Complete workshop & service manual with electrical wiring diagrams for Bobcat X56, X76 Excavator. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Bobcat X56, X76 Excavator service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

6570475 (1-87) - X 56,76 Excavator Service Manual.pdf

EXCERPT:
CONTENTS
10 ENGINE No. of Page
11 STRUCTURE AND FUNCTION . . . 11-1
13 DISASSEMBLY AND ASSEMBLY .. 13-1
20 POWER TRAIN
21 STRUCTURE AND FUNCTION .... 21-1
23 DISASSEMBLY AND ASSEMBLY .. 23-1
24 MAINTENANCE STANDARD ..... 24-1
30 UNDERCARRIAGE
31 STRUCTURE AND FUNCTION .... 31-1
34 MAINTENANCE STANDARD ..... 34-1
60 HYDRAULIC SYSTEM
61 STRUCTURE AND FUNCTION .... 61-1
62 TESTING AND ADJUSTING ...... 62-1
63 DISASSEMBLY AND ASSEMBLY .. 63-1
64 MAINTENANCE STANDARD ..... 64-1
70 WORK EQUIPMENT
71 STRUCTURE AND FUNCTION .... 71-1
74 MAINTENANCE STANDARD ..... 74-1
80 ELECTRICAL SYSTEM
81 STRUCTURE AND FUNCTION .... 81-1
…
INSTALLATION OF RADIATOR ASSEMBLY
56
1. Install radiator assembly (11 ).
2. Connect radiator inlet hose (9) and outlet hose (10).
3. Align cover (8) to the installation position and tighten with ten bolts (7).
4. Align canopy (6) to the installation position and tighten with bolts (5).
5. Align hood (2) to the installation position and tighten with bolts (4).
6. Install spring (3).
7. Tighten radiator drain plug (1 ), remove the cap.
Premix coolant before adding it to the system.
Use 50% anti-freeze and 50% water. This mixture will prevent freezing to approximately -34°F (-36°C), and also raises the boiling point and improves corrosion resistance.
Never exceed a 70/30 anti-freeze/water ratio.
Never add 100% anti-freeze to the system.
Never use supplemental coolant additives.
Use only anti-freeze containing less than 0.1% of silicate (measured as anhydrous alkali metasilicate).
Drain, flush, and refill system with correct premixed coolant whenever coolant becomes discolored.
Add coolant to specific level.
Replace the radiator cap.
* Run the engine to circulate the water through the cooling system. Then check the water level again.
…