John Deere 210L / 210L EP Tractor Loader is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices. This document is printable, without restrictions, contains searchable text, bookmarks, crosslinks for easy navigation.

cxt13663 - John Deere 210L Tractor Loader.pdf
cxt15170 - John Deere Cargadora de tractor 210L.pdf
cxt15169 - John Deere 210L Chargeur du tracteur.pdf

cxt17453 - John Deere 284 and 288 Box Blade (PIN 1T8284BB_ _ _122158— ) (PIN 1T8288BB_ _ _122002— ).pdf
cxt17454 - John Deere 284 y 288 Hoja cuadrada (PIN: 1T8284BB_ _ _122158— ) (PIN: 1T8288BB_ _ _122002— ).pdf
cxt17509 - John Deere Lame décapeuse 284 et 288 (NIP: 1T8284BB_ _ _122158— ) (NIP: 1T8288BB_ _ _122002— ).pdf

cxt25308 - John Deere 210L EP Tractor Loader.pdf
cxt25310 - John Deere 210L EP Cargadora del tractor.pdf
cxt25309 - John Deere Chargeur du tracteur 210L EP.pdf

cxt15143 - John Deere 210L EP Tractor Loader.pdf
cxt16473 - John Deere 210L EP Cargadora del tractor.pdf
cxt16472 - John Deere Chargeur du tracteur 210L EP.pdf

Category: Operator's Manual
Language: English Spanish French
Published on 2019/06/26

cxt13663 - 210L Tractor Loader................2
  TABLE OF CONTENTS................2
  Section 1-1: Safety—Safety and Operator Conveniences................46
    Safety and Operator Convenience Features................47
  Section 1-2: Safety—General Precautions................48
    Information for European Union Directives and Eurasian Economic Union Technical Regulations Compliance................49
    Recognize Safety Information................53
    Follow Safety Instructions................54
    Operate Only If Qualified................55
    Wear Protective Equipment................56
    Protect Against Noise................57
    Avoid Unauthorized Machine Modifications................58
    Inspect Machine................59
    Stay Clear of Moving Parts................60
    Avoid High-Pressure Fluids................61
    Avoid High-Pressure Oils................62
    Work In Ventilated Area................63
    Avoid Static Electricity Risk When Refueling................64
    High Debris Applications................66
    Prevent Fires................67
    In Case of Machine Fire................68
    Prevent Battery Explosions................69
    Handle Chemical Products Safely................70
    Handle Starting Fluid Safely................71
    Decommissioning — Proper Recycling and Disposal of Fluids and Components................72
    Exhaust Filter Ash Handling and Disposal................73
    Prepare for Emergencies................74
    Clean Debris from Machine................75
  Section 1-3: Safety—Operating Precautions................76
    Use Steps and Handholds Correctly................77
    Start Only From Operator's Seat................78
    Use and Maintain Seat Belt................79
    Prevent Unintended Machine Movement................80
    Avoid Work Site Hazards................81
    Keep Riders Off Machine................82
    Avoid Machine Tipover................83
    Avoid Power Lines................84
    Avoid Backover Accidents................85
    Operating on Slopes................86
    Operating or Traveling On Public Roads................87
    Inspect and Maintain ROPS................88
    Travel Safely................89
    Prevent Acid Burns................90
    Add and Operate Attachments Safely................92
    Use Special Care When Operating................93
    Stay Clear of Rotating Drivelines................94
  Section 1-4: Safety—Maintenance Precautions................96
    Park and Prepare for Service Safely................97
    Service Cooling System Safely................98
    Service Machines Safely................99
    Service Accumulator Systems Safely................100
    Remove Paint Before Welding or Heating................101
    Make Welding Repairs Safely................102
    Drive Metal Pins Safely................103
    Service Tires Safely................104
    Use Proper Lifting Equipment................105
    Clean Exhaust Filter Safely................106
  Section 1-5: Safety—Safety Signs and Other Instructions................110
    Safety Signs and Other Instructions................110
  Section 2-1: Operation—Operator’s Station................120
    Engagement and Monitor Unit (EMU) Functions................121
    Fire Extinguisher Mounting Location................126
    Security System................127
    Front Console Functions................129
    Right Console Functions................132
    Dome Light Operation—Cab Machines................133
    Control Illumination Light Operation—Cab Machines................134
    Steering Console Controls................135
    Engine Speed Control Knob................137
    Defroster, Heater, and Air Conditioner Controls—If Equipped................138
    Radio—If Equipped................139
    Seat Controls................146
    Steering Wheel Tilt Lever—If Equipped................148
    Accessory Power Outlets................149
    Vandal Protection—Canopy Machines................150
    Opening Windows—Cab Machines................151
    Windshield Wiper and Washer Operation—Cab Machines................152
    Loader Controls................153
  Section 2-2: Operation—Operating the Machine................154
    Before Starting Work................155
    Inspect Machine Daily Before Starting................156
    Check Instruments Before Starting................157
    Engine Break-In Period................159
    Starting the Engine................472
    Cold Start Aid—Engine Block Heater—If Equipped................163
    Cold Start Aid—Air Intake Heater................164
    Engine Warm-Up................165
    Cold Weather Engine Warm-Up................166
    Driving the Machine................167
    Required Machine Stop Warning................169
    Ride Control Operation—If Equipped................172
    Exhaust Filter................174
    Selective Catalytic Reduction (SCR) System Overview................178
    US EPA Qualified Emergency Use — SCR Derate Override Option................180
    EU Qualified Emergency Use — SCR Derate Override Option................182
    Service ADVISOR™ Remote (SAR) Software Delivery Process................184
    Economy Mode Operation—If Equipped................185
    Power-Takeoff (PTO) Operation—If Equipped................186
    3-Point Hitch Operation................187
