Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Ford Fiesta 1983-2016. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Ford Fiesta 1983-2016 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2014 TRANSMISSIONS Automatic Transmission - DPS6/DCT250 - Fiesta
TRANSMISSION CONTROL MODULE (TCM) ADAPTIVE LEARNING
Check
1. The adaptive learning procedures and self-tests should be done with the VCM and Ford approved diagnostic tool.
General Equipment : Ford approved diagnostic tool
2. If the Ford approved diagnostic tool does not communicate with the VCM :
check the VCM connection to the vehicle
check the Ford approved diagnostic tool connection to the VCM
to diagnose no power to the Ford approved diagnostic tool, Refer to: COMMUNICATIONS NETWORK .
3. If the Ford approved diagnostic tool does not communicate with the vehicle:
verify the ignition is in the RUN position
verify Ford approved diagnostic tool operation with a known good vehicle
to diagnose no power to the Ford approved diagnostic tool, Refer to: COMMUNICATIONS NETWORK .
4. Carry out the network test.
If the Ford approved diagnostic tool responds with no communication from one or more
modules, Refer to: COMMUNICATIONS NETWORK .
If the network test passes, continue with the transmission adaptive learning procedures.
5. Verify that the calibration file is present on the scan tool. If the file is present, reconnect the scan tool to the vehicle. If the file is not present, download the file from Ford service website.
...