diagnostic Procedure................266
      002698.03 — Left Y-Axis Sensor Voltage High................266
        002698.03—Left Y-Axis Sensor Voltage High Diagnostic Procedure................266
      002698.04 — Left Y-Axis Sensor Voltage Low................267
        002698.04—Left Y-Axis Sensor Voltage Low Diagnostic Procedure................267
      002698.14 — Left Y-Axis Sensor Redundancy Error................267
        002698.14—Left Y-Axis Sensor Redundancy Error Diagnostic Procedure................267
      002699.03 — Left Joystick Auxiliary Control Switch (S81) Voltage High................268
        002699.03—Left Joystick Auxiliary Control Switch (S81) Voltage High Diagnostic Procedure................268
      002699.04 — Left Joystick Auxiliary Control Switch (S81) Voltage Low................268
        002699.04—Left Joystick Auxiliary Control Switch (S81) Voltage Low Diagnostic Procedure................268
      002699.13 — Left Joystick Auxiliary Control Switch (S81) Out of Neutral at Start Up................269
        002699.13—Left Joystick Auxiliary Control Switch (S81) Out of Neutral at Start Up Diagnostic Procedure................269
      002699.14 — Left Joystick Auxiliary Control Switch (S81) Redundancy Error................269
        002699.14—Left Joystick Auxiliary Control Switch (S81) Redundancy Error Diagnostic Procedure................269
      002700.03 — Outer Stabilizer Control Switch (S72) Input Voltage High................269
        002700.03—Outer Stabilizer Control Switch (S72) Input Voltage High Diagnostic Procedure................270
      002700.04 — Outer Stabilizer Control Switch (S72) Input Voltage Low................270
        002700.04—Outer Stabilizer Control Switch (S72) Input Voltage Low Diagnostic Procedure................270
      002700.13 — Outer Stabilizer Control Switch (S72) Not in Neutral at Start Up................271
        002700.13—Outer Stabilizer Control Switch (S72) Not in Neutral at Start Up Diagnostic Procedure................271
      002700.14 — Outer Stabilizer Control Switch (S72) Input Redundancy Error................272
        002700.14—Outer Stabilizer Control Switch (S72) Input Redundancy Error Diagnostic Procedure................272
      002701.03 — Inner Stabilizer Control Switch (S71) Input Voltage High................272
        002701.03—Inner Stabilizer Control Switch (S71) Input Voltage High Diagnostic Procedure................272
      002701.04 — Inner Stabilizer Control Switch (S71) Input Voltage Low................273
        002701.04—Inner Stabilizer Sensor Switch (S71) Input Voltage Low Diagnostic Procedure................273
      002701.13 — Inner Stabilizer Control Switch (S71) Not in Neutral at Start Up................274
        002701.13—Inner Stabilizer Control Switch (S71) Not in Neutral at Start Up Diagnostic Procedure................274
      002701.14 — Inner Stabilizer Control Switch (S71) Input Redundancy Error................275
        002701.14—Left Inner Stabilizer Control Switch (S71) Input Redundancy Error Diagnostic Procedure................275
      003509.02 — Supply Voltage Out of Tolerance................275
        003509.02—Supply Voltage Out of Tolerance................275
      003510.02 — Reference Voltage Out of Tolerance................276
        003510.02—Reference Voltage Out of Tolerance Diagnostic Procedure................276
      522431.12 — RAM Memory Check Failed................276
        522431.12—RAM Memory Check Failed................276
      523438.12 — Calibration Verification Failed................277
        523438.12—Calibration Verification Failed Diagnostic Procedure................277
      523455.12 — Temperature Sensor 2 Communication Failure................277
        523455.12—Temperature Sensor 2 Communication Failure Diagnostic Procedure................277
      524152.12 — Flash Image Error................277
        524152.12—Flash Image Error Diagnostic Procedure................278
      524259.00 — Temperature Sensor Out of Range High................278
        524259.00—Temperature Sensor Out of Range High Diagnostic Procedure................278
      524259.01 — Temperature Sensor Out of Range Low................278
        524259.01—Temperature Sensor Out of Range Low Diagnostic Procedure................278
      524259.09 — Temperature Sensor Communication Error................279
        524259.09—Temperature Sensor Communication Error Diagnostic Procedure................279
      524259.12 — Temperature Sensor 1 Communication Failure................279
        524259.12—Temperature Sensor 1 Communication Failure Diagnostic Procedure................279
      524259.14 — Temperature Sensor Data Mismatch................280
        524259.14—Temperature Sensor Data Mismatch Diagnostic Procedure................280
    Right Joystick Controller (JSR)................281
      Right Joystick Controller (JSR) Diagnostic Trouble Codes................281
      000444.01 — Input Voltage Low................281
        000444.01—Input Voltage Low Diagnostic Procedure................281
      001043.02 — Reference Voltage Out of Tolerance................282
        001043.02—Reference Voltage Out of Tolerance Diagnostic Procedure................282
      002660.02 — X- or Y-Axis Sensors Conflict................282
        002660.02—X- or Y-Axis Sensors Conflict Diagnostic Procedure................282
      002660.03 — Right X-Axis Sensor Voltage High................282
        002660.03—X-Axis Sensor Voltage High Diagnostic Procedure................283
      002660.04 — Right X-Axis Sensor Voltage Low................283
        002660.04—Right X-Axis Sensor Voltage Low Diagnostic Procedure................283
      002660.13 — No Calibration File for Right Joystick................283
        002660.13—No Calibration File for Right Joystick Diagnostic Procedure.................283
      002660.14 — Right X-Axis Sensor Redundancy Error................284
        002660.14—Right X-Axis Sensor Redundancy Error Diagnostic Procedure................284
      002661.02 — X- or Y-Axis Sensor Conflict................284
        002661.02—X- or Y-Axis Sensor Conflict Diagnostic Procedure................284
      002661.03 — Right Y-Axis Sensor Voltage High................284
        002661.03—Right Y-Axis Sensor Voltage High Diagnostic Procedure................284
      002661.04 — Right Y-Axis Sensor Voltage Low................285
        002661.04—Right Y-Axis Senor Voltage Low Diagnostic Procedure................285
      002661.14 — Right Y-Axis Sensor Redundancy Error................285
        002661.14—Right Y-Axis Sensor Redundancy Error Diagnostic Procedure................285
      002662.03 — Secondary Loader Joystick (S80) X-Axis Bucket Sensor Voltage High................285
        002662.03—Secondary Loader Joystick (S80) X-Axis Bucket Sensor Voltage High Diagnostic Procedure................286
      002662.04 — Secondary Loader Joystick (S80) X-Axis Bucket Sensor Voltage Low................286
        002662.04—Secondary Loader Joystick (S80) X-Axis Bucket Sensor Voltage Low Diagnostic Procedure................286
      002662.13 — Secondary Loader Joystick (S80) X-Axis Bucket Sensor Out of Neutral at Start Up................287
        002662.13—Secondary Loader Joystick (S80) X-Axis Bucket Sensor out of Neutral at Start Up Diagnostic Procedure................287
      002662.14 — Secondary Loader Joystick (S80) X-Axis Bucket Sensor Redundancy Error................287
        002662.14—Secondary Loader Joystick (S80) X-Axis Bucket Sensor Redundancy Error Diagnostic Procedure................287
      002663.03 — Secondary Loader Joystick (S80) Y-Axis Boom Sensor Voltage High................288
        002663.03—Secondary Loader Joystick (S80) Y-Axis Boom Sensor Voltage High Diagnostic Procedure................288
      002663.04 — Secondary Loader Joystick (S80) Y-Axis Boom Sensor Voltage Low................288
        002663.04—Secondary Loader Joystick (S80) Y-Axis Boom Sensor Voltage Low Diagnostic Procedure................288
      002663.13 — Secondary Loader Joystick (S80) Y-Axis Boom Sensor Out of Neutral at Start Up................289
        002663.13—Secondary Loader Joystick (S80) Y-Axis Boom Sensor out of Neutral at Start Up Diagnostic Procedure................289
      002663.14 — Secondary Loader Joystick (S80) Y-Axis Boom Sensor Redundancy Error................289
        002663.14—Secondary Loader Joystick (S80) Y-Axis Boom Sensor Redundancy Error Diagnostic Procedure................289
      002664.03 — Right Joystick Auxiliary Control Switch (S82) Voltage High................290
        002664.03—Right Joystick Auxiliary Control Switch (S82) Voltage High Diagnostic Procedure................290
      002664.04 — Right Joystick Auxiliary Control Switch (S82) Voltage Low................290
        002664.04—Right Joystick Auxiliary Control Switch (S82) Voltage Low Diagnostic Procedure................290
      002664.13 — Right Joystick Auxiliary Control Switch (S82) Out of Neutral at Start Up................291
