Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Chrysler Crossfire 2003-2008. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Chrysler Crossfire 2003-2008 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
GROUP TAB LOCATOR
Introduction
0 Lubrication & Maintenance
2 Suspension
3 Differential & Driveline
5 Brakes
6 Clutch
7 Cooling
8A Audio/Video
8B Chime/Buzzer
8E Electronic Control Modules
8F Engine Systems
8G Heated Systems
8H Horn
8I Ignition Control
8J Instrument Cluster
8L Lamps
8M Message Center
8N Power Systems
8O Restraints
8P Speed Control
8Q Vehicle Theft Security
8R Wipers/Washers
8W Wiring
9 Engine
11 Exhaust System
13 Frame & Bumpers
14 Fuel System
19 Steering
21 Transmission/Transaxle
22 Tires/Wheels
23 Body
24 Heating & Air Conditioning
25 Emissions Control
Component and System Index
PCODE Index
Service Manual Comment Forms (Rear of Manual)

ENGINE SYSTEMS
TABLE OF CONTENTS
BATTERY SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . 1
CHARGING SYSTEM. . . . . . . . . . . . . . . . . . . . . . . 24
STARTING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . 32
BATTERY SYSTEM
...
TABLE OF CONTENTS
BATTERY SYSTEM
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 2
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
DIAGNOSIS AND TESTING - BATTERY
SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . 6
SPECIAL TOOLS . . . . . . . . . . . . . . . . . . . . . . . . 7
BATTERY DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DIAGNOSIS AND TESTING - BATTERY . . . . . . . 9
STANDARD PROCEDURE
CHARGING BATTERY . . . . . . . . . . . . . . . . . . 10
STANDARD PROCEDURE - USING MICRO
420 BATTERY TESTER . . . . . . . . . . . . . . . . . 12
STANDARD PROCEDURE - OPEN-CIRCUIT
VOLTAGE TEST . . . . . . . . . . . . . . . . . . . . . . . 13
STANDARD PROCEDURE - IGNITION-OFF
DRAW TEST . . . . . . . . . . . . . . . . . . . . . . . . . 14
STANDARD PROCEDURE - CHECKING
BATTERY ELECTROLYTE LEVEL . . . . . . . . . 16
REMOVAL - BATTERY . . . . . . . . . . . . . . . . . . . 17
INSTALLATION - BATTERY . . . . . . . . . . . . . . . . 18
CABLES DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . 19
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DIAGNOSIS AND TESTING - BATTERY
CABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TRAY DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . 22
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . 23
...
CLEANING
The following information details the recommended cleaning procedures for the battery and related components. In addition to the maintenance schedules found in this service manual and the owner’s manual, it is recommended that these procedures be performed any time the battery or related components must be removed for vehicle service.
1. Clean the battery cable terminal clamps (2) of all corrosion.
Remove any corrosion using a wire terminal brush (1) or a post and terminal cleaning tool, and a sodium bicarbonate (baking soda) and warm water cleaning solution.
2. Clean the battery tray and battery hold-down hardware of all corrosion. Remove any corrosion using a wire brush and a sodium bicarbonate (baking soda) and warm water cleaning solution. Paint any exposed bare metal.
3. If the removed battery (3) is to be reinstalled, clean the outside of the battery case and the top cover with a sodium bicarbonate (baking soda) and warm water cleaning solution (2) using a stiff bristle parts cleaning brush (1) to remove any acid film. Rinse the battery with clean water.
Ensure that the cleaning solution does not enter the battery cells through the vent holes. If the battery is being replaced, refer to Battery System Specifications for the factory-installed battery specifications. Confirm that the replacement battery is the correct size and has the correct
ratings for the vehicle.
...