    Loader Operation................189
    Loader Clutch Disconnect Operation................191
    Loader Auxiliary Hydraulic Operation—If Equipped................192
    Differential Lock Operation................194
    Mechanical Front Wheel Drive (MFWD) Operation................195
    Loader Coupler Operation—If Equipped................198
    Operating in Water and Mud................200
    Lifting Objects................201
    Parking Machine................202
    Loading Machine Onto Trailer................203
    Towing................205
  Section 2-3: Operation—Monitor Operation................208
    Aftertreatment Indicators Overview................209
    Engagement and Monitor Unit (EMU)................211
    Main Menu................212
    Operation—Exhaust Filter................214
    Operation—Exhaust Filter Auto Cleaning................215
    Operation—Exhaust Filter Parked Cleaning................216
    Operation—Exhaust Filter Emergency Override................218
    Operation—Job Timer................219
    Operation—Software Update................494
    Operation—Software Version................221
    Diagnostics—Codes................222
    Setup—Monitor................223
    Setup—Security................224
    Setup—Economy Mode................227
    Setup—Hydraulics................228
    Setup—Transmission................229
  Section 3-1: Maintenance—Machine................230
    Required Emission-Related Information................232
    Diesel Fuel................233
    Diesel Fuel Specifications................235
    Lubricity of Diesel Fuel................236
    Handling and Storing Diesel Fuel................237
    Biodiesel Fuel................238
    Testing Diesel Fuel................240
    Supplemental Diesel Fuel Additives................241
    Fuel Filters................242
    Minimizing the Effect of Cold Weather on Diesel Engines................243
    Diesel Exhaust Fluid (DEF) — Use in Selective Catalytic Reduction (SCR) Equipped Engines................245
    Refilling Diesel Exhaust Fluid (DEF) Tank................246
    Testing Diesel Exhaust Fluid (DEF)................248
    Storing Diesel Exhaust Fluid (DEF)................249
    Disposal of Diesel Exhaust Fluid (DEF)................250
    John Deere Break-In Plus™ Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V................251
    Diesel Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V................252
    Engine Oil and Filter Service Intervals — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V Engines................254
    Diesel Engine Oil Service Interval for Operation at High Altitude................256
    Oil Filters................257
    Alternative and Synthetic Lubricants................258
    Hydraulic Oil................259
    Transmission, Axles, and Mechanical Front Wheel Drive (MFWD) Oil................261
    Grease................262
    PTO Gear Case Oil—If Equipped................263
    Lubricant Storage................264
    Mixing of Lubricants................265
    Diesel Engine Coolant (engine with wet sleeve cylinder liners)................266
    Water Quality for Mixing with Coolant Concentrate................268
    Operating in Warm Temperature Climates................269
    Testing Coolant Freeze Point................270
    Disposing of Coolant................272
  Section 3-2: Maintenance—Periodic Maintenance................273
    Service Machine at Specified Intervals................274
    Check Hour Meter Regularly................275
    Prepare Machine for Maintenance................276
    Fuel Tank................277
    Loader Boom Service Lock................278
    Opening and Closing Engine Hood................279
    Battery Disconnect—If Equipped................281
    Fluid Analysis Program Test Kits and 3-Way Coolant Test Kit................282
    Service Intervals................283
    Required Parts................285
    Maintenance Legend................287
  Section 3-3: Maintenance—As Required................289
    Inspect Tires and Check Pressure................290
    Tire Pressures................292
    Check Wheel Fasteners................293
    Replace Cab Fresh Air and Recirculation Filters—If Equipped................294
    Drain Water and Sediment From Fuel Filters................296
    Replace Primary and Secondary Engine Air Filter Elements................297
    Check Air Conditioning System Refrigerant Charge—If Equipped................299
    Check Air Conditioning System Oil Charge—If Equipped................300
    Inspect and Clean Cooling System................301
    Lubricate Non-Powered Front Wheel Bearings—If Equipped................304
    Check Windshield Washer Fluid Level—If Equipped................305
  Section 3-4: Maintenance—Every 10 Hours or Daily................306
    Check Engine Coolant Level................307
    Check Hydraulic System Oil Level................309
    Check Engine Oil Level................310
    Lubricate Loader Pivots................312
    Lubricate 3-Point Hitch Pivots................314
    Lubricate Front Axle Pivot Pin................315
    Lubricate Ripper Pivots................316
    Lubricate Mechanical Front Wheel Drive (MFWD) Axle and Universal Joints—If Equipped................317
    Lubricate Non-Powered Front Axle Steering Pivots—If Equipped................318
    Lubricate Multipurpose Bucket Pivots—If Equipped................319
    Lubricate Loader Quick Coupler—If Equipped................320
  Section 3-5: Maintenance—Every 250 Hours................321
    Take Engine Oil Sample................322
    Check MFWD Axle Planetary Housing Oil Level—If Equipped................323
    Check MFWD Axle Oil Housing Level—If Equipped................324
    Check Rear Axle Oil Level................325
    Check Transmission Oil Level................326
    Lubricate MFWD Drive Shaft Spline—If Equipped................327
    Drain and Refill Engine Oil and Replace Filter................334
  Section 3-6: Maintenance—Every 500 Hours................330
    Take Fluid Samples................331
    Check Air Intake Hose................332
    Drain Water and Sediment From Fuel Tank................333
    Drain and Refill Engine Oil and Replace Filter................334
    Replace Fuel Filters................336
  Section 3-7: Maintenance—Every 1000 Hours................337
