Complete workshop repair service manual with electrical wiring diagrams for Mercedes-Benz SL-Class (R129) 300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600 Roadster. It's the same service manual used by dealers that guaranteed to be fully functional and intact without any missing page.

This Mercedes-Benz SL-Class (R129) 300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600 Roadster service & repair manual (including maintenance, overhaul, disassembling & assembling, adjustment, tune-up, operation, inspecting, diagnostic & troubleshooting…) is divided into different sections. Each section covers a specific component or system with detailed illustrations. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. The printer-ready PDF documents work like a charm on all kinds of devices.

Mercedes-Benz SL-Class (R129)
300SL, 300SL-24, SL280, SL320, 500SL, SL500, 600SL, SL600

R129 Workshop Service & Repair Manual (250 MB)
R129_SL-Class_Technical_Information.zip (517 MB)
bonus_materials.zip (157 MB)

EXCERPT:
TABLE OF CONTENTS (Exploded View)
00_Overall Vehicle
   00.00 - 000 588 03 90 00 Extractor link arm (ws00.00-p-0037b)
   00.00 - 000 588 04 90 00 Hose grommet (ws00.00-p-0035b)
   00.00 - 000 588 05 80 00 Pit lift (ws00.00-p-0248b)
   00.00 - 000 588 05 90 00 Clamping grommet (ws00.00-p-0036b)
   00.00 - 000 589 00 21 00 Test box (ws00.00-p-0034b)
   00.00 - 000 589 01 10 00 Torx bit set (ws00.00-n-0001z)
   00.00 - 000 589 01 40 00 Bracket (ws00.00-p-0244z)
   00.00 - 000 589 10 99 00 Tool kit (ws00.00-p-0030z)
   00.00 - 000 589 25 33 00 Internal extractor (ws00.00-n-0050z)
   00.00 - 000 589 28 33 00 Puller dia. 28-37 mm (ws00.00-n-3026z)
   00.00 - 000 589 29 33 00 Internal extractor (ws00.00-n-3027z)
   00.00 - 000 589 30 16 00 Hexagon ratchet, 10 mm (ws00.00-p-0002z)
   00.00 - 000 589 31 16 00 Hexagon ratchet, 13 mm (ws00.00-p-0003z)
   00.00 - 000 589 32 16 00 Hexagon ratchet, 17 mm (ws00.00-p-0004z)
   00.00 - 000 589 33 33 00 Counter stay (ws00.00-n-0051z)
   00.00 - 000 589 35 33 00 Countersupport (ws00.00-n-3033z)
   00.00 - 000 589 40 37 00 Clamp (ws00.00-n-0005z)
   00.00 - 000 589 40 37 00 Clamp (ws00.00-p-0005z)
   00.00 - 000 589 49 98 00 Oil sample container (ws00.00-p-0263b)
   00.00 - 000 589 54 37 00 Clamp (ws00.00-p-0006z)
   00.00 - 000 589 65 33 00 Puller (ws00.00-p-0007z)
   00.00 - 000 589 67 21 00 Torque wrench (ws00.00-p-0008z)
   00.00 - 000 589 68 33 00 Internal extractor (ws00.00-n-3030z)
   00.00 - 000 589 75 03 00 Box wrench bit (ws00.00-p-0009z)
   00.00 - 000 589 76 03 00 Box wrench (ws00.00-p-0010z)
   00.00 - 000 589 87 33 00 Gripper (ws00.00-n-3054z)
   00.00 - 000 589 89 33 00 Puller (ws00.00-n-3022z)
   00.00 - 001 589 00 16 00 Adapter coupling (ws00.00-p-0120z)
   00.00 - 001 589 03 91 00 Set of protective covers (ws00.00-p-3069b)
   00.00 - 001 589 51 21 00 Torque wrench (ws00.00-p-0012z)
   00.00 - 001 589 53 21 00 Dial gage (ws00.00-n-0013z)
   00.00 - 001 589 66 21 00 Torque wrench (ws00.00-n-0015z)
   00.00 - 001 589 67 21 00 Torque wrench (ws00.00-n-0016z)
   00.00 - 001 589 72 21 00 Torque wrench (ws00.00-p-0017z)
   00.00 - 001 589 73 21 00 Hand vacuum pump (ws00.00-p-0018z)
   00.00 - 001 589 74 21 00 Torque wrench (ws00.00-n-0019z)
   00.00 - 001 589 75 21 00 Torque wrench (ws00.00-n-3049b)
   00.00 - 001 589 76 09 00 External torx set (ws00.00-n-0020z)
   00.00 - 001 589 81 09 00 Set of flexible head wrenches (ws00.00-p-0251b)
   00.00 - 001 589 81 21 00 Torque screwdriver (ws00.00-n-0021z)
   00.00 - 001 589 87 21 00 Torque wrench (ws00.00-p-0119z)
   00.00 - 003 589 05 09 00 Torque tool set (ws00.00-n-0261a)
   00.00 - 003 589 06 09 00 Plug-in wrench (ws00.00-p-0262a)
   00.00 - 00 - Overview of test descriptions Diagnosis - Climate control Models 129, 140, 170, 202 ,210 (dh0000pk0up00x)
   00.00 - 00 - Overview of test descriptions Diagnosis - Gasoline engine Engines 102, 103, 104, 111, 116, 117, 119, 120 (dh0000pm0up00x)
   00.00 - 00 - Overview of test descriptions Diagnosis - Information_Communication Models 124, 129, 140, 170, 202, 210 (dh0000pi0up00x)
   00.00 - 00 - Preface Diagnosis Manual Models 124, 129, 140, 170, 201, 202, 210 (dh0000p00vt00x)
   00.00 - 00 - Summary of test descriptions Diagnosis - Body Models 124, 129, 140, 163, 168, 170, 202, 208, 210 (dh0000pa0up00x)
   00.00 - 00 - Survey of test descriptions Diagnosis Chassis Models 124, 129, 140, 170, 202, 210 (dh0000pf0up00x)
   00.00 - 00 - Use of Diagnosis Manual Diagnosis - Gasoline engine Engines 102, 103, 104, 111, 116, 117, 119, 120 (dh0000pm0an00x)
   00.00 - 00 - Use of the diagnosis manual Diagnosis; Chassis - Body - Climate control - Information_Communication Models 124, 129, 140, 170, 201, 202, 210 (dh0000p00an00x)
   00.00 - 100 589 02 59 00 Adapter (ws00.00-p-0022z)
   00.00 - 110 589 03 59 00 Mounting wedge (ws00.00-p-0274k)
   00.00 - 112 589 00 25 00 Squeeze gun (ws00.00-p-0052z)
   00.00 - 116 589 02 07 00 Screwdriver, 5 mm (ws00.00-n-0023z)
   00.00 - 116 589 03 07 00 T-handle Allen wrench (ws00.00-p-0024z)
   00.00 - 117 589 02 07 00 Pin box wrench (ws00.00-p-0054z)
   00.00 - 123 589 00 16 00 Extension (ws00.00-p-0025z)
   00.00 - 123 589 02 09 00 Socket (ws00.00-p-0026z)
   00.00 - 123 589 02 10 00 Allen wrench socket (ws00.00-p-0027z)
   00.00 - 123 589 03 09 00 Socket (ws00.00-p-0028z)
   00.00 - 163 589 03 43 00 Press (ws00.00-p-0057z)
   00.00 - 198 589 00 09 00 Flexible head wrench socket (ws00.00-p-0032z)
   00.00 - 210 589 00 71 00 Hand pump (ws00.00-p-0280z)
   00.00 - 220 589 05 99 00 Electrical connection kit (ws00.00-p-0279z)
   00.00 - 363 589 02 21 00 Dial indicator holder (ws00.00-p-0033z)
   00.00 - Collection and disposal of components containing mercury (os00.00-p-1000zz)
   00.00 - Connecting and using test equipment (ad00.00-p-1000az)
   00.00 - Forms Passenger cars Overall vehicle - - of00.00-z-3999az)
   00.00 - Scrapping gas-filled hydraulic components (os00.00-p-2000zz)
   00.00 - Service Information Exclusion of liability for third-party retrofits (si00.00-p-0025a)
   00.00 - Service Information Identification of fine dust badge for vehicles not registered in Germany (si00.00-p-0082a)
   00.00 - Service information Important notes on the use of various vehicle systems and components (si00.00-p-0500a)
   00.00 - Service information New damage code (si00.00-z-0038a)
   00.00 - Service information New update concept for diagnosis applications (si00.00-z-0004a)
   00.00 - Service Information Operation items for test drives (si00.00-p-0009a)
   00.00 - Service Information Processing of warranty and goodwill claims (si00.00-p-0116a)
   00.00 - Service Information QR code for rescue forces (si00.00-p-0089a)
   00.00 - Sheet of drawings on paint damage Passenger cars, Model des. 129, 140, 202, 210 (wb6516lit7423z)
   00.00 - Tightening torques Passenger cars Overall vehicle (ba00.00-z-9999az)
   00.01 - Certificates (of00.01-z-1999zz)
   00.01 - Forms (of00.01-z-3999zz)
   00.01 - Function group overview, engine (ov00.01-z-1904a)
   00.01 - Function group survey, body (ov00.01-z-1906a)
   00.01 - Information for the user (ov00.01-z-0100zz)
   00.01 - Introduction of WIS Service Media (sn00.01-z-0012a)
   00.01 - Overall vehicle model and major assembly installation overview (ov00.01-z-0150az)
   00.01 - Overview of function groups, chassis (ov00.01-z-1905a)
   00.01 - Search aid for electrical components (ov00.01-z-1800a)
   00.01 - Service Information Content and application of data mediums Telematics CD_DVD, Regio DVD and Digital Owner342200230s Manual DVD (si00.01-p-0014a)
   00.01 - Service Information Damage or breakdown case in international traffic (si00.01-z-0031a)
   00.01 - Service Information Invoicing of quick test (si00.01-p-0006a)
   00.01 - Service Information Modification of battery maintenance (si00.01-p-0013a)
   00.01 - Service Information SDconnect rechargeable battery (si00.01-p-0003a)
   00.01 - Service Information Structure of the new operation numbers for SmallRepair in ASRA [operation texts, standard texts, flat rates and work units] (si00.01-z-0001a)
   00.01 - Service Information Synonym search - New functionality in WIS (si00.01-z-0036a)
   00.01 - Service Information Trouble diagnosis bulletins (AF) publication type not applicable (si00.01-z-0029a)
   00.01 - Service Information WIS Service Media (si00.01-z-0012a)
   00.01 - Service-Information Xentry Support & Feedback in WIS net (si00.01-z-0030a)
   00.01 - Summaries (ov00.01-z-0102zz)
   00.01 - Survey of function groups - overall vehicle (ov00.01-z-1903a)
   00.01 - Terminology (ov00.01-z-0104zz)
   00.10 - Check gear capacity (ar00.10-p-1010a)
   00.10 - Complete vehicle, model_component installation survey, build condition (gf00.10-p-0801b)
   00.10 - Contents retrofitting and converting special equipment (an00.10-p-1000dz)
   00.10 - Service information on increase of engine performance (si00.10-p-0004a)
   00.10 - Service Information Vehicle identification plate orders (si00.10-p-0003b)
   00.10 - Table of contents for subsequent installation and conversion of accessories (az00.10-p-1000mz)
   00.19 - 000 589 13 99 00 Wiring harness repair kit, basic (ws00.19-p-0007b)
   00.19 - 220 589 01 99 00 Wiring harness repair kit (ws00.19-p-0009b)
   00.19 - 220 589 02 99 00 Wiring harness repair kit (ws00.19-p-0002b)
   00.19 - 220 589 03 99 00 Positioning mount with quick-release fitting (ws00.19-p-0003b)
   00.19 - 220 589 04 99 00 Wiring harness repair kit, supplement (ws00.19-p-0006b)
   00.19 - 930 589 00 99 00 Wiring harness repair kit, supplement (ws00.19-n-0004b)
   00.19 - General repair methods for wiring harness (ar00.19-p-0100a)
   00.19 - Performing basic programming (ar00.19-p-0200a)
   00.19 - Removing contacts from plugs and connectors (ar00.19-p-0120a)
   00.19 - Repair wiring harness as per specified repair method (ar00.19-p-0001a)
   00.20 - 0006 - Overview, model, work sheet, order no. Models 107 from 8_85, 124_129_140 to 6_93, 126 from 9_85, 201 from 1_85, 123 (wh0000pkwvt06x)
   00.20 - 0053 - Visual inspection for missing components, leakage assemblies, chafing points, line position Models; 107 from 08_85, 124, 126 from 09_85, 129, 140, 201 from 01_85 (wh0053pkw0000x)
   00.20 - 0090 - Checking chassis and supporting body components for damage and corrosion Models 107 from 8_85, 124, 129, 140 to 6_93, 126 from 9_85, 201 from 1_85, 123 (wh0090pkw0000x)
   00.20 - 1st care service 10000 - 12500 km, additional between the maintenance services every 10000 km_annually (ap00.20-p-1220a)
   00.20 - Active service system (ASSYST) function description contents (gf00.20-p-0997az)
   00.20 - Check all visible parts for leaks and damage (ap00.20-p-0053ba)
   00.20 - Inspect chassis and load-bearing body parts for damage and corrosion (ap00.20-p-0090ba)
   00.20 - Inspection 1,000 - 5,000km_600 - 3,000 miles Models 124 up to 06_93; 129 up to 06_93; 140 up to 06_93; 201 (by Model 201.03 inspection at 1,000 - 1,500km_600 - 900 miles) (wb981cpkw0069z)
   00.20 - Inspection service every 15000 km_annually (ap00.20-p-0013a)
   00.20 - Maintenance (ap00.20-p-0000a)
   00.20 - Maintenance (ap00.20-p-0000c)
   00.20 - Maintenance (ap00.20-p-0000d)
   00.20 - Maintenance service Every 20,000 km _12,000 miles _ 2 years Models 107 from 08_85, 124, 129, 140 to 06_93, 126 from 09_85, 201 from 01_85 (wb980epkw0070z)
   00.20 - Maintenance service every 20 000 km_2 years (ap00.20-p-0005b)
   00.20 - Maintenance service every 30 000 km_2 years (ap00.20-p-0014a)
   00.20 - Service Information Filling of AdBlue during service (si00.20-p-0004a)
   00.20 - Service Information Forms for delivery and hand-over inspections, inspections and checks in information type AP (si00.20-p-0044a)
   00.20 - SERVICE SHEET for Active Service System (ASSYST) (ap00.20-p-0001d)
   00.40 - Directory of additional operating fluids (bb00.40-p-0300zz)
   00.40 - General list (bb00.40-p-0000zz)
   00.40 - List of fuels (bb00.40-p-0100zz)
   00.40 - List of lubricants (bb00.40-p-0200zz)
   00.40 - Search aid for Specifications for Operating Fluids (bb00.40-p-0900a)
   00.40 - Service Information bulletin Specifications for Operating Fluids for automatic transmission (si00.40-p-0014a)
   00.40 - Service information Dying of windshield washer fluid concentrate (si00.40-z-0006a)
   00.40 - Service Information Exclusive use of Mercedes-Benz lubricants in warranty and goodwill cases (si00.40-p-0009a)
   00.40 - Service information on specifications for service products (si00.40-p-0004b)
   00.40 - Service information on specifications for service products (si00.40-p-0004c)
   00.45 - Auxiliary repair materials (br00.45-z-0999zz)
   00.45 - Service Information Multipurpose metal grease (si00.45-p-0004a)
   00.45 - Service Information Service kit for rectifying squeaking, creaking and tearing noises (si00.45-p-0002a)
01_Complete Engine, Crankcase Ventilation, Cylinder Head, Crankcase
   01.00 - 000 588 00 31 00 Assembly stand (ws01.00-n-3028b)
   01.00 - 000 588 00 62 00 Load tilter (ws01.00-p-0102b)
   01.00 - 000 588 01 21 00 Endoscope (ws01.00-p-0097b)
   01.00 - 000 588 03 62 00 Lifting platform (ws01.00-p-0091a)
   01.00 - 000 588 04 62 00 Removal fixture (ws01.00-n-3014b)
   01.00 - 000 588 09 62 00 Engine support fixture (ws01.00-p-0094b)
   01.00 - 000 588 11 62 00 Major assembly mount (ws01.00-p-0092b)
   01.00 - 000 589 01 25 00 Hand pressure gun (ws01.00-n-3060b)
   01.00 - 0010 - Engine and model survey Engine 119.96 KE, 119.97 LH 119.98 ME (ra01001190010x)
   01.00 - 001 589 00 91 00 Set of protective covers (ws01.00-n-0110b)
   01.00 - 001 589 01 91 00 Set of protective covers (ws01.00-p-0111b)
   01.00 - 001 589 02 91 00 Set of protective covers (ws01.00-n-0112b)
   01.00 - 001 589 76 21 00 Compression tester (ws01.00-p-0004a)
   01.00 - 001 589 77 21 00 Compression recorder (ws01.00-p-0005a)
   01.00 - 003 589 03 37 00 Hose clamp pliers (ws01.00-p-0113b)
   01.00 - 0080 - Hazard warnings when the hood is opened Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190080x)
   01.00 - 102 589 00 99 00 HELI-COIL repair set (ws01.00-n-0009c)
   01.00 - 111 589 00 91 00 Connector (ws01.00-n-0018b)
   01.00 - 111 589 12 31 00 Support (ws01.00-p-0021c)
   01.00 - 117 589 00 98 00 Cover sleeves (ws01.00-p-0023c)
   01.00 - 119 589 00 10 00 Socket (ws01.00-p-0026b)
   01.00 - 119 589 00 14 00 Sleeves (ws01.00-p-0027c)
   01.00 - 119 589 01 40 00 Retaining bracket (ws01.00-p-0029c)
   01.00 - 119 589 04 15 00 Drift punch (ws01.00-p-0051c)
   01.00 - 452 589 01 99 00 Repair tools for valves (ws01.00-p-0108c)
   01.00 - 601 589 00 10 00 Screwdriver bit (ws01.00-p-0033b)
   01.00 - 617 589 00 10 00 Screwdriver bit (ws01.00-n-0046b)
   01.00 - Cleaning and preserving engine and engine compartment (ap01.00-p-1000zz)
   01.00 - Forms Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase - - of01.00-z-3999az)
   01.00 - Technical modifications Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase (bt01.00-z-9999az)
   01.00 - Test and adjustment values Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase - - be01.00-z-9999az)
   01.00 - Tightening torques Passenger cars Complete engine, crankcase ventilation, cylinder head , crankcase - - ba01.00-z-9999az)
   01.10 - 0100 - Testing the compression pressure Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190100x)
   01.10 - 0101 - Engine oil and filter change Models; 107 from 8_85, 124, 129, 140 to 6_93, 126 from 9_85, 201 from 1_85, 123 All engines (wh0101pkw0000x)
   01.10 - 0150 - Testing cylinders for leaks Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190150x)
   01.10 - 0200 - Inspecting cylinders with light probe, assessing cylinders Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190200x)
   01.10 - 0300 - A. Removing and installing engine Models 124, 129, 140 Engines 119.96 119.97, and 119.98 (ra0100119a300x)
   01.10 - 0400 - Function description of the crankcase ventilation Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190400x)
   01.10 - 2130 - Removal and installation of the driver on camshaft Engine 119 (ra01001192130x)
   01.10 - 2240 - Checking rear of engine for leaks, with engine running Engine 119 Transmission 722.3 (ra01001192240x)
   01.10 - 4070 - Repair of the spark plug threads Engine 119 (ra01001194070x)
   01.10 - Service Information Cleaning sealing surfaces (si01.10-p-0004a)
   01.10 - Technical modifications Engine Removal_installation of engine, crankcase, cylinder head, crankcase ventilation Engine 119 (ra0100119ta00x)
   01.20 - 0500 - Removal and installation of the cylinder head covers Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001190500x)
   01.20 - 1000 - Notes on crankcase Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191000x)
   01.30 - 4000 - Notes on cylinder heads Engines 119.970_971_972_974_975 (ra01001194000x)
   01.30 - 4150 - Removal and installation of the cylinder head A. Models 124, 140, 210, B. Model 129 Engine 119.960 (ra01001194150x)
