Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Chrysler Concorde 1993-2004. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your Chrysler Concorde 1993-2004 like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Chrysler Concorde 1993-2004 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2004 ENGINE Engine 3.5L - 300M, Concorde & Intrepid
ENGINE 3.5L
DESCRIPTION
The 3.5 Liter (214 Cubic Inches) 60 degree V-6 engines is a single overhead camshaft design with hydraulic lifters and four valves per cylinder (Fig. 1 ). The engine does not have provisions for a free wheeling valve train.
Fig. 1: 3.5L Engine
The cylinders are numbered from front to rear, with the right bank odd numbered, and the left bank even numbered (Fig. 2 ). The firing order is 1-2-3-4-5-6.
Fig. 2: Cylinder Numbering & Firing Order - 3.5L
The engine identification number is located on the rear of engine block just below the cylinder head (Fig. 3 ).
Fig. 3: Engine Identification
DIAGNOSIS AND TESTING
DIAGNOSIS AND TESTING - ENGINE DIAGNOSIS - INTRODUCTION
Engine diagnosis is helpful in determining the causes of malfunctions not detected and remedied by routine maintenance.
These malfunctions may be classified as either mechanical (e.g., a strange noise), or performance (e.g., engine idles rough and stalls).
Refer to DIAGNOSIS AND TESTING - ENGINE DIAGNOSIS - MECHANICAL and DIAGNOSIS AND TESTING - ENGINE DIAGNOSIS - PERFORMANCE , for possible causes and corrections of malfunctions.
For fuel system diagnosis, (Refer to DIAGNOSIS AND TESTING - FUEL DELIVERY SYSTEM ).
Additional tests and diagnostic procedures may be necessary for specific engine malfunctions that cannot be isolated with the Service Diagnosis charts. Information concerning additional tests and diagnosis is provided within the following:
Cylinder Compression Pressure Test
Cylinder Combustion Pressure Leakage Test
Engine Cylinder Head Gasket Failure Diagnosis
Intake Manifold Leakage Diagnosis
Hydraulic Lash Adjuster Noise Diagnosis
Engine Oil Leak Inspection
DIAGNOSIS AND TESTING - ENGINE DIAGNOSIS - MECHANICAL
...