Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Buick Century 1982-2005. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Buick Century 1982-2005 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
2005 ENGINE Engine Mechanical - 3.1L - Century
Engine Mount Strut Bracket Replacement - Right
Removal Procedure
Fig. 34: Engine Mount Strut, Bracket & Bolts - Right
1. Remove the right engine mount strut from the right engine mount strut bracket. Refer to Engine Mount
Strut Replacement.
2. Remove the air conditioning compressor mounting bolts. Refer to Compressor Replacement (3.1L) in Heating Ventilation, and Air Conditioning.
3. Remove and set the air conditioning compressor aside.
Fig. 35: Locating Air Conditioning Compressor Mounting Bolts
4. Remove the bolts from the right engine mount strut bracket.
5. Remove the right engine mount strut bracket.
Fig. 36: Locating Air Conditioning Compressor Mounting Bolts
1. Position the right engine mount strut bracket over the pin locator.
2. Install the bolts through the right engine mount strut bracket to the cylinder head.
Tighten: Tighten the engine mount strut bracket bolt to 50 N.m (37 lb ft).
3. Install the air conditioner compressor. Refer to Compressor Replacement (3.1L) in Heating, Ventilation, and Air Conditioning.
Fig. 37: Engine Mount Strut, Bracket & Bolts - Right
4. Install the right engine mount strut to the right engine mount strut bracket. Refer to Engine Mount Strut Replacement.
Engine Mount Strut Bracket Replacement - Upper Radiator Support
Removal Procedure
Fig. 38: Engine Mount Strut
1. Remove the engine mount strut from the engine mount strut bracket at the upper radiator support. Refer to
Engine Mount Strut Bracket Replacement - Left and/or Engine Mount Strut Bracket Replacement - Right.
Fig. 39: Horizontal & Vertical Engine Mount Strut Bracket Bolts
2. Remove the horizontal engine mount strut bracket bolt from the engine mount strut bracket.
3. Remove the vertical engine mount strut bracket bolts from the engine mount strut bracket.
4. Remove the engine mount strut bracket from the upper radiator support.
Installation Procedure
Fig. 40: Horizontal & Vertical Engine Mount Strut Bracket Bolts
1. Position the engine mount strut bracket over the upper radiator support. Make sure that the engine mount strut bracket and the engine mount strut are aligned to the proper holes of the upper radiator support. The proper torque sequence is shown (1, 2).
2. Install and tighten the engine mount strut bracket bolts. The following is a mandatory torque sequence:
1. Tighten the horizontal engine mount strut bracket bolt (1) to the engine mount strut bracket.
Tighten: Tighten the horizontal engine mount strut bracket bolt to 26 N.m (19 lb ft).
2. Tighten the vertical engine mount strut bracket bolts (2) to the engine mount strut bracket.
...