   01.30 - 4180 - Checking the cylinder head mating surface, facing Engine 119 (ra01001194180x)
   01.40 - 1100 - Installing cylinder liners Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191100x)
   01.40 - 1120 - Measuring, honing, and silicon lapping cylinder bores Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191120x)
   01.40 - 1200 - Facing crankcase mating surface Engine 119.96 KE, 119.97 LH, 119.98 ME (ra01001191200x)
   01.40 - 2100 - Removal and installation of the timing case cover A. Engine 119.960 KE, B. Engine 119.97_98 LH_ME (ra01001192100x)
   01.40 - 2120 - Removal and installation of the front covers at the top A. Eng. 119.960 in Model 129, B. Eng. 119.97, C. Eng. 119.98 in Model 210 (ra01001192120x)
   01.40 - 2140 - Replacement of radial shaft seals in front covers at the top Engine 119.96_97 with front cover installed and removed (ra01001192140x)
   01.40 - 2220 - Removal and installation of the end cover Engine 119 (ra01001192220x)
   01.40 - Service Information on assessing cylinder contact surfaces (si01.40-p-0001a)
03_Crank Assembly
   03.00 - 000 589 04 14 00 Tensioning strap (ws03.00-p-0001c)
   03.00 - 000 589 20 21 00 Hardness tester (ws03.00-p-0002c)
   03.00 - 000 589 51 37 00 Pliers (ws03.00-p-0005c)
   03.00 - 001 589 65 09 00 Socket wrench bit (ws03.00-p-0006b)
   03.00 - 103 589 00 33 00 Puller (ws03.00-p-0013b)
   03.00 - 116 589 01 40 00 Retaining lock (ws03.00-p-0017c)
   03.00 - 116 589 17 21 00 Gauge pin (ws03.00-p-0019c)
   03.00 - 117 589 00 43 00 Installation tool (ws03.00-p-0020b)
   03.00 - 119 589 00 21 00 Locating tool (ws03.00-p-0021c)
   03.00 - 119 589 01 14 00 Sleeve (ws03.00-p-0022b)
   03.00 - 3450 - Checking and correcting the setting of the TDC sensor Engine 119 (ra03001193450x)
   03.00 - 5000 - Removal and installation of the crankshaft_ring gear retaining lock A. Transmission installed, B. Transmission removed Engine 119 (ra03001195000x)
   03.00 - 615 589 01 33 00 Puller (ws03.00-p-0030c)
   03.00 - 617 589 00 16 00 Square drive (ws03.00-p-0032b)
   03.00 - Technical modifications Crank assembly Engine 119 (ra0300119ta00x)
   03.00 - Technical modifications Passenger cars Crank assembly (bt03.00-z-9999az)
   03.00 - Test and adjustment values Passenger cars Crank assembly (be03.00-z-9999az)
   03.00 - Tightening torques Passenger cars Crank assembly - - ba03.00-z-9999az)
   03.10 - 3100 - Checking, replacing and tightening conrad bolts Engine 119 (ra03001193100x)
   03.10 - 3130 - Repair and alignment of the conrod Engine 119 (ra03001193130x)
   03.10 - 3160 - Removal and installation of pistons Engine 119 (ra03001193160x)
   03.10 - 3165 - Pistons, matching and dimensions Engine 119 (ra03001193165x)
   03.10 - 3170 - Replacement of piston rings Engine 119 (ra03001193170x)
   03.20 - 3200 - Mounting crankshaft in bearings A. Engine 119.96_97 with fit bearing Engines 119.96, 119.97, 119.98 (ra030a1193200x)
   03.20 - 3200 - Mounting crankshaft in bearings B. Engine 119.97_98 with thrust washers Engines 119.96, 119.97, 119.98 (ra030b1193200x)
   03.20 - 3240 - Replacement of the crankshaft front radial seal Engine 119 (ra03001193240x)
   03.20 - 3270 - Replacement of the crankshaft rear radial seal Engine 119 (ra03001193270x)
   03.30 - 3420 - Removal and installation of vibration damper_hub belt pulley A. Engine 119.960 (119.97 up to 08_94) B. Engine 119.97_98 from 08_94 (ra03001193420x)
   03.30 - 4100 - Removal and installation of the driven plates A. Engine 119.960_97, B. Engine 119.98 (ra03001194100x)
   03.30 - 4300 - Replacement of the ring gear Engine 119 (ra03001194300x)
   03.30 - 4350 - Adjusting clearance of ring gear to starter Engine 119 (ra03001194350x)
05_Engine Timing
   05.00 - 000 589 10 53 00 Reamer (ws05.00-n-0001c)
   05.00 - 000 589 10 68 00 Cylinder brush (ws05.00-p-0002c)
   05.00 - 000 589 21 53 00 Reamer (ws05.00-n-0005c)
   05.00 - 000 589 58 43 00 Installation tool (ws05.00-n-0006c)
   05.00 - 102 589 00 23 00 Drift (ws05.00-n-0008c)
   05.00 - 102 589 00 34 00 Threaded bolt (ws05.00-p-0009b)
   05.00 - 102 589 01 23 00 Feeler gauge (ws05.00-p-0012c)
   05.00 - 102 589 01 53 00 Reamer (ws05.00-p-0013c)
   05.00 - 102 589 03 40 00 Magnet (ws05.00-n-0023a)
   05.00 - 103 589 02 15 00 Staged drift (ws05.00-n-0042c)
   05.00 - 103 589 03 15 00 Staged drift (ws05.00-n-0043c)
   05.00 - 104 589 00 15 00 Drift punch (ws05.00-p-0044c)
   05.00 - 104 589 00 23 00 Plug gauge (ws05.00-p-0045c)
   05.00 - 104 589 00 53 00 Reamer (ws05.00-p-0046c)
   05.00 - 104 589 01 15 00 Drift punch (ws05.00-p-0048c)
   05.00 - 104 589 01 43 00 Drift (ws05.00-n-0049b)
   05.00 - 104 589 01 53 00 Broach (ws05.00-p-0050c)
   05.00 - 104 589 01 63 00 Guide sleeve (ws05.00-p-0051c)
   05.00 - 111 589 01 40 00 Thrust nut (ws05.00-p-0068c)
   05.00 - 111 589 02 15 00 Drift (ws05.00-p-0070c)
   05.00 - 111 589 02 59 00 Assembly board (ws05.00-n-0071c)
   05.00 - 111 589 03 15 00 Retaining pins (ws05.00-n-0072b)
   05.00 - 111 589 18 61 00 Lever pusher (ws05.00-n-0073b)
   05.00 - 111 589 25 61 00 Valve assembly tools kit (ws05.00-p-3137ba)
   05.00 - 112 589 09 63 00 Assembly inserts (ws05.00-p-0165c)
   05.00 - 116 589 01 34 00 Threaded bolt (ws05.00-n-0083b)
   05.00 - 116 589 02 34 00 Threaded bolt (ws05.00-n-0086b)
   05.00 - 116 589 06 63 00 Magnetic rod (ws05.00-p-0088b)
   05.00 - 116 589 20 33 00 Impact extractor (ws05.00-n-0089b)
   05.00 - 117 589 03 23 00 Drift (ws05.00-n-0093c)
   05.00 - 119 589 00 01 00 Double open end wrench (ws05.00-p-0097b)
   05.00 - 119 589 00 43 00 Drift (ws05.00-n-0098b)
   05.00 - 119 589 00 53 00 Reamer (ws05.00-p-0151c)
   05.00 - 119 589 01 53 00 Broaching tool (ws05.00-p-0152c)
   05.00 - 119 589 01 63 00 Clip remover (ws05.00-p-0099b)
   05.00 - 119 589 02 15 00 Drift punch (ws05.00-p-0100c)
   05.00 - 119 589 05 63 00 Guide sleeve (ws05.00-p-0153c)
   05.00 - 119 589 06 63 00 Thrust piece (ws05.00-p-0101b)
   05.00 - 210 589 00 40 00 Magnetic pin (ws05.00-n-0155b)
   05.00 - 2110 - Examining and replacing hydraulic valve clearance compensating elements (bucket tappets) Engine 119 (ra05001192110x)
   05.00 - 271 589 00 59 00 Assembly tool (ws05.00-p-0202c)
   05.00 - 602 589 00 39 00 Riveting tool (ws05.00-p-0162c)
   05.00 - 602 589 00 98 00 Case (ws05.00-p-0158c)
   05.00 - 602 589 02 33 00 Chain separating tool (ws05.00-p-0159c)
   05.00 - 602 589 02 40 00 Assembly links (ws05.00-p-0171c)
   05.00 - 602 589 05 63 00 Pressure screw (ws05.00-p-0161c)
   05.00 - 605 589 00 33 00 Puller (ws05.00-p-0154b)
   05.00 - 606 589 00 37 00 Pliers (ws05.00-p-0116b)
   05.00 - 606 589 02 15 00 Drift punch (ws05.00-p-0167c)
   05.00 - 642 589 00 33 00 Riveting tool (ws05.00-p-0260c)
   05.00 - Technical modifications Passenger cars Engine timing (bt05.00-z-9999az)
   05.00 - Test and adjustment values Passenger cars Engine timing (be05.00-z-9999az)
   05.00 - Tightening torques Passenger cars Engine timing - - ba05.00-z-9999az)
   05.10 - 3100 - Removal and installation of the chain tensioner Engine 119 (ra05001193100x)
   05.10 - 3200 - Replacement of and riveting the timing chain Engine 119 (ra05001193200x)
   05.10 - 3300 - Removal and installation of the tensioning rail Engine 119 (ra05001193300x)
   05.10 - 3330 - Removing and Installing slide rails (arrangement) A. Engine 119.96, B. Engine 119.97 (ra05001193330x)
   05.10 - 3350 - Removal and installation of guide rails at top of cylinder head Engine 119 (ra05001193350x)
   05.10 - 3400 - Removal and installation of guide rail in crankcase Engine 119.97 (ra05001193400x)
   05.20 - 2150 - Checking the camshaft timing Engine 119 (ra05001192150x)
   05.20 - 2170 - Removal and installation of the camshaft adjuster Engine 119 (ra05001192170x)
   05.20 - 2175 - Armature and solenoid at camshaft adjuster Engine 119 (ra05001192175x)
   05.20 - 2190 - Matching the parts of the camshaft adjusters Engine 119 (ra05001192190x)
   05.20 - 2200 - Removal and installation of the camshafts Engine 119 (ra05001192200x)
   05.20 - 2230 - Checking and adjustment of the camshaft basic setting Engine 119 (ra05001192230x)
   05.30 - 2500 - Removal and installation of the valve springs A. Models 124, 129, 140 B. Model 210A. Models 124, 129, 140 B. Model 210 Engine 119 (ra05001192500x)
   05.30 - 2550 - Removing and installing valves Engine 119 (ra05001192550x)
   05.30 - 2600 - Inspecting valve springs Engine 119 (ra05001192600x)
   05.30 - 2700 - Replacement of the valve stem seals Engine 119 (ra05001192700x)
   05.30 - 2800 - Inspecting and machining valves Engine 119 (ra05001192800x)
   05.30 - 2845 - Checking the valve guides Engine 119 (ra05001192845x)
   05.30 - 2850 - Replacement of the valve guides Engine 119 (ra05001192850x)
   05.30 - 2900 - Replacing valve seat rings Engine 119 (ra05001192900x)
   05.30 - 2910 - Machining valve seat rings Engine 119 (ra05001192910x)
   05.30 - Technical modifications Engine timing, valves Engine 119 (ra0500119ta00x)
07_Mixture Formation
   07.00 - 000 589 00 68 00 Cleaning kit (ws07.00-p-0001c)
   07.00 - 000 589 68 03 00 Box wrench bit (ws07.00-n-0004a)
   07.00 - 000 589 68 03 00 Box wrench bit (ws07.00-p-0004b)
   07.00 - 000 589 69 03 00 Ring wrench bit (ws07.00-p-0088b)
   07.00 - 103 589 00 21 00 Testing unit (ws07.00-n-0014b)
   07.00 - 103 589 02 63 00 Adapter (ws07.00-p-0017b)
   07.00 - 104 589 00 63 00 Test cable (ws07.00-p-0018b)
   07.00 - 117 589 04 07 00 Slotted nut wrench (ws07.00-p-0023c)
   07.00 - 119 589 04 63 00 Pressure hose (ws07.00-p-0024b)
   07.00 - 123 589 00 15 00 Drift punch (ws07.00-p-0026b)
   07.00 - 123 589 05 33 00 Puller (ws07.00-p-0027b)
   07.00 - 124 589 01 37 00 Lead-sealing pliers (ws07.00-p-0028b)
   07.00 - 124 589 19 21 00 Pulse counter (ws07.00-p-0029b)
   07.00 - 124 589 24 63 00 Stamping set (ws07.00-p-0030b)
   07.00 - 124 589 43 63 00 22-pin test cable (ws07.00-p-0033b)
   07.00 - 126 589 11 63 00 Emission probe (ws07.00-p-0036b)
   07.00 - 140 589 01 33 00 Mounting lever (ws07.00-p-0037a)
   07.00 - 140 589 09 21 00 Simulator (ws07.00-p-0040b)
   07.00 - 140 589 10 21 00 Simulator (ws07.00-p-0041b)
   07.00 - A - Test and adjustment Data 00 - Test values with ignition ON and starting speed All Engines (dh0a00pm00000x)
   07.00 - B3 - Test and Adjustment Operations 51 - Testing engine output and exhaust emissions All Engines (dh0b03pm00051x)
   07.00 - C - Diagnosis test equipment 60 - Diagnosis test All engines (dh0c00pm00060x)
   07.00 - C - Diagnostic Testers 11 - General All Engines (dh0c00pm10011x)
   07.00 - C - Diagnostic Testers 12 - Fault Analysis All Engines (dh0c00pm10012z)
   07.00 - C - Diagnostic Testers 13 - Test procedure engine not running All Engines (dh0c00pm10013z)
   07.00 - C - Diagnostic Testers 14 - Test procedure engine running All Engines (dh0c00pm10014z)
   07.00 - C - Diagnostic Testers 21 - Fault code with diagnostic testers All Engines (dh0c00pm10021x)
   07.00 - C - Diagnostic Testers 31 - Connection diagram All Engines (dh0c00pm10031x)
   07.00 - C - Diagnostic Testers 33 - Connection diagram two-circuit ignition system Engines 119 KE_LH (dh0c00pm10033x)
   07.00 - C - Diagnostic testers 41 - Diagnostic test - Overview All Engines (dh0c00pm10041x)
   07.00 - C - Diagnostic Testers 42 - Diagnostic Test - Start Test All Engines (dh0c00pm10042x)
   07.00 - C - Diagnostic Testers 45 - Diagnostic Test - Engine setting All Engines (dh0c00pm10045x)
   07.00 - C - Diagnostic Testers 48 - Diagnostic test All Engines (dh0c00pm00048x)
   07.00 - C - Diagnostic Testers 49 - Diagnostic test - Engine output test All Engines (dh0c00pm10049x)
   07.00 - C - Diagnostic Testers 50 - Diagnostic test - Special signals All Engines (dh0c00pm10050x)
   07.00 - C - Diagnostic testing devices 35 - Connection diagram, zero signal high voltage distribution All Engines (dh0c00pm00035x)
   07.00 - Certificates Passenger cars Mixture formation (of07.00-z-1999az)
   07.00 - D - Diagnosis Paths 11_1 - Complaint - Starting behavior_Starting time All Engines (dh0d00pm11101x)
   07.00 - D - Diagnosis Paths 11_2 - Complaint - Idling not smooth, surging_misfiring All Engines (dh0d00pm11102x)
   07.00 - D - Diagnosis Paths 11_3 - Complaint - Poor throttle response_Transition fault All Engines (dh0d00pm11103x)
   07.00 - D - Diagnosis Paths 11_4 - Complaint - Poor output_Fuel consumption All Engines (dh0d00pm11104x)
   07.00 - Exhaust emission test I (ar07.00-p-1000a)
   07.00 - Forms Passenger cars Mixture formation (of07.00-z-3999az)
   07.00 - Service Information on fuel consumption measurement (si07.00-p-0004a)
   07.00 - Technical modifications Passenger cars Mixture formation (bt07.00-z-9999az)
   07.00 - Test and adjustment values Passenger cars Mixture formation (be07.00-z-9999az)
   07.00 - Tightening torques Passenger cars Mixture formation - - ba07.00-z-9999az)
   07.03 - Removing and installing fuel rail with injection valves (LH-SFI) (ar07.03-p-1452e)
   07.03 - Removing and installing injection valves (LH-SFI) (ar07.03-p-6521e)
   07.03 - Removing and installing insulation sleeves or rubber rings (for injection valves) (LH-SFI) (ar07.03-p-6570e)
   07.17 - Removing and installing diaphragm pressure regulator (LH-SFI) (ar07.17-p-1451e)
   07.32 - 0750 - Checking and adjustment of the idle speed, emission value_lambda control Engines 104, 119, 120 LH-injection (except USA) Models 124, 129, 140 to 6_93 (wh0750pkw0040z)
   07.32 - B1 - Test and Adjustment Operations 11 - Testing, adjusting engine Engine 104, 119 KE (dh0b01pm10011x)
   07.32 - B2 - Test and Adjustment Operations 31 - Testing, adjusting idle speed Engine 104, 119 KE (dh0b02pm10031x)
   07.41 - 0004 - Function desciption Vehicle features LH - Injection System (ra0704flh0004x)
   07.41 - 0010 - Function desciption Function diagram A. Engine 104, B. Engine 119, C. Engine 120 LH - Injection System (ra0704flh0010x)
   07.41 - 0015 - Function desciption Location of components A. Engine 104, B. Engine 119, C. Engine 120 LH - Injection System (ra0704flh0015x)
   07.41 - 3.1 - Gasoline Injection System (LH) 11 - Diagnosis - Fault memory Engines 104, 119 (dh0301pm20011x)
   07.41 - 3.1 - Gasoline Injection System (LH) 12 - Diagnosis - Troubleshooting table Engines 104, 119 (dh0301pm20012x)
   07.41 - 3.1 - Gasoline Injection System (LH) 21 - Test program - Electrics, Location of components Engines 104, 119 (dh0301pm20021x)
   07.41 - 3.1 - Gasoline Injection System (LH) 22 - Test program - Electrics, Preconditions for test Engines 104, 119 (dh0301pm20022x)
   07.41 - 3.1 - Gasoline Injection System (LH) 23 - Test program - Electrics, Test Engines 104, 119 (dh0301pm20023x)
   07.41 - 3.1 - Gasoline Injection System (LH) 31 - Test program - Hydraulics, Testing fuel pressures and for internal leaks Engines 104, 119 (dh0301pm20031x)
   07.41 - 3.1 - Gasoline Injection System (LH) 32 - Test program - Hydraulics, Testing fuel pressures and for internal leaks Engines 104, 119 (dh0301pm20032x)
   07.41 - 3.1 - Gasoline Injection System (LH) 33 - Test program - Hydraulics, Testing fuel pumps Engines 104, 119 (dh0301pm20033x)
   07.41 - 3.1 - Gasoline Injection System (LH) 34 - Test program - Hydraulics, Testing the fuel pumps Engines 104, 119 (dh0301pm20034x)
   07.41 - 3.1 - Gasoline Injection System (LH) 35 - Test program - Hydraulics, Testing the fuel injection valves Engines 104, 119 (dh0301pm20035x)
   07.41 - 3.1 - Gasoline Injection System (LH) 36 - Test program - Hydraulics, Testing the fuel injection valves Engines 104, 119 (dh0301pm20036x)
   07.41 - 3.1 - Gasoline Injection System (LH) 41 - Test program - Hydraulics, Performing cold start Engines 104, 119 (dh0301pm20041x)
   07.41 - 3.1 - Gasoline Injection System (LH) 42 - Test program - Hydraulics, Performing a cold start Engines 104, 119 (dh0301pm20042x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 11 - Diagnosis - Fault memory Engines 104, 119 LH (dh0502pm20011x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 12 - Diagnosis - Troubleshooting table Engines 104, 119 LH (dh0502pm20012x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 21 - Test program - Electrics, Location of components Engines 104, 119 LH (dh0502pm20021x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 22 - Test program - Electrics, Preconditions for test Engines 104, 119 LH (dh0502pm20022x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 23 - Test program - Electrics, Test (engine not running) Engines 104, 119 LH (dh0502pm20023x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 24 - Test program - Electrics, Test (engine running) Engines 104, 119 LH (dh0502pm20024x)
   07.41 - 5.2 - Electronic Ignition System (EZL) 25 - Test program - Electrics, Figures Engines 104, 119 LH (dh0502pm20025x)
   07.41 - A - Test and adjustment Data 32 - Engines 119.970_971 from 01_91, 119.972 from 09_92, 119.974 from 01_92 and 119.975 from 10_92 (dh0a00pm00032x)
   07.41 - B1 - Test and Adjustment Operations 21 - Testing, adjusting engine Engine 104, 119, 120 LH (dh0b01pm10021x)