    Check Coolant Condition................338
    Clean, Pack, and Adjust Non-Powered Front Wheel Bearings—If Equipped................339
    Drain and Refill Transmission Oil and Replace Filter................341
    Replace Hydraulic Oil Filter................343
    Replace Power-Takeoff (PTO) Filter—If Equipped................344
    Replace Hydraulic Tank Breather................345
    Inspect and Clean Fuel Tank Breather................346
    Inspect Accessory Drive Belt................347
  Section 3-8: Maintenance—Every 2000 Hours................349
    Drain and Refill MFWD Axle Planetary Housing Oil—If Equipped................350
    Drain and Refill MFWD Axle Housing Oil—If Equipped................351
    Drain and Refill Rear Axle and Planetary Housing Oil................352
    Inspect and Clean Hydraulic Tank Fill Screen................354
    Replace Open Crankcase Ventilation (OCV) Filter................355
    Drain and Refill Hydraulic Tank Oil................356
    Access Diesel Exhaust Fluid (DEF) Dosing Unit Filter................358
    Replace Diesel Exhaust Fluid (DEF) Dosing Unit Filter................359
    Clean or Replace Diesel Exhaust Fluid (DEF) Tank Fill Screen (S.N. —894000)................361
  Section 3-9: Maintenance—Every 3000 Hours................363
    Check and Adjust Engine Valve Lash................364
  Section 3-10: Maintenance—Every 4000 Hours................365
    Replace Diesel Exhaust Fluid (DEF) Tank Breather................366
    Replace Diesel Exhaust Fluid (DEF) Header Suction Filter................367
    Replace Diesel Exhaust Fluid (DEF) Baffle................368
    Clean Diesel Exhaust Fluid (DEF) Tank................369
  Section 3-11: Maintenance—Every 6000 Hours................370
    Draining the Cooling System................371
    Filling the Cooling System................373
  Section 4-1: Miscellaneous—Machine................375
    Changing Loader Buckets................518
    Checking Coolant Hoses and Radiator................379
    Replace Coolant Filter................380
    Hydraulic Circuit Pressure Release................381
    Checking Ride Control Accumulator—If Equipped................383
    Checking Starting System................385
    Discharge Ride Control System Hydraulic Pressure—If Equipped................386
    Hitch Weight—If Equipped................388
    Inspect Loader Boom Service Lock................389
    Toe-In Check and Adjust................390
    Steering Angle Check and Adjust................392
    Adding Front Counterweights................394
    Fuel System Bleed Procedure................395
    Service Brake Bleed Procedure................396
    Do Not Service Control Valves, Cylinders, Pumps, or Motors................403
    Precautions for Alternator and Regulator................404
    Handling, Checking, and Servicing Batteries Carefully................405
    Using Battery Charger................408
    Using Booster Batteries—12-Volt System................410
    Removing Batteries................411
    Replacing Batteries................412
    Replacing Fuses................413
    Welding on Machine................419
    Keep Electronic Control Unit Connectors Clean................420
    Check Park Brake................421
    External Service Brake Inspection................422
    Using Single Position Drawbar................424
    Keep ROPS Installed Properly................425
    JDLink™ Machine Monitoring System (MMS)—If Equipped................426
    Remove and Install Halogen Bulbs................427
    Hardware Torque Specifications................429
    Unified Inch Bolt and Screw Torque Values................430
    Metric Bolt and Screw Torque Values................432
  Section 4-2: Miscellaneous—Operational Checkout................434
    Operational Checkout Procedure................435
  Section 4-3: Miscellaneous—Troubleshooting................470
    Troubleshooting Procedure................471
    Engine................472
    Electrical System................477
    Hydraulic System................484
    Steering System................487
    Power Train................488
    MFWD................490
    Rear Axle................491
    Air Conditioning—If Equipped................493
    Software Update................494
  Section 4-4: Miscellaneous—Storage................495
    Prepare Machine for Storage................496
    Monthly Storage Procedure................498
    Preparing Engine for Long-Term Storage................500
    Removing Engine From Long-Term Storage................502
  Section 4-5: Miscellaneous—Machine Numbers................503
    Record Product Identification Number (PIN)................504
    Record Engine Serial Number................505
    Record Transmission Serial Number................506
    Record Rear Axle Housing Serial Number................507
    Record Mechanical Front Wheel Drive (MFWD) Axle Housing Serial Number................508
    Keep Proof of Ownership................509
    Keep Machines Secure................510
  Section 4-6: Miscellaneous—Specifications................511
    Engine Specifications................512
    Travel Speeds................513
    Drain and Refill Capacities................514
    Machine Dimensions................515
    Machine Weights................517
    Buckets................518
    Machine Design Life................519
    Eurasian Economic Union................520
cxt15143 - 210L EP Tractor Loader................533
  TABLE OF CONTENTS................533
  Section 1-1: Safety—Safety and Operator Conveniences................576
    Safety and Operator Convenience Features................577
  Section 1-2: Safety—General Precautions................578
    Information for European Union Directives and Eurasian Economic Union Technical Regulations Compliance................579
    Recognize Safety Information................583
    Follow Safety Instructions................584
    Operate Only If Qualified................585
    Wear Protective Equipment................586
    Protect Against Noise................587
    Avoid Unauthorized Machine Modifications................588
    Inspect Machine................589
    Stay Clear of Moving Parts................590
    Avoid High-Pressure Fluids................591
    Avoid High-Pressure Oils................592
    Work In Ventilated Area................593
