Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1990-2015 Renault Trucks Kerax, Magnum, Magnum E-Tech, Mascott, Midlum, Premium (EURO III/IV/V/VI). Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 1990-2015 Renault Trucks Kerax, Magnum, Magnum E-Tech, Mascott, Midlum, Premium (EURO III/IV/V/VI) is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: Renault Trucks
MODEL: Kerax, Magnum, Magnum E-Tech, Mascott, Midlum, Premium (EURO III-IV-V-VI)
YEAR: 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
LANGUAGE: EN/FR/RU
FORMAT: PDF (Windows, Mac OS X, Linux, iPhone / iPad iOS, Android etc..)
PAGES / SIZE: 6.51 GB

EXCERPT:
Exhaust manifold
Removal / Fitting
Removal
Disconnect flexible oil pipe (2).
Remove oil return pipe (1).
Remove the exhaust manifold unit with the turbocharger.
Fitting
Install bolts (3) in locations.
Fit new gaskets (1).
Ensure the marking.
Fit exhaust manifold (2).
Tighten bolts (3) to torque.
See page(s) B-5-5.
For the rest of the fitting operations, proceed in the reverse sequence to removal.
Replace seals.
Tighten to torque.
See page(s) B-5-21.
To facilitate the assembly of this type of seal in its housing, mount it on the fitting tube and lubricate the outside with engine oil if it is a green or violet seal or with engine coolant if it is a black seal.
Steering pump
Removal / Fitting
Removal
Remove power-assisted steering pump (1).
Fitting
To fit, proceed in the reverse sequence to removal.
Replace O-ring with a new O-ring.
Tighten the bolts to torque. See page(s) B-5-23.
...