   07.41 - B2 - Test and Adjustment Operations 41 - Testing, adjusting idle speed Engine 104, 119, 120 LH (dh0b02pm10041x)
   07.41 - Checking and readjusting idle, emission value_lambda control (LH-SFI) (ap07.41-p-0750a)
   07.41 - Removing and installing hot wire mass air flow sensor (ar07.41-p-1453e)
   07.41 - Removing and installing LH-SFI variable reference resistor (ar07.41-p-1459e)
   07.61 - Test_adjust idle speed, emission value_lambda control (ME-SFI) (ap07.61-p-0750a)
08_Electric Drive, Hybrid Drive
   08.00 - Capacities Passenger cars Electrical drive system (bf08.00-z-9999az)
   08.00 - Forms Passenger cars Electrical drive system (of08.00-z-3999az)
   08.00 - Test and adjustment values Passenger cars Electrical drive system (be08.00-z-9999az)
   08.00 - Tightening torques Passenger cars Electrical drive system (ba08.00-z-9999az)
09_Air Intake, Turbocharging
   09.00 - Forms Passenger cars Air intake, supercharging (of09.00-z-3999az)
   09.00 - Technical modifications Passenger cars Air intake, supercharging (bt09.00-z-9999az)
   09.00 - Test and adjustment values Passenger cars Air intake, supercharging (be09.00-z-9999az)
   09.00 - Tightening torques Passenger cars Air intake, supercharging - - ba09.00-z-9999az)
   09.10 - 0980 - Replacement of the air cleaner element All engines except 116, 117 with air pump Models 107 from 8_85, 123, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh0980pkw0000x)
   09.10 - Luftfilter aus-, einbauen (ar09.10-p-1050e)
   09.10 - Removing and installing intake scoop (ar09.10-p-8221eb)
   09.20 - 0010 - Intake manifold A. Engine 104, B. Engine 119, C. Engine 120, D. National versions (J) and (USA) Function desciption LH - Injection System (ra1400flh0010x)
   09.20 - Removing and installing intake manifold (ar09.20-p-1310ea)
   09.20 - Removing and installing intake manifold (ar09.20-p-1310e)
13_Air Compressor, Belt Drives
   13.00 - Technical modifications Passenger cars Air compressor, belt drives (bt13.00-z-9999az)
   13.00 - Test and adjustment values Passenger cars Air compressor, belt drives (be13.00-z-9999az)
   13.00 - Tightening torques Passenger cars Air compressor, belt drives - - ba13.00-z-9999az)
   13.20 - 1351 - Poly V-belts - Check condition All engines (single-belt drive) Models 107 from 8_85, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh1351pkw0000x)
   13.20 - 3420 - Removal and installation of the poly V-belt 1st version, 2_3 version Engine 119 (ra13001193420x)
   13.20 - 3430 - Examination poly V-belt, damage patterns Engine 119 (ra13001193430x)
   13.20 - 3440 - Poly V-belts, running diagrams, dimensions Engine 119 (ra13001193440x)
   13.22 - Check visible area of poly-V belt for wear (ap13.22-p-1352z)
   13.25 - 3450 - Removal and installation of the tensioning device 1st version, 2nd and 3rd version Engine 119 (ra13001193450x)
   13.25 - 3452 - Inspecting tensioning device (1st version) Engine 119 (ra13001193452x)
14_Exhaust Manifold, Engine Brake, Emission Control System
   14.00 - 000 588 01 71 00 Extraction pump (ws14.00-p-0013b)
   14.00 - 000 588 08 21 00 Test and measuring kit (ws14.00-p-0012b)
   14.00 - 103 589 01 39 00 Caulking bolt (ws14.00-n-0001b)
   14.00 - Capacities Passenger cars Exhaust manifold, engine brake, emission control system - - bf14.00-z-9999az)
   14.00 - Certificates Passenger cars Exhaust manifold, engine brake, emission control system (of14.00-z-1999az)
   14.00 - Remove_install the oxygen sensor (ar14.00-p-5303e)
   14.00 - Technical modifications Passenger cars Exhaust manifold, engine brake, emission control system (bt14.00-z-9999az)
   14.00 - Test and adjustment values Passenger cars Exhaust manifold, engine brake, emission control system (be14.00-z-9999az)
   14.00 - Tightening torques Passenger cars Exhaust manifold, engine brake, emission control system - - ba14.00-z-9999az)
   14.10 - 0020 - Exhaust manifold A. Engine 104, B. Engine 119, C. Engine 120 Function desciption LH - Injection System (ra1400flh0020x)
   14.10 - Remove_install exhaust manifold on right (ar14.10-p-4005e)
   14.10 - Remove_install left exhaust manifold (ar14.10-p-3930e)
   14.20 - Removing and installing exhaust gas recirculation valve (ar14.20-p-7662e)
   14.30 - Remove_install air pump (ar14.30-p-7251ea)
   14.30 - Remove_install air pump (ar14.30-p-7251e)
   14.30 - Remove_install air pump belt pulley (ar14.30-p-7252f)
   14.30 - Removing and installing electromagnetic coupling (ar14.30-p-7264d)
   14.40 - Service Information Fill AdBlue container (si14.40-p-0014a)
   14.40 - Service Information Return delivery of AdBlue tank (si14.40-p-0023a)
15_Electrical System - Engine
   15.00 - 000 588 03 19 00 Load tester (ws15.00-p-0027b)
   15.00 - 000 589 55 37 00 Cable pliers (ws15.00-p-0001b)
   15.00 - 0010 - Function description Notes regarding working on breakerless ignition system LH Injection System (ra1500flh0010x)
   15.00 - 0020 - Function desciption Electronic ignition system with variable ignition characteristics and anti-knock control (EZL) LH Injection System (ra1500flh0020x)
   15.00 - 119 589 02 09 00 Spark plug wrench (ws15.00-p-0007a)
   15.00 - 120 589 02 09 00 Spark plug wrench (ws15.00-p-0008a)
   15.00 - 124 589 09 63 00 Ohm decade (ws15.00-n-0009c)
   15.00 - 124 589 09 63 00 Ohm decade (ws15.00-p-0009c)
   15.00 - 129 589 05 63 00 22-pin test cable (ws15.00-p-0012b)
   15.00 - 140 589 10 63 00 Test cable (ws15.00-p-0013b)
   15.00 - 201 589 00 99 00 Electrical connection kit (ws15.00-n-0014c)
   15.00 - 602 589 00 10 00 Socket wrench (ws15.00-p-0015b)
   15.00 - Check spark plugs and replace if necessary (ap15.00-p-1550z)
   15.00 - Forms Passenger cars Electrical system - engine (of15.00-z-3999az)
   15.00 - Technical modifications Passenger cars Electrical system - engine (bt15.00-z-9999az)
   15.00 - Test and adjustment values Passenger cars Electrical system - engine (be15.00-z-9999az)
   15.00 - Tightening torques Passenger cars Electrical system - engine - - ba15.00-z-9999az)
   15.10 - 1580 - Replacement of the spark plugs Gasoline engines Models 107 from 8_85, 123, 124, 126 from 9_85, 129, 140 to 6_93, 201 from 1_85 (wh1580pkw0000x)
   15.10 - C - Diagnostic Testers 46 - Diagnostic test - Smoth engine running, general All Engines (dh0c00pm10046x)
   15.10 - C - Diagnostic Testers 47 - Diagnostic test - Single cylinder analysis All Engines (dh0c00pm10047x)
   15.10 - Replace spark plugs (ap15.10-p-1580ea)
   15.10 - Service Information Spark plug connector grease (si15.10-p-0004a)
   15.12 - C - Diagnostic Testers 43 - Diagnostic Test - Ignition Coil Test (only Bear tester) All Engines (dh0c00pm10043x)
   15.12 - Remove_install knock sensors (ar15.12-p-2184e)
   15.12 - Removing and installing, adjusting camshaft position sensor (ar15.12-p-2143e)
   15.12 - Removing and installing crankshaft position sensor (ar15.12-p-2133e)
   15.12 - Removing and installing high voltage distributor cap, high voltage distributor rotor (ar15.12-p-1928e)
   15.12 - Removing and installing ignition coils (ar15.12-p-2003e)
   15.12 - Replacing ignition cables with M3 cable screw (ar15.12-p-0512g)
   15.18 - Servicing wiring harness (ar15.18-p-0500a)
   15.30 - Removing and installing starter (ar15.30-p-7100ec)
   15.30 - Service Information Return delivery of starter diagnostic data (si15.30-p-0002a)
   15.40 - C - Diagnostic Testers 44 - Diagnostic test - Alternater test All Engines (dh0c00pm10044x)
   15.40 - Check charging current of alternator (ar15.40-p-5011c)
   15.40 - Checking regulation voltage of alternator (ar15.40-p-5010c)
   15.40 - Prerequisites for testing alternator (ar15.40-p-5009c)
   15.40 - Remove_install alternator (ar15.40-p-5032cs)
   15.40 - Remove_install alternator belt pulley (ar15.40-p-5710cs)
   15.40 - Removing and installing regulator of generator (ar15.40-p-5760cs)
   15.40 - Retrofit smaller poly-V belt pulley and aluminum fan wheel (an15.40-p-5700cs)
18_Engine Lubrication, Engine Oil Cooling
   18.00 - 000 588 05 82 00 Oil extraction sensor (ws18.00-p-0027b)
   18.00 - 000 588 06 82 00 Oil dispenser (ws18.00-p-0026b)
   18.00 - 103 589 02 09 00 Wrench socket (ws18.00-p-0004a)
   18.00 - 115 589 15 21 00 Dipstick (ws18.00-p-0008b)
   18.00 - 117 589 02 07 00 Pin box wrench (ws18.00-p-0009a)
   18.00 - 120 589 06 21 00 Dipstick (ws18.00-p-0010b)
   18.00 - 124 589 07 21 00 Remote thermometer (ws18.00-p-0011b)
   18.00 - Capacities Passenger cars Engine lubrication, engine oil cooling - - bf18.00-z-9999az)
   18.00 - Engine oil and filter change (ap18.00-p-0101aa)
   18.00 - Engine oil and filter change (ap18.00-p-0101ag)
   18.00 - Forms Passenger cars Engine lubrication, engine oil cooling (of18.00-z-3999az)
   18.00 - Service Information Engine oil change (si18.00-p-0011b)
   18.00 - Technical modifications Engine lubrication, engine oil cooling Engine 119 (ra1800119ta00x)
   18.00 - Technical modifications Passenger cars Engine lubrication, engine oil cooling (bt18.00-z-9999az)
   18.00 - Test and adjustment values Passenger cars Engine lubrication, engine oil cooling (be18.00-z-9999az)
   18.00 - Test Sheet for Oil Consumption Test Passenger vehicles Models 124 (engine 119.974_975), 129 (engine 119.960_972) (wb6516lit7470z)
   18.00 - Test sheet for oil consumption test (Weight method) Passenger cars and cross country vehicles (wb6516lit7401z)
   18.00 - Tightening torques Passenger cars Engine lubrication, engine oil cooling - - ba18.00-z-9999az)
   18.10 - 2100 - Removal and installation of the oil pump Engine 119 Models 124, 129 (ra18001192100x)
   18.10 - 2150 - Removal and installation of the oil pressure relief valve (oil pump) Engine 119 Models 124, 129 (ra18001192150x)
   18.20 - 1100 - B. Removing and installing oil filter housing Model 129 Engines 119.96, 119.97, and 119.98 (ra180b1191100x)
   18.20 - 1110 - Function of the oil filter Engine 119 (ra18001191110x)
   18.20 - 1120 - Removing and installing oil return check valve in oil filter Engine 119 (ra18001191120x)
   18.30 - 1300 - Removal and installation of the air-to-oil cooler A. Model 124.036, B. Model 129 Engine 119 (ra18001191300x)
   18.40 - 0070 - Testing the oil pressure and sensor Engine 119 in Model 129 (ra18001190070x)
   18.40 - 0090 - Function of the oil pressure indicator Engine 119 in Model 129 (ra18001190090x)
   18.40 - 3100 - Function of the electrical oil level indicator Engine 119 Models 129, 210 (ra18001193100x)
   18.40 - 3300 - Removal and installation of the oil level sensor Engine 119 (ra18001193300x)
20_Engine Cooling System
   20.00 - 000 589 77 63 00 Adapter (ws20.00-p-0002b)
   20.00 - 0020 - Switching points in cooling system Engine 119 in Models 124, 129, 140, and 210 (ra20001190020x)
   20.00 - 0100 - Draining and filling coolant, anti-freeze protection table Engine 119 in Models 124, 129, 140, and 210 (ra20001190100x)
   20.00 - 0160 - Removing oil in cooling and heating system Engine 119 in Models 124, 129, 140, and 210 (ra20001190160x)
   20.00 - 0170 - Leak test of the cooling system Engine 119 in Models 124, 129, 140, and 210 (ra20001190170x)
   20.00 - 103 589 01 09 00 Screwdriver bit (ws20.00-n-0005b)
   20.00 - 117 589 00 90 00 Flushing pipe (ws20.00-p-0009c)
   20.00 - 119 589 00 03 00 Box wrench bit (ws20.00-p-0010c)
   20.00 - 119 589 00 09 00 Socket (ws20.00-p-0011c)
   20.00 - 120 589 02 01 00 Open-end wrench (ws20.00-p-0012b)
   20.00 - 120 589 14 07 00 Screwdriver (ws20.00-p-0013b)
   20.00 - 124 589 00 91 00 Test cap (ws20.00-p-0018b)
   20.00 - 124 589 24 21 00 Pressure pump (ws20.00-p-0016b)
   20.00 - 210 589 00 91 00 Test cap (ws20.00-p-0017b)
   20.00 - 285 589 00 21 00 Cooler vacuum filling device (ws20.00-p-0030b)
   20.00 - 4300 - Testing the cooling system cap Models 124, 129, 140, and 210 Engine 119 (ra20001194300x)
   20.00 - 4400 - Function of the electrical coolant level indicator A. Model 124, B. Models 129_140 Engine 119 (ra20001194400x)
   20.00 - Capacities Passenger cars Engine cooling system - - bf20.00-z-9999az)
   20.00 - Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion_antifreeze protection, adjust to correct concentration (ap20.00-p-2010z)
   20.00 - Replace coolant (ap20.00-p-2080a)
   20.00 - Technical modifications Engine cooling, coolant, radiator Engine 119 (ra2000119ta00x)
   20.00 - Technical modifications Passenger cars Engine cooling system (bt20.00-z-9999az)
   20.00 - Test and adjustment values Passenger cars Engine cooling system - - be20.00-z-9999az)
   20.00 - Tightening torques Passenger cars Engine cooling system - - ba20.00-z-9999az)
   20.10 - 1100 - Removal and installation of the coolant thermostat Engine 119 in Models 124, 129, 140, and 210 (ra20001191100x)
   20.10 - 2100 - Removal and installation of the coolant pump Engine 119 in Models 124, 129, 140, and 210 (ra20001192100x)
   20.20 - 0150 - Notes on coolant hoses Engine 119 in Models 124, 129, 140, and 210 (ra20001190150x)
   20.20 - 4200 - Removal and installation of the radiator A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194200x)
   20.30 - 4500 - Removal and installation of the expansion reservoir A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194500x)
   20.30 - 4540 - Removal and installation of the overflow reservoir A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001194540x)
   20.40 - 3120 - Removal and installation of the viscous fan clutch A. Model 124, B. Model 129, C. Model 140 Engine 119 (ra20001193120x)
   20.40 - 3140 - Removal and installation of the viscous fan clutch bearing bracket A. Model 124, B. Model 129 Engine 119 (ra20001193140x)
22_Engine Suspension
   22.00 - Tightening torques Passenger cars Engine suspension - - ba22.00-z-9999az)
   22.10 - 2110 - B. Removing and installing front engine mounts Model 129 Engine 119 (ra220b1192110x)
   22.10 - 2120 - Removal and installation of the rear engine mount A. Model 124, 140, B. Model 129, C. Model 210 Engine 119 (ra22001192120x)
25_Clutch
   25.00 - 000 588 01 82 00 Filling unit (ws25.00-p-0016b)
   25.00 - 000 589 47 31 00 Alignment tool (ws25.00-p-0003b)
   25.00 - 115 589 07 23 00 Inspection gauge (ws25.00-n-0001a)
   25.00 - 201 589 08 15 00 Alignment punch (ws25.00-n-0002b)
   25.00 - Technical modifications Passenger cars Clutch (bt25.00-z-9999az)
   25.00 - Test and adjustment values Passenger cars Clutch (be25.00-z-9999az)
   25.00 - Tightening torques Passenger cars Clutch (ba25.00-z-9999az)
   25.10 - 2551 - Checking the clutch plate wear Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2551pkw0000x)
   25.10 - Checking clutch disk for wear when installed (ar25.10-p-0020a)
   25.10 - Remove_install clutch (ar25.10-p-0050a)
   25.20 - Bleeding the clutch actuation (ar25.20-p-0070a)
   25.20 - Removing and installing master cylinder (ar25.20-p-0100a)
   25.20 - Removing and installing slave cylinder (ar25.20-p-0150a)
26_Manual Transmission
   26.00 - 000 588 04 19 00 Inclinometer (ws26.00-p-0140b)
   26.00 - 000 588 10 62 00 Support plate (ws26.00-p-3309b)
   26.00 - 711 589 03 15 00 Drift (ws26.00-n-3263b)
   26.00 - 711 589 07 15 00 Drift (ws26.00-n-3400c)
   26.00 - Capacities Passenger cars Manual transmission (bf26.00-z-9999az)
   26.00 - Forms Passenger cars Manual transmission (of26.00-z-3999az)
   26.00 - Technical modifications Passenger cars Manual transmission (bt26.00-z-9999az)
   26.00 - Test and adjustment values Passenger cars Manual transmission (be26.00-z-9999az)
   26.00 - Tightening torques Passenger cars Manual transmission - - ba26.00-z-9999az)
27_Automatic Transmission
   27.00 - 0001 - Installation survey, test and pressure data, basic and national versions Automatic transmission 722.3 from 09_88 (ra27037220001x)
   27.00 - 0002 - Transmission ratios Automatic transmission 722.3 from 09_88 (ra27037220002x)
   27.00 - 000 588 08 82 00 Transmission flushing unit (ws27.00-p-0137b)
   27.00 - 000 589 52 37 00 Pliers (ws27.00-p-0001c)
   27.00 - 001 589 50 33 00 Puller (ws27.00-p-3116c)
   27.00 - 0320 - Testing during the road test Automatic transmission 722.3 from 09_88 (ra27037220320x)
   27.00 - 112 589 00 72 00 Hand pump (ws27.00-n-0003a)
   27.00 - 115 589 01 07 00 Pin wrench socket (ws27.00-p-0005b)
   27.00 - 115 589 08 07 00 Pin wrench socket (ws27.00-p-0006b)
   27.00 - 116 589 00 15 00 Drive shaft (ws27.00-p-0010c)
   27.00 - 116 589 06 59 00 Assembly stand (ws27.00-p-0014c)
   27.00 - 123 589 04 21 00 Tester (ws27.00-p-0018b)
   27.00 - 124 589 19 21 00 Pulse counter (ws27.00-p-0019b)
   27.00 - 126 589 00 35 00 Assembly device (ws27.00-n-0020c)
   27.00 - 126 589 02 09 00 Socket wrench bit (ws27.00-p-0022b)
   27.00 - 126 589 03 14 00 Sleeve (ws27.00-p-0023c)
   27.00 - 126 589 04 14 00 Sleeve (ws27.00-p-0024c)
   27.00 - 126 589 04 31 00 Parallel rest (ws27.00-p-0025c)
   27.00 - 126 589 06 21 00 Measuring screw (ws27.00-p-0026c)
   27.00 - 126 589 10 14 00 Sleeve (ws27.00-p-0027c)
   27.00 - 126 589 10 63 00 Mounting plate (ws27.00-p-0028c)
   27.00 - 126 589 12 63 00 Funnel (ws27.00-p-0029a)
   27.00 - 129 589 05 63 00 22-pin test cable (ws27.00-p-0032b)