    Avoid Static Electricity Risk When Refueling................594
    High Debris Applications................596
    Prevent Fires................597
    In Case of Machine Fire................598
    Prevent Battery Explosions................599
    Handle Chemical Products Safely................600
    Handle Starting Fluid Safely................601
    Decommissioning — Proper Recycling and Disposal of Fluids and Components................602
    Prepare for Emergencies................603
    Clean Debris from Machine................604
  Section 1-3: Safety—Operating Precautions................605
    Use Steps and Handholds Correctly................606
    Start Only From Operator's Seat................607
    Use and Maintain Seat Belt................608
    Prevent Unintended Machine Movement................609
    Avoid Work Site Hazards................610
    Keep Riders Off Machine................611
    Avoid Machine Tipover................612
    Avoid Power Lines................613
    Avoid Backover Accidents................614
    Operating on Slopes................615
    Operating or Traveling On Public Roads................616
    Inspect and Maintain ROPS................617
    Travel Safely................618
    Prevent Acid Burns................619
    Add and Operate Attachments Safely................621
    Use Special Care When Operating................622
  Section 1-4: Safety—Maintenance Precautions................623
    Park and Prepare for Service Safely................624
    Service Cooling System Safely................625
    Service Machines Safely................626
    Service Accumulator Systems Safely................627
    Remove Paint Before Welding or Heating................628
    Make Welding Repairs Safely................629
    Drive Metal Pins Safely................630
    Service Tires Safely................631
    Use Proper Lifting Equipment................632
  Section 1-5: Safety—Safety Signs and Other Instructions................634
    Safety Signs and Other Instructions................634
  Section 2-1: Operation—Operator’s Station................644
    Engagement and Monitor Unit (EMU) Functions................645
    Fire Extinguisher Mounting Location................650
    Security System................651
    Front Console Functions................653
    Right Console Functions................656
    Dome Light Operation—Cab Machines................657
    Control Illumination Light Operation—Cab Machines................658
    Steering Console Controls................659
    Engine Speed Control Knob................661
    Defroster, Heater, and Air Conditioner Controls—If Equipped................662
    Radio—If Equipped................663
    Seat Controls................670
    Steering Wheel Tilt Lever—If Equipped................672
    Accessory Power Outlets................673
    Vandal Protection—Canopy Machines................674
    Opening Windows—Cab Machines................675
    Windshield Wiper and Washer Operation—Cab Machines................676
    Loader Controls................677
  Section 2-2: Operation—Operating the Machine................678
    Before Starting Work................679
    Inspect Machine Daily Before Starting................680
    Check Instruments Before Starting................681
    Engine Break-In Period................683
    Starting the Engine................944
    Cold Start Aid—Starting Fluid—If Equipped................687
    Cold Start Aid—Engine Block Heater—If Equipped................689
    Engine Warm-Up................690
    Cold Weather Engine Warm-Up................691
    Driving the Machine................692
    Ride Control Operation—If Equipped................694
    Service ADVISOR™ Remote (SAR) Software Delivery Process................696
    Economy Mode Operation—If Equipped................697
    3-Point Hitch Operation................698
    Loader Operation................700
    Loader Clutch Disconnect Operation................702
    Loader Auxiliary Hydraulic Operation—If Equipped................703
    Differential Lock Operation................705
    Mechanical Front Wheel Drive (MFWD) Operation................706
    Loader Coupler Operation—If Equipped................709
    Operating in Water and Mud................711
    Lifting Objects................712
    Parking Machine................713
    Loading Machine Onto Trailer................714
    Towing................716
  Section 2-3: Operation—Monitor Operation................719
    Engagement and Monitor Unit (EMU)................720
    Main Menu................721
    Operation—Job Timer................723
    Operation—Software Update................966
    Operation—Software Version................725
    Diagnostics—Codes................726
    Setup—Monitor................727
    Setup—Security................728
    Setup—Economy Mode................731
    Setup—Hydraulics................732
    Setup—Transmission................733
  Section 3-1: Maintenance—Machine................734
    Required Emission-Related Information................735
    Diesel Fuel................736
    Lubricity of Diesel Fuel................738
    Handling and Storing Diesel Fuel................739
    Biodiesel Fuel................740
    Testing Diesel Fuel................742
    Supplemental Diesel Fuel Additives................743
    Fuel Filters................744
    Minimizing the Effect of Cold Weather on Diesel Engines................745
    Diesel Engine Break-In™ Oil................747
    Diesel Engine Oil — Tier 3 and Stage IIIA................748
    Diesel Engine Oil Service Interval for Operation at High Altitude................750
    Oil Filters................751
    Alternative and Synthetic Lubricants................752
    Hydraulic Oil................753
    Transmission, Axles, and Mechanical Front Wheel Drive (MFWD) Oil................755
    Grease................756
    Lubricant Storage................757
    Mixing of Lubricants................758
    Diesel Engine Coolant (engine with wet sleeve cylinder liners)................759
    Water Quality for Mixing with Coolant Concentrate................761
    Operating in Warm Temperature Climates................762
    Testing Coolant Freeze Point................763
    Disposing of Coolant................765
  Section 3-2: Maintenance—Periodic Maintenance................766
    Service Machine at Specified Intervals................767
