Complete workshop & service manual with electrical wiring diagrams for Honda CB200, CL200, CB250, CL250, CJ250T, CB350, CL350, SL350, CB360, CL360, CL360K1, CJ360T Motorcycle. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

MAKE: Honda
YEAR: 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977
MODEL:

"'68-'73 250-350.pdf"
250-350 Model Shop Manual (CB250, CL250, CB350, CL350, SL350)
219 pages

"'68-'76 CB250, CB350, CL250, CL350, SL350.pdf"
250-350 Model Shop Manual (CB250, CL250, CB350, CL350, SL350)
359 pages
6228604; A3900908

"'73-'76 CB200, CL200.pdf"
CB200, CL200 Shop Manual
98 pages

"'74-'77 CB250-360, CL360_K1, CJ250T_360T.pdf"
CB250, CB360, CL360, CL360K1, CJ250T, CJ360T Shop Manual
173 pages

EXCERPT:
V. FRAME
Assembly
To assemble, reverse the disassembly procedures, paying attention to the following:
1. When the upper joints have been removed, apply a coat of thread locking agent to the tapped portion for the rear dampers.
2. Compress each rear shock absorber spring, pull the upper joint upward and secure with the spring seat stops.
3. Apply a coat of grease to the inside and outside of the rear fork center collar and to the inside of the rear fork bushing.
Install the right and left dust seal caps and install the rear fork to the frame using the rear fork pivot bolt.
Apply a coat of grease to the rear fork pivot bolt.
4. Install the right and left rear shock absorbers so that the adjusters (1) are in the same position. The standard installation position is the 1st groove mark.
...