   27.00 - 129 589 06 23 00 Gauging disk (ws27.00-p-0033c)
   27.00 - 129 589 13 63 00 41-pin test cable (ws27.00-p-0034b)
   27.00 - 140 589 00 14 00 Sleeve (ws27.00-p-0035c)
   27.00 - 140 589 06 34 00 Collet chuck (ws27.00-p-0053c)
   27.00 - 140 589 12 15 00 Drift (ws27.00-p-0048b)
   27.00 - 140 589 13 43 00 Assembly device (ws27.00-p-0049c)
   27.00 - 140 589 14 63 00 Adapter (ws27.00-p-0037b)
   27.00 - 140 589 15 21 00 Dipstick (ws27.00-p-0047b)
   27.00 - 140 589 34 63 00 Mounting plate (ws27.00-p-0051c)
   27.00 - 140 589 43 63 00 Test cable, 30-pin (ws27.00-p-0050b)
   27.00 - 140 589 49 63 00 Filling pipe (ws27.00-p-0055a)
   27.00 - 168 589 00 62 00 Handle (ws27.00-p-0062b)
   27.00 - 168 589 03 21 00 Parallel support (ws27.00-p-0076c)
   27.00 - 168 589 10 15 00 Drift (ws27.00-p-0061b)
   27.00 - 201 589 03 59 00 Assembly device (ws27.00-n-0043c)
   27.00 - 201 589 12 43 00 Assembly tool (ws27.00-p-0046c)
   27.00 - 208 589 00 21 00 Pressing tool (ws27.00-p-0064c)
   27.00 - 210 589 00 37 00 Pliers (ws27.00-p-0054b)
   27.00 - 606 589 00 37 00 Pliers (ws27.00-p-3117b)
   27.00 - 722 589 00 15 00 Drift punch (ws27.00-n-3121b)
   27.00 - 722 589 01 90 00 Set of adapters (ws27.00-p-0165b)
   27.00 - 722 589 02 15 00 Drift (ws27.00-n-3123c)
   27.00 - 722 589 03 09 00 Assembly tool (ws27.00-p-0143b)
   27.00 - 722 589 16 15 00 Drift (ws27.00-p-0100b)
   27.00 - 9000 - Design of the transmissions Automatic transmission 722.3_4_5 (ra27007229000x)
   27.00 - 9020 - Driving tips Automatic transmission 722.3_4_5 (ra27007229020x)
   27.00 - 9070 - Power flow in the gears A. 4-speed, B. 5-speed Automatic transmission 722.3_4_5 (ra27007229070x)
   27.00 - 9080 - Gear reduction ratios Automatic transmission 722.3_4_5 (ra27007229080x)
   27.00 - 9130 - Lubricating pressure Automatic transmission 722.3_4_5 (ra27007229130x)
   27.00 - 9320 - Transmission overload protection Automatic transmission 722.3_4_5 (ra27057229320x)
   27.00 - Capacities Passenger cars Automatic transmission (bf27.00-z-9999az)
   27.00 - Checking oil level in automatic transmission and correcting, if necessary (ar27.00-p-0100a)
   27.00 - Check oil level in automatic transmission and correct if necessary. (ar27.00-p-0100ac)
   27.00 - Forms Passenger cars Automatic transmission (of27.00-z-3999az)
   27.00 - Service Information Heating up automatic transmission fluid for testing and repair work (si27.00-p-0005a)
   27.00 - Service information Operation items (si27.00-p-0008a)
   27.00 - Service Information Replacing the pilot bushing when repairing automatic transmissions (si27.00-p-0003a)
   27.00 - Technical modifications Automatic transmissions Automatic transmission 722.3 as of 09_88 (ra2703722ta00x)
   27.00 - Technical modifications Passenger cars Automatic transmission (bt27.00-z-9999az)
   27.00 - Test and adjustment values Passenger cars Automatic transmission (be27.00-z-9999az)
   27.00 - Tightening torques Passenger cars Automatic transmission - - ba27.00-z-9999az)
   27.10 - 0350 - Measurement and adjustment of the pressures Automatic transmission 722.3 from 09_88 (ra27037220350x)
   27.10 - 0430 - Removal, installation, disassembly and assembly of lower cover with intermediate plate Automatic transmission 722.3 from 09_88 (ra27037220430x)
   27.10 - 0520 - Removal and installation of the centrifugal governor Automatic transmission 722.3 from 09_88 (ra27037220520x)
   27.10 - 0530 - Removal, installation, disassembly and assembly of secondary pump (transmission in situ) Automatic transmission 722.3 from 09_88 (ra27037220530x)
   27.10 - 0600 - A. Removing and installing transmission with torque converter Vehicles without 4MATIC Automatic transmission 722.3 as of 09_88 (ra2703722a600x)
   27.10 - 0630 - Removal and installation of front transmission cover and primary pump Automatic transmission 722.3 from 09_88 (ra27037220630x)
   27.10 - 0640 - A. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722a640x)
   27.10 - 0640 - B. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722b640x)
   27.10 - 0640 - C. Dismantling and assembling transmission Automatic transmission 722.3 from 09_88 (ra2703722c640x)
   27.10 - 2702 - Automatic transmission Oil and filter change Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2702pkw0000z)
   27.10 - 2710 - Automatic transmission Checking and correcting the oil level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh2710pkw0000x)
   27.10 - 9060 - Mechanical design of the transmissions A. 4-speed, B. 5-speed Automatic transmission 722.3_4_5 (ra27007229060x)
   27.10 - 9100 - Primary and secondary pumps A. General, B. Primary pump, C. Secondary pump Automatic transmission 722.3_4_5 (ra27007229100x)
   27.10 - ATF change in automatic transmission with filter change (ap27.10-p-2702aa)
   27.10 - Automatic transmission (AT), contents, function description (gf27.10-p-0999zz)
   27.10 - Automatic transmission model and component installation survey as-built configuration (gf27.10-p-0801aa)
   27.10 - Remove_install oil pump (ar27.10-p-0400a)
   27.10 - Remove_install transmission with torque converter (ar27.10-p-0500b)
   27.10 - Survey of system components, automatic transmission (AT), location _ task _ design _ function (gf27.10-p-9990zz)
   27.18 - 0425 - Removal and installation of the vacuum box Automatic transmission 722.3 from 09_88 (ra27037220425x)
   27.19 - 0130 - Removal, installation and adjustment of the starter lockout switch Automatic transmission 722.3 from 09_88 (ra27037220130x)
   27.19 - Disassemble and assemble electrohydraulic controller unit (ar27.19-p-0220a)
   27.19 - Electronic transmission control (ETC) diagnosis contents (ad27.19-p-1000az)
   27.19 - Remove_install electrohydraulic controller unit (transmission installed) (ar27.19-p-0200a)
   27.19 - Replace pilot bushing in electrohydraulic controller unit (ar27.19-p-0230a)
   27.19 - Service Information Damage code for transmission software release (si27.19-p-0011a)
   27.19 - Service information on electro-hydraulic control unit (si27.19-p-0001a)
   27.20 - 9030 - Torque convertor Automatic transmission 722.3_4_5 (ra27007229030x)
   27.30 - 0440 - Removal, installation, disassembly and assembly of rear cover (transmission in situ) Automatic transmission 722.3 from 09_88 (ra27037220440x)
   27.35 - 0400 - Removal, installation, disassembly and assembly of shift valve body Automatic transmission 722.3 from 09_88 (ra27037220400x)
   27.35 - Dismantle and assemble shift plate (ar27.35-p-0350a)
   27.40 - Remove_install oil pump radial shaft sealing ring (ar27.40-p-0300a)
   27.50 - 0660 - Disassembly, assembly and measuring the gear set Automatic transmission 722.3 from 09_88 (ra27037220660x)
   27.50 - 9040 - Design and operating principle of a single planet gear set A. General, B. Design, C. Operating principle (ra27007229040x)
   27.50 - 9050 - Design and operating principle of a Ravigneaux planet gear set Automatic transmission 722.3_4_5 (ra27007229050x)
   27.50 - Detach_attach transmission housing on torque converter housing. (ar27.50-p-0601a)
   27.50 - Disassemble_assemble multi-disk brake B2 (ar27.50-p-0880a)
   27.50 - Disassemble_assemble output shaft with center and rear gear set (ar27.50-p-0810a)
   27.50 - Disassembling and assembling rear hollow shaft with rear freewheel (ar27.50-p-0850a)
   27.50 - Dismantling and assembling multi-disk brake B1 (ar27.50-p-0870a)
   27.50 - Remove_install multi-disk brake B1 and oil pump (ar27.50-p-0721a)
   27.50 - Remove_install multi-disk brake B2, disk pack B3 and park pawl gear (ar27.50-p-0781a)
   27.50 - Removing and installing multiple-disc clutches K1, K2 and K3 (ar27.50-p-0621a)
   27.51 - 0680 - Disassembly, assembly and measuring the clutch, K1 Automatic transmission 722.3 from 09_88 (ra27037220680x)
   27.51 - 0690 - Disassembly, assembly and measuring of clutch, K2 Automatic transmission 722.3 from 09_88 (ra27037220690x)
   27.51 - 9220 - Damper systems, A. General, B. Engaging damper system, C. Damper systems clutch K1, K2 and brake band B1 Automatic transmission 722.3_4_5 (ra27057229220x)
   27.51 - Disassemble and assemble clutch K3. (ar27.51-p-0830a)
   27.51 - Disassemble_assemble clutch K1 (ar27.51-p-0800b)
   27.51 - Dismantling and assembling drive shaft with clutch K2 and front gear set (ar27.51-p-0825a)
   27.55 - Flushing out oil cooler lines and oil cooler (ar27.55-p-0001a)
   27.55 - Flush out automatic transmission and torque converter (ar27.55-p-0100a)
   27.55 - Flush out automatic transmission and torque converter (ar27.55-p-0100b)
   27.60 - 0110 - Adjustment of the cable for the control pressure Automatic transmission 722.3 from 09_88 (ra27037220110x)
   27.60 - 0120 - A. Adjusting shift rod Models 124 without 4MATIC, 126, 129, 140 Automatic transmission 722.3 as of 09_88 (ra2703722a120x)
   27.60 - 0140 - Testing and adjustment of the vacuum control valve Automatic transmission 722.3 from 09_88 Engine 603.96 (ra27037220140x)
   27.60 - 0330 - Shift points in selector lever position D Automatic transmission 722.3 from 09_88 (ra27037220330z)
   27.60 - 0740 - B. Adjusting and checking parking lock Model 129 as of 09_89 Automatic transmission 722.3 from 09_88 (ra2703722b740x)
   27.60 - 0740 - C. Adjusting and checking parking lock Models 124,126,129 as of 09_89 Automatic transmission 722.3 from 09_88 (ra2703722c740x)
   27.60 - 0745 - B. Removing, installing, dismantling and assembling floor shift Model 129 Automatic transmission 722.3 from 09_88 (ra2703722b745x)
   27.60 - 9010 - Function ranges A. Selector-lever positions, B. Shift operations Automatic transmission 722.3_4_5 (ra27007229010x)
   27.60 - 9110 - Operating pressure A. General, B. Control in basic pressure range (deceleration), C. Control under engine load, Automatic transmission 722.3_4_5 (ra27007229110x)
   27.60 - 9120 - Modulating pressure Automatic transmission 722.3_4_5 (ra27007229120x)
   27.60 - 9140 - Control pressure A. Pressures S1 and S2, B. Kickdown pressure S3 Automatic transmission 722.3_4_5 (ra27007229140x)
   27.60 - 9150 - Governor pressure Automatic transmission 722.3_4_5 (ra27007229150x)
   27.60 - 9160 - Boosted governor pressure Automatic transmission 722.3_4_5 (ra27007229160x)
   27.60 - 9170 - Shift pressure Getriebe 722.3_4_5 (ra27007229170x)
   27.60 - 9180 - Function of the command valves and sequence of gearshifts Automatic transmission 722.3_4_5 (ra27007229180x)
   27.60 - 9200 - Downshifts when accelerating (function of the reaction valves) A. General, B. 3-2 downshift, C. 4-3 downshift Automatic transmission 722.3_4_5 (ra27057229200x)
   27.60 - 9210 - Selector lever downshifts Automatic transmission 722.3_4_5 (ra27057229210x)
   27.60 - 9270 - Drive position B Automatic transmission 722.3_4_5 (ra27057229270x)
   27.60 - 9280 - Kickdown cut-off Automatic transmission 722.3_4_5 (ra27057229280x)
   27.60 - 9290 - Mode selector switch Automatic transmission 722.3_4_5 (ra27057229290x)
   27.60 - 9300 - Transmission shift point retard Automatic transmission 722.3_4_5 (ra27057229300x)
   27.60 - 9340 - Parking-shift lock Automatic Transmissions 722.3_4_5 (ra27057229340x)
   27.60 - 9350 - Selected speed indicator of floor mounted shift Automatic transmission 722.3_4_5 (ra27057229350x)
   27.60 - Adjusting shift rod (ar27.60-p-0980b)
   27.60 - Adjusting wire cables for parking lock interlock (ar27.60-p-0965a)
   27.60 - Adjusting wire cables for parking lock interlock (ar27.60-p-0965b)
   27.60 - Adjust shift lock (ar27.60-p-0910a)
   27.60 - Disassembling and assembling floor shift (ar27.60-p-0920b)
   27.60 - Remove_install floor selector (ar27.60-p-0900b)
   27.60 - Remove_install park pawl mechanism (ar27.60-p-0950a)
   27.60 - Remove_install selector lever (ar27.60-p-0930a)
   27.60 - Removing and installing wire cable for parking lock interlock (ar27.60-p-1000a)
   27.60 - Removing and installing wire cable for parking lock interlock (ar27.60-p-1000b)
28_Transfer Case
   28.00 - Capacities Passenger cars Transfer case (bf28.00-z-9999az)
   28.00 - Forms Passenger cars Transfer case (of28.00-z-3999az)
   28.00 - Technical modifications Passenger cars Transfer case (bt28.00-z-9999az)
   28.00 - Test and adjustment values Passenger cars Transfer case (be28.00-z-9999az)
   28.00 - Tightening torques Passenger cars Transfer case - - ba28.00-z-9999az)
29_Pedal Assembly
   29.00 - Tightening torques Passenger cars Pedal assembly (ba29.00-z-9999az)
   29.10 - Disassembling and assembling pedal assembly (ar29.10-p-0350a)
   29.10 - Removal and installation of foot controls (ar29.10-p-0300a)
30_Throttle Control, Speed Control Systems
   30.00 - Certificates Passenger cars Throttle control, cruise control system (of30.00-z-1999az)
   30.00 - Programmed repair - Tempomat_cruise control - 30 Throttle control, Tempomat_cruise control (ra3000124pr00x)
   30.00 - Technical modifications Passenger cars Throttle control, cruise control system (bt30.00-z-9999az)
   30.00 - Test and adjustment values Passenger cars Throttle control, cruise control system (be30.00-z-9999az)
   30.00 - Tightening torques Passenger cars Throttle control, cruise control system (ba30.00-z-9999az)
   30.10 - Adjusting throttle control (ar30.10-p-1010ea)
   30.10 - Adjusting throttle control (ar30.10-p-1010eb)
   30.10 - Lubricate joint areas of throttle control, inspect for ease of operation and seating of joints (ap30.10-p-3022z)
   30.10 - Lubricate joints of engine control system, check joints for freedom of movement and proper seating (ap30.10-p-3022za)
   30.10 - Removing and installing throttle control cable (ar30.10-p-3400e)
   30.12 - Remove_install accelerator pedal (ar30.12-p-1321d)
   30.12 - Remove_install firewall pivot point with accelerator pedal lever (ar30.12-p-3022d)
   30.12 - Technical modifications Cruise control, Tempomat Models 124, 129, 140, 201 (ra3000124ta00x)
   30.16 - Cruise control system function description contents (gf30.16-p-0999a)
   30.20 - 0000 - General, Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0000x)
   30.20 - 0002 - Brief description of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0002x)
   30.20 - 0004 - Location of components, Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0004x)
   30.20 - 0006 - Function description of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0006x)
   30.20 - 0008 - Individual functions of Controls, Cruise Control System (EA, CC, ISC) (ra3000tpm0008x)
   30.20 - 0010 - Notes on towing as well as test and adjustment work (EA, CC, ISC) (ra3000tpm0010x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 11 - Diagnosis - Fault memory Engines 104, 119 LH (dh0602pm00011x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 12 - Diagnosis - Troubleshooting chart Engines 104, 119 LH (dh0602pm30012x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 21 - Test program - Electrics, Location of components Engines 104, 119 LH (dh0602pm30021x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 22 - Test program - Electrics, Prerequisites for testing Engines 104, 119 LH (dh0602pm30022x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 23 - Test program - Electrics, Test (EFP) Engines 104, 119 LH (dh0602pm00023x)
   30.20 - 6.2 - Electronic accelerator pedal (EFP) 24 - Test program - Electrics, Test (TPM) Engines 104, 119 LH (dh0602pm30024x)
   30.20 - Remove_install electronic accelerator actuator with valve fitting (ar30.20-p-1262a)
   30.20 - Remove_install electronic accelerator actuator with valve fitting (ar30.20-p-1262e)
   30.30 - 0500 - Functional description (Tempomat) (for manual transmission version valid to May 1993) Models 124, 129, 140, 201 (ra30001240500x)
   30.30 - 0504 - Testing with an adapter (Tempomat) Models 124, 129, 140, 201 (ra30001240504x)
   30.30 - 0506 - Testing the reference resistor (Tempomat) Models 124, 129, 140, 201 (ra30001240506x)
   30.30 - 0545 - Removal and installation of the push button switch (Tempomat) A. Model 124, 129, 140, and 201 from approx. 04_84, B. Model 201 up to approx. 04_84 (ra30001240545x)
   30.30 - 0565 - Removal and installation of the cruise control amplifier (Tempomat) A. Model 124, B. Model 129, C. Model 140, D. Model 201 (ra30001240565x)
   30.30 - 0566 - Removal and installation of cruise control reference resistor (Tempomat) A. Model 124, B. Model 129, C. Model 140, D. Model 201 (ra30001240566x)
   30.30 - 0575 - Removal and installation of switch on clutch pedal, to May 93 (Tempomat) Models 124, 129, 140, 201 (ra30001240575x)
   30.30 - 0579 - Layout of the connectors (Tempomat) Models 124, 129, 201 (ra30001240579x)
   30.30 - 0580.1 - Wiring diagrams (Tempomat) B. Model 124 with automatic transmission (ra30011240580x)
   30.30 - 0580 - Wiring diagrams (Tempomat) Models 124, 129, 140, 201 (ra300a1240580x)
   30.30 - 30.01 - Installation instructions Cruise control_Tempomat Model 129, LHD with automatic transmission (vehicles without ASR) (ea3001pb4es00x)
   30.30 - Service Information Warranty and goodwill policy for short-range radar sensors (si30.30-p-0003a)
31_Frame, Trailer Operation
   31.00 - Certificates Passenger cars Frame, trailer operation (of31.00-z-1999az)
   31.00 - Forms Passenger cars Frame, trailer operation (of31.00-z-3999az)
   31.00 - Test and adjustment values Passenger cars Frame, trailer operation (be31.00-z-9999az)
   31.00 - Tightening torques Passenger cars Frame, trailer operation (ba31.00-z-9999az)
   31.10 - 31.01 - Installation instructions, Trailer coupling A. Install trailer coupling, B. Install Electrical components (ea3101pb4es00x)
   31.10 - Removing and installing trailer coupling (ar31.10-p-8000t)
   31.11 - Lubricate and check operation of trailer hitch with detachable ball neck (ap31.11-p-3121ba)
   31.11 - Trailer hitch with detachable ball neck - clean after testing (ap31.11-p-3130z)
32_Suspension
   32.00 - 000 589 12 28 00 Knife (ws32.00-n-3046d)
   32.00 - 116 589 00 17 00 Box wrench (ws32.00-p-0004b)
   32.00 - 116 589 04 09 00 Retainer wrench (ws32.00-p-0007b)
   32.00 - 124 589 00 09 00 Socket wrench (ws32.00-p-0014b)
   32.00 - 124 589 19 21 00 Pulse counter (ws32.00-p-0015b)
   32.00 - 126 589 12 63 00 Funnel (ws32.00-p-0016a)
   32.00 - 126 589 14 21 00 Tester (ws32.00-p-0017b)
   32.00 - 129 589 00 03 00 Box wrench (ws32.00-p-0018b)
   32.00 - 129 589 00 63 00 35-pin test cable (ws32.00-p-0019b)
   32.00 - 129 589 13 63 00 41-pin test cable (ws32.00-p-0020b)
   32.00 - 140 589 04 63 00 Contacting module 4 (ws32.00-p-0021b)
   32.00 - 140 589 14 63 00 Adapter (ws32.00-p-0022b)
   32.00 - 202 589 01 31 00 Tensioning device (ws32.00-p-0040b)
   32.00 - 202 589 02 31 00 Tensioning device (ws32.00-p-0041b)
   32.00 - 202 589 13 63 00 Clamping plates (ws32.00-p-0042b)
   32.00 - 32.10 - AMG Accessories Conversion to AMG sports suspension - Models 129.058_060_061_063_066_067 Vehicles without level control on rear axle (USA versions are excluded) (ea3210pez0000x)
   32.00 - 32.10 - Appendix to Installation instructions Conversion to AMG sports suspension - Models 129.058_060_061_063_066_067 Vehicles without level control on rear axle (ea3210pez0a00x)
   32.00 - 352 589 02 37 00 Pliers (ws32.00-n-3047c)
   32.00 - Capacities Passenger cars Suspension (bf32.00-z-9999az)
   32.00 - Locate noises from the suspension (ar32.00-p-2000a)
   32.00 - Technical modifications Passenger cars Suspension (bt32.00-z-9999az)
   32.00 - Test and adjustment values Passenger cars Suspension (be32.00-z-9999az)
   32.00 - Tightening torques Passenger cars Suspension (ba32.00-z-9999az)
   32.20 - Remove_install rear spring (ar32.20-p-0230a)
   32.20 - Removing and installing front spring (ar32.20-p-0200a)
   32.20 - Removing and installing torsion bar on front axle (ar32.20-p-0300a)
   32.20 - Removing and installing torsion bar on rear axle (ar32.20-p-0315a)
   32.25 - 0605 - Removing and installing front axle spring strut or shock absorber_ADS Level control with ADS A. Model 129 B. Model 140 (ra32001290605x)
   32.25 - Checking shock absorber strut (ar32.25-p-0120a)
   32.25 - Check shock absorber (ar32.25-p-0121a)
   32.25 - Remove_install rear shock absorber (ar32.25-p-0110a)
   32.25 - Removing and installing front shock absorber strut (ar32.25-p-0100a)
   32.25 - Service Information Assembly of suspension struts and shock absorbers (si32.25-p-0004a)
   32.25 - Service Information Replacement of shock absorbers (si32.25-p-0002a)
   32.30 - Check and correct level control, 4MATIC, ASD, ADS fluid level (ap32.30-p-3211ba)
   32.31 - Check pressure oil pump of level control (ar32.31-p-0510a)
   32.31 - Empty_fill pressurized oil system on front and rear axle (ar32.31-p-0630a)
   32.31 - Remove_install front axle damping valves (ar32.31-p-0685a)
   32.31 - Remove_install rear axle suspension strut (ar32.31-p-0610a)
   32.31 - Removing and installing front axle spring strut (ar32.31-p-0605a)
   32.31 - Removing and installing level control valve unit (ar32.31-p-0650a)
   32.31 - Removing and installing rear axle damper valve (ar32.31-p-0680a)
   32.31 - Removing and installing rear axle spring actuator (ar32.31-p-0615a)
   32.31 - Removing and installing rear axle spring actuator (ar32.31-p-0620a)
   32.32 - 0610 - Rear strut assembly, Removal and installation Level control with ADS A. Model 129 B. Model 140 (ra32001290610x)
   32.32 - 0615 - Front pressure accumulator, Removal and installation Level control with ADS Models 129, 140 (ra32001290615x)
   32.32 - 0620 - Rear pressure accumulator, Removal and installation Level control with ADS A. Model 129, B. Model 140 (ra32001290620x)
   32.32 - 0630 - Hydraulic system, Draining and refilling Level control with ADS A. Model 129 B. Model 140 (ra32001290630x)
   32.32 - 0650 - Level control valve assembly, Removal and installation Level control with ADS Models 129, 140 (ra32001290650x)
   32.32 - 0660 - Control_linkage rod on level controller, Removal and installation Level control with ADS A. thru D. Front and Rear axle Model 129, E. Rear axle Model 140 (ra32001290660x)
   32.32 - 0665 - Front level controller, Removal and installation Level control with ADS Models 129, 140 (ra32001290665x)
   32.32 - 0670 - Rear level controller, Removal and installation Level control with ADS A. Model 129 B. Model 140 (ra32001290670x)
   32.32 - 0680 - Damper valves, Removal and installation Level control with ADS A. Front axle Model 129, B. Rear axle Model 129, C. Rear axle Model 140 (ra32001290680x)
   32.32 - 3211 - Level control, 4MATIC, ASD, ADS Checking and correcting fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3211pkw0000x)
   32.32 - 3.2 - Adaptive damping system (ADS) 11 - Diagnosis - function check Models 129.058_063_067_076, 140 (dh0302pf10011x)
   32.32 - 3.2 - Adaptive damping system (ADS) 12 - Diagnosis - fault memory Models 129.058_063_067_076, 140 (dh0302pf10012x)
   32.32 - 3.2 - Adaptive damping system (ADS) 13 - Diagnosis - troubleshooting chart Models 129.058_063_067_076, 140 (dh0302pf10013x)
   32.32 - 3.2 - Adaptive damping system (ADS) 21 - Test programme - electrical, Location of components Models 129.058_063_067_076, 140 (dh0302pf10021x)
   32.32 - 3.2 - Adaptive damping system (ADS) 22 - Test programme - electrical, Conditions for test Models 129.058_063_067_076, 140 (dh0302pf10022x)
   32.32 - 3.2 - Adaptive damping system (ADS) 23 - Test programme - electrical Testing Models 129.058_063_067_076, 140 (dh0302pf10023x)
   32.32 - 3.2 - Adaptive damping system (ADS) 31 - Test programme - hydraulical, Location of components Models 129.058_063_067_076, 140 (dh0302pf10031x)
   32.32 - 3.2 - Adaptive damping system (ADS) 32 - Test programme - hydraulical, Testing pressure oil pump Models 129.058_063_067_076, 140 (dh0302pf10032x)
   32.32 - 3.2 - Adaptive damping system (ADS) 33 - Test programme - hydraulical, Level control - function test Models 129.058_063_067_076, 140 (dh0302pf10033x)
   32.32 - 3.2 - Adaptive damping system (ADS) 34 - Test programme - hydraulical, Level control - pressure test Models 129.058_063_067_076, 140 (dh0302pf10034x)
   32.32 - 3.2 - Adaptive damping system (ADS) 35 - Test programme - hydraulical, Testing pressure reservoir Models 129.058_063_067_076, 140 (dh0302pf10035x)
   32.32 - 3.2 - Adaptive damping system (ADS) 36 - Test programme - hydraulical, Testing spring struts of front axle for leaks Models 129.058_063_067_076, 140 (dh0302pf10036x)
   32.32 - 3.2 - Adaptive damping system (ADS) 37 - Test programme - hydraulical, Testing level adjustment (model 129) Models 129.058_063_067_076, 140 (dh0302pf10037x)
   32.32 - Adaptive damping system (ADS II), function description, contents (gf32.32-p-0999a)
   32.32 - Adaptive damping system (ADS II) with electronic level control diagnosis, contents (ad32.32-p-1000az)
   32.32 - Remove_install comfort_sport switch (ar32.32-p-0517sl)
   32.32 - Remove_install of wiring harness for adaptive damping system (ADS) (ar32.32-p-0505sl)
   32.32 - Removing, installing ADS control unit (ar32.32-p-0500a)
   32.32 - Replace (ADS) suspension control unit and adapt vehicle electrical system to control unit version (ar32.32-p-0501sl)
   32.32 - Survey of system components, adaptive damping system (ADS II), location _ task _ design _ function (gf32.32-p-9999a)
   32.32 - Technical modifications Level control Models 129, 140 with ADS (ra3200129ta01x)
33_Front Axle
   33.00 - 000 589 00 34 00 Chuck (ws33.00-p-0001c)
   33.00 - 0010 - Technical data Models 124, 129, 201 (ra33001240010x)
   33.00 - 001 589 50 33 00 Puller (ws33.00-p-0003c)
   33.00 - 116 589 22 33 00 Removal and installation tool (ws33.00-p-0016a)
   33.00 - 124 589 00 43 00 Removal and installation tool (ws33.00-p-0019c)
   33.00 - 129 589 03 43 00 Extraction and insertion tool (ws33.00-p-0059c)
   33.00 - 129 589 06 21 00 Lever depresser (ws33.00-p-0029a)
   33.00 - 140 589 00 01 00 Open-end wrench (ws33.00-p-0030c)
   33.00 - 140 589 02 31 00 Spreader (ws33.00-p-0036c)
   33.00 - 201 589 00 33 00 Puller (ws33.00-p-0044c)
   33.00 - 201 589 01 43 00 Installation tool (ws33.00-p-0045c)
   33.00 - 201 589 06 33 00 Installation tool (ws33.00-p-0051c)
   33.00 - 201 589 10 23 00 Bracket (ws33.00-p-0060a)
   33.00 - 201 589 10 33 00 Impact extractor (ws33.00-p-0052c)
   33.00 - 202 589 00 15 00 Drift punch (ws33.00-p-0053c)
   33.00 - 202 589 04 43 00 Extraction tool (ws33.00-p-0114b)
   33.00 - 210 589 03 43 00 Extraction and insertion tool (ws33.00-p-0115b)
   33.00 - 601 589 00 23 00 Measuring plate (ws33.00-p-0094c)
   33.00 - Capacities Passenger cars Front axle (bf33.00-z-9999az)
   33.00 - Forms Passenger cars Front axle (of33.00-z-3999az)
   33.00 - Locate noises from the front axle (ar33.00-p-2000a)
   33.00 - Service Information Threaded connections of rubber bushings and control arms (si33.00-p-0001a)
   33.00 - Technical modifications Front axle Models 124, 129, 201 (ra3300124ta00x)
   33.00 - Technical modifications Passenger cars Front axle (bt33.00-z-9999az)
   33.00 - Test and adjustment values Passenger cars Front axle (be33.00-z-9999az)
   33.00 - Tightening torques Passenger cars Front axle - - ba33.00-z-9999az)
   33.10 - 0200 - Removal and installation of the front axle halves Models 124, 129, 201 (ra33001240200x)
   33.10 - 0420 - Removal and installation of the steering knuckle arm Models 124, 129, 201 (ra33001240420x)
   33.10 - 0440 - Replacement of the supporting joint Models 124, 129, 201 (ra33001240440x)
   33.10 - 0526 - Replacement of the control arm mounting A. 2-piece mounting without clamping device, B. 2-piece mounting with clamping device, C. Single mounting with washer (ra33001240526x)
   33.15 - 3353 - Checking condition of the front axle joints A. Supporting joint, B. Follower joint Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3353pkw0000x)
   33.15 - 3355 - Checking the supporting joints with special tool Model 124 up to 6_93; 129 up to 6_93; 201 from 1_85 (wh3355pkw0000x)
   33.20 - 0300 - Adjustment of the wheel bearing play Models 124, 129, 201 (ra33001240300x)
   33.20 - 0310 - Removal and installation of the front wheel hub Models 124, 129, 201 (ra33001240310x)
   33.20 - 0320 - Replacement of the front wheel hub Models 124, 129, 201 (ra33001240320x)
   33.20 - Inspect front axle joint for play, inspect rubber boots (ap33.20-p-3353ba)
   33.25 - 0400 - Removal and installation of the steering knuckle Models 124, 129, 201 (ra33001240400x)
   33.25 - 0430 - Replacement of boot for supporting joint of steering knuckle mounting Models 124, 129, 201 (ra33001240430x)
35_Rear Axle
   35.00 - 000 589 02 34 00 Collet chuck (ws35.00-p-0002c)
   35.00 - 000 589 03 34 00 Thrust piece (ws35.00-p-0003c)
   35.00 - 000 589 24 07 00 Box wrench for Allen socket (ws35.00-p-0004a)
   35.00 - 000 589 33 34 00 Tensioning clamp (ws35.00-p-0005c)
   35.00 - 000 589 34 34 00 Chuck (ws35.00-p-0006c)
   35.00 - 000 589 38 19 00 Dial gage (ws35.00-p-0007c)
   35.00 - 000 589 63 34 00 Extension (ws35.00-p-0008c)
   35.00 - 001 589 49 21 00 Torque measuring instrument (ws35.00-p-0009b)
   35.00 - 001 589 50 33 00 Puller (ws35.00-p-0010c)
   35.00 - 111 589 08 23 00 Dial gauge holder (ws35.00-p-0012c)
   35.00 - 115 589 04 61 00 Assembly drift (ws35.00-p-0018c)
   35.00 - 115 589 05 21 00 Adjusting gauge (ws35.00-p-0019c)
   35.00 - 116 589 00 35 00 Removal tool (ws35.00-p-0023c)
   35.00 - 116 589 01 21 00 Measuring device (ws35.00-p-0025c)
   35.00 - 116 589 07 21 00 Measuring device (ws35.00-p-0030c)
   35.00 - 116 589 08 61 00 Assembly drift (ws35.00-p-0031c)
   35.00 - 116 589 11 31 00 Clamping jaws (ws35.00-p-0035c)
   35.00 - 116 589 11 61 00 Installer (ws35.00-p-0036c)
   35.00 - 116 589 15 15 00 Drift (ws35.00-p-0038c)
   35.00 - 116 589 18 61 00 Assembly drift (ws35.00-p-0040c)
   35.00 - 117 589 02 07 00 Pin ring wrench (ws35.00-p-0041a)
   35.00 - 123 589 06 15 00 Assembly drift (ws35.00-p-0043c)
   35.00 - 123 589 08 33 00 Puller (ws35.00-p-0044c)
   35.00 - 124 589 01 15 00 Drift punch (ws35.00-p-0045c)
   35.00 - 124 589 01 35 00 Installation tool (ws35.00-p-0046c)
   35.00 - 124 589 02 15 00 Drift (ws35.00-p-0048b)
   35.00 - 124 589 02 34 00 Thrust piece (ws35.00-p-0229b)
   35.00 - 124 589 02 43 00 Puller and installation tool (ws35.00-p-0049c)
   35.00 - 124 589 05 43 00 Extraction and insertion tool (ws35.00-p-0050c)
   35.00 - 124 589 07 21 00 Remote thermometer (ws35.00-p-0206c)
   35.00 - 124 589 14 21 00 Measuring device (ws35.00-p-0051c)
   35.00 - 124 589 19 21 00 Pulse counter (ws35.00-p-0053b)
   35.00 - 124 589 21 21 00 Gage pins (ws35.00-p-0054c)
   35.00 - 124 589 28 63 00 Test cable (ws35.00-p-0055b)
   35.00 - 126 589 00 15 00 Drift (ws35.00-p-0057c)
   35.00 - 126 589 00 21 00 Measuring device (ws35.00-p-0058c)
   35.00 - 126 589 00 31 00 Spreader (ws35.00-p-0059c)
   35.00 - 126 589 02 09 00 Socket wrench bit (ws35.00-p-0062b)
   35.00 - 126 589 02 15 00 Assembly drift (ws35.00-p-0063c)
   35.00 - 126 589 04 15 00 Drift punch (ws35.00-p-0064c)
   35.00 - 126 589 08 21 00 Contact arm (ws35.00-p-0065c)
   35.00 - 126 589 14 21 00 Tester (ws35.00-p-0066b)
   35.00 - 129 589 00 31 00 Assembly bracket (ws35.00-p-0067c)
   35.00 - 129 589 00 63 00 35-pin test cable (ws35.00-p-0069b)
   35.00 - 129 589 01 03 00 Box wrench (ws35.00-p-0070b)
   35.00 - 129 589 01 07 00 Pin wrench (ws35.00-p-0071b)
   35.00 - 129 589 01 33 00 Puller (ws35.00-p-0072b)
   35.00 - 129 589 01 43 00 Extraction and insertion tool (ws35.00-p-0073c)
   35.00 - 129 589 02 33 00 Removal tool (ws35.00-p-0074c)
   35.00 - 129 589 02 43 00 Removal and installation tool (ws35.00-p-0075c)
   35.00 - 129 589 12 63 00 Test cable (ws35.00-p-0076b)
   35.00 - 136 589 05 31 00 Retaining plate (ws35.00-p-0077c)
   35.00 - 140 589 00 01 00 Open-end wrench (ws35.00-p-0078c)
   35.00 - 140 589 00 08 00 Socket (ws35.00-p-0079c)
   35.00 - 140 589 00 34 00 Collet chuck (ws35.00-p-0081c)
   35.00 - 140 589 00 46 00 Drive flange (ws35.00-p-0082c)
   35.00 - 140 589 01 09 00 Socket (ws35.00-p-0083c)
   35.00 - 140 589 01 34 00 Collet chuck (ws35.00-p-0085c)
   35.00 - 140 589 01 43 00 Installation tool (ws35.00-p-0086c)
   35.00 - 140 589 01 62 00 Assembly support (ws35.00-p-0087b)
   35.00 - 140 589 02 15 00 Drift punch (ws35.00-p-0088b)
   35.00 - 140 589 02 34 00 Tensioning clamp (ws35.00-p-0089c)
   35.00 - 140 589 03 15 00 Drift (ws35.00-p-0091c)
   35.00 - 140 589 04 15 00 Sleeve (ws35.00-p-0094c)
   35.00 - 140 589 04 63 00 Contacting module 4 (ws35.00-p-0096b)
   35.00 - 140 589 05 31 00 Spreader (ws35.00-p-0155c)
   35.00 - 140 589 06 15 00 Drift (ws35.00-p-0100c)
   35.00 - 140 589 07 21 00 Measuring device (ws35.00-p-0102c)
   35.00 - 140 589 08 15 00 Drift (ws35.00-p-0148b)
   35.00 - 140 589 08 21 00 Backlash measuring instrument (ws35.00-p-0103c)
   35.00 - 140 589 09 15 00 Drift punch (ws35.00-p-0105c)
   35.00 - 140 589 10 15 00 Drift (ws35.00-p-0149c)
   35.00 - 140 589 10 43 00 Removal and installation tool (ws35.00-p-0107c)
   35.00 - 140 589 13 15 00 Drift (ws35.00-p-0192c)
   35.00 - 140 589 14 15 00 Drift (ws35.00-p-0191c)
   35.00 - 140 589 14 21 00 Measuring device (ws35.00-p-0156c)
   35.00 - 140 589 14 63 00 Adapter (ws35.00-p-0112b)
   35.00 - 140 589 16 15 00 Drift (ws35.00-p-0193c)
   35.00 - 140 589 16 23 00 Measuring plate (ws35.00-p-0113c)
   35.00 - 140 589 25 63 00 Magnet (ws35.00-p-0117c)
   35.00 - 140 589 39 63 00 Test cable for module 6 (ws35.00-p-0151b)
   35.00 - 140 589 40 63 00 Supports (2 ea.) (ws35.00-p-0157c)
   35.00 - 140 589 41 63 00 Intermediate rings (x 2) (ws35.00-p-0158c)
   35.00 - 201 589 00 34 00 Collet chuck (ws35.00-p-0121c)
   35.00 - 201 589 01 33 00 Puller (ws35.00-p-0125b)
   35.00 - 201 589 01 63 00 Stops (ws35.00-p-0128c)
   35.00 - 201 589 02 31 00 Plate (ws35.00-p-0130c)
   35.00 - 201 589 02 43 00 Removal and installation tool (ws35.00-p-0132c)
   35.00 - 201 589 03 31 00 Assembly stand (ws35.00-p-0134c)
   35.00 - 201 589 10 43 00 Puller and installation tool (ws35.00-p-0140c)
   35.00 - 201 589 11 43 00 Puller and installation tool (ws35.00-p-0141c)
   35.00 - 202 589 00 10 00 Retainer wrench (ws35.00-p-0178b)
   35.00 - 202 589 00 23 00 Mounting fixture (ws35.00-p-0142c)
   35.00 - 202 589 00 43 00 Removal and installation tool (ws35.00-p-0143c)
   35.00 - 202 589 04 43 00 Extraction tool (ws35.00-p-0153c)
   35.00 - 208 589 00 15 00 Drift (ws35.00-p-0179b)
   35.00 - 210 589 01 40 00 Bracket (ws35.00-p-0160c)
   35.00 - 210 589 02 43 00 Extraction and insertion tool (ws35.00-p-0147c)
   35.00 - 210 589 03 43 00 Extraction and insertion tool (ws35.00-p-0154c)
   35.00 - 210 589 04 43 00 Extractor tool (ws35.00-p-0159c)
   35.00 - 211 589 00 61 00 Assembly tool (ws35.00-p-0026b)
   35.00 - 220 589 01 63 00 Supports (ws35.00-p-0176b)
   35.00 - 220 589 02 31 00 Clamping jaws (ws35.00-p-0175b)
   35.00 - Capacities Passenger cars Rear axle (bf35.00-z-9999az)
   35.00 - Data Sheet Adjustment of the rear axle gears Passenger vehicles Models 107, 126, 129, 140, 210 (wb6516lit7415z)
   35.00 - Locate noises from rear axle (ar35.00-p-2000a)
   35.00 - Service information Differential leaky (si35.00-p-0004a)
   35.00 - Service Information Repair information on self-locking threaded connections at the axle mounts (si35.00-p-0005a)
   35.00 - Service Information Threaded connections of rubber bushings and control arms (si35.00-p-0001a)
   35.00 - Technical modifications Passenger cars Rear axle (bt35.00-z-9999az)
   35.00 - Technical modifications Rear-axle center piece Rear-axle center piece with 210 mm dia. crown wheel (reinforced) Model 129, 140 (ra3500hmvta00x)
   35.00 - Test and adjustment values Passenger cars Rear axle (be35.00-z-9999az)
   35.00 - Tightening torques Passenger cars Rear axle - - ba35.00-z-9999az)
   35.10 - 3501 - Oil change in the rear axle Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3501pkw0000x)
   35.10 - 3510 - Rear axle, Checking and correction of oil level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh3510pkw0000x)
   35.10 - Remove_install complete rear axle (ar35.10-p-0010c)
   35.10 - Remove_install front and rear rubber bushings in rear axle mount (ar35.10-p-0040c)
   35.10 - Removing, installing rear rubber mount for center assembly mount in rear axle carrier (ar35.10-p-0050c)
   35.20 - Remove_install camber strut (ar35.20-p-0110b)
   35.20 - Remove_install radius rod (ar35.20-p-0111b)
   35.20 - Remove_install rear axle shaft flange and angular ball bearing (ar35.20-p-0130b)
   35.20 - Remove_install spring control arm, replace rubber bushing (ar35.20-p-0114b)
   35.20 - Remove_install supporting joint at wheel carrier (wheel carrier installed) (ar35.20-p-0116b)
   35.20 - Remove_install thrust arm (ar35.20-p-0113b)
   35.20 - Remove_install track rod and replacement of rubber mount (ar35.20-p-0112b)
   35.20 - Remove_install wheel carrier (ar35.20-p-0115b)
   35.30 - Remove_install inside CV joint or rubber boots on rear axle shaft (ar35.30-p-0660a)
   35.30 - Remove_install rear axle shaft (ar35.30-p-0620a)
   35.31 - 0500 - Distinguishing features_installation survey for rear axle center piece Rear axle center piece with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0500x)
   35.31 - 0550 - Rear axle center piece with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0550x)
   35.31 - 0560 - Repair of the differential Standard differential with 210 mm dia. crown wheel (reinforced) Models 129, 140 (ra3500hmv0560x)
   35.31 - Disassembling and assembling differential (ar35.31-p-0560a)
   35.31 - Install new radial sealing ring at drive pinion gear (with differential installed) (ar35.31-p-0530c)
   35.31 - Remove_install differential (ar35.31-p-0520c)
   35.31 - Replace radial sealing ring on connecting flange of rear axle shaft (ar35.31-p-0540c)
   35.31 - Service Information Change of oil filler screw and oil drain screw on rear axle center assembly (si35.31-p-0003a)
   35.31 - Service Information Rear axle center assembly (si35.31-p-0001a)
   35.31 - Service Information Rear axle gear (si35.31-p-0002a)
   35.41 - Bleeding ASD hydraulic system (ar35.41-p-0519c)
   35.41 - Dismantling and assembling ASD differential (ar35.41-p-0560c)
40_Wheels, Chassis Alignment Check
   40.00 - 000 588 00 83 00 Tire mounting device (ws40.00-p-0006b)
   40.00 - 000 588 01 19 00 Tester (ws40.00-p-0005b)
   40.00 - 000 588 05 19 00 Inclinometer (ws40.00-p-0007b)
   40.00 - 000 588 12 21 00 Balancing machine (ws40.00-p-0024b)
   40.00 - 000 588 13 21 00 Wheel alignment system (ws40.00-p-0013b)
   40.00 - 000 589 18 31 00 Brake pedal winch (ws40.00-p-0001b)
   40.00 - 000 589 82 63 00 Mylon cord (ws40.00-p-0002b)
   40.00 - 115 589 18 23 00 Locating device (ws40.00-p-0008b)
   40.00 - 115 589 19 23 00 Securing fixture (ws40.00-p-0009b)
   40.00 - 124 589 01 19 00 Telescopic measuring rod (ws40.00-p-0014c)
   40.00 - 124 589 01 31 00 Quick clamping device (ws40.00-p-0015b)
   40.00 - 124 589 02 19 00 Telescopic measuring rod (ws40.00-p-0016c)
   40.00 - 124 589 04 21 00 Gage pins (ws40.00-p-0017c)
   40.00 - 124 589 08 63 00 Connecting pieces (ws40.00-p-0018c)
   40.00 - 124 589 17 63 00 Assembly tool (ws40.00-p-0021b)
   40.00 - 124 589 20 63 00 Chain (ws40.00-p-0022b)
   40.00 - 126 589 04 09 00 Socket wrench bit (ws40.00-p-0023a)
   40.00 - 129 589 00 59 00 Removal tool (ws40.00-p-0101b)
   40.00 - 129 589 01 21 00 Retainer device (ws40.00-p-0025b)
   40.00 - 140 589 09 63 00 Measuring fixture set (ws40.00-p-0029c)
   40.00 - 164 589 04 63 00 Retaining tube (ws40.00-p-0071c)
   40.00 - 168 589 07 63 00 Measuring set (ws40.00-p-0046b)
   40.00 - 170 589 00 63 00 Mount (ws40.00-p-0043c)
   40.00 - 201 589 02 21 00 Measuring device (ws40.00-p-0033b)
   40.00 - 201 589 11 31 00 Pulling device (ws40.00-p-0036b)
   40.00 - 201 589 12 21 00 Level carrier (ws40.00-p-0037c)
   40.00 - 211 589 00 31 00 Adapter for brake pedal winch (ws40.00-p-0047b)
   40.00 - 211 589 06 23 00 Brake pad test gauge (ws40.00-p-0066a)
   40.00 - 230 589 01 09 00 Socket wrench (ws40.00-p-0049b)
   40.00 - Forms Passenger cars Wheels, chassis alignment check - - of40.00-z-3999az)
   40.00 - General information on vehicle level measurement (ar40.00-p-0202a)
   40.00 - Service Information Permissible valve caps for vehicles with tire pressure monitoring system (si40.00-p-0003a)
   40.00 - Service Information Use of nitrogen as a tire-filling gas (si40.00-p-0004a)
   40.00 - Technical modifications Passenger cars Wheels, chassis alignment check (bt40.00-z-9999az)
   40.00 - Test and adjustment values Passenger cars Wheels, chassis alignment check - - be40.00-z-9999az)
   40.00 - Tightening torques Passenger cars Wheels, chassis alignment check - - ba40.00-z-9999az)
   40.10 - 40.00 - AMG Accessories Information for the Mercedes-Benz Organization specify wheel_tire combinations Model 124, 126, 129, 140, 170, 201, 202, 210 (ea4000pez0000x)
   40.10 - 40.06 - AMG Accessories Conversion to 17-inch wheels (multi-piece disk wheels) Model 129 (ea4006pez0000x)
   40.10 - 40.22 - AMG Accessories Conversion to 17-inch tyres (multi-piece disk wheel) Model 129 (ea4022pez0000x)
   40.10 - 40.38 - AMG Accessories Conversion to one piece wheel, Model 129 Front axle 8 J x 18 H 2 ET 31, Rear axle 9 J x 18 H 2 ET 35 (ea4038pez0000x)
   40.10 - 40.39 - AMG Accessories Conversion to 245_40 ZR 18 tyres and 8 J x 18 H 2 ET 31 disk wheel Model 129 (ea4039pez0000x)
   40.10 - 4050 - Removal_Mounting of the wheels, Rotating if required Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4050pkw0000x)
   40.10 - 4051 - Checking tire for condition and damage, Measurement of tread depth Model 107 from 8_85, 123, 124, 129, 140 up to 6_93, 126 from 9_85, 201 from 1_85 (wh4051pkw0000x)
   40.10 - 4060 - Correction of the tire pressure Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4060pkw0000x)
   40.10 - 4070 - Retightening the wheel bolts Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4070pkw0000x)
   40.10 - Balancing wheels (ar40.10-p-1040a)
   40.10 - Checking tires for lateral and radial runout (ar40.10-p-1025a)
   40.10 - Check tires for damage and crack formations (ap40.10-p-4051z)
   40.10 - General overview of approved wheel_tire combinations in as-built configuration (gf40.10-p-0804a)
   40.10 - Overview of tire checks for damage and crack formation (ap40.10-p-4048u)
   40.10 - Perform smooth operation optimization (ar40.10-p-3201a)
   40.10 - Remove_install wheels, rotate if necessary (ap40.10-p-4050z)
   40.10 - Replace tires (ar40.10-p-1030a)
   40.10 - Retrofit AMG disk wheels (composite) (az40.10-p-0001a)
   40.10 - Retrofit AMG disk wheels (single-part) (az40.10-p-0002e)
   40.10 - Service Information bulletin TIREFIT tire sealant (si40.10-p-0020a)
   40.10 - Service Information Clean light alloy disk wheel (si40.10-p-0022a)
   40.10 - Service Information Cosmetic processing of light alloy wheels (si40.10-p-0026a)
   40.10 - Service information It is not permissible to use lead balancing weights (si40.10-p-0015a)
   40.10 - Service information Radial crack in light alloy disk wheel (si40.10-p-0023a)
   40.10 - Service information Wheel bolts (si40.10-p-0005a)
   40.20 - Adjusting ball point position (ar40.20-p-0321a)
   40.20 - Attaching Mercedes-Benz quick-clamping devices (ar40.20-p-0230a)
   40.20 - Chassis alignment test sheet Passenger cars (wb6516lit7434z)
   40.20 - Check and adjust camber and caster at front axle (ar40.20-p-0322a)
   40.20 - Check and adjust front axle toe-in (ar40.20-p-0323a)
   40.20 - Check and adjust toe on rear axle (ar40.20-p-0332a)
   40.20 - Check ball point position (ar40.20-p-0320a)
   40.20 - Checking rear axle camber (ar40.20-p-0331a)
   40.20 - Checking toe-out on turns (ar40.20-p-0325a)
   40.20 - Checking vehicle level at front and rear axles (ar40.20-p-0300a)
   40.20 - Checking vehicle level at front and rear axles (ar40.20-p-0300d)
   40.20 - Checking vehicle level at front and rear axles (ar40.20-p-0300e)
   40.20 - General information on wheel alignment (ar40.20-p-0201a)
   40.20 - Perform chassis alignment check (ar40.20-p-0200a)
   40.20 - Service Information for chassis alignment system (si40.20-p-0002a)
   40.20 - Service Information Operation texts and work units for chassis alignment (si40.20-p-0005a)
   40.30 - Carry out distance and comparison measurements on front and rear axles (ar40.30-p-0402a)
   40.30 - Check accidents vehicles and vehicles in which accident damage is suspected (ar40.30-p-0400a)
   40.30 - Checking alignment of spring control arm, camber strut, strut rod, thrust arm and tie rod on rear axle (ar40.30-p-0420a)
   40.30 - Measuring lower wishbone (when removed) (ar40.30-p-0452a)
   40.30 - Measuring rear axle carrier (when removed) (ar40.30-p-0410a)
   40.30 - Measuring steering knuckle (ar40.30-p-0451a)
   40.30 - Measuring wheel carrier (when removed) (ar40.30-p-0425a)
   40.30 - Preparations for dimensional and comparative measurement (ar40.30-p-0401a)
41_Propeller Shaft
   41.00 - 116 589 09 43 00 Removal and installation tool (ws41.00-p-0001c)
   41.00 - 126 589 00 01 00 Open-end wrench (ws41.00-p-0002b)
   41.00 - 126 589 03 15 00 Drift (ws41.00-p-0003c)
   41.00 - 129 589 00 34 00 Puller arms (ws41.00-p-0004c)
   41.00 - Capacities Passenger cars Propeller shaft (bf41.00-z-9999az)
   41.00 - Forms Passenger cars Propeller shaft (of41.00-z-3999az)
   41.00 - Technical modifications Passenger cars Propeller shaft (bt41.00-z-9999az)
   41.00 - Test and adjustment values Passenger cars Propeller shaft - - be41.00-z-9999az)
   41.00 - Tightening torques Passenger cars Propeller shaft - - ba41.00-z-9999az)
   41.10 - 4152 - Checking the propeller shaft companion plates for wear Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4152pkw0000x)
   41.10 - Check propeller shaft flexible couplings for signs of damage and deformation (ap41.10-p-4152z)
   41.10 - Measure propeller shaft alignment using mechanical propeller shaft articulated angle measuring device (ar41.10-p-0085a)
   41.10 - Removal and installation of propeller shaft intermediate bearing and replacement of grooved ball bearing (ar41.10-p-0100da)
   41.10 - Remove_install propeller shaft (ar41.10-p-0050a)
   41.10 - Replacing centering sleeve (ar41.10-p-0200da)
42_Brakes - Hydraulic & Mechanical Systems
   42.00 - 000 588 05 21 00 Roller brake test stand (ws42.00-p-0006b)
   42.00 - 000 588 07 21 00 Test equipment (ws42.00-p-0014b)
   42.00 - 000 589 26 68 00 Brake caliper brush (ws42.00-p-0002a)
   42.00 - 000 589 35 23 00 Inspection gauge (ws42.00-p-0004c)
   42.00 - 000 589 49 37 00 Pliers (ws42.00-n-0005c)
   42.00 - 000 589 50 37 00 Pliers (ws42.00-n-0007c)
   42.00 - 000 589 52 43 00 Resetting device (ws42.00-p-0009a)
   42.00 - 0009 - Notes on accident prevention on the brake roller dynamometers T2 model 668-670 with air-pressure power braking (ra4302dfk0009x)
   42.00 - 0702 - Important information on repairs Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240702x)
   42.00 - 0810 - Notes for towing, or test and repair work, and handling ASR components on vehicles following an accident Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400810x)
   42.00 - 112 589 09 61 00 Installation tool (ws42.00-n-0012b)
   42.00 - 116 589 01 62 00 Removal and installation tool (ws42.00-p-0017b)
   42.00 - 123 589 13 33 00 Lever (ws42.00-p-0018a)
   42.00 - 124 589 19 21 00 Pulse counter (ws42.00-p-0021b)
   42.00 - 126 589 09 21 00 Test adapter for ABS (ws42.00-n-0023b)
   42.00 - 126 589 15 63 00 Protective adapter (ws42.00-p-0024b)
   42.00 - 129 589 11 63 00 Snap-release tool (ws42.00-n-0027b)
   42.00 - 140 589 00 19 00 Caliper gauge (ws42.00-p-0028a)
   42.00 - 140 589 03 09 00 Socket wrench (ws42.00-p-0032b)
   42.00 - 140 589 04 63 00 Contacting module 4 (ws42.00-p-0033b)
   42.00 - 140 589 14 63 00 Adapter (ws42.00-p-0034b)
   42.00 - 140 589 45 63 00 -pin test cable (ws42.00-p-0038b)
   42.00 - 140 589 50 63 00 Test cable 16-pin (ws42.00-p-0039b)
   42.00 - 168 589 08 63 00 Test connection (ws42.00-p-0044b)
   42.00 - 201 589 13 21 00 Vacuum tester (ws42.00-p-0036b)
   42.00 - 220 589 01 31 00 Guard plate (ws42.00-p-0042b)
   42.00 - 352 589 02 37 00 Pliers (ws42.00-n-3022c)
   42.00 - 4210 - Brake system, Checking the fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4210pkw0000x)
   42.00 - 4290 - Brake test on the test bench or test drive Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4290pkw0000x)
   42.00 - 601 589 07 63 00 Wedge (ws42.00-n-3005b)
   42.00 - Brake test (ap42.00-p-4290ba)
   42.00 - Capacities Passenger cars Brakes - hydraulic and mechanical systems (bf42.00-z-9999az)
   42.00 - Forms Passenger cars Brakes - hydraulic and mechanical systems (of42.00-z-3999az)
   42.00 - Locate noises from the brake (ar42.00-p-2000a)
   42.00 - Replace brake fluid (ap42.00-p-4280a)
   42.00 - Replace brake fluid (ap42.00-p-4280bb)
   42.00 - Replace brake fluid (ap42.00-p-4280bc)
   42.00 - Technical modifications Brakes ASR Models 124, 126, 129, 140, 201.02 with ABS (ra4200140ta00x)
   42.00 - Technical modifications Brakes ASR Models 124, 126, 129, 140, 201, 202 (ra4200202ta00x)
   42.00 - Technical modifications Passenger cars Brakes - hydraulic and mechanical systems (bt42.00-z-9999az)
   42.00 - Test and adjustment values Passenger cars Brakes - hydraulic and mechanical systems - - be42.00-z-9999az)
   42.00 - Tightening torques Passenger cars Brakes - hydraulic and mechanical systems - - ba42.00-z-9999az)
   42.00 - Traction systems (ABS, ASR, ETS) and SPS diagnosis, contents (ad42.00-p-1000az)
   42.10 - Bleed brake system (ar42.10-p-0010a)
   42.10 - Brake system - inspect fluid level (ap42.10-p-4210z)
   42.10 - Check brake lining thickness (ap42.10-p-4253am)
   42.10 - Inspect condition of brake disks (ap42.10-p-4258am)
   42.10 - Remove_check_install front axle brake pads (ar42.10-p-1600dm)
   42.10 - Remove_install brake disc (ar42.10-p-0220a)
   42.10 - Remove_install front axle brake caliper (ar42.10-p-0070am)
   42.10 - Remove_install rear axle brake caliper (ar42.10-p-0080am)
   42.10 - Remove_install stepped tandem master brake cylinder (ar42.10-p-0310a)
   42.10 - Removing and installing mechanical stop lamp switch (ar42.10-p-0040a)
   42.10 - Removing, checking and installing rear axle brake pads (ar42.10-p-1700am)
   42.10 - Repair fixed brake caliper of rear axle (ar42.10-p-0151a)
   42.10 - Repairing fixed caliper on front axle (ar42.10-p-0150a)
   42.10 - Repairing stepped tandem brake master cylinder (ar42.10-p-0315a)
   42.10 - Replace brake hoses (ar42.10-p-0013a)
   42.10 - Service Information Brake caliper with Mercedes-Benz brand cover (si42.10-p-0025a)
   42.10 - Service Information Brake hose (si42.10-p-0003b)
   42.10 - Service Information Brake lining installation instructions (si42.10-p-0002a)
   42.10 - Test brake system with pressure tester for leaks (ar42.10-p-0015a)
   42.20 - 4256 - Checking the parking brake control cables for easy operation Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4256pkw0000x)
   42.20 - 4261 - Readjustment of the parking brake (once at 20,000 km) Models 107 from 08_85; 124, 129 to 06_93; 126 from 09_85; 201 from 01_85 (wh4261pkw0002x)
