Complete workshop & service manual with electrical wiring diagrams for Buell X1 Lightning Motorbike. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Buell X1 Lightning Motorcycle service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
INSTALLATION
1. Install backplate.
a. Apply HYLOMAR to threads of breather bolts.
b. Install air cleaner support ring and backplate using breather bolts. Tighten breather bolts to 10-15 ft-lbs (13.6-20.3 Nm).
c. Attach rear breather hose to rear breather bolt.
d. See Figure 24. Install two bolts (1), washers (2) and nuts (3) through backplate into isolator mount.
2. See Figure 21. Install breather hoses.
a. Slide rear breather hose through backplate.
b. Attach front breather hose (5, with attached tee and snorkel breather hose) to front breather bolt (6).
c. Connect rear breather hose (4) to tee fitting (3).
d. On California models, insert fresh air hose from canister through backplate.
3. See Figure 23. Apply LOCTITE THREADLOCKER 242 (blue) to screw. Install ring with screw through backplate.
Tighten to 7-9 ft-lbs (9.5-12.2 Nm).
4. See Figure 22. Apply LOCTITE THREADLOCKER 242 (blue) to screws. Fasten snorkel tube with ring and two screws. Tighten to 6-8 ft-lbs (8.1-10.8 Nm).
5. Connect snorkel hose to snorkel tube.
6. See Figure 20. Check air cleaner filter. Place filter inside filter box. Place cover assembly over backplate.
7. See Figure 19. Install screw and washer into top well nut.
8. Install screw and locknut at rear mount. Tighten to 6-8 ftlbs (8.1-10.8 Nm).
…