Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Chevrolet Caprice 1977-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.
This manual for Caprice, Caprice Brougham, Caprice Brougham LS, Caprice Classic, Caprice Classic LS, Caprice Classic LTZ, Caprice Impala SS, Caprice PPV, WH Caprice, WM Caprice is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.
Automatic HVAC Description and Operation
Electrical Information Reference
Testing for Intermittent Conditions and Poor Connections
Scan Tool Reference
Control Module References for scan tool information
1. Verify DTCs B0163 and B0183 are not both set concurrently.
If both DTCs are set
Refer to Low Reference Test.
If both DTCs are not set
2. Verify DTC B0163, B0183, or B1405 is not set.
If one of the DTCs is set
Refer to the appropriate diagnostic in Circuit/System Testing (below).
If none of the DTCs are set
3. Verify the B10B Ambient Light/Sunload Sensor is accurate.
If the sensor is not accurate
1. Perform the following Circuit/System Testing in the order listed below:
Circuit/System Testing - Low Reference Test
Circuit/System Testing - DTC B0163
Circuit/System Testing - DTC B1405
Circuit/System Testing - DTC B0183
If the sensor is accurate
4. All OK.