Complete service repair manual for John Deere Combines 9570 STS, 9670 STS, 9770 STS, 9870 STS, with workshop information to maintain, repair, and rebuild.

John Deere Combines 9570 STS, 9670 STS, 9770 STS, 9870 STS workshop service repair manual includes:
* Numbered table of contents easy to use so that you can find the information you need fast.
* Detailed sub-steps expand on repair procedure information
* Numbered instructions guide you through every repair procedure step by step.
* Notes, cautions and warnings throughout each chapter pinpoint critical information.
* Bold figure number help you quickly match illustrations with instructions.
* Detailed illustrations, drawings and photos guide you through every procedure.
* Enlarged inset helps you identify and examine parts in detail.

TM101919 English - John Deere Combines 9570 STS, 9670 STS, 9770 STS and 9870 STS Technical Manual (Repair).PDF
tm101914 Portuguese - 9570 STS, 9670 STS, 9770 STS and 9870 STS Combine Repair.pdf
tm101954 Russian - Reparação das Colheitadeiras 9570 STS™, 9670? S?S™, 9770 STS™ e 9870 STS™
tm101959 Russian - Ремонт комбайнов 9570 STS™, 9670 STS™, 9770??S?S™ и 9870 STS
ctm103554 Portuguese - 100 Series Hydraulic Cylinders CTM.pdf

Total Pages: 2,476 pages
File Format: PDF (PC/Mac/Android/Kindle/iPhone/iPad; bookmarked, ToC, Searchable, Printable)
Language: English

MAIN SECTIONS
Foreword
   General
      Safety
      Specifications
      Tune-Up and Adjustment
      Fuels And Lubricants
   Engine
      Remove And Install Engine
      Cooling System
   Fuel And Air Repair
      Air Intake System
      Diesel Fuel System
   Electrical System
      Batteries
      Harness And Connector Repair
      Wire Harness Routing
      Controllers and Power Distribution
      Lighting
      Operators Station
      Sensors And Switches
      Wiper
      Alternator
      Starting Motor
      GreenStar Components
   Power Train Repair
      Transmission And Differential-Three Speed Transmission
      Hydrostatic System-Three Speed Transmission
      Transmission and Differential-Two-Range Automatic Transmission
      Hydrostatic Drive Pump-Two-Range Automatic Transmission
      Hydrostatic Drive Motor-Two-Range Automatic Transmission
      Single Reduction Final Drive-Heavy Duty
      Cam Lobe Motor
      Tires And Wheels
   Power Steering And Brakes
      Steering
      Brakes
      Brakes-Two-Range Automatic Transmission
   Hydraulic Repair
      Hydraulic Reservoir
      Hydraulic Pumps
      Hydraulic Valves
      Hydraulic Cylinders
      Motors
      Accumulator
   Separator Shell
      Gull Wing Doors
   Operator Station Repair
      Air Conditioning System (R134a)
      System Components
      Cab
   Feeder House Repair
      Conveyor
      Top Shaft And Slip Clutch
      Feeder House Drives And Reverser Gear Case
      Lateral Tilt Cylinder
      Lateral Tilt Frame
      Five Speed Feeder House Drive Gear Case
   Separator
      Separator Repair
      Separator Drives
      Residue Disposal
      Conveyor Augers, Cleaning Fan And Chaffer And Sieve Frame
      Tailings Elevator And Augers
      Primary Countershaft Gear Case
      Header Electromagnetic Clutch
   Grain Tank And Unloading System Repair
      Grain Tank Cross Augers
      Unloading Auger System Drives
      Vertical Unloading Auger And Lower Gear Case
      Horizontal Unloading Auger And Gear Case
      Clean Grain Elevator
      Grain Tank And Extensions
   Engine Gear Case And Control Valve Repair
      Engine Gear Case And Valve
   Dealer Fabricated Tools
      Dealer Fabricated Tools