    Check Hour Meter Regularly................768
    Prepare Machine for Maintenance................769
    Fuel Tank................770
    Loader Boom Service Lock................771
    Opening and Closing Engine Hood................772
    Battery Disconnect—If Equipped................774
    Fluid Analysis Program Test Kits and 3-Way Coolant Test Kit................775
    Service Intervals................776
    Required Parts................778
    Maintenance Legend................780
  Section 3-3: Maintenance—As Required................782
    Inspect Tires and Check Pressure................783
    Tire Pressures................785
    Check Wheel Fasteners................786
    Replace Cab Fresh Air and Recirculation Filters—If Equipped................787
    Drain Water and Sediment From Fuel Filters................789
    Replace Primary and Secondary Engine Air Filter Elements................790
    Inspect and Clean Cooling System................792
    Check Windshield Washer Fluid Level—If Equipped................797
  Section 3-4: Maintenance—Every 10 Hours or Daily................798
    Check Engine Coolant Level................799
    Check Hydraulic System Oil Level................801
    Check Engine Oil Level................802
    Lubricate Loader Pivots................804
    Lubricate 3-Point Hitch Pivots................806
    Lubricate Front Axle Pivot Pin................807
    Lubricate Ripper Pivots................808
    Lubricate MFWD Axle and Universal Joints................809
    Lubricate Multipurpose Bucket Pivots—If Equipped................810
    Lubricate Loader Quick Coupler—If Equipped................811
  Section 3-5: Maintenance—Every 250 Hours................812
    Take Engine Oil Sample................813
    Check MFWD Planetary Housing Oil Level................814
    Check MFWD Axle Oil Level................815
    Check Rear Axle Oil Level................816
    Check Transmission Oil Level................817
    Lubricate MFWD Drive Shaft Spline................818
    Drain and Refill Engine Oil and Replace Filter................825
  Section 3-6: Maintenance—Every 500 Hours................821
    Take Fluid Samples................822
    Check Air Intake Hose................823
    Drain Water and Sediment From Fuel Tank................824
    Drain and Refill Engine Oil and Replace Filter................825
    Replace Fuel Filters................827
    Clean Engine Crankcase Ventilation Tube................829
  Section 3-7: Maintenance—Every 1000 Hours................830
    Check Coolant Condition................831
    Drain and Refill Transmission Oil and Replace Filter................832
    Replace Hydraulic Oil Filter................834
    Replace Hydraulic Tank Breather................835
    Inspect Accessory Drive Belt................836
  Section 3-8: Maintenance—Every 2000 Hours................838
    Drain and Refill MFWD Planetary Housing Oil................839
    Drain and Refill MFWD Axle Housing Oil................840
    Drain and Refill Rear Axle and Planetary Housing Oil................841
    Inspect and Clean Hydraulic Tank Fill Screen................843
    Drain and Refill Hydraulic Tank Oil................844
  Section 3-9: Maintenance—Every 3000 Hours................846
    Check and Adjust Engine Valve Lash................847
  Section 3-10: Maintenance—Every 6000 Hours................848
    Draining the Cooling System................849
    Filling the Cooling System................851
  Section 4-1: Miscellaneous—Machine................853
    Changing Loader Buckets................987
    Checking Coolant Hoses and Radiator................856
    Hydraulic Circuit Pressure Release................857
    Checking Ride Control Accumulator—If Equipped................859
    Checking Starting System................861
    Discharge Ride Control System Hydraulic Pressure—If Equipped................862
    Hitch Weight—If Equipped................864
    Inspect Loader Boom Service Lock................865
    Toe-In Check and Adjust................866
    Steering Angle Check and Adjust................868
    Adding Front Counterweights................870
    Fuel System Bleed Procedure................871
    Service Brake Bleed Procedure................872
    Do Not Service Control Valves, Cylinders, Pumps, or Motors................876
    Precautions for Alternator and Regulator................877
    Handling, Checking, and Servicing Batteries Carefully................878
    Using Battery Charger................881
    Using Booster Batteries—12-Volt System................883
    Removing Batteries................884
    Replacing Batteries................885
    Replacing Fuses................886
    Welding on Machine................891
    Keep Electronic Control Unit Connectors Clean................892
    Check Park Brake................893
    External Service Brake Inspection................894
    Using Single Position Drawbar................896
    Keep ROPS Installed Properly................897
    JDLink™ Machine Monitoring System (MMS)—If Equipped................898
    Remove and Install Halogen Bulbs................899
    Hardware Torque Specifications................901
    Unified Inch Bolt and Screw Torque Values................902
    Metric Bolt and Screw Torque Values................904
  Section 4-2: Miscellaneous—Operational Checkout................906
    Operational Checkout Procedure................907
  Section 4-3: Miscellaneous—Troubleshooting................942
    Troubleshooting Procedure................943
    Engine................944
    Electrical System................949
    Hydraulic System................956
    Steering System................959
    Power Train................960
    MFWD................962
    Rear Axle................963
    Air Conditioning—If Equipped................965
    Software Update................966
  Section 4-4: Miscellaneous—Storage................967
    Prepare Machine for Storage................968
    Monthly Storage Procedure................970
  Section 4-5: Miscellaneous—Machine Numbers................972
    Record Product Identification Number (PIN)................973
    Record Engine Serial Number................974
    Record Transmission Serial Number................975
    Record Rear Axle Housing Serial Number................976
    Record Mechanical Front Wheel Drive (MFWD) Axle Housing Serial Number................977