   42.20 - Adjust parking brake (ap42.20-p-4261ba)
   42.20 - Adjust parking brake (ar42.20-p-0540a)
   42.20 - Check operation of parking brake cables (ap42.20-p-4256z)
   42.20 - Remove_install brake shoes of parking brake (ar42.20-p-0530a)
   42.20 - Remove_install front brake cable (ar42.20-p-0520a)
   42.20 - Remove_install parking brake pedal assembly (ar42.20-p-0510a)
   42.20 - Removing and installing rear brake control cable (ar42.20-p-0525a)
   42.30 - 0700 - A. Design and function of anti-lock braking system (A thru C) Models 124, 129, 140, 201, Model 202 up to 08_95 (ra4200124a700x)
   42.30 - 0700 - B. Design and function of anti-lock braking system (D thru F) Models 124, 129, 140, 201, Model 202 up to 08_95 (ra4200124b700x)
   42.30 - 0705 - Removal and installation of the hydraulic unit (A7), ABS Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240705x)
   42.30 - 0708 - Removal and installation of ABS control unit A. Model 124 (except 124.034), 129.060_061_066, 201, Model 202 up to 08_95 B. Model 124.034, 129.058_063, 140 (ra42001240708x)
   42.30 - 0710 - Removal and installation of relays for solenoid valve charge_return pump Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240710x)
   42.30 - 0712 - Removal and installation of the front wheel speed sensors, ABS A. Model 124, 201, B. Model 129, 140, C. Model 202 up to 08_95 (ra42001240712x)
   42.30 - 0714 - Removal and installation of the rear wheel speed sensor ABS A. Model 124, 201, B. Model 129, 140, C. Model 202 up to 08_95 (ra42001240714x)
   42.30 - 0725 - Function and test of 5 - 7 and 9 pin relays Overvoltage protection from 09_85 Models 124, 129, 140, 201, 202 up to 08_95 (ra42001240725x)
   42.30 - 0730 - Test instructions for the ABS tester with fault memory ABS Tester Part no.124 589 22 21 00 Models 124, 129, 140, 201, Model 202 up to 08_95 (ra42001240730x)
   42.30 - 6.1 - Anti-lock braking system (ABS) 11 - Diagnosis, Troubleshooting chart Model 129 without module box (dh0601pf20011x)
   42.30 - 6.1 - Anti-lock braking system (ABS) 21 - Test programme - electrics, Location of components Model 129 without module box (dh0601pf20021x)
   42.30 - 6.1 - Anti-lock braking system (ABS) 22 - Test programme - electrical, Conditions for test Model 129 without module box (dh0601pf20022x)
   42.30 - 6.1 - Anti-lock braking system (ABS) 23 - Test programme - electrics, Testing Model 129 without module box (dh0601pf20023x)
   42.30 - 6.2 - Anti-lock braking system (ABS) 11 - Diagnosis - fault memory Models 124.034 and 129 with module box, Model 140 (dh0602pf20011x)
   42.30 - 6.2 - Anti-lock braking system (ABS) 12 - Diagnosis, Troubleshooting chart Models 124.034 and 129 with module box, Model 140 (dh0602pf20012x)
   42.30 - 6.2 - Anti-lock braking system (ABS) 21 - Test programme - electrics, Location of components Models 124.034 and 129 with module box, Model 140 (dh0602pf20021x)
   42.30 - 6.2 - Anti-lock braking system (ABS) 22 - Test programme - electrics, Conditions for test Models 124.034 and 129 with module box, Model 140 (dh0602pf20022x)
   42.30 - 6.2 - Anti-lock braking system (ABS) 23 - Test programme - electrics, Testing Models 124.034 and 129 with module box, Model 140 (dh0602pf20023x)
   42.30 - Remove_install left front or right rpm sensor (ar42.30-p-0712a)
   42.30 - Remove_install pulse ring (ar42.30-p-0715a)
   42.30 - Service Information Notes for handling multipole rings (si42.30-p-0004a)
   42.31 - Brake Assist (BAS), contents, function description (gf42.31-p-0999a)
   42.31 - Brake Assist (BAS) diagnosis, contents (ad42.31-p-1000az)
   42.31 - Checking brake assist system (BAS) (sm42.31-p-0001b)
   42.31 - Overview of Braking Assistant (BAS) system components - Location_Function_Design_function (gf42.31-p-9999a)
   42.31 - Removing and installing BAS control module (ar42.31-p-6001a)
   42.31 - Removing and installing BAS diaphragm travel sensor (ar42.31-p-6002a)
   42.31 - Testing Brake Assist System (BAS) (sm42.31-p-0001a)
   42.35 - Contents, function description, electronic traction system (ETS) (gf42.35-p-0999a)
   42.35 - Electronic traction system (ETS) diagnosis contents (ad42.35-p-1001az)
   42.40 - 0816 - Removal and installation of the ASR hydraulic unit (A7_3) Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400816x)
   42.40 - 0818 - Removal and installation of the ASR pressurizing pump (M15) Brakes ASR II Models 124, 126, 129, 201, ASR III Model 140 (ra42001400818x)
   42.40 - 0819 - Removal and installation of the accumulator - ASR II, III A. Models 124, 126, 201, B. Model 129, C. Model 140 (ra42001400819x)
   42.40 - 0820 - Removal and installation of left or right rear axle speed sensors (L6_3, L6_4) - Brakes ASR II, III Models 124, 126, 129, 201, 140 (ra42001400820x)
   42.40 - 5.1 - Acceleration skid control (ASR) 11 - Diagnosis, Function check Model 129 without module box (dh0501pf20011x)
   42.40 - 5.1 - Acceleration skid control (ASR) 12 - Diagnosis, Troubleshooting chart Model 129 without module box (dh0501pf20012x)
   42.40 - 5.1 - Acceleration skid control (ASR) 21 - Test programme - electrics, Location of components Model 129 without module box (dh0501pf20021x)
   42.40 - 5.1 - Acceleration skid control (ASR) 22 - Test programme - electrics, Conditions for test Model 129 without module box (dh0501pf20022x)
   42.40 - 5.1 - Acceleration skid control (ASR) 23 - Test programme - electrics, Testing Model 129 without module box (dh0501pf20023x)
   42.40 - 5.1 - Acceleration skid control (ASR) 31 - Test programme - hydraulics, Location of components Model 129 without module box (dh0501pf20031x)
   42.40 - 5.1 - Acceleration skid control (ASR) 32 - Test programme - hydraulics, Conditions for test Model 129 without module box (dh0501pf20032x)
   42.40 - 5.1 - Acceleration skid control (ASR) 33 - Test programme - hydraulics, Testing Model 129 without module box (dh0501pf20033x)
   42.40 - 5.2 - Acceleration skid control (ASR) 11 - Diagnosis - function check, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20011x)
   42.40 - 5.2 - Acceleration skid control (ASR) 12 - Diagnosis - fault memory, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20012x)
   42.40 - 5.2 - Acceleration skid control (ASR) 13 - Diagnosis - troubleshooting chart, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20013x)
   42.40 - 5.2 - Acceleration skid control (ASR) 23 - Test programme - electrical Testing, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20023x)
   42.40 - 5.2 - Acceleration skid control (ASR) 33 - Test programme - hydraulical, Testing, Model 124 with module box, Model 129 with module box up to 05_94, Model 140 up to 05_94 (dh0502pf20033x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 11 - Diagnosis - Function check (ASR only) Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00011x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 12 - Diagnosis - Fault memory Model 129, 140 as of 06_94 (dh0901pf00012x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 13 - Diagnosis - Troubleshooting chart Model 129, 140 as of 06_94 (dh0901pf00013x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 21 - Test program - Electrical systems Arrangement of components Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00021x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 22 - Test program - Electrical systems Prerequisites for testing Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00022x)
   42.40 - 9.1 - Traction systems (ASR,ETS) and SPS 23 - Test program - Electrics, Testing Model 129, 140 as of 06_94 up to 08_95 (dh0901pf00023x)
   42.40 - Acceleration slip regulation (ASR) diagnosis contents (ad42.40-p-1000az)
   42.40 - Contents, function description, acceleration slip regulation (ASR V) (gf42.40-p-0999a)
   42.40 - Remove_install ETS_ASR_ESP hydraulic unit (ar42.40-p-0816a)
   42.40 - Remove_install left or right rear axle speed sensor (ar42.40-p-0820a)
   42.45 - Electronic stability program (ESP) and SPS diagnosis contents (ad42.45-p-1001az)
   42.45 - Removing and installing ESP charge plunger unit (ar42.45-p-0819a)
   42.45 - Removing and installing ESP charging pump (ar42.45-p-0818a)
   42.45 - Table of contents Functional description, Electronic Stability Program (ESP) (gf42.45-p-0999a)
43_Brakes - Pheumatic System & Auxiliary Brakes
   43.00 - Test and adjustment values Passenger cars Brakes - pneumatic system and auxiliary brakes (be43.00-z-9999az)
   43.00 - Tightening torques Passenger cars Brakes - pneumatic system and auxiliary brakes - - ba43.00-z-9999az)
   43.10 - Checking brake booster (ar43.10-p-0325a)
   43.10 - Checking check valve (ar43.10-p-0023a)
   43.10 - Removing and installing brake booster (ar43.10-p-0350a)
46_Steering
   46.00 - 0002 - Overview of the power steering pumps (LHP)_tandem pumps (TANP) Steering gear 765.9 (ra46097650002x)
   46.00 - 000 589 69 03 00 Box wrench bit (ws46.00-p-0002b)
   46.00 - 000 589 70 03 00 Box wrench bit (ws46.00-p-0003b)
   46.00 - 0005 - General Function description Steering Models 124, 129, 140, 201, 202 (ra4600fbl0005x)
   46.00 - 0006 - Functional survey Models 124, 129, 140, 201, 202 (ra4600fbl0006x)
   46.00 - 0020 - Design and function of the electrical components in PARAMETER STEERING A.-F. Design and function, G. Instructions for test and repair work Steering 760.7_765.9 (ra4600fbl0020x)
   46.00 - 0060 - Design and function of the tandem pump A. Tandem pump designation, B. Drive, C. Oil delivery, D. Pressure limits Models 124, 129, 140, 201, 202 (ra4600fbl0060x)
   46.00 - 115 589 08 61 00 Installation tool (ws46.00-p-0006b)
   46.00 - 123 589 02 21 00 Torque wrench (ws46.00-p-0021a)
   46.00 - 124 589 06 21 00 Tester (ws46.00-n-0030b)
   46.00 - 124 589 19 63 00 Connection fittings (ws46.00-p-0032b)
   46.00 - 126 589 00 10 00 Screwdriver bit (ws46.00-p-0033b)
   46.00 - 126 589 13 63 00 Mounting fixture (ws46.00-p-0035a)
   46.00 - 129 589 00 33 00 Puller (ws46.00-p-0037b)
   46.00 - 129 589 02 07 00 Pin wrench (ws46.00-p-0038c)
   46.00 - 129 589 07 21 00 Friction torque meter (ws46.00-p-0086b)
   46.00 - 129 589 10 63 00 Thrust piece (ws46.00-p-0039b)
   46.00 - 140 589 01 15 00 Drift (ws46.00-p-0043c)
   46.00 - 140 589 17 63 00 Connection fitting (ws46.00-p-0052b)
   46.00 - 201 589 01 33 00 Puller (ws46.00-p-0053b)
   46.00 - 202 589 00 14 00 Shell (ws46.00-p-0062b)
   46.00 - 210 589 00 07 00 Claw-type wrench for rosette on ignition_starter switch (ws46.00-p-0065b)
   46.00 - 210 589 09 63 00 Connection fitting (ws46.00-p-0067b)
   46.00 - 215 589 01 63 00 Connection fitting (ws46.00-p-0079b)
   46.00 - Capacities Passenger cars Steering (bf46.00-z-9999az)
   46.00 - Checking and adjusting oil level in power steering (ap46.00-p-4611ba)
   46.00 - Forms Passenger cars Steering (of46.00-z-3999az)
   46.00 - Inspect play of track rod and drag link joints, inspect rubber boots (ap46.00-p-4653ba)
   46.00 - Locate noises from the steering (ar46.00-p-2000a)
   46.00 - Service Information Redocumentation of steering gear in VeDoc (si46.00-p-0001a)
   46.00 - Technical modifications Passenger cars Steering (bt46.00-z-9999az)
   46.00 - Technical modifications Power steering pumps Steering gear 765.9 with power steering pump in Models 124, 129, 140, 201, 202 (ra4609765ta00x)
   46.00 - Test and adjustment values Passenger cars Steering (be46.00-z-9999az)
   46.00 - Tightening torques Passenger cars Steering - - ba46.00-z-9999az)
   46.10 - 0003 - Steering wheel survey Models 124, 129, 140, 201, 202 (ra4600fbl0003x)
   46.10 - 0233 - Disassembly and assembly of the pitman arm shaft_bearing cover Steering gear 765.9 (ra46097650233x)
   46.10 - 0615 - Function of the electrically adjustable jacket tube Function Description Steering (ra4600fbl0615x)
   46.10 - 0616 - Function of the manually adjustable jacket tube Function Description Steering (ra4600fbl0616x)
   46.10 - 0617 - Function of contact spiral between steering column tube_steering wheel (ra4600fbl0617x)
   46.10 - Disassemble_assemble electrically adjustable steering column tube (ar46.10-p-0600a)
   46.10 - Dismantling and assembling rigid jacket tube (ar46.10-p-0500a)
   46.10 - Remove_install clock spring contact (ar46.10-p-0200a)
   46.10 - Removing and installing jacket tube (ar46.10-p-0400a)
   46.10 - Removing and installing lock cylinder (ar46.10-p-0800a)
   46.10 - Removing and installing lock cylinder (ar46.10-p-0800c)
   46.10 - Removing and installing steering angle sensor (ar46.10-p-0300a)
   46.10 - Removing and installing steering angle sensor (ar46.10-p-0300b)
   46.10 - Removing and installing steering lock (ar46.10-p-0900a)
   46.10 - Removing and installing steering wheel (ar46.10-p-0100a)
   46.10 - Removing and installing steering wheel (ar46.10-p-0100b)
   46.10 - Service Information Warranty and goodwill policies for steering wheels (si46.10-p-0006a)
   46.14 - 4650 - Checking the play in the steering Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4650pkw0000x)
   46.14 - 4671 - Retightening mounting bolts for steering Model 107 from 8_85; 123; 124, 129 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4671pkw0000x)
   46.20 - 0001 - Overview of the steering gears Steering gear 765.9 (ra46097650001x)
   46.20 - 0001 - Steering gear survey Steering gear 760.700, 765.9 (ra4600fbl0001x)
   46.20 - 0120 - Check and adjust the friction torque of the steering gear Steering gear 765.9 (ra46097650120x)
   46.20 - 0140 - Replacement of the steering gear when performing repairs to a vehicle involved in an accident Steering gear 765.9 (ra46097650140x)
   46.20 - 0238 - Removal, installation and checking of the control valve A. Conventional control valve, B. Control valve on parameter steering Steering gear 765.9 (ra46097650238x)
   46.20 - Adjusting steering gear in vehicle (ar46.20-p-0100a)
   46.20 - Remove_install steering gear (ar46.20-p-0500b)
   46.20 - Replacing sealing ring in lower steering gear cover (ar46.20-p-0200a)
   46.20 - Retightening steering mounting bolts (ap46.20-p-4671ba)
   46.25 - Service Information Approved oils for hydraulic steering systems (si46.25-p-0004a)
   46.25 - Service Information Processing of steering system complaints (si46.25-p-0003a)
   46.30 - 0002 - Overview power steering_tandem pump (ra4600fbl0002x)
   46.30 - 0715 - Filling and bleeding the power steering pump_tandem pump Steering gear 765.9 (ra46097650715x)
   46.30 - 0730 - Disassembly and assembly of the power steering pump_tandem pump A. Power steering pump, B. Tandem pump (Models 62, 162) Steering gear 765.9 (ra46a97650730x)
   46.30 - 0730 - Disassembly and assembly of the tandem pump C. Models 67, 167 Steering gear 765.9 (ra46c97650730x)
   46.30 - 4611 - Checking and correcting the power steering fluid level Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4611pkw0000x)
   46.30 - Checking oil pressure of power steering pump (ar46.30-p-0100a)
   46.30 - Fill power steering pump and bleed (ar46.30-p-0010a)
   46.30 - Remove_install power steering pump (ar46.30-p-0500a)
   46.40 - Remove_install drag link (ar46.40-p-0100a)
   46.40 - Remove_install steering idler arm, replacing plain rubber mount (ar46.40-p-0300a)
   46.40 - Remove_install track rod (ar46.40-p-0200a)
   46.50 - 0231 - Removal and installation of the parameter steering (PML) P-valve (Y10) Models 124, 129, 140, 201, 202 with Steering gear 765.9 (ra46097650231x)
47_Fuel System
   47.00 - 000 588 03 21 00 Gas detector (ws47.00-p-0019b)
   47.00 - 0005 - Function description Fuel cooler LH-Injection System (ra4700flh0005x)
   47.00 - 0020 - Function description Fuel gauge sensor A. Model 124, B. Models 129, 140 LH-Injection System (ra4700flh0020x)
   47.00 - 210 589 01 37 00 Pliers (ws47.00-p-0010b)
   47.00 - Capacities Passenger cars Fuel system - - bf47.00-z-9999az)
   47.00 - Forms Passenger cars Fuel system (of47.00-z-3999az)
   47.00 - Service information Return delivery of fuel-guiding parts (si47.00-p-0001a)
   47.00 - Service Information Usability of E10 fuel (si47.00-p-0002a)
   47.00 - Technical modifications Passenger cars Fuel system (bt47.00-z-9999az)
   47.00 - Test and adjustment values Passenger cars Fuel system (be47.00-z-9999az)
   47.00 - Tightening torques Passenger cars Fuel system - - ba47.00-z-9999az)
   47.10 - 0010 - Function description Fuel tank with splash bowl LH-Injection System (ra4700flh0010x)
   47.10 - Checking the nozzle gasket in the tank filler neck for damage and replacing it (ap47.10-p-4751a)
   47.10 - Draining and filling fuel tank (ar47.10-p-4001f)
   47.10 - Remove_install fuel level sensor (ar47.10-p-7000fa)
   47.10 - Remove_install fuel tank (ar47.10-p-4100d)
   47.10 - Remove_install fuel tank (ar47.10-p-4100fa)
   47.10 - Removing and installing guide funnel (ar47.10-p-7571d)
   47.10 - Service information on fuel sensor (si47.10-p-0001a)
   47.10 - Service Information Procedure for fuel tank leaks (si47.10-p-0007a)
