Click title to display cart contents.
0 Items $0.00

Ford Expedition, Lincoln Navigator 2004 Factory Service & Shop Manual




US Dollar: $19.99

Complete workshop & service manual with electrical wiring diagrams for Ford Expedition, Lincoln Navigator 2004. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Ford Expedition, Lincoln Navigator 2004 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

· U13 — Expedition, 4x2, XLS
· U14 — Expedition, 4x4, XLS
· U15 — Expedition, 4x2, XLT
· U16 — Expedition, 4x4, XLT
· U17 — Expedition, 4x2, Eddie Bauer
· U18 — Expedition, 4x4, Eddie Bauer
· U27 — Navigator, 4x2
· U28 — Navigator, 4x4

· L — 5.4L, SOHC, EFI, 2V, V-8, gas
· R — 5.4L, DOHC, EFI, 4V, gas
· W — 4.6L, SOHC, EFI, V-8, gas

2004 Expedition/Navigator
Workshop Manual
Alphabetical Index
1 2 A B C D
Table of Contents
1: General Information
00: Service Information
2: Chassis
04: Suspension
05: Driveline
06: Brake System
11: Steering System
3: Powertrain
03: Engine
07: Automatic Transmission
08: Manual Transmission, Clutch and Transfer Case
09: Exhaust System
10: Fuel System
4: Electrical
12: Climate Control System
13: Instrumentation and Warning Systems
14: Battery and Charging System
15: Audio Systems
17: Lighting
18: Electrical Distribution
19: Electronic Feature Group
5: Body and Paint
01: Body
02: Frame and Mounting

GROUP 03: Engine
SECTION 303-00: Engine System — General Information
SECTION 303-01A: Engine — 4.6L and 5.4L
SECTION 303-01B: Engine — 5.4L (4V)
SECTION 303-03: Engine Cooling
SECTION 303-04A: Fuel Charging and Controls — 4.6L (2V) and 5.4L (2V)
SECTION 303-04B: Fuel Charging and Controls — 5.4L (4V)
SECTION 303-05: Accessory Drive
SECTION 303-06: Starting System
SECTION 303-07A: Engine Ignition — 4.6L (2V) and 5.4L (2V)
SECTION 303-07B: Engine Ignition — 5.4L (4V)
SECTION 303-08: Engine Emission Control
SECTION 303-12: Intake Air Distribution and Filtering
SECTION 303-13: Evaporative Emissions
SECTION 303-14: Electronic Engine Controls

Transfer Case —4R100 Transmission
1. With the vehicle in NEUTRAL position the vehicle on a hoist. For additional information, refer to Section 100-02 .
2. Drain the fluid if the transfer case is to be disassembled.
· Install the drain plug when finished draining.
NOTE: The catalytic converter is removed for clarity.
3. Remove the transfer case-to-transmission brace.
1. Remove the bolts from the transmission.
2. Remove the nuts from the transfer case.
4. Remove the two nuts and the front driveshaft shield.
NOTE: Index-mark the driveshaft to maintain initial driveshaft balance during installation.
5. Remove the front driveshaft. For additional information, refer to Section 205-01 .
NOTE: Index-mark the driveshaft to maintain initial driveshaft balance during installation.
6. Remove the rear driveshaft. For additional information, refer to Section 205-01 .
7. Disconnect the electrical connector.

Additional 10% off on US$30+ order paid with Credit Card: 10POFF.

To pay in your local currency (EURO, GBP, AUD, CAD, HKD, JPY, etc.), please contact us.