        002664.13—Right Joystick Auxiliary Control Switch (S82) Out of Neutral at Start Up Diagnostic Procedure................291
      002664.14 — Right Joystick Auxiliary Control Switch (S82) Redundancy Error................291
        002664.14—Right Joystick Auxiliary Control Switch (S82) Redundancy Error Diagnostic Procedure................291
      003509.02 — Supply Voltage Out of Tolerance................292
        003509.02—Supply Voltage Out of Tolerance................292
      003510.02 — Reference Voltage Out of Tolerance................292
        003510.02—Reference Voltage Out of Tolerance Diagnostic Procedure................292
      522431.12 — RAM Memory Check Failed................293
        522431.12—RAM Memory Check Failed................293
      523438.12 — Calibration Verification Failed................293
        523438.12—Calibration Verification Failed Diagnostic Procedure................293
      523455.12 — Temperature Sensor 2 Communication Failure................294
        523455.12—Temperature Sensor 2 Communication Failure Diagnostic Procedure................294
      524152.12 — Flash Image Error................294
        524152.12—Flash Image Error Diagnostic Procedure................294
      524259.00 — Temperature Sensor Out of Range High................295
        524259.00—Temperature Sensor Out of Range High Diagnostic Procedure................295
      524259.01 — Temperature Sensor Out of Range Low................295
        524259.01—Temperature Sensor Out of Range Low Diagnostic Procedure................295
      524259.09 — Temperature Sensor Communication Error................295
        524259.09—Temperature Sensor Communication Error Diagnostic Procedure................295
      524259.12 — Temperature Sensor 1 Communication Failure................296
        524259.12—Temperature Sensor 1 Communication Failure Diagnostic Procedure................296
      524259.14 — Temperature Sensor Data Mismatch................296
        524259.14—Temperature Sensor Data Mismatch Diagnostic Procedure................296
    Sealed Switch Module (SSM)................297
      Sealed Switch Module (SSM) Diagnostic Trouble Codes................297
      000629.12 — SSM Watchdog Timeout................297
      000639.09 — No CAN Message................297
      000639.12 — CAN Message Lost................297
      000639.13 — CAN Warning Limit Exceeded................297
      000639.19 — CAN Bus Off................297
      002033.09 — CAN Communications Lost between the SSM and FHC................297
        002033.09—CAN Communications Lost between the SSM and FHC Diagnostic Procedure................297
      523523.10 — Pattern Select Keypad Stuck................298
        523523.10—Pattern Select Keypad Stuck Diagnostic Procedure................298
      523524.10 — Auxiliary Hydraulics Control Keypad Stuck................298
        523524.10—Auxiliary Hydraulics Control Keypad Stuck Diagnostic Procedure................298
      523525.10 — Return-to-Dig Keypad Stuck................298
        523525.10—Return to Dig Keypad Stuck Diagnostic Procedure................298
      523526.10 — Boom Height Kickout Keypad Stuck................299
        523526.10—Boom Height Kickout Keypad Stuck Diagnostic Procedure................299
      523527.10 — Return-to-Carry Keypad Stuck................299
        523527.10—Return-to-Carry Keypad Stuck Diagnostic Procedure................299
      523528.10 — Parallel Lift Keypad Stuck................299
        523528.10—Parallel Lift  Keypad Stuck Diagnostic Procedure................299
      523529.10 — Hydraulic Speed Mode Keypad Stuck................300
        523529.10—Hydraulic Speed Mode Keypad Stuck Diagnostic Procedure................300
      523530.10 — Ride Control Keypad Stuck................300
        523530.10—Ride Control Keypad Stuck Diagnostic Procedure................300
      523531.10 — Beacon Light Keypad Stuck................300
        523531.10—Beacon Light Keypad Stuck Diagnostic Procedure................300
      523532.10 — Keypad 7 Stuck................301
        523532.10—Keypad 7 Stuck Diagnostic Procedure................301
      523533.10 — Auto Idle Keypad Stuck................301
        523533.10—Auto Idle Keypad Stuck Diagnostic Procedure................301
      523534.10 — Keypad 5 Stuck................301
        523534.10— Keypad 5 Stuck Diagnostic Procedure................301
      523535.10 — Keypad 4 Stuck................302
        523535.10—Keypad 4 Stuck Diagnostic Procedure................302
      523536.10 — Keypad 3 Stuck................302
        523536.10—Keypad 3 Stuck Diagnostic Procedure................302
      523537.10 — Keypad 2 Stuck................302
        523537.10—Keypad 2 Stuck Diagnostic Procedure................302
      523538.10 — Keypad 1 Stuck................303
        523538.10—Keypad 1 Stuck Diagnostic Procedure................303
      523607.10 — Override Mode Keypad Stuck................303
        523607.10—Override Mode Keypad Stuck Diagnostic Procedure................303
      523608.10 — Keypad 19 Stuck................303
        523608.10—Keypad 19 Stuck Diagnostic Procedure................303
      523609.10 — Keypad 18 Stuck................304
        523609.10—Keypad 18 Stuck Diagnostic Procedure................304
      523610.10 — Keypad 17 Stuck................304
        523610.10—Keypad 17 Stuck Diagnostic Procedure................304
    Boom Distributed Function Control Unit (BOM)................305
      Boom Distributed Function Control Unit (BOM) Diagnostic Trouble Codes................305
      000158.00 — Battery Voltage High................305
        000158.00—Battery Voltage High Diagnostic Procedure................305
      000158.17 — Battery Voltage Low................306
        000158.17—Battery Voltage Low Diagnostic Procedure................306
      000234.02 — Software Revision Mismatch................307
        Software Revision Mismatch Diagnostic Procedure................307
      000628.2 — Program Failed or Erratic Data................308
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................308
      000628.11 — Program Failed Device Fault................308
        000628.11—Program Failed Device Fault Diagnostic Procedure................308
      000628.12 — Program Failed Device Fault................309
        000628.12—Program Failed Device Fault Diagnostic Procedure................309
      000628.13 — Program Failed Calibration Error................309
        000628.13—Program Failed Calibration Error Diagnostic Procedure................309
      000701.05 — Coil 1 Open Circuit or Short to Ground ................310
        000701.05—Coil 1 Open Circuit or Short to Ground Diagnostic Procedure................310
      000701.06 — Coil 1 Short to Power................310
        000701.06—Coil 1 Short to Power Diagnostic Procedure................310
      000702.05 — Coil 2 Open Circuit or Short to Ground................310
        000702.05—Coil 2 Open Circuit or Short to Ground Diagnostic Procedure................311
      000702.06 — Coil 2 Short to Power................311
        000702.06—Coil 2 Short to Power Diagnostic Procedure................311
      000703.05 — Coil 3 Open Circuit or Short to Ground................311
        000703.05—Coil 3 Open Circuit or Short to Ground Diagnostic Procedure................311
      000703.06 — Coil 3 Short to Power................312
        000703.06—Coil 3 Short to Power Diagnostic Procedure................312
      000704.05 — Coil 4 Open Circuit or Short to Ground................312
        000704.05—Coil 4 Open Circuit or Short to Ground Diagnostic Procedure................312
      000704.06 — Coil 4 Short to Power................313
        000704.06—Coil 4 Short to Power Diagnostic Procedure................313
      000709.03 — Boom Up Work Port Pressure Sensor (B92) Open or Short Circuit................313
        000709.03—Boom Up Work Port Pressure Sensor (B92) Open or Short Circuit Diagnostic Procedure................313
      000709.04 — Boom Up Work Port Pressure Sensor (B92) Short to Ground................314
        000709.04—Boom Up Work Port Pressure Sensor (B92) Short to Ground Diagnostic Procedure................314
      000709.15 — Boom Up Work Port Pressure Out of Range High................314
        000709.15—Boom Up Work Port Pressure Out of Range High Diagnostic Procedure................314
      000710.03 — Boom Down Work Port Pressure Sensor (B93) Open or Short Circuit................315
        000710.03—Boom Down Work Port Pressure Sensor (B93) Open or Short Circuit Diagnostic Procedure................315
      000710.04 — Boom Down Work Port Pressure Sensor (B93) Short to Ground................315
        000710.04—Boom Down Work Port Pressure Sensor (B93) Short to Ground Diagnostic Procedure................315
      000710.15 — Boom Down Work Port Pressure Out of Range High................316
        000710.15—Boom Down Work Port Pressure Out of Range High Diagnostic Procedure................316
      000711.02 — Boom Work Port Temperature Sensors Out of Range................316
        000711.02—Boom Work Port Temperature Sensors Out of Range Diagnostic Procedure................316
      000711.03 — Boom Up Work Port Temperature Sensor Open or Short Circuit................317
        000711.03—Boom Up Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................317
      000711.04 — Boom Up Work Port Temperature Sensor Short to Ground................317
        000711.04—Boom Up Work Port Temperature Sensor Short to Ground Diagnostic Procedure................317
      000711.15 — Boom Up Work Port Temperature High................317
        000711.15—Boom Up Work Port Temperature High Diagnostic Procedure................318
      000711.16 — Boom Up Work Port Temperature Moderately High................318
        000711.16—Boom Up Work Port Temperature Moderately High Diagnostic Procedure................318
      000712.02 — Boom Work Port Temperature Sensors Out of Range................318
        000712.02—Boom Work Port Temperature Sensors Out of Range Diagnostic Procedure................318
      000712.03 — Boom Down Work Port Temperature Sensor Open or Short Circuit................319
        000712.03—Boom Down Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................319
      000712.04 — Boom Down Work Port Temperature Sensor Short to Ground................319
        000712.04—Boom Down Work Port Temperature Sensor Short to Ground Diagnostic Procedure................319
      000712.15 — Boom Down Work Port Temperature High................319
        000712.15—Boom Down Work Port Temperature High Diagnostic Procedure................320
      000712.16 — Boom Down Work Port Temperature Moderately High ................320
        000712.16—Boom Down Work Port Temperature Moderately High Diagnostic Procedure................320
      002839.02 — Function Wiring Identification Invalid................320
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................320
      002839.13 — Backhoe Controller Mismatch................321
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................321
      002839.14 — Coil Short to Ground................321
        Coil Short to Ground Diagnostic Procedure................321
    Bucket Distributed Function Control Unit (BUK)................323
      Bucket Distributed Function Control Unit (BUK) Diagnostic Trouble Codes................323
      000158.00 — Battery Voltage High................323
        000158.00—Battery Voltage High Diagnostic Procedure................323
      000158.17 — Battery Voltage Low................324
        000158.17—Battery Voltage Low Diagnostic Procedure................324
      000234.02 — Software Revision Mismatch................325
        Software Revision Mismatch Diagnostic Procedure................325
      000628.2 — Program Failed or Erratic Data................326
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................326
      000628.11 — Program Failed Device Fault................327
        000628.11—Program Failed Device Fault Diagnostic Procedure................327
      000628.12 — Program Failed Device Fault................327
        000628.12—Program Failed Device Fault Diagnostic Procedure................327
      000628.13 — Program Failed Calibration Error................327
        000628.13—Program Failed Calibration Error Diagnostic Procedure................327
      000701.05 — Coil 1 Open Circuit or Short to Ground ................328
        000701.05—Coil 1 Open Circuit or Short to Ground Diagnostic Procedure................328
      000701.06 — Coil 1 Short to Power................328
        000701.06—Coil 1 Short to Power Diagnostic Procedure................328
      000702.05 — Coil 2 Open Circuit or Short to Ground................329
        000702.05—Coil 2 Open Circuit or Short to Ground Diagnostic Procedure................329
      000702.06 — Coil 2 Short to Power................329
        000702.06—Coil 2 Short to Power Diagnostic Procedure................329
      000703.05 — Coil 3 Open Circuit or Short to Ground................330
        000703.05—Coil 3 Open Circuit or Short to Ground Diagnostic Procedure................330
      000703.06 — Coil 3 Short to Power................330
        000703.06—Coil 3 Short to Power Diagnostic Procedure................330
      000704.05 — Coil 4 Open Circuit or Short to Ground................331
        000704.05—Coil 4 Open Circuit or Short to Ground Diagnostic Procedure................331
      000704.06 — Coil 4 Short to Power................331
        000704.06—Coil 4 Short to Power Diagnostic Procedure................331
      000709.03 — Bucket Curl Work Port Pressure Sensor (B97) Open or Short Circuit................332
        000709.03—Bucket Curl Work Port Pressure Sensor (B97) Open or Short Circuit Diagnostic Procedure................332
      000709.04 — Bucket Curl Work Port Pressure Sensor (B97) Short to Ground................332
        000709.04—Bucket Curl Work Port Pressure Sensor (B97) Short to Ground Diagnostic Procedure................332
      000709.15 — Bucket Curl Work Port Pressure Out of Range High................333
        000709.15—Bucket Curl Work Port Pressure Out of Range High Diagnostic Procedure................333
      000710.03 — Bucket Dump Work Port Pressure Sensor (B96) Open or Short Circuit................333
        000710.03—Bucket Dump Work Port Pressure Sensor (B96) Open or Short Circuit Diagnostic Procedure................333
      000710.04 — Bucket Dump Work Port Pressure Sensor (B96) Short to Ground................334
        000710.04—Bucket Dump Work Port Pressure Sensor (B96) Short to Ground Diagnostic Procedure................334
      000710.15 — Bucket Dump Work Port Pressure Out of Range High................334
        000710.15—Bucket Dump Work Port Pressure Out of Range High Diagnostic Procedure................334
      000711.02 — Bucket Work Port Temperature Sensors Out of Range................335
        000711.02—Bucket Work Port Temperature Sensors Out of Range Diagnostic Procedure................335
      000711.03 — Bucket Curl Work Port Temperature Sensor Open or Short Circuit................335
        000711.03—Bucket Curl Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................335
      000711.04 — Bucket Curl Work Port Temperature Sensor Short to Ground................336
        000711.04—Bucket Curl Work Port Temperature Sensor Short to Ground Diagnostic Procedure................336
      000711.15 — Bucket Curl Work Port Temperature High................336
        000711.15—Bucket Curl Work Port Temperature High Diagnostic Procedure................336
      000711.16 — Bucket Curl Work Port Temperature Moderately High................336
        000711.16—Bucket Curl Work Port Temperature Moderately High Diagnostic Procedure................336
      000712.02 — Bucket Work Port Temperature Sensors Out of Range................337
        000712.02—Bucket Work Port Temperature Sensors Out of Range Diagnostic Procedure................337
      000712.03 — Bucket Dump Work Port Temperature Sensor Open or Short Circuit................337
        000712.03—Bucket Dump Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................337
      000712.04 — Bucket Dump Work Port Temperature Sensor Short to Ground................338
        000712.04—Bucket Dump Work Port Temperature Sensor Short to Ground Diagnostic Procedure................338
      000712.15 — Bucket Dump Work Port Temperature High................338
        000712.15—Bucket Dump Work Port Temperature High Diagnostic Procedure................338
      000712.16 — Bucket Dump Work Port Temperature Moderately High ................338
        000712.16—Bucket Dump Work Port Temperature Moderately High Diagnostic Procedure................338
      002839.02 — Function Wiring Identification Invalid................339
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................339
      002839.13 — Backhoe Controller Mismatch................339
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................339
      002839.14 — Coil Short to Ground................340
        Coil Short to Ground Diagnostic Procedure................340
    Crowd Distributed Function Control Unit (CWD)................341
      Crowd Distributed Function Control Unit (CWD) Diagnostic Trouble Codes................341
      000158.00 — Battery Voltage High................341
        000158.00—Battery Voltage High Diagnostic Procedure................341
      000158.17 — Battery Voltage Low................342
        000158.17—Battery Voltage Low Diagnostic Procedure................342
      000234.02 — Software Revision Mismatch................343
        Software Revision Mismatch Diagnostic Procedure................343
      000628.2 — Program Failed or Erratic Data................344
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................344
      000628.11 — Program Failed Device Fault................345
        000628.11—Program Failed Device Fault Diagnostic Procedure................345
      000628.12 — Program Failed Device Fault................345
        000628.12—Program Failed Device Fault Diagnostic Procedure................345
      000628.13 — Program Failed Calibration Error................345
        000628.13—Program Failed Calibration Error Diagnostic Procedure................345
      000701.05 — Coil 1 Open Circuit or Short to Ground ................346
        000701.05—Coil 1 Open Circuit or Short to Ground Diagnostic Procedure................346
      000701.06 — Coil 1 Short to Power................346
        000701.06—Coil 1 Short to Power Diagnostic Procedure................346
      000702.05 — Coil 2 Open Circuit or Short to Ground................347
        000702.05—Coil 2 Open Circuit or Short to Ground Diagnostic Procedure................347
      000702.06 — Coil 2 Short to Power................347
        000702.06—Coil 2 Short to Power Diagnostic Procedure................347
      000703.05 — Coil 3 Open Circuit or Short to Ground................348
        000703.05—Coil 3 Open Circuit or Short to Ground Diagnostic Procedure................348
      000703.06 — Coil 3 Short to Power................348
        000703.06—Coil 3 Short to Power Diagnostic Procedure................348
      000704.05 — Coil 4 Open Circuit or Short to Ground................349
        000704.05—Coil 4 Open Circuit or Short to Ground Diagnostic Procedure................349
      000704.06 — Coil 4 Short to Power................349
        000704.06—Coil 4 Short to Power Diagnostic Procedure................349
      000709.03 — Crowd Out Work Port Pressure Sensor (B93) Open or Short Circuit................350
        000709.03—Crowd Out Work Port Pressure Sensor (B93) Open or Short Circuit Diagnostic Procedure................350
      000709.04 — Crowd Out Work Port Pressure Sensor (B93) Short to Ground................350
        000709.04—Crowd Out Work Port Pressure Sensor (B93) Short to Ground Diagnostic Procedure................350
      000709.15 — Crowd Out Work Port Pressure Out of Range High................351
        000709.15—Crowd Out Work Port Pressure Out of Range High Diagnostic Procedure................351
      000710.03 — Crowd In Work Port Pressure Sensor (B94) Open or Short Circuit................351
        000710.03—Crowd In Work Port Pressure Sensor (B94) Open or Short Circuit Diagnostic Procedure................351
      000710.04 — Crowd In Work Port Pressure Sensor (B94) Short to Ground................352
        000710.04—Crowd In Work Port Pressure Sensor (B94) Short to Ground Diagnostic Procedure................352
      000710.15 — Crowd In Work Port Pressure Out of Range High................352
        000710.15—Crowd In Work Port Pressure Out of Range High Diagnostic Procedure................352
      000711.02 — Crowd Work Port Temperature Sensors Out of Range................353
        000711.02—Crowd Work Port Temperature Sensors Out of Range Diagnostic Procedure................353
      000711.03 — Crowd Out Work Port Temperature Sensor Open or Short Circuit................353
        000711.03—Crowd Out Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................353
      000711.04 — Crowd Out Work Port Temperature Sensor Short to Ground................354
        000711.04—Crowd Out Work Port Temperature Sensor Short to Ground Diagnostic Procedure................354
      000711.15 — Crowd Out Work Port Temperature High................354
        000711.15—Crowd Out Work Port Temperature High Diagnostic Procedure................354
      000711.16 — Crowd Out Work Port Temperature Moderately High................354
        000711.16—Crowd Out Work Port Temperature Moderately High Diagnostic Procedure................354
      000712.02 — Crowd In Work Port Temperature Sensors Out of Range................355
        000712.02—Crowd In Work Port Temperature Sensors Out of Range Diagnostic Procedure................355
      000712.03 — Crowd In Work Port Temperature Sensor Open or Short Circuit................355
        000712.03—Crowd In Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................355
      000712.04 — Crowd In Work Port Temperature Sensor Short to Ground................356
        000712.04—Crowd In Work Port Temperature Sensor Short to Ground Diagnostic Procedure................356
      000712.15 — Crowd In Work Port Temperature High................356
        000712.15—Crowd In Work Port Temperature High Diagnostic Procedure................356
      000712.16 — Crowd In Work Port Temperature Moderately High ................356
        000712.16—Crowd In Work Port Temperature Moderately High Diagnostic Procedure................356
      002839.02 — Function Wiring Identification Invalid................357
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................357
      002839.13 — Backhoe Controller Mismatch................357
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................357
      002839.14 — Coil Short to Ground................358
        Coil Short to Ground Diagnostic Procedure................358
    Flow Control Distributed Function Control Unit (HAM)................359
      Flow Control Distributed Function Control Unit (HAM) Diagnostic Trouble Codes................359
      000158.00 — Battery Voltage High................359
        000158.00—Battery Voltage High Diagnostic Procedure................359
      000158.17 — Battery Voltage Low................360
        000158.17—Battery Voltage Low Diagnostic Procedure................360
      000234.02 — Software Revision Mismatch................361
        Software Revision Mismatch Diagnostic Procedure................361
      000628.2 — Program Failed or Erratic Data................362
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................362
      000628.11 — Program Failed Device Fault................363
        000628.11—Program Failed Device Fault Diagnostic Procedure................363
      000628.12 — Program Failed Device Fault................363
        000628.12—Program Failed Device Fault Diagnostic Procedure................363
      000628.13 — Program Failed Calibration Error................363
        000628.13—Program Failed Calibration Error Diagnostic Procedure................363
      000701.05 — Coil 1 Open Circuit or Short to Ground ................364
        000701.05—Coil 1 Open Circuit or Short to Ground Diagnostic Procedure................364
      000701.06 — Coil 1 Short to Power................364
        000701.06—Coil 1 Short to Power Diagnostic Procedure................364
      000702.05 — Coil 2 Open Circuit or Short to Ground................365
      000702.06 — Coil 2 Short to Power................365
      000703.05 — Coil 3 Open Circuit or Short to Ground................365
      000703.06 — Coil 3 Short to Power................365
      000704.05 — Coil 4 Open Circuit or Short to Ground................365
      000704.06 — Coil 4 Short to Power................365
      000709.03 — Flow Control Work Port Pressure Sensor (B98) Open or Short Circuit................365
        000709.03—Flow Control Work Port Pressure Sensor (B98) Open or Short Circuit Diagnostic Procedure................365
      000709.04 — Flow Control Work Port Pressure Sensor (B98) Short to Ground................366
        000709.04—Flow Control Work Port Pressure Sensor (B98) Short to Ground Diagnostic Procedure................366
      000709.15 — Flow Control Work Port Pressure Out of Range High................366
        000709.15—Flow Control Work Port Pressure Out of Range High Diagnostic Procedure................366
      000710.03 — Flow Control System Pressure Sensor (B99) Open or Short Circuit................367
        000710.03—Flow Control System Pressure Sensor (B99) Open or Short Circuit Diagnostic Procedure................367
      000710.04 — Flow Control System Pressure Sensor (B99) Short to Ground................367
        000710.04—Flow Control System Pressure Sensor (B99) Short to Ground Diagnostic Procedure................367
      000710.15 — Flow Control System Pressure Out of Range High................368
        000710.15—Flow Control System Pressure Out of Range High Diagnostic Procedure................368
      000711.02 — Flow Control Work Port Temperature Sensors Out of Range................368
        000711.02—Flow Control Work Port Temperature Sensors Out of Range Diagnostic Procedure................368
      000711.03 — Flow Control Work Port Temperature Sensor Open or Short Circuit................369
        000711.03—Flow Control Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................369
      000711.04 — Flow Control Work Port Temperature Sensor Short to Ground................369
        000711.04—Flow Control Work Port Temperature Sensor Short to Ground Diagnostic Procedure................369
      000711.15 — Flow Control Work Port Temperature High................369
        000711.15—Flow Control Work Port Temperature High Diagnostic Procedure................369
      000711.16 — Flow Control Work Port Temperature Moderately High................370
        000711.16—Flow Control Work Port Temperature Moderately High Diagnostic Procedure................370
      000712.02 — Flow Control Work Port Temperature Sensors Out of Range................370
        000712.02—Flow Control Work Port Temperature Sensors Out of Range Diagnostic Procedure................370
      000712.03 — Flow Control System Temperature Sensor Open or Short Circuit................371
        000712.03—Flow Control System Temperature Sensor Open or Short Circuit Diagnostic Procedure................371
      000712.04 — Flow Control System Temperature Sensor Short to Ground................371
        000712.04—Flow Control System Temperature Sensor Short to Ground Diagnostic Procedure................371
      000712.15 — Flow Control System Temperature High................371
        000712.15—Flow Control System Temperature High Diagnostic Procedure................371
      000712.16 — Flow Control System Temperature Moderately High ................372
        000712.16—Flow Control System Temperature Moderately High Diagnostic Procedure................372
      002839.02 — Function Wiring Identification Invalid................372
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................372
      002839.13 — Backhoe Controller Mismatch................373
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................373
      002839.14 — Coil Short to Ground................373
        Coil Short to Ground Diagnostic Procedure................373
    Swing/Extend Distributed Function Control Unit (SWX)................375
      Swing/Extend Distributed Function Control Unit (SWX) Diagnostic Trouble Codes................375
      000158.00 — Battery Voltage High................375
        000158.00—Battery Voltage High Diagnostic Procedure................375
      000158.17 — Battery Voltage Low................376
        000158.17—Battery Voltage Low Diagnostic Procedure................376
      000234.02 — Software Revision Mismatch................377
        Software Revision Mismatch Diagnostic Procedure................377
      000628.2 — Program Failed or Erratic Data................378
        000628.2—Program Failed or Erratic Data Diagnostic Procedure................378
      000628.11 — Program Failed Device Fault................379
        000628.11—Program Failed Device Fault Diagnostic Procedure................379
      000628.12 — Program Failed Device Fault................379
        000628.12—Program Failed Device Fault Diagnostic Procedure................379
      000628.13 — Program Failed Calibration Error................379
        000628.13—Program Failed Calibration Error Diagnostic Procedure................379
      000701.05 — Backhoe Swing Magnitude Solenoid (Y83) Open Circuit or Short to Ground ................380
        000701.05—Backhoe Swing Magnitude Solenoid (Y83) Open Circuit or Short to Ground Diagnostic Procedure................380
      000701.06 — Backhoe Swing Magnitude Solenoid (Y83) Short to Power................380
        000701.06—Backhoe Swing Magnitude Solenoid (Y83) Short to Power Diagnostic Procedure................380
      000702.05 — Backhoe Swing Direction Solenoid (Y84) Open Circuit or Short to Ground................381
        000702.05—Backhoe Swing Direction Solenoid (Y84) Open Circuit or Short to Ground Diagnostic Procedure................381
      000702.06 — Backhoe Swing Direction Solenoid (Y84) Short to Power................381
        000702.06—Backhoe Swing Direction Solenoid (Y84) Short to Power Diagnostic Procedure................381
      000703.05 — Backhoe Extend Magnitude Solenoid (Y85) Open Circuit or Short to Ground................382
        000703.05—Backhoe Extend Magnitude Solenoid (Y85) Open Circuit or Short to Ground Diagnostic Procedure................382
      000703.06 — Backhoe Extend Magnitude Solenoid (Y85) Short to Power................382
        000703.06—Backhoe Extend Magnitude Solenoid (Y85) Short to Power Diagnostic Procedure................382
      000704.05 — Backhoe Extend Direction Solenoid (Y86) Open Circuit or Short to Ground................383
        000704.05—Backhoe Extend Direction Solenoid (Y86) Open Circuit or Short to Ground Diagnostic Procedure................383
      000704.06 — Backhoe Extend Direction Solenoid (Y86) Short to Power................383
        000704.06—Backhoe Extend Direction Solenoid (Y86) Short to Power Diagnostic Procedure................383
      000709.03 — Swing Right Work Port Pressure Sensor (B88) Open or Short Circuit................384
        000709.03—Swing Right Work Port Pressure Sensor (B88) Open or Short Circuit Diagnostic Procedure................384
      000709.04 — Swing Right Work Port Pressure Sensor (B88) Short to Ground................384
        000709.04—Swing Right Work Port Pressure Sensor (B88) Short to Ground Diagnostic Procedure................384
      000709.15 — Swing Right Work Port Pressure Out of Range High................385
        000709.15—Swing Right Work Port Pressure Out of Range High Diagnostic Procedure................385
      000710.03 — Swing Left Work Port Pressure Sensor (B89) Open or Short Circuit................385
        000710.03—Swing Left Work Port Pressure Sensor (B89) Open or Short Circuit Diagnostic Procedure................385
      000710.04 — Swing Left Work Port Pressure Sensor (B89) Short to Ground................386
        000710.04—Swing Left Work Port Pressure Sensor (B89) Short to Ground Diagnostic Procedure................386
      000710.15 — Swing Left Work Port Pressure Out of Range High................386
        000710.15—Swing Left Work Port Pressure Out of Range High Diagnostic Procedure................386
      000711.02 — Swing Work Port Temperature Sensors Out of Range................387
        000711.02—Swing Work Port Temperature Sensors Out of Range Diagnostic Procedure................387
      000711.03 — Swing Right Work Port Temperature Sensor Open or Short Circuit................387
        000711.03—Swing Right Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................387
      000711.04 — Swing Right Work Port Temperature Sensor Short to Ground................388
        000711.04—Swing Right Work Port Temperature Sensor Short to Ground Diagnostic Procedure................388
      000711.15 — Swing Right Work Port Temperature High................388
        000711.15—Swing Right Work Port Temperature High Diagnostic Procedure................388
      000711.16 — Swing Right Work Port Temperature Moderately High................388
        000711.16—Swing Right Work Port Temperature Moderately High Diagnostic Procedure................388
      000712.02 — Swing Work Port Temperature Sensors Out of Range................389
        000712.02—Swing Work Port Temperature Sensors Out of Range Diagnostic Procedure................389
      000712.03 — Swing Left Work Port Temperature Sensor Open or Short Circuit................389
        000712.03—Swing Left Work Port Temperature Sensor Open or Short Circuit Diagnostic Procedure................389
      000712.04 — Swing Left Work Port Temperature Sensor Short to Ground................389
        000712.04—Swing Left Work Port Temperature Sensor Short to Ground Diagnostic Procedure................390
      000712.15 — Swing Left Work Port Temperature High................390
        000712.15—Swing Left Work Port Temperature High Diagnostic Procedure................390
      000712.16 — Swing Left Work Port Temperature Moderately High ................390
        000712.16—Swing Left Work Port Temperature Moderately High Diagnostic Procedure................390
      002839.02 — Function Wiring Identification Invalid................391
        002839.02—Function Wiring Identification Invalid Diagnostic Procedure................391
      002839.13 — Backhoe Controller Mismatch................391
        002839.13—Backhoe Controller Mismatch Diagnostic Procedure................391
      002839.14 — Coil Short to Ground................392
        Coil Short to Ground Diagnostic Procedure................392
  Operational Checkout Procedure................393
    Operational Checkout Procedure................395
      Operational Checkout Procedure................395
        Diagnostic Trouble Code Check................395
        Key Switch Off, Engine Off Checks................395
        Key Switch On, Engine Off Checks................395
        Key Switch On, Engine On Checks................400
        Cab System Checks................431
  Engine................433
    Theory of Operation................435
      PowerTech E™ 4.5L (4045) John Deere Engine................435
      Engine Cooling System................435
    Diagnostic Information................437
      PowerTech E™ 4.5L (4045) John Deere Engine................437
      Engine Cooling System Component Location................438
      Engine Fuel System Component Location................439
      Engine Intake and Exhaust Component Location................441
    Adjustments................443
      PowerTech E™ 4.5L (4045) John Deere Engine................443
    Tests................445
      PowerTech E™ 4.5L (4045) John Deere Engine................445
      Fluid Sampling Procedure—If Equipped................446
      Engine Speed Check................450
      Intake Manifold Pressure—Turbocharger Boost................451
      Air Intake System Leakage Test................452
      Air in Fuel Test................452
      Engine Thermostat Test................453
      Thermal Bypass Valve Test................453
  Electrical System................456
    System Information................457
      Electrical Diagram Information................457
      Electrical Schematic Symbols................461
    System Diagrams................465
      Fuse and Relay Location and Specifications................465
      System Functional Schematic, Wiring Diagram, and Component Location Legend................467
      System Functional Schematic and Section Legend................472
      JDLink™ System Functional Schematic—MIG/GTT................519
      JDLink™ System Functional Schematic—MTG/SAT................527
      Canopy (ROPS) Harness (W5) Component Location................533
      Canopy (ROPS) Harness (W5) Wiring Diagram................537
      Loader Boom Harness (W6) Component Location................546
      Loader Boom Harness (W6) Wiring Diagram................547
      Engine Harness (W7) Component Location................549
      Engine Harness (W7) Wiring Diagram................553
      Chassis Harness (W8) Component Location................561
      Chassis Harness (W8) Wiring Diagram................565
      Transmission Harness (W9) Component Location................569
      Transmission Harness (W9) Wiring Diagram................573
      Cab Harness (W10) Component Location................577
      Cab Harness (W10) Wiring Diagram................581
      Backhoe Boom Harness (W11) Component Location................590
      Backhoe Boom Harness (W11) Wiring Diagram................592
      Backhoe Crowd Harness (W12) Component Location................594
      Backhoe Crowd Harness (W12) Wiring Diagram................596
      Backhoe Flow Control Harness (W13) Component Location................598
      Backhoe Flow Control Harness (W13) Wiring Diagram................600
      Seat Harness (W14) Component Location................603
      Seat Harness (W14) Wiring Diagram................607
      Roof Harness (W15) Component Location................609
      Roof Harness (W15) Wiring Diagram................611
      Air Conditioning Harness (W16) Component Location................614
      Air Conditioning Harness (W16) Wiring Diagram................616
      Ride Control Harness (W18) Component Location................618
      Ride Control Harness (W18) Wiring Diagram................619
      Radio Harness (W20) Component Location................620
      Radio Harness (W20) Wiring Diagram................622
      Loader Coupler Harness (W21, W22) Component Location................624
      Loader Coupler Harness (W21, W22) Wiring Diagram................625
      JDLink™ System Harnesses Component Location—MIG/GTT................626
      JDLink™ System Harnesses Component Location—MTG/SAT................630
      JDLink™ System Wiring Diagrams—MIG/GTT................632
      JDLink™ System Wiring Diagrams—MTG/SAT................647
    Sub-System Diagnostics................655
      Start and Charge Circuit Theory of Operation................655
      Controller Area Network (CAN) Circuit Theory of Operation................659
      Engine Control Unit (ECU) Circuit Theory of Operation................667
      Flex Load Controller (FLC) Circuit Theory of Operation................673
      Flex Hydraulic Controller (FHC) Circuit Theory of Operation................683
      Joystick Controllers Circuit Theory of Operation................691
      Intelligent System Planner (ISP) and Distributed Functions Circuit Theory of Operation................695
      Standard Display Monitor (SDM) Circuit Theory of Operation................704
      JDLink™ Circuit Theory of Operation—If Equipped................707
    Monitor Operation................711
      Standard Display Monitor (SDM)—Service Menu................711
      Standard Display Monitor (SDM)—Clear Codes................711
      Standard Display Monitor (SDM)—Diagnostics................712
      Standard Display Monitor (SDM)—Machine Calibration................716
      Standard Display Monitor (SDM)—Hide/Unhide Main Menu................716
      Standard Display Monitor (SDM)—Restore Monitor Defaults................717
      Standard Display Monitor (SDM)—Machine Options................717
      Standard Display Monitor (SDM)—Setting Hour Meter................718
      Anti-Theft Security System Enable/Disable................719
      Anti-Theft Security System Configuration................720
      Anti-Theft Security System Operation................722
    References................723
      Service ADVISOR™ Connection Procedure................723
      JDLink™ System Identification................724
      JDLink™ Connection Procedure—If Equipped................726
      Reading Diagnostic Trouble Codes (DTCs)................727
      Diagnostic Trouble Code (DTC) Monitor Messages................730
      Intermittent Diagnostic Trouble Code (DTC) Diagnostics................731
      Controller Area Network (CAN) Circuit Test................733
        Controller Area Network (CAN) Diagnostics ................736
      Controller Area Network (CAN) Resistor Test................741
      Alternator Test Procedure................742
      Electrical Component Specifications................743
      Wire Harness Test................747
      Sensor Circuit Check................748
      Crank Position Sensor Test................748
      Flex Hydraulic Controller (FHC) Output Test................749
      Flex Load Controller (FLC) Output Test................749
      Transmission Control Circuit Test................750
      Transmission Solenoid Circuit Test................751
      Transmission Control Lever (TCL) Test................751
      Throttle Position Sensor Test................752
      Solenoid Coil Test................753
      Loader Boom and Bucket Sensor Calibration Procedure................754
      Electro-Hydraulic Spool Valve Calibration................755
      Register Section Control Number................756
      Backhoe Swing Calibration................757
      Joystick Controller Remove and Install................758
      Joystick Controller Disassemble and Assemble................761
      Seat Position Switches Remove and Install................787
      WEATHER PACK® Connector Remove and Install................787
      WEATHER PACK® Contact Installation................788
      DEUTSCH® Connector Remove and Install................789
      DEUTSCH® Contact Installation................791
      CINCH™ Connector Remove and Install................792
      CINCH™ Contact Installation................794
      CINCH™ CP Connector Remove and Install................795
      CINCH™ CP Contact Installation................801
      Metri-Pack® Connector Remove and Install................803
  Power Train................806
    Theory of Operation................808
      Power Shift Power Train Overview................808
      Clutch Modulation Operation................810
      Torque Converter Operation................812
      Transmission Pump Operation................814
      Transmission Filter Operation................815
      Clutch and Mechanical Front Wheel Drive (MFWD) Operation................816
      Power Shift Transmission Gear Flow................818
      Power Shift Transmission Clutch Engagement and Solenoids Activated................820
      Differential Operation................822
      Differential Lock Operation................824
      MICO Power Boost Brake Valve—Neutral Position................826
      MICO Power Boost Brake Valve—Both Pedals Applied Position................828
      MICO Power Boost Brake Valve—One Pedal Applied Position................830
      MICO Power Boost Brake Valve—Both Pedals Applied, Engine Off Position................832
      Service Brake Operation................833
      Park Brake Operation................834
      MFWD Differential Operation—Unequal Traction................836
      MFWD Differential Operation—Equal Traction—If Equipped................837
    Diagnostic Information................839
      Power Train Component Location................839