    Keep Proof of Ownership................978
    Keep Machines Secure................979
  Section 4-6: Miscellaneous—Specifications................980
    Engine Specifications................981
    Travel Speeds................982
    Drain and Refill Capacities................983
    Machine Dimensions................984
    Machine Weights................986
    Buckets................987
    Machine Design Life................988
    Eurasian Economic Union................989
cxt17453 - 284 and 288 Box Blade (PIN 1T8284BB_ _ _122158— ) (PIN 1T8288BB_ _ _122002— )................1001
  TABLE OF CONTENTS................1001
  Section 1-1: Safety—Safety and Operator Conveniences................1006
    Safety and Operator Convenience Features................1007
  Section 1-2: Safety—General Precautions................1008
    Recognize Safety Information................1009
    Follow Safety Instructions................1010
    Operate Only If Qualified................1011
    Wear Protective Equipment................1012
    Avoid Unauthorized Attachment Modifications................1013
    Protect Against Flying Debris................1014
    Inspect Attachment................1015
    Stay Clear Of Moving Parts................1016
    Avoid High-Pressure Fluids................1017
    Avoid High-Pressure Oils................1018
    Dispose of Waste Properly................1019
    Add Cab Guarding for Special Uses................1020
  Section 1-3: Safety—Operating Precautions................1021
    Use Steps and Handholds Correctly................1022
    Start Only From Operator's Seat................1023
    Prevent Unintended Machine Movement................1024
    Avoid Work Site Hazards................1025
    Keep Riders Off Attachment................1026
    Avoid Machine Tipover................1027
    Add and Operate Attachments Safely................1028
    Use Special Care When Operating................1029
  Section 1-4: Safety—Maintenance Precautions................1030
    Remove Paint Before Welding or Heating................1031
    Make Welding Repairs Safely................1032
    Drive Metal Pins Safely................1033
    Practice Safe Maintenance................1034
  Section 1-5: Safety—Safety Signs and Other Instructions................1036
    Safety Signs and Other Instructions................1036
  Section 2-1: Operation—Preparing Attachment................1038
    Initial Inspection................1039
    Matching Machine to Box Blade................1040
    Machine Hydraulic System................1041
  Section 2-2: Operation—Install Attachment................1042
    Attaching Box Blade to Machine................1043
    Detaching Box Blade From Machine................1045
  Section 2-3: Operation—Operating Attachment................1047
    Operating Auxiliary Hydraulics................1048
    Box Blade Operation................1049
    Scarifier Bar Travel Position................1051
    Shank Depth Adjustment................1053
  Section 3-1: Maintenance—Attachment................1054
    Recommended Daily Inspection................1055
    Service—Every 10 Hours................1056
    Service—Every 250 Hours................1057
  Section 3-2: Maintenance—Miscellaneous................1058
    Welding on Machine................1059
    Hardware Torque Specifications................1060
    Unified Inch Bolt and Screw Torque Values................1061
    Metric Bolt and Screw Torque Values................1064
  Section 4-1: Miscellaneous—Storage................1066
    Prepare Attachment for Storage................1067
    Remove Attachment From Storage................1068
  Section 4-2: Miscellaneous—Attachment Number................1069
    Record Product Identification Number (PIN)................1070
    Product Identification Number (PIN) Plate Location................1071
  Section 4-3: Miscellaneous—Specifications................1072
    Box Blade Specifications................1073
cxt25308 - 210L EP Tractor Loader................1077
  TABLE OF CONTENTS................1077
  Section 1-1: Safety—Safety and Operator Conveniences................1111
    Safety and Operator Convenience Features................1112
  Section 1-2: Safety—General Precautions................1113
    Information for European Union Directives and Eurasian Economic Union Technical Regulations Compliance................1114
    Recognize Safety Information................1118
    Follow Safety Instructions................1119
    Operate Only If Qualified................1120
    Wear Protective Equipment................1121
    Protect Against Noise................1122
    Avoid Unauthorized Machine Modifications................1123
    Inspect Machine................1124
    Stay Clear of Moving Parts................1125
    Avoid High-Pressure Fluids................1126
    Avoid High-Pressure Oils................1127
    Work In Ventilated Area................1128
    Avoid Static Electricity Risk When Refueling................1129
    High Debris Applications................1131
    Prevent Fires................1132
    In Case of Machine Fire................1133
    Prevent Battery Explosions................1134
    Handle Chemical Products Safely................1135
    Handle Starting Fluid Safely................1136
    Decommissioning — Proper Recycling and Disposal of Fluids and Components................1137
    Exhaust Filter Ash Handling and Disposal................1138
    Prepare for Emergencies................1139
    Clean Debris from Machine................1140
  Section 1-3: Safety—Operating Precautions................1141
    Use Steps and Handholds Correctly................1142
    Start Only From Operator's Seat................1143
    Use and Maintain Seat Belt................1144
    Prevent Unintended Machine Movement................1145
    Avoid Work Site Hazards................1146
    Keep Riders Off Machine................1147
    Avoid Machine Tipover................1148
    Avoid Power Lines................1149
    Avoid Backover Accidents................1150
    Operating on Slopes................1151
    Operating or Traveling On Public Roads................1152
    Inspect and Maintain ROPS................1153
    Travel Safely................1154
    Prevent Acid Burns................1155
    Add and Operate Attachments Safely................1157
    Use Special Care When Operating................1158
