Lexus IS200, IS220d, IS250, IS300, IS350, IS430, IS F 1998-2016 Workshop Repair & Service Manual

Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 1998-2016 Lexus IS 200, IS 220d, IS 250, IS 250C, IS 250C F Sport, IS 250 F Sport, IS 300, IS 300C, IS 300 SportCross, IS 350, IS 350C, IS 350C F Sport, IS 350 F Sport, IS 430, IS F. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 1998-2016 Lexus IS 200, IS 220d, IS 250, IS 250C, IS 250C F Sport, IS 250 F Sport, IS 300, IS 300C, IS 300 SportCross, IS 350, IS 350C, IS 350C F Sport, IS 350 F Sport, IS 430, IS F is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: Lexus
YEAR: 1999 2000 2001 2002 2003 2004 2005
MODEL: IS200 (XE10 Series, 1st Generation)

MAKE: Lexus
YEAR: 2005 2006 2007 2008 2009
MODEL: IS250, IS220D (GSE20, ALE20 Series)

MAKE: Lexus
YEAR: 2005 2006 2007 2008 2009
MODEL: IS250, IS220D (GSE20, ALE20 Series)

IS 200, IS 220d, IS 250, IS 250C, IS 250C F Sport, IS 250 F Sport, IS 300, IS 300C, IS 300 SportCross, IS 350, IS 350C, IS 350C F Sport, IS 350 F Sport, IS 430, IS F

EXCERPT:
13. INSTALL SERVICE HOLE COVER
(a) Install the service hole cover to the door panel.
HINT: When installing the service hole cover, pull out the links and the connectors through the service hole cover. There should be no wrinkles or folds after attaching the service hole cover. After attaching the service hole cover, sealing condition
should be confirmed.
(b) Install the door trim bracket with the 2 screws.
14. INSTALL INSIDE HANDLE
Connect the 2 cables to the inside handle, then install the inside handle with the screw.
NOTICE: At the time of locking cable reassembly, please refer to the following items.
Set the door lock assembly to the LOCK position. Hold the lock knob to the LOCK position by hand, and do not pull the cable while connecting the locking cable.
15. INSTALL FRONT NO.1 SPEAKER
(a) Using an air riveter or hand riveter, install the front No.1 speaker.
...