Complete digital official shop manual contains service, maintenance, and troubleshooting information for the 2001-2015 DAF LF45, LF55. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for 2001-2015 DAF LF45, LF55 Trucks is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

MAKE: DAF
MODEL: LF45, LF55 Series
YEAR: 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

EXCERPT:
LF45/55 series STRUCTURE
TECHNICAL DATA
DIAGNOSTICS
SINGLE REAR AXLE 5.10
SINGLE REAR AXLE 5.12
SINGLE REAR AXLE 5.14
SINGLE REAR AXLE 8.20
SINGLE REAR AXLE 10.20
SINGLE REAR AXLE 10.26
SINGLE REAR AXLE 11.26
SINGLE REAR AXLE 1132
...
SINGLE REAR AXLE 5.12 - Draining and filling
4. DRAINING AND FILLING
4.1 DRAINING AND FILLING, DIFFERENTIAL
To prevent skin injury, avoid unnecessary contact with the drained oil.
Draining the differential
1. Position the vehicle on a level surface.
2. Place a suitable tray beneath the differential to collect the oil.
3. Remove the drain plug (1) and the level check/filler plug (2). Drain the oil.
4. Apply sealant to the thread of the drain plug (1). Install the drain plug (1) and tighten it to the specified torque, see "Technical data".
Filling the differential
1. Fill the differential gear via the level check/filler plug (2) with the specified, correct quantity of oil. See "Technical data".
2. Check the oil level after approx. 5 minutes; it should reach up to the level check/filler plug (2).
3. Apply the specified sealant to the level/filler plug (2) thread. See "Technical data". Fit the level check/filler plug (2).
4.2 DRAINING AND FILLING, WHEEL HUBS
To prevent skin injury, avoid unnecessary contact with the drained oil.
Note: The design of the hub and the location of the drain/filler plug may differ from the illustration, depending on the version.
Draining the wheel hub
1. Position the vehicle on a level surface.
2. Position the wheels in such a way that the drain/filler plug (1) is on the underside.
3. Place a suitable tray under the hub to collect the oil. Remove the drain/filler plug (1).
4. Drain the oil and let the oil leak out of the hub.
Filling the wheel hub
1. Position the wheels in such a way that the drain/filler plug (1) is on the top side.
2. Fill the wheel hub with the specified, correct quantity of oil. See "Technical data".
3. Apply sealant to the thread of the drain/filler plug (1). Fit the drain/filler plug (1) into the hub.
...