TABLE OF CONTENTS
Section 10: General................33
  Group 05: Safety................33
    Recognize Safety Information................37
    Understand Signal Words................38
    Handle Fluids Safely—Avoid Fires................39
    Prevent Battery Explosions................277
    Handling Batteries Safely................278
    Prepare for Emergencies................43
    Prevent Acid Burns................44
    Avoid High-Pressure Fluids................46
    Service Accumulator Systems Safely................47
    Wait Before Opening High-Pressure Fuel System................48
    Park Machine Safely................49
    Support Machine Properly................50
    Wear Protective Clothing................51
    Work in Clean Area................52
    Service Machines Safely................53
    Work In Ventilated Area................54
    Illuminate Work Area Safely................55
    Replace Safety Signs................56
    Use Proper Lifting Equipment................57
    Remove Paint Before Welding or Heating................58
    Avoid Heating Near Pressurized Fluid Lines................59
    Service Tires Safely................1079
    Avoid Harmful Asbestos Dust................61
    Practice Safe Maintenance................62
    Construct Dealer-Made Tools Safely................64
    Use Proper Tools................65
    Decommissioning — Proper Recycling and Disposal of Fluids and Components................66
    Use Adequate Service Facilities................67
    Live With Safety................68
    Servicing Electronic Control Units................69
    Welding Near Electronic Control Units................70
    Keep Electronic Control Unit Connectors Clean................71
  Group 10: Specifications................2400
    Ground Speeds (Fast Idle) Two Speed Four Wheel Drive................74
    Turning Radius................76
    Operating Speeds - 9570 STS Combine................77
    Specifications - 9570 STS Combine................80
    Dimensions - 9570 STS Combine................83
    Dimension Reference Points - 9570 STS Combine................85
    Operating Speeds - 9670 STS, 9770 STS Combines................86
    Specifications - 9670 STS................89
    Specifications - 9770 STS................92
    Dimensions - 9670 STS, 9770 STS Combines................95
    Dimension Reference Points - 9670 STS, 9770 STS Combines................97
    Operating Speeds - 9870 STS Combine................98
    Specifications - 9870 STS Combine................101
    Dimensions - 9870 STS Combine................104
    Dimension Reference Points - 9870 STS Combine................106
    Metric Bolt and Screw Torque Values................107
    Unified Inch Bolt and Screw Torque Values................109
    Sealants and Adhesives Cross-Reference Chart................111
    Face Seal Fittings Assembly and Installation—All Pressure Applications................113
    Metric Face Seal And O-Ring Stud End Fitting Torque Chart—Standard Pressures................114
    Metric Face Seal and O-Ring Stud End Fitting Torque Chart—High Pressure Applications................116
    SAE Face Seal and O-Ring Stud End Fitting Torque Chart—Standard Pressures................118
    SAE Face Seal and O-Ring Stud End Fitting Torque Chart—High Pressure Applications................120
    Four Bolt Flange Fittings Assembly and Installation—All Pressure Applications................122
    SAE Four Bolt Flange Cap Screw Torque Values—Standard Pressure Applications................123
    SAE Four Bolt Flange Cap Screw Torque Values—High Pressure Applications................124
    External Hexagon Port Plug Torque Chart................125
    Prevent Hydraulic System Contamination................139
    Check Oil Lines and Fittings................140
    Basic Electrical Component Handling / Precautions For Vehicles Equipped With Computer Controlled Systems................141
  Group 15: Tune-Up and Adjustment................132
    Tune-Up and Adjustment................132
    Care and Maintenance of Belts................134
    Defective Belts................136
    Prevent Hydraulic System Contamination................139
    Check Oil Lines and Fittings................140
    Basic Electrical Component Handling / Precautions For Vehicles Equipped With Computer Controlled Systems................141
  Group 20: Fuels And Lubricants................35
    Handle Fuel Safely—Avoid Fires................143
    Handling and Storing Diesel Fuel................145
    Diesel Fuel................145
    BioDiesel Fuel................147
    Lubricity of Diesel Fuel................149
    Testing Diesel Fuel................150
    Diesel Engine Coolant (engine with wet sleeve cylinder liners)................151
    Operating in Warm Temperature Climates................153
    Supplemental Coolant Additives................154
    Additional Information About Diesel Engine Coolants and John Deere LIQUID COOLANT CONDITIONER................155
    Testing Diesel Engine Coolant................157
    Diesel Engine Break-In Oil — Non-Emissions Certified and Certified Tier 1, Tier 2, Tier 3, Stage I, Stage II, and Stage III................158
    Diesel Engine Oil — Tier 3 and Stage III................160
    Oilscan™ and CoolScan™................162
    Hydrostatic Drive System, Main Hydraulic System and Main Engine Gearcase Oils................163
    Transmission (Non Two Range Automatic Transmission Machines), Final Drives, Loading Auger, Primary Countershaft and Two-Speed Separator Drive Gear Cases................164
    Feeder House Reverser Gear Case................166
    Grease................167
    Brake Fluid (Non Two Range Automatic Transmission Machines)................169
    Lubricant Storage................170
    Alternative and Synthetic Lubricants................171
    Mixing of Lubricants................172
Section 20: Engine................173
  Group 05: Remove And Install Engine................173
    Essential or Recommended Tools................2396
    Specifications................2400
    Other Material................2399
    John Deere Engine Repair—Use CTM................245
    Remove Engine—6.8 L................173
    Install Engine—6.8 L................173
    Remove Engine—9.0 L................173