      Hydraulic Circuit—Symbols................842
      Power Train Schematic—Neutral................843
      Power Train Schematic—First Forward Mechanical Front Wheel Drive (MFWD) Engaged................847
      Power Train Schematic—First Reverse................851
      Power Train Schematic—Fourth Forward................855
      Diagnose Transmission Malfunctions................858
      Transmission Slippage................858
        Transmission Slippage Diagnostic Procedure................858
      Machine Lacks Power or Moves Slow................859
        Machine Lacks Power or Moves Slow Diagnostic Procedure................859
      Transmission Overheats................863
        Transmission Overheats Diagnostic Procedure................863
      Excessive Power Train Noise................865
        Excessive Power Train Noise Diagnostic Procedure................865
      Park Brake Piston Leak................867
        Excessive Power Train Noise Diagnostic Procedure................867
      No Power to Mechanical Front Wheel Drive (MFWD)................867
        No Power to Mechanical Front Wheel Drive (MFWD) Diagnostic Procedure................867
      No Power to One Wheel of Mechanical Front Wheel Drive (MFWD)................868
        No Power to One Wheel of Mechanical Front Wheel Drive (MFWD) Diagnostic Procedure................868
      No Differential Lock Operation................869
        No Differential Lock Operation Diagnostic Procedure................869
      Differential Lock Slips or Chatters When Engaged................870
        Differential Lock Slips or Chatters When Engaged Diagnostic Procedure................870
      Differential Lock Will Not Release................871
        Differential Lock Will Not Release Diagnostic Procedure................871
      Rear Axle Overfilled With Oil................872
        Rear Axle Overfilled With Oil Diagnostic Procedure................872
      Poor Service Brakes................873
        Poor Service Brakes Diagnostic Procedure................873
      Brake Pedal Hard to Push................874
        Brake Pedal Hard to Push Diagnostic Procedure................874
      Service Brakes Dragging or Will Not Release................874
        Service Brakes Dragging or Will Not Release Diagnostic Procedure................875
      Service Brakes Chatter or Noisy................876
        Service Brakes Chatter or Noisy Diagnostic Procedure................876
      Park Brake Will Not Hold................877
        Park Brake Will Not Hold Diagnostic Procedure................877
      Park Brake Will Not Release................877
        Park Brake Will Not Release Diagnostic Procedure................878
    Adjustments................881
      Park Brake Release for Towing................881
      Brake Pedal Adjustment................882
      Brake Bleeding Procedure................883
      Tracking Angle Check and Adjust................885
      Toe-In Check and Adjust................885
      Steering Angle Check and Adjust................886
    Tests................887
      Transmission Oil Warm-Up Procedure................887
      Transmission Oil Sampling Procedure—If Equipped................887
      Power Shift Transmission Overall Test Connections, Ports, and Locations................888
      Torque Converter Stall Speed Test................890
      Torque Converter Inlet Pressure Test................891
      Brake Valve Leakage Test................893
      Park Brake Release Pressure Test................894
      Transmission System Pressure Test................895
      Service Brake Boost Pressure Test................896
      Clutch Pressure Test................897
      Differential Lock Pressure Test................898
      Mechanical Front Wheel Drive (MFWD) Pressure Test................899
      Cooler In and Cooler Out Pressure Test................900
      Solenoid Circuit Leakage Test................902
      Transmission Pump Flow Test................903
  Hydraulic System................908
    Theory of Operation................909
      Hydraulic Pump Operation................909
      Power Limiting Valve Operation................910
      Hydraulic Filter Operation................911
      Steering Valve Operation................914
      Ride Control Hydraulic Circuit Component Location and Valve Operation................918
      Attachment Coupler Hydraulic Operation................920
      Electro-Hydraulic System Theory of Operation................921
      Electro-Hydraulic Solenoid Logic................926
      Electro-Hydraulic Spool Valve Loader Boom, Bucket, Loader Auxiliary and Backhoe Auxiliary Valves Theory of Operation................928
      Electro-Hydraulic Spool Valve Backhoe Swing Valve Theory of Operation................932
      Electro-Hydraulic Spool Valve Backhoe Extend Theory of Operation................936
      Electro-Hydraulic Spool Valve Mid-Inlet Theory of Operation................942
      Electro-Hydraulic Spool Valve Direction and Magnitude Solenoids Theory of Operation................947
      Electro-Hydraulic Spool Valve Backhoe Stabilizer Valve Theory of Operation................952
      Electro-Hydraulic Spool Valve Assembly Load Sense Isolator and Pressure Compensator Theory of Operation................958
      Electro-Hydraulic Spool Valve Relief Valve Theory of Operation................960
      Electro-Hydraulic Spool Valve Anticavitation Valve and Plug Assembly Theory of Operation................961
      Distributed Function Control Valve Assembly Operation................962
      Backhoe Distributed Function Valve Assembly Theory of Operation—Boom Raise/Lower Operation................966
      Backhoe Distributed Function Valve Assembly Theory of Operation—Crowd In/Out Operation................970
      Backhoe Distributed Function Valve Assembly Theory of Operation—Bucket Curl/Dump Operation................974
      Distributed Function Control Valve Operation—Flow Control Distributed Function Control Unit (HAM)................978
      Distributed Function Valve Assembly Circuit Relief Valve Theory of Operation................982
      Hydraulic Thumb Operation—If Equipped................985
    Diagnostic Information................989
      Hydraulic Schematic................989
      Hydraulic System Component Location................1001
      Load Sense Regulation Valve................1019
      All Backhoe Functions (Boom, Crowd, Bucket, Hammer) Slow................1019
        All Backhoe Functions (Boom, Crowd, Bucket, Hammer) Slow Diagnostic Procedure................1019
      All Spool Valve Functions (Loader, Swing, Stabilizer, Auxiliary) Slow................1021
        All Spool Valve Functions (Loader, Swing, Stabilizer, Auxiliary) Slow Diagnostic Procedure................1021
      Single Spool Valve Function (Loader, Swing, Stabilizer, Auxiliary) Slow................1022
        Single Spool Valve Function (Loader, Swing, Stabilizer, Auxiliary) Slow Diagnostic Procedure................1022
      Single Backhoe Function (Boom, Crowd, Bucket, Hammer) Slow................1023
        Single Backhoe Function (Boom, Crowd, Bucket, Hammer) Slow Diagnostic Procedure................1023
      All Functions Chatter................1024
        All Functions Chatter Diagnostic Procedure................1024
      Single Spool Valve Function (Loader, Auxiliary) Chatter................1025
        Single Spool Valve Function (Loader, Auxiliary) Chatter Diagnostic Procedure................1026
      Spool Valve Function (Swing, Extend) Chatter................1026
        Spool Valve Function (Swing, Extend) Chatter Diagnostic Procedure................1026
      Single Backhoe Function Chatter................1027
        Single Backhoe Function Chatter Diagnostic Procedure................1027
      All Spool Valve Functions (Loader, Swing, Extend, Stabilizer) Too Fast................1028
        All Spool Valve Functions (Loader, Swing, Extend, Stabilizer) Too Fast Diagnostic Procedure................1028
      Single Spool Valve Functions (Swing, Extend) Too Fast................1028
        Single Spool Valve Functions (Swing, Extend) Too Fast Diagnostic Procedure................1028
      All Backhoe Functions (Boom, Crowd, Bucket, Hammer) Fast................1029
        All Backhoe Functions (Boom, Crowd, Bucket, Hammer) Fast Diagnostic Procedure................1029
      Single Backhoe Function (Boom, Crowd, Bucket, Hammer) Fast................1030
        Single Backhoe Function (Boom, Crowd, Bucket, Hammer) Fast Diagnostic Procedure................1030
      No Hydraulics................1031
        No Hydraulics Diagnostic Procedure................1031
      No Spool Valve (Loader, Swing, Extend, Stabilizer, Auxiliary) Hydraulics................1032
        No Spool Valve (Loader, Swing, Extend, Stabilizer, Auxiliary) Hydraulics Diagnostic Procedure................1032
      No Backhoe Functions................1033