   47.20 - 0780 - Replacement of the fuel filter Engine 104, 119, 120 LH-injection Models 124, 129, 140 to 6_93 (wh0780pkw0005x)
   47.20 - Model and components installation survey fuel pumps as-built configuration (gf47.20-p-0801a)
   47.20 - Removing and installing check valve for fuel pump (ar47.20-p-5820f)
   47.20 - Removing and installing fuel pumps (ar47.20-p-5713f)
   47.20 - Replacing fuel filter (ap47.20-p-0780da)
   47.30 - 0200 - Function description Fuel evaporation control system A. Function diagram, B. Function LH-Injection System (ra4700flh0200x)
   47.30 - Removing and installing activated charcoal canister (ar47.30-p-8212d)
   47.30 - Removing and installing activated charcoal canister (ar47.30-p-8212fa)
   47.30 - Removing and installing activated charcoal filter (ar47.30-p-8212b)
49_Exhaust System
   49.00 - 0010 - Function description Exhaust system A. Engine 104, B. Engine 119, C. Engine 120 LH-Injection System (ra4900flh0010x)
   49.00 - 0025 - Function description General notes regarding vehicles with CAT. LH-Injection System (ra4900flh0025x)
   49.00 - 4971 - Retightening the exhaust system screw connections Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh4971pkw0000x)
   49.00 - Certificates Passenger cars Exhaust system (of49.00-z-1999az)
   49.00 - Technical modifications Passenger cars Exhaust system (bt49.00-z-9999az)
   49.00 - Tightening torques Passenger cars Exhaust system - - ba49.00-z-9999az)
   49.10 - 0005 - Function description Catalytic converter LH-Injection System (ra4900flh0005x)
   49.10 - 49.05 - AMG Accessories Replacement of rear muffler Model 129 (ea4905pez0000x)
   49.10 - Instructions for treatment of exhaust pipes, catalytic converters, mufflers as toxic waste (os49.10-n-1000a)
   49.10 - Remove_install catalytic converter and front exhaust system (ar49.10-p-5531e)
   49.10 - Remove_install exhaust system complete (ar49.10-p-7000e)
   49.10 - Remove _ install exhaust system from flange connection (ar49.10-p-7280fa)
   49.10 - Replacing center and rear muffler (ar49.10-p-4940f)
   49.10 - Service Information Care of tail pipe finishers (si49.10-p-0008a)
   49.10 - Service Information Recycling of diesel particulate filters (si49.10-p-0007a)
54_Electrical System, Equipment & Instruments
   54.00 - 000 586 00 99 00 Battery diagnostic unit (ws54.00-p-0033c)
   54.00 - 000 588 00 19 00 Insulation measuring unit (ws54.00-p-0046b)
   54.00 - 000 588 00 81 00 Charger (ws54.00-p-0037b)
   54.00 - 000 588 00 84 00 Heat gun (ws54.00-p-0049b)
   54.00 - 000 588 02 19 00 Battery tester (ws54.00-n-3006b)
   54.00 - 000 588 02 81 00 Jump-starting device (ws54.00-p-0041b)
   54.00 - 000 588 03 81 00 Jumper cables (ws54.00-p-0039b)
   54.00 - 000 588 06 19 00 Measuring instrument (ws54.00-p-0043b)
   54.00 - 000 588 16 98 00 Support (ws54.00-p-0047b)
   54.00 - 000 589 30 37 00 Wire stripper (ws54.00-p-0025b)
   54.00 - 000 589 88 63 00 Removal assembly (ws54.00-p-0067b)
   54.00 - 124 589 00 21 00 35 Pin socket box (ws54.00-n-0002b)
   54.00 - 124 589 19 21 00 Pulse counter (ws54.00-p-0004b)
   54.00 - 129 589 00 09 00 Pin socket (ws54.00-n-0007b)
   54.00 - 129 589 00 21 00 126-pin socket box (ws54.00-p-0008b)
   54.00 - 129 589 01 09 00 Pin socket (ws54.00-p-0040b)
   54.00 - 140 589 01 33 00 Mounting lever (ws54.00-p-0009a)
   54.00 - 140 589 01 63 00 Contacting module 1 (ws54.00-p-0010b)
   54.00 - 140 589 02 33 00 Pulling hook (ws54.00-p-0011b)
   54.00 - 140 589 06 63 00 Contacting box (ws54.00-p-0013b)
   54.00 - 140 589 10 33 00 Spacer (ws54.00-p-0014b)
   54.00 - 140 589 12 21 00 Baseline current draw test adapter 1 (ws54.00-p-0015b)
   54.00 - 140 589 13 21 00 Quiescent current test adapter 2 (ws54.00-p-0016b)
   54.00 - 140 589 14 63 00 Adapter (ws54.00-p-0017b)
   54.00 - 210 589 02 33 00 Unlocking tool for SPT _ JPT contacts (ws54.00-p-0042b)
   54.00 - 220 589 00 99 00 Electrical connection kit (ws54.00-p-0050b)
   54.00 - 5451 - Function check signal system, indicator lamps, symbol lights and interior lighting Model 107 from 8_85; 123; 124, 129, 140 up to 6_93; 126 from 9_85; 201 from 1_85 (wh5451pkw0000x)
   54.00 - CAN data bus, contents, function description (gf54.00-p-0999zz)
   54.00 - Forms Passenger cars Electrical system, equipment and instruments - - of54.00-z-3999az)
   54.00 - Technical modifications Passenger cars Electrical system, equipment and instruments (bt54.00-z-9999az)
   54.00 - Test and adjustment values Passenger cars Electrical system, equipment and instruments (be54.00-z-9999az)
   54.00 - Tightening torques Passenger cars Electrical system, equipment and instruments - - ba54.00-z-9999az)
   54.10 - 54.01 - Installation instructions Battery charge retention unit Model 129 (ea5401pez1000x)
   54.10 - Batteries - checking and correcting fluid level (ap54.10-p-5410a)
   54.10 - Charge battery (ar54.10-p-1130z)
   54.10 - Check condition of battery (ar54.10-p-1129z)
   54.10 - Check quiescent current consumption (ar54.10-p-1030ab)
   54.10 - Disconnect_connect battery's ground cable (ar54.10-p-0003a)
   54.10 - Disposal of toxic waste, battery (os54.10-p-1000zz)
   54.10 - Initial filling of battery (ar54.10-p-0001z)
   54.10 - Removing and installing battery (ar54.10-p-0005ea)
   54.10 - Service Information Battery tester (si54.10-z-0023a)
   54.10 - Service Information Charge battery (si54.10-p-0018a)
   54.10 - Service Information New test method for batteries (si54.10-p-0003a)
   54.10 - Service Information Wet battery handling (si54.10-p-0006a)
   54.10 - Treatment of battery if vehicle taken out of service (ar54.10-p-0006ea)
   54.15 - Removing and installing daytime running lamp relay (ar54.15-p-9998cs)
   54.15 - Removing and installing fuse and relay box (ar54.15-p-1255cs)
   54.15 - Removing and installing fuse and relay box (ar54.15-p-1255ct)
   54.15 - Removing and installing relays and control modules (ar54.15-p-1300cs)
   54.18 - 54.03 - Installation instructions Terminal blocks Models 129, 140 (ea5403pb4es00x)
   54.18 - Checking wiring harness for special equipment block (sm54.18-p-0003a)
   54.18 - Repair squib wiring harness for Supplemental Restraint System (SRS) (ar54.18-p-0600a)
   54.18 - Service Information bulletin Retrofit marten repeller on electrical lines (si54.18-p-0007a)
   54.18 - Service Information Damage code for electrical components (si54.18-z-0012a)
   54.18 - Service Information on wiring harness complaints (si54.18-p-0001a)
   54.20 - Removing and installing blower motor for control module box (ar54.20-p-2351cs)
   54.20 - Removing and installing blower motor for module box (ar54.20-p-2350cs)
   54.20 - Removing and installing control module box (ar54.20-p-1257cs)
   54.20 - Removing, installing module box (ar54.20-p-2360cs)
   54.21 - 1.1 - Base module (BM) 11 - Diagnosis - Fault memory Model 124.034_036, 129.067_076, 140 - M 104,119,120 LB_ME (dh0101pf00011x)
   54.21 - 1.1 - Base module (BM) 21 - Test program - Electrics, Location of components Model 124.034_036, 129.067_076, 140 - M 104,119,120 LB_ME (dh0101pf00021x)
   54.21 - 1.1 - Base module (BM) 22 - Test program - Electrics Conditions for testing Model 124.034_036, 129.067_076, 140 - M 104,119,120 LB_ME (dh0101pf00022x)
   54.21 - 1.1 - Base module (BM) 23 - Test program - Electrics, Testing Model 124.034_036, 129.067_076, 140 - M 104,119,120 LB_ME (dh0101pf00023x)
   54.21 - Programming of control units (ar54.21-p-0014y)
   54.21 - Programming of control units (ar54.21-p-0014z)
   54.21 - SCAN coding of control units (ar54.21-p-0015x)
   54.21 - Service Information Malfunctions due to other-make installations (si54.21-p-0007a)
   54.21 - Service Information Programming of control units (si54.21-p-0008a)
   54.21 - Service Information Reimbursement of additional work in event of programming abort (si54.21-p-0039a)
   54.25 - Removing and installing combination switch (ar54.25-p-2800cs)
   54.25 - Removing and installing switch in center console (ar54.25-p-3190cs)
   54.25 - Service Information bulletin Clutch pedal start enable switch (S40_5) (si54.25-p-0006a)
   54.30 - 1.1 - Instrument cluster (KI) 11 - Diagnosis - Function check Model 129 (dh0101pi10011x)
   54.30 - 1.1 - Instrument cluster (KI) 12 - Diagnosis - Troubleshooting chart Model 129 (dh0101pi10012x)
   54.30 - 1.1 - Instrument cluster (KI) 21 - Test program - Electrical system - Location of components Model 129 (dh0101pi10021x)
   54.30 - 1.1 - Instrument cluster (KI) 22 - Test program - Electrical system - Pre-requisites for testing Model 129 (dh0101pi10022x)
   54.30 - 1.1 - Instrument cluster (KI) 23 - Test program - Electrical system - Test Model 129 (dh0101pi10023x)
   54.30 - 1.2 - Instrument cluster (KI) 11 - Diagnosis - Function check Model 129 (USA) (dh0102pi10011x)
   54.30 - 1.2 - Instrument cluster (KI) 12 - Diagnosis - Troubleshooting chart Model 129 (USA) (dh0102pi10012x)
   54.30 - 1.2 - Instrument cluster (KI) 21 - Test program - Electrical system - Location of components Model 129 (USA) (dh0102pi10021x)
   54.30 - 1.2 - Instrument cluster (KI) 22 - Test program - Electrical system - Prerequisites for testing Model 129 (USA) (dh0102pi10022x)
   54.30 - 1.2 - Instrument cluster (KI) 23 - Test program - Electrical system - Test Model 129 (USA) (dh0102pi10023x)
   54.30 - 1.7 - Instrument cluster (IC) 10 - Diagnosis - Modification notes Model 129 (dh0107pi00010x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer 11 - Diagnosis - Function check Model 129 up to 05_96 (dh0107pi00011x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer 21 - Test program - Electrical system - Location of components Model 129 up to 05_96 (dh0107pi00021x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer 22 - Test program - Electrical system - Prerequisites for testing Model 129 up to 05_96 (dh0107pi00022x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer 23 - Test program - Electrical system - Testing Model 129 up to 08_95 (dh0107pi00023x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer display 12 - Diagnosis - Troubleshooting chart Model 129 up to 05_96 (dh0107pi00012x)
   54.30 - 1.7 - Instrument cluster (IC) with digital odometer display 24 - Test program - Electrical system - Testing Model 129 from 09_95 up to 05_96 (dh0107pi00024x)
   54.30 - 1.8 - Instrument cluster (IC) 10 - Diagnosis - Modification notes Model 129 USA (dh0108pi00010x)
   54.30 - 1.8 - Instrument cluster (IC) with digital odometer 11 - Diagnosis - Function check Model 129 USA up to 05_96 (dh0108pi00011x)
   54.30 - 1.8 - Instrument cluster (IC) with digital odometer 12 - Diagnosis - Troubleshooting chart Model 129 USA up to 05_96 (dh0108pi00012x)
   54.30 - 1.8 - Instrument cluster (IC) with digital odometer 21 - Test program - Electrical system - Location of components Model 129 USA up to 05_96 (dh0108pi00021x)
   54.30 - 1.8 - Instrument cluster (IC) with digital odometer 22 - Test program - Electrical system - Prerequisites for testing Model 129 USA up to 05_96 (dh0108pi00022x)
   54.30 - 1.8 - Instrument cluster (IC) with digital odometer 23 - Test program - Electrical system - Testing Model 129 USA up to 08_95 (dh0108pi00023x)
   54.30 - 1.8 - instrument cluster (IC) with digital odometer display 24 - Test program - Electrical system - Testing Model 129 USA from 09_95 up to 05_96 (dh0108pi00024x)
   54.30 - 54.01 - Installation instructions Two tone horn_fanfare horn Model 129 with left-hand steering (ea5401pb4es00x)
   54.30 - Checking exterior lamp failure indicator (ar54.30-p-6070cs)
   54.30 - Contents, function description, instrument cluster (IC) (gf54.30-p-0997az)
   54.30 - Instrument cluster (IC) diagnosis, contents (ad54.30-p-1000az)
   54.30 - Instrument cluster (IC) diagnosis contents (ad54.30-p-1000ez)
   54.30 - Removing and installing bulbs in instrument cluster (ar54.30-p-6049cs)
   54.30 - Removing and installing display instruments in instrument cluster (ar54.30-p-6111cs)
   54.30 - Removing and installing electronic plate (ar54.30-p-6040cs)
   54.30 - Removing and installing instrument cluster (ar54.30-p-6015ea)
   54.30 - Removing and installing instrument cluster housing (ar54.30-p-6031cs)
   54.30 - Removing and installing outside temperature sensor (ar54.30-p-6341cs)
   54.30 - Removing and installing outside temperature sensor (ar54.30-p-6341ct)
   54.30 - Service information on reading and parameterizing instrument cluster (si54.30-p-0002a)
   54.50 - 0415 - Function of the trip computer A. Models 107, 124, 126, B. Models 129, 140 (ra54001070415x)
   54.50 - 0418 - Information for troubleshooting A. Models 107, 124, 126, B. Models 129, 140 (ra54001070418x)
   54.50 - 0420 - Checking the function of the trip computer A. Models 107, 124, 126, B. Models 129, 140 (ra54001070420x)
   54.50 - 0424 - Adapting the fuel consumption display A. Models 107, 124, 126, B. Models 129, 140 (ra54001070424x)
   54.50 - 0430 - Removal and installation of the trip computer keyboard Models 124, 126, 129, 140 (ra54001070430x)
   54.50 - 0433 - Removal and installation of the trip computer control unit with display A. Model 129, B. Model 140 (ra54001070433x)
   54.50 - 2.1 - Trip information computer (RRE) 11 - Diagnosis - Function check Model 129 (dh0201pi10011x)
   54.50 - 2.1 - Trip information computer (RRE) 12 - Diagnosis - Troubleshooting chart Model 129 (dh0201pi10012x)
   54.50 - 2.1 - Trip information computer (RRE) 21 - Test program - Electrical system - Location of components Model 129 (dh0201pi10021x)
   54.50 - 2.1 - Trip information computer (RRE) 22 - Test program - Electrical system - Pre-requisites for testing Model 129 (dh0201pi10022x)
   54.50 - 2.1 - Trip information computer (RRE) 23 - Test program - Electrical system - Testing Model 129 (dh0201pi10023x)
   54.50 - Service Information Reset trip computer following engine control unit software update (si54.50-p-0002a)
   54.50 - Technical modifications Trip computer Models 124, 126, 129, 140, 201 (ra5400107ta00x)
   54.65 - Service Information Warranty and goodwill settlement for Parktronic sensors (si54.65-p-0002a)
58_Tools
   58.00 - Forms Passenger cars Tools (of58.00-z-3999az)
   58.20 - Service information for special tools (si58.20-p-0002b)
   58.20 - Service Information Modify chain separating tool and rivet press tool (si58.20-d-0001sf)
   58.20 - Service information New special tool (si58.20-p-0005a)
   58.20 - Special tools in EPC (si58.20-p-0019a)
   58.30 - Service information New commercially available tool (si58.30-p-0002b)
   58.40 - Fault report for HHT, MUX, PM, Case (wb0000algfm00z)
   58.40 - Service Information bulletin Ease of access to the User Help Desk (si58.40-z-0030a)
   58.40 - Service Information bulletin Procedure when processing imports of system and component returns of the Star Diagnosis system (si58.40-z-0035a)
   58.40 - Service Information Diagnosis Assistance System (DAS) (si58.40-p-0005a)
   58.40 - Service Information Identification of add-ons installed on XENTRY Connect (si58.40-z-0019a)
   58.40 - Service information Introduction of electronic stethoscope for noise diagnosis (si58.40-p-0036a)
   58.40 - Service Information Modified display when doing quick tests in STAR DIAGNOSIS (si58.40-p-0010a)
   58.40 - Service Information Multiplexer (si58.40-z-0041a)
   58.40 - Service Information No WLAN connection between XENTRY Connect and XENTRY Tab after Update 09_2014 (si58.40-z-0025a)
   58.40 - Service information Procedure for messages on the screen for proxy entries as per Star Diagnosis update 10_2007 (si58.40-z-0028a)
   58.40 - Service Information Procedure for returning Star Diagnosis compact (si58.40-z-0018a)
   58.40 - Service information Repairs to STAR Diagnosis cable (si58.40-p-0006a)
   58.40 - Service Information Run time limit for Star Diagnosis software (si58.40-z-0014a)
   58.40 - Service Information Software update for tester MB3000 - - si58.40-p-0044a)
   58.40 - Service Information STAR DIAGNOSIS (si58.40-p-0007b)
   58.40 - Service information Test instrument for radio transmitter (si58.40-p-0004a)
   58.40 - Service Information Test interval for Midtronics battery tester (si58.40-z-0002a)
   58.40 - Service Information Upgrade campaign for MIDTRONICS Micro717 battery tester (si58.40-z-0024a)
   58.40 - Service Information Workshop equipment in EPC_WIS_ASRA (si58.40-z-0045a)
   58.50 - Shop-made tools Passenger cars (wf58.50-z-0998az)
60_Body - General
   60.00 - 000 588 01 23 00 Body straightening system (ws60.00-p-0023k)
   60.00 - 000 588 01 84 00 Welder (ws60.00-p-0021k)
   60.00 - 000 588 02 39 00 Rivet press tool (ws60.00-p-0010b)
   60.00 - 000 588 02 84 00 Welder (ws60.00-p-0022k)
   60.00 - 000 589 86 63 00 Adapter (ws60.00-p-0085k)
   60.00 - 0070 - Clearances on the hood, doors and lid Model 129 (ra60001290070x)
   60.00 - 0200 - Safety measures prior to arc welding Model 129 (ra60001290200x)
   60.00 - 108 589 00 76 00 Set of planishing tools (ws60.00-p-0002k)
   60.00 - 110 589 11 63 00 Angular scraper (ws60.00-p-0003k)
   60.00 - 115 589 28 63 00 Smoothing block (ws60.00-p-0
...