    Install Engine—9.0 L................173
    Remove Engine—13.5 L................173
    Install Engine—13.5 L................173
    Remove and Install Flywheel Pilot Bearing................206
  Group 10: Cooling System................173
    Essential or Recommended Tools................2396
    Specifications................2400
    John Deere Engine Repair—Use CTM................245
    Rotary Screen Drive................212
    Rotary Screen Idler Arm and Sheaves................214
    Remove and Install Upper and Lower Air Scoops................215
    Remove and Install Rotary Screen................217
    Adjusting Rotary Screen Knife Comb................220
    Remove Radiator—6.8 L Engine................173
    Install Radiator—6.8 L Engine................173
    Remove Radiator—9.0 L and 13.5 L Engines................173
    Install Radiator—9.0 L and 13.5 L Engines................173
    Test Radiator................237
    Test Radiator Cap................238
    Replace Thermostats................239
    Repair or Replace Water Pump................240
Section 30: Fuel And Air Repair................241
  Group 05: Air Intake System................241
    Other Material................2399
    Specifications................2400
    John Deere Engine Repair—Use CTM................245
    Remove and Install Turbocharger................246
    Turbocharger Repair................247
    Remove and Install Charge Air Cooler................248
    Cleaning the Charge Air Cooler................253
  Group 10: Diesel Fuel System................241
    Other Material................2399
    Specifications................2400
    Remove and Install Fuel Tank................257
    Remove and Install Fuel Tank Shut-Off Valve and Drain Valve—9570, 9670, and 9770................261
    Remove and Install Fuel Tank Shut-Off Valve—9870................264
    Remove and Install Fuel Tank Strainer and Breather................265
    Replace Cold Weather Starting Aid Can................267
    Remove and Install Cold Weather Starting Aid................268
Section 40: Electrical System................270
  Group 05: Batteries................270
    Prevent Battery Explosions................277
    Handling Batteries Safely................278
    Prevent Damage to Electrical Systems................280
    Checking Electrolyte Specific Gravity................281
    Battery Replacement................283
    Remove and Install Batteries................284
    Connecting Booster Batteries................287
    Charging Batteries................288
    Connecting Battery Cables................290
  Group 10: Harness And Connector Repair................270
    Essential or Recommended Tools................2396
    Other Material................2399
    Use Electrical Insulating Compound................302
    Using High-Pressure Washers................303
    Electrical System Visual Inspection................304
    Basic Electrical Component Handling / Precautions for Vehicles Equipped with Computer Controlled Systems................305
    Electrical Connector / Wiring Harness Handling and Repair................306
    Repair Procedure R-A................307
    Repair Procedure R-B................312
    Repair Procedure R-C................316
    Repair Procedure R-D................321
    Repair Procedure R-E................324
    Repair Procedure R-F................328
    Repair Procedure R-G................332
    Repair Procedure R-I................335
    Repair Procedure R-J................338
    Repair Procedure R-K................343
    Repair Procedure R-M................346
    Repair Procedure R-N................350
    Repair Procedure R-AE................354
    Repair Procedure R-AF................358
    Repair Procedure R-AG................361
    Repair Procedure R-AH................364
    Repair Procedure R-AI................366
    Repair Procedure R-AJ................369
    Repair Procedure R-AK................374
    Repair Procedure R-AL................377
  Group 15: Wire Harness Routing................271
    Replace Harness................382
    Cab Main Wiring Harness................383
    Left-Hand Main Wiring Harness................384
    LC1 Wiring Harness................385
    LC2 Wiring Harness................386
    Self-Leveling Shoe Wiring Harness................387
    Right-Hand Main Wiring Harness................388
    Engine Deck Wiring Harness—6.8 L and 9.0 L................389
    Engine Deck Wiring Harness—13.5 L................390
  Group 20: Controllers and Power Distribution................271
    Fuse Identification................394
    Remove and Install Cab Power Module (CPM)................397
    Remove and Install Right and Left Power Modules................398
    Programming Control Units................399
  Group 25: Lighting................271
    Safety Rules When Replacing Halogen Bulbs................403
    Safety Rules When Replacing High Intensity Discharge (HID) Xenon Bulbs................404
    Cab Head Light Bulb Replacement and Adjustment................405
    Remove and Install High Intensity Discharge (HID-Xenon) Lights (Optional)................407
    Remove and Install High Intensity Discharge (HID-Xenon) Ballasts................410
    Auxiliary Field, Access Door, Grain Tank, Unload Auger and Work Light Bulb Replacement................411
    Side Finder (Optional) Light Bulb Replacement................412
    Front Turn Signal, Tail and Side Light Bulb Replacement................413
    Harzard/Warning Light Bulb Replacement................414
    Cleaning Shoe Light Bulb Replacement................415
    Turn Signal Light Bulb Replacement................416
    Dome Light Bulb Replacement................417
  Group 30: Operators Station................272
    Other Material................2399
    Specifications................2400
    Instruments And Controls Identification................421
    Remove and Install Overhead Panel................423
    Remove and Install Right-Hand Overhead Panel................425
    Remove and Install Light Panel Dimmer Switch................426
    Remove and Install Overhead Panel and Right-Hand Overhead Panel Rocker Switches................427
    Remove and Install ClimaTrak ClimaTrak is a trademark of Deere & Company Automatic Air Conditioