Complete workshop & service manual with electrical wiring diagrams for Vauxhall/Opel Cavalier 1988-1995. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Vauxhall/Opel Cavalier 1988-1995 service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

EXCERPT:
Vacuum pull-down
Adjustment
8 With the air cleaner or air box removed from the top of the carburetor, as described in Section 17, paragraph 2, continue as follows. 9 Note the position of the bi-metal housing alignment marks as an aid to refitting, if necessary making additional marks for clarity, then remove the three securing screws, and lift off the bi-metal housing. Place the housing to one side, taking care not to strain the coolant hoses or electric choke heater wiring. 10 Position the fast idle speed adjustment screw on the highest step of the fast idle cam, and check that the choke valve is closed.
11 Move the pull-down arm towards the diaphragm unit by pushing on the adjustment screw until resistance is felt. Hold the arm in this position.
12 Using a drill shank of appropriate diameter, or a similar item, measure the clearance between the lower side of the choke plate and the wall of the primary barrel (see illustrations). Check that the clearance is as given for the “small” choke pull-down gap in the Specifications.
13 If adjustment is necessary, turn the adjustment screw in the appropriate direction, using an Allen key, until the clearance is correct.
…