  Section 1-4: Safety—Maintenance Precautions................1159
    Park and Prepare for Service Safely................1160
    Service Cooling System Safely................1161
    Service Machines Safely................1162
    Service Accumulator Systems Safely................1163
    Remove Paint Before Welding or Heating................1164
    Make Welding Repairs Safely................1165
    Drive Metal Pins Safely................1166
    Service Tires Safely................1167
    Use Proper Lifting Equipment................1168
    Clean Exhaust Filter Safely................1169
  Section 1-5: Safety—Safety Signs and Other Instructions................1173
    Safety Signs and Other Instructions................1173
  Section 2-1: Operation—Operator’s Station................1183
    Engagement and Monitor Unit (EMU) Functions................1184
    Fire Extinguisher Mounting Location................1189
    Security System................1190
    Front Console Functions................1192
    Right Console Functions................1195
    Dome Light Operation—Cab Machines................1196
    Control Illumination Light Operation—Cab Machines................1197
    Steering Console Controls................1198
    Engine Speed Control Knob................1200
    Defroster, Heater, and Air Conditioner Controls—If Equipped................1201
    Radio—If Equipped................1202
    Seat Controls................1209
    Steering Wheel Tilt Lever—If Equipped................1211
    Accessory Power Outlets................1212
    Vandal Protection—Canopy Machines................1213
    Opening Windows—Cab Machines................1214
    Windshield Wiper and Washer Operation—Cab Machines................1215
    Loader Controls................1216
  Section 2-2: Operation—Operating the Machine................1217
    Before Starting Work................1218
    Inspect Machine Daily Before Starting................1219
    Check Instruments Before Starting................1220
    Engine Break-In Period................1222
    Starting the Engine................1487
    Cold Start Aid—Engine Block Heater—If Equipped................1226
    Cold Start Aid—Glow Plugs................1227
    Engine Warm-Up................1228
    Cold Weather Engine Warm-Up................1229
    Driving the Machine................1230
    Required Machine Stop Warning................1232
    Ride Control Operation—If Equipped................1235
    Service ADVISOR™ Remote (SAR) Software Delivery Process................1237
    3-Point Hitch Operation................1238
    Loader Operation................1240
    Loader Clutch Disconnect Operation................1242
    Loader Auxiliary Hydraulic Operation—If Equipped................1243
    Differential Lock Operation................1245
    Mechanical Front Wheel Drive (MFWD) Operation................1246
    Loader Coupler Operation—If Equipped................1249
    Operating in Water and Mud................1251
    Lifting Objects................1252
    Parking Machine................1253
    Loading Machine Onto Trailer................1254
    Towing................1256
  Section 2-3: Operation—Monitor Operation................1259
    Engagement and Monitor Unit (EMU)................1260
    Main Menu................1261
    Operation—Job Timer................1263
    Operation—Software Update................1509
    Operation—Software Version................1265
    Diagnostics—Codes................1266
    Setup—Monitor................1267
    Setup—Security................1268
    Setup—Hydraulics................1271
  Section 3-1: Maintenance—Machine................1272
    Required Emission-Related Information................1273
    Diesel Fuel................1274
    Lubricity of Diesel Fuel................1276
    Handling and Storing Diesel Fuel................1277
    Biodiesel Fuel................1278
    Testing Diesel Fuel................1280
    Supplemental Diesel Fuel Additives................1281
    Fuel Filters................1282
    Minimizing the Effect of Cold Weather on Diesel Engines................1283
    Diesel Engine Oil — Interim Tier 4, Final Tier 4, Stage IIIB, Stage IV, and Stage V................1285
    Diesel Engine Oil Service Interval for Operation at High Altitude................1287
    Oil Filters................1288
    Alternative and Synthetic Lubricants................1289
    Hydraulic Oil................1290
    Transmission, Axles, and Mechanical Front Wheel Drive (MFWD) Oil................1292
    Grease................1293
    Lubricant Storage................1294
    Mixing of Lubricants................1295
    Diesel Engine Coolant (engine with wet sleeve cylinder liners)................1296
    Water Quality for Mixing with Coolant Concentrate................1298
    Operating in Warm Temperature Climates................1299
    Testing Coolant Freeze Point................1300
    Disposing of Coolant................1302
  Section 3-2: Maintenance—Periodic Maintenance................1303
    Service Machine at Specified Intervals................1304
    Check Hour Meter Regularly................1305
    Prepare Machine for Maintenance................1306
    Fuel Tank................1307
    Loader Boom Service Lock................1308
    Opening and Closing Engine Hood................1309
    Battery Disconnect—If Equipped................1311
    Fluid Analysis Program Test Kits and 3-Way Coolant Test Kit................1312
    Service Intervals................1313
    Required Parts................1315
    Maintenance Legend................1317
  Section 3-3: Maintenance—As Required................1319
    Inspect Tires and Check Pressure................1320
    Tire Pressures................1322
    Check Wheel Fasteners................1323
    Replace Cab Fresh Air and Recirculation Filters—If Equipped................1324
    Drain Water and Sediment From Fuel Filters................1326
    Replace Primary and Secondary Engine Air Filter Elements................1327
    Check Air Conditioning System Refrigerant Charge—If Equipped................1329
    Check Air Conditioning System Oil Charge—If Equipped................1330
    Inspect and Clean Cooling System................1331
    Lubricate Non-Powered Front Wheel Bearings—If Equipped................1334
    Check Windshield Washer Fluid Level—If Equipped................1335
