Complete service repair manual for John Deere Compact Loaders 244J (SN.-23289), 304J (SN.-23371), with all the workshop information to maintain, repair, and service like professional mechanics.

John Deere Compact Loaders 244J, 304J workshop service & repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM2207 - John Deere 244J (SN.-23289) , 304J (SN.-23371) Compact Loaders Technical Manual - Repair.pdf
tm10206 - John Deere 244J ( —23289) et 304J ( —23371)charger à transmission quatre roues motrices.pdf

Category: Repair
Language: English French
Published on 2020/01/25

Total Pages: 454 pages
File Format: PDF (bookmarked, ToC, Searchable, Printable)
Language: English

MAIN SECTIONS
Foreword
   Technical Information Feedback Form
   General Information
      Safety Information
   Wheels
      Wheels and Fasteners
   Axles and Suspension System
      Removal and Installation
      Axle Shafts and U-Joints
      Axle Shaft, Bearings, and Rear Axle Reduction Gears
   Transmission
      Hydrostatic Components Removal and Installation
      Hydrostatic Components Repair
   Engine
      Removal and Installation
   Engine Auxiliary Systems
      Cooling System
      Speed Controls
      External Fuel Supply Systems
   Dampener Drive
      Removal and Installation
   Steering System
      Hydraulic System
   Service Brakes
      Active Elements
      Hydraulic System
   Park Brake
      Hydraulic System
   Frame or Supporting Structure
      Frame Installation
      Chassis Weights
   Operator`s Station
      Removal and Installation
      Operator Enclosure
      Heating and Air Conditioning System
   Sheet Metal and Styling
      Miscellaneous Shields
   Main Hydraulic System
      Hydraulic System
   Loader
      Bucket
      Attachment Coupler
      Frames
      Hydraulic System
   Dealer Fabricated Tools

