Complete digital repair shop manual contains service, maintenance, and troubleshooting information for the 2001-2016 Mercedes-Benz S63, S63 AMG. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2001-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
Mercedes-Benz S63 - BRAKES Brakes - Maintenance - S-Class (221)
...
Fig. 3: Identifying Brake Pad Check Gauge (211 589 06 23 00)
Measurement possible at the front axle with floating caliper brake system on
Model 164, 166, 169, 172, 203, 204, 207, 209, 212, 218, 245, 246, 251
Measurement possible at the rear axle with floating caliper brake system on
Model 164, 204, 207, 212, 216, 218, 221, 230, 246, 251
Where possible measurement to be at front axle with 6-piston and rear axle with 4-piston fixed-caliper brake system on
Model 204, 209, 212, 218, 230
1. Position slide (1) on the drive plate (2).
Before each measurement position the slide (1) on the drive plate (2) in order to avoid measurement errors!
Fig. 4: Identifying Test Gauge Components
Measurement on front axle without test gauge adapter on vehicles with test bores
2. Insert measuring drift (3) in the test bore of the brake lining carrier at the outer brake pad (4).
3. Position the brake pad check gauge (010) on the brake lining carrier so that red ring (5) lies on flat.
4. Remove brake pad check gauge (010) and read off thickness of the friction lining without pad backing plate at slide (1).
Read off value on the scale with the brake lining wear symbol, otherwise a wrong value will be determined.
Fig. 5: Measuring Brake Pad Thickness
Measurement on front axle without gauge adapter On vehicles without test bores, except model 164, 166, 251
5. Position brake pad check gauge (010) on outer brake pad (4) as shown.
6. Press brake pad check gauge (010) towards the brake pad (4) until as large a part as possible of the of the red ring lies on flat.
In the process the brake pad check gauge (010) must be at right angles to the friction surface of the brake disk.
7. Remove brake pad check gauge (010) and read off thickness of the friction lining without pad backing plate at slide.
Read off value on the scale with the brake lining wear symbol, otherwise a wrong value will be determined.
Fig. 6: Positioning Brake Pad Check Gauge On Outer Brake Pad
Measurement on front axle with gauge adapter (011) for model 164, 166, 251
8. Pull check gauge adapter (011) out of the bracket (012) and connect up to the end stop on the measuring drift.
9. Mount the tip of the check gauge adapter (011) on the friction surface of the brake disk.
10. Position brake pad check gauge (010) on the floating brake caliper (6) as shown so that as large a part of the red ring (5) lies on flat.
In the process the brake pad check gauge (010) must be at right angles to the friction surface of the brake disk.
...