  Section 3-4: Maintenance—Every 10 Hours or Daily................1336
    Check Engine Coolant Level................1337
    Check Hydraulic System Oil Level................1339
    Check Engine Oil Level................1340
    Lubricate Loader Pivots................1342
    Lubricate 3-Point Hitch Pivots................1344
    Lubricate Front Axle Pivot Pin................1345
    Lubricate Ripper Pivots................1346
    Lubricate Mechanical Front Wheel Drive (MFWD) Axle and Universal Joints—If Equipped................1347
    Lubricate Non-Powered Front Axle Steering Pivots—If Equipped................1348
    Lubricate Multipurpose Bucket Pivots—If Equipped................1349
    Lubricate Loader Quick Coupler—If Equipped................1350
  Section 3-5: Maintenance—Every 250 Hours................1351
    Take Engine Oil Sample................1352
    Check MFWD Axle Planetary Housing Oil Level—If Equipped................1353
    Check MFWD Axle Oil Housing Level—If Equipped................1354
    Check Rear Axle Oil Level................1355
    Check Transmission Oil Level................1356
    Lubricate MFWD Drive Shaft Spline—If Equipped................1357
    Drain and Refill Engine Oil and Replace Filter................1364
  Section 3-6: Maintenance—Every 500 Hours................1360
    Take Fluid Samples................1361
    Check Air Intake Hose................1362
    Drain Water and Sediment From Fuel Tank................1363
    Drain and Refill Engine Oil and Replace Filter................1364
    Replace Fuel Filters................1366
  Section 3-7: Maintenance—Every 1000 Hours................1368
    Check Coolant Condition................1369
    Clean, Pack, and Adjust Non-Powered Front Wheel Bearings—If Equipped................1370
    Drain and Refill Transmission Oil and Replace Filter................1372
    Replace Hydraulic Oil Filter................1374
    Replace Hydraulic Tank Breather................1375
    Inspect and Clean Fuel Tank Breather................1376
    Inspect Accessory Drive Belt................1377
  Section 3-8: Maintenance—Every 1500 Hours................1379
    Check and Adjust Engine Valve Lash................1380
  Section 3-9: Maintenance—Every 2000 Hours................1381
    Drain and Refill MFWD Axle Planetary Housing Oil—If Equipped................1382
    Drain and Refill MFWD Axle Housing Oil—If Equipped................1383
    Drain and Refill Rear Axle and Planetary Housing Oil................1384
    Inspect and Clean Hydraulic Tank Fill Screen................1386
    Drain and Refill Hydraulic Tank Oil................1387
  Section 3-10: Maintenance—Every 6000 Hours................1389
    Draining the Cooling System................1390
    Filling the Cooling System................1392
  Section 4-1: Miscellaneous—Machine................1394
    Clean Machine Regularly................1396
    Changing Loader Buckets................1530
    Checking Coolant Hoses and Radiator................1399
    Hydraulic Circuit Pressure Release................1401
    Checking Ride Control Accumulator—If Equipped................1403
    Checking Starting System................1405
    Discharge Ride Control System Hydraulic Pressure—If Equipped................1406
    Hitch Weight—If Equipped................1408
    Inspect Loader Boom Service Lock................1409
    Toe-In Check and Adjust................1410
    Steering Angle Check and Adjust................1412
    Adding Front Counterweights................1414
    Fuel System Bleed Procedure................1415
    Service Brake Bleed Procedure................1416
    Do Not Service Control Valves, Cylinders, Pumps, or Motors................1420
    Precautions for Alternator and Regulator................1421
    Handling, Checking, and Servicing Batteries Carefully................1422
    Using Battery Charger................1425
    Using Booster Batteries—12-Volt System................1427
    Removing Batteries................1428
    Replacing Batteries................1429
    Replacing Fuses................1430
    Welding on Machine................1437
    Keep Electronic Control Unit Connectors Clean................1438
    Check Park Brake................1439
    External Service Brake Inspection................1440
    Using Single Position Drawbar................1442
    Keep ROPS Installed Properly................1443
    JDLink™ Machine Monitoring System (MMS)—If Equipped................1444
    Remove and Install Halogen Bulbs................1445
    Hardware Torque Specifications................1447
    Unified Inch Bolt and Screw Torque Values................1448
    Metric Bolt and Screw Torque Values................1450
  Section 4-2: Miscellaneous—Operational Checkout................1452
    Operational Checkout Procedure................1453
  Section 4-3: Miscellaneous—Troubleshooting................1485
    Troubleshooting Procedure................1486
    Engine................1487
    Electrical System................1492
    Hydraulic System................1499
    Steering System................1502
    Power Train................1503
    MFWD................1505
    Rear Axle................1506
    Air Conditioning—If Equipped................1508
    Software Update................1509
  Section 4-4: Miscellaneous—Storage................1510
    Prepare Machine for Storage................1511
    Monthly Storage Procedure................1513
  Section 4-5: Miscellaneous—Machine Numbers................1515
    Record Product Identification Number (PIN)................1516
    Record Engine Serial Number................1517
    Record Transmission Serial Number................1518
    Record Rear Axle Housing Serial Number................1519
    Record Mechanical Front Wheel Drive (MFWD) Axle Housing Serial Number................1520
    Keep Proof of Ownership................1521
    Keep Machines Secure................1522
  Section 4-6: Miscellaneous—Specifications................1523
    Engine Specifications................1524
    Travel Speeds................1525
    Drain and Refill Capacities................1526
    Machine Dimensions................1527
    Machine Weights................1529
    Buckets................1530
    Machine Design Life................1531
    Eurasian Economic Union................1532

John Deere 210L / 210L EP Tractor Loader Operator's Manual (CXT13663 CXT25308 CXT15143)