        No Backhoe Hydraulics Diagnostic Procedure................1033
      Spool Valve Functions Do Not Stop................1034
        Spool Valve Functions Do Not Stop Diagnostic Procedure................1034
      Backhoe Functions Do Not Stop................1034
        Backhoe Functions Do Not Stop Diagnostic Procedure................1034
      Low Hydraulic Power................1036
        Low Hydraulic Power Diagnostic Procedure................1036
      Excessive Engine Pulldown (All Functions)................1037
        Excessive Engine Pulldown (All Functions) Diagnostic Procedure................1037
      Excessive Engine Pulldown (Single Backhoe Function)................1037
        Excessive Engine Pulldown (Single Backhoe Function) Diagnostic Procedure................1037
      One Function Slow in Combined Operation (Spool Valve Functions)................1038
        One Function Slow in Combined Operation (Spool Valve Functions) Diagnostic Procedure................1038
      One Function Slow in Combined Operation (Backhoe Functions)................1038
        One Function Slow in Combined Operation (Backhoe Functions) Diagnostic Procedure................1038
      No Swing Function................1039
        No Swing Function Diagnostic Procedure................1039
      Swing Wag................1039
        Swing Wag Diagnostic Procedure................1039
      Hydraulic Oil Overheats................1040
        Hydraulic Oil Overheats Diagnostic Procedure................1040
      Spool Valve Function Only Moves in One Direction................1041
        Spool Valve Function Only Moves in One Direction Diagnostic Procedure................1041
      Backhoe Function Drift................1042
        Backhoe Function Drift Diagnostic Procedure................1042
      No Stabilizer Function................1043
        No Stabilizer Function Diagnostic Procedure................1043
      Foaming Oil................1043
        Foaming Oil Diagnostic Procedure................1044
      Hydraulic Pump Leaking................1044
        Hydraulic Pump Leaking Diagnostic Procedure................1044
      Backhoe Boom Valve Noise—In Neutral................1045
        Excessive Backhoe Boom Valve Noise Diagnostic Procedure................1045
      Excessive Pump Noise................1045
        Excessive Pump Noise Diagnostic Procedure................1045
      Slow Steering Hydraulics................1046
        Slow Steering Hydraulics Diagnostic Procedure................1046
      No Steering Hydraulics................1046
        No Steering Hydraulics Diagnostic Procedure................1046
      Hard Steering................1047
        Hard Steering Diagnostic Procedure................1047
      Steering Valve Does Not Return to Neutral................1047
        Steering Valve Does Not Return to Neutral Diagnostic Procedure................1047
      No Response when Steering Wheel is Turned................1048
        No Response when Steering Wheel is Turned Diagnostic Procedure................1048
      Machine Turns in Opposite Direction................1049
        Machine Turns in Opposite Direction Diagnostic Procedure................1049
      Excessive Vibration of the Steering Wheel................1049
        Excessive Vibration of the Steering Wheel Diagnostic Procedure................1049
      Machine Turns when Steering Valve is in Neutral................1049
        Machine Turns when Steering Valve is in Neutral Diagnostic Procedure................1050
      Steering Wheel Kickback................1050
        Steering Wheel Kickback Diagnostic Procedure................1050
      Excessive Steering Wheel Turns To Steer Machine................1050
        Excessive Steering Wheel Turns To Steer Machine Diagnostic Procedure................1050
      Erratic (“Spongy”) Steering................1050
        Erratic (“Spongy”) Steering Diagnostic Procedure................1051
      Steering Wheel "Locks" Up................1051
        Steering Wheel "Locks" Up Diagnostic Procedure................1051
      Poor Centering of Steering Wheel (Wheels Continue to Move After Steering Wheel is Stopped) ................1051
        Poor Centering of Steering Wheel (Wheels Continue to Move After Steering Wheel is Stopped) Diagnostic Procedure................1051
      Steering Wheel or Front Wheels Slowly Turn by Themselves When Using Backhoe or Loader................1052
        Steering Wheel or Front Wheels Slowly Turn by Themselves When Using Backhoe or Loader Diagnostic Procedure................1052
      Steering Wheel Turns Apply Rear Axle Service Brakes................1052
        Steering Wheel Turns Apply Rear Axle Service Brakes Diagnostic Procedure................1052
      Steering Wheel Turns Freely With No Resistance or Action On Steered Wheels................1053
        Steering Wheel Turns Freely With No Resistance or Action On Steered Wheels Diagnostic Procedure................1053
      Steering Wheel Turns With Slight Resistance and No Action On Steered Wheels................1053
        Steering Wheel Turns Freely With No Resistance or Action On Steered Wheels Diagnostic Procedure................1053
      Wander—Vehicle Will Not Stay in a Straight Line................1053
        Wander—Vehicle Will Not Stay in a Straight Line Diagnostic Procedure................1054
      No Loader or Steering Hydraulics................1054
        No Loader or Steering Hydraulics Diagnostic Procedure................1054
    Adjustments................1057
      Ride Control Accumulator Charge Procedure................1057
      Ride Control Accumulator Charge Check Procedure................1059
      Ride Control Accumulator Hydraulic Pressure Release Procedure................1060
      Pilot Control Pressure Adjustment................1060
      Pilot Control Manifold Valve Accumulator Discharge Procedure................1061
    Tests................1063
      JT02156A Digital Pressure and Temperature Analyzer Kit Installation................1063
      Hydraulic Oil Warmup Procedure................1063
      Fluid Sampling Procedure—If Equipped................1064
      Hydraulic Circuit Pressure Release................1068
      Load Sense Relief Valve Pressure Test................1069
      Hydraulic Oil Cooler Restriction Test................1071
      Circuit Relief Valve Test With Remote Pump................1073
      Pump Load Sense Differential Pressure Test................1076
      Hydraulic Pump Flow Test................1078
      Hydraulic Return Pressure Test................1080
      Power Limiting Valve Test................1081
      Pilot Control Accumulator Charge Pressure Test................1082
      Steering System Leakage Test................1083
      Steering Cylinder Leakage Test................1084
      Function Drift Test................1086
      Hydraulic Cylinder Leakage Test................1090
  Heating and Air Conditioning................1091
    Theory of Operation................1093
      Air Conditioning System Cycle Of Operation................1093
    Diagnostic Information................1095
      Air Conditioning System Does Not Operate................1095
        Air Conditioning System Does Not Operate Diagnostic Procedure................1095
      Air Conditioner Does Not Cool Interior of Cab................1096
        Air Conditioner Does Not Cool Interior of Cab Diagnostic Procedure................1096
      Air Conditioner Runs Constantly, Too Cold................1097
        Air Conditioner Runs Constantly, Too Cold Diagnostic Procedure................1097
      Interior Windows Continue to Fog................1098
        Interior Windows Continue to Fog Diagnostic Procedure................1098
      Heater System Does Not Operate................1098
        Heater System Does Not Operate Diagnostic Procedure................1098
      Heater Does Not Warm Interior of Cab................1099
        Heater Does Not Warm Interior of Cab Diagnostic Procedure................1099
      Air Conditioning and Heater System Component Location................1101
    Tests................1105
      Proper Refrigerant Handling................1105
      R134a Refrigerant Cautions................1105
      R134a Air Conditioning System Test................1106
      Operating Pressure Diagnostic Chart................1108
      Expansion Valve Operation Test................1110
      Blower Switch Test................1111
      Blower Resistor Test................1111
      Heater Blower Motor Test................1112
      Freeze Control Switch Test................1112
      Air Conditioning Switch Test................1113
      Binary Pressure Switch Test................1114
      Compressor Clutch Coil Test................1115
      Air Conditioning System Leak Test................1115
      Refrigerant Hoses And Tubing Inspection................1116

John Deere 310SJ and 410J Backhoe Loader with Total Machine Control (TMC) (S.N. 161703— ) Workshop Service Repair Manual - TM10852