Table of Contents
Foreword
Technical Information Feedback Form
Section 00: General Information
Group 0001: Safety Information
Recognize Safety Information
Follow Safety Instructions
Operate Only If Qualified
Wear Protective Equipment
Avoid Unauthorized Machine Modifications
Add Cab Guarding For Special Uses
Inspect Machine
Stay Clear of Moving Parts
Avoid High-Pressure Oils
Beware of Exhaust Fumes
Prevent Fires
Prevent Battery Explosions
Handle Chemical Products Safely
Dispose of Waste Properly
Prepare for Emergencies
Use Steps and Handholds Correctly
Start Only From Operator's Seat
Use and Maintain Seat Belt
Prevent Unintended Machine Movement
Avoid Work Site Hazards
Use Special Care When Operating Loader
Keep Riders Off Machine
Avoid Backover Accidents
Avoid Machine Tip Over
Operating on Slopes
Operating or Traveling On Public Roads
Inspect and Maintain ROPS
Add and Operate Attachments Safely
Park and Prepare For Service Safely
Service Cooling System Safely
Remove Paint Before Welding or Heating
Make Welding Repairs Safely
Drive Metal Pins Safely
Group 0003: Torque Values
Metric Bolt and Cap Screw Torque Values
Additional Metric Cap Screw Torque Values
Unified Inch Bolt and Cap Screw Torque Values
Service Recommendations for 37° Flare and 30° Cone Seat Connectors
Service Recommendations for O-Ring Boss Fittings
O-Ring Boss Fittings in Aluminum Housing Service Recommendations—Excavators
Service Recommendations for Flared Connections—Straight or Tapered Threads
Service Recommendations for Flat Face O-Ring Seal Fittings
O-Ring Face Seal Fittings With SAE Inch Hex Nut and Stud End for High-Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for Standard Pressure Service Recommendations
O-Ring Face Seal Fittings With Metric Hex Nut and Stud End for High-Pressure Service Recommendations
Service Recommendations for Metric Series Four Bolt Flange Fitting
Service Recommendations For Inch Series Four Bolt Flange Fittings
Inch Series Four Bolt Flange Fitting for High-Pressure Service Recommendations
Service Recommendations For Non-Restricted Banjo (Adjustable) Fittings
Service Recommendations For O-Ring Boss Fittings With Shoulder
Metric 24° O-Ring Seal DIN 20078 Service Recommendations
Section 01: Wheels
Group 0110: Wheels and Fasteners
Wheel Remove and Install
Tire Remove and Install
Section 02: Axles and Suspension System
Group 0200: Removal and Installation
Front Axle Remove and Install
Rear Axle Remove and Install
Group 0225: Axle Shafts and U-Joints
Drive Shaft Remove and Install
Group 0250: Axle Shaft, Bearings, and Rear Axle Reduction Gears
Axle Shaft, Bearings, and Rear Axle Reduction Gears
Section 03: Transmission
Group 0300: Hydrostatic Components Removal and Installation
Hydrostatic Pump Valves Remove and Install
Directional Control Valve Remove and Install
Charge Pump Remove and Install
Hydrostatic Pump Remove and Install
Hydrostatic Motor Remove and Install
Inching Valve Remove and Install
Hydrostatic Start-Up Procedure
Group 0360: Hydrostatic Components Repair
Directional Control Valve Disassemble and Assemble
Hydrostatic Pump Disassemble
Hydrostatic Pump Assemble
Hydrostatic Motor Control Valve O-Rings and Seals Remove and Install
Hydrostatic Motor Flushing Valve O-Rings and Servo Piston Seals Remove and Install
Hydrostatic Motor Disassemble
Hydrostatic Motor Rotating Group Inspect and Recondition
Hydrostatic Motor Assemble
Section 04: Engine
Group 0400: Removal and Installation
POWERTECH 2.4 L (4024) and 3.0 L (5030) John Deere Engines
Serpentine Belt Remove and Install
Engine Remove and Install
Section 05: Engine Auxiliary Systems
Group 0510: Cooling System
Hydraulic Cooling Fan Pump Remove and Install
Hydraulic Cooling Fan Pump Disassemble and Assemble
Cooling Fan and Cooling Fan Motor Remove and Install
Cooling Fan Motor Disassemble and Assemble
Radiator/Oil Cooler Remove and Install
Group 0515: Speed Controls
POWERTECH 2.4 L (4024) and 3.0 L (5030) John Deere Engines
Speed Control Linkage Remove and Install
Group 0560: External Fuel Supply Systems
Fuel Tank Remove and Install
Section 07: Dampener Drive
Group 0700: Removal and Installation
Dampener Drive Remove and Install
Section 09: Steering System
Group 0960: Hydraulic System
Steering Valve Remove and Install
Steering Valve Disassemble and Inspect
Steering Valve Assemble
Steering Column Remove and Install
Steering Cylinder Remove and Install
Steering Cylinder Disassemble and Assemble
Section 10: Service Brakes
Group 1011: Active Elements
Drum Brake Remove and Install
Service Brakes (Wet Disk) Remove and Install
Group 1060: Hydraulic System
Brake/Inching Valve Assembly Remove and Install
Brake Valve Disassemble and Assemble
Drum Brake Bleed
Section 11: Park Brake
Group 1160: Hydraulic System
Park Brake Disassemble and Assemble
Park Brake/Differential Lock Valve Block Remove and Install
Section 17: Frame or Supporting Structure
Group 1740: Frame Installation
Welding Repair of Major Structures
Loader and Rear Frames Separation
Rotational Torque Spring Remove and Install
Upper Pivot Bushing Assembly Remove and Install
Lower Pivot Bushing Assembly Remove and Install
Group 1749: Chassis Weights
Counterweights Remove and Install
Section 18: Operator's Station
Group 1800: Removal and Installation
Cab Remove and Install
Group 1810: Operator Enclosure
Windowpanes Remove and Install
Group 1830: Heating and Air Conditioning System
Refrigerant Cautions and Proper Handling
Flush and Purge Air Conditioner System
R134a Refrigerant Oil Information
R134a Refrigerant Recovery/Recycling and Charging Station Installation Procedure
Recover R134a Refrigerant
Evacuate R134a System
Charge R134a System
Air Conditioner Compressor Remove and Install
Receiver-Dryer Remove and Install
Condenser Remove and Install
Air Conditioner/Heater Module Remove and Install
Heater Core Remove and Install
Evaporator Coil Remove and Install
Expansion Valve Remove and Install
Heater Control Valve Remove and Install
AC High/Low Pressure Switch Remove and Install
AC Thermostat Switch Remove and Install
Blower Motor Remove and Install
Section 19: Sheet Metal and Styling
Group 1913: Miscellaneous Shields
Rear Fenders Remove and Install
Section 21: Main Hydraulic System
Group 2160: Hydraulic System
Hydraulic Oil Cleanup Procedure Using Portable Filter Caddy
Main Hydraulic Pump/Priority Valve Remove and Install
Main Hydraulic Pump/Priority Valve Disassemble and Assemble
Hydraulic Reservoir Remove and Install
Hydraulic Oil Cooler Remove and Install
Section 31: Loader
Group 3102: Bucket
Bucket Teeth Remove and Install
Welded-On Bucket Cutting Edge Remove and Install
Bolt-On Cutting Edge Remove and Install
Cracked Cutting Edge Repair
Group 3104: Attachment Coupler
Quick Disconnect Hitch Disassemble and Assemble
Group 3140: Frames
Boom and Bucket Linkage Remove and Install
Bucket Linkage Bushings Remove and Install
Loader Boom Bushings Remove and Install
Group 3160: Hydraulic System
Loader Control Valve Remove and Install
Loader Control Valve Disassemble and Assemble
Auxiliary, Fourth Function, or Bucket Valve Section Disassemble and Assemble
Boom Valve Section Disassemble and Assemble
Loader System and Circuit Relief Valves Disassemble and Assemble
Ride Control Valve Remove and Install
Ride Control Valve Disassemble and Assemble
Boom Cylinder Remove and Install
Bucket Cylinder Remove and Install
Boom and Bucket Cylinders Disassemble and Assemble
Boom and Bucket Cylinder Bushings Remove and Install
Pilot Control Valve Remove and Install
Pilot Control Valve Disassemble and Assemble
Quick Disconnect/Auxiliary Pilot Control Valve Remove and Install
Quick Disconnect/Auxiliary Pilot Control Valve Disassemble and Assemble
Pilot Lockout Solenoid Valve Remove and Install
Pilot Accumulator Remove and Install
Section 99: Dealer Fabricated Tools
Group 9900: Dealer Fabricated Tools
DFT1214 Hydrostatic Pump Servo Piston Snap Ring Removal and Installation Tool
DFT1254 Differential Bevel Gear Holding Tool
DFT1255 Differential Bevel Gear Pin Installation Tool

John Deere Compact Loaders 244J, 304J Repair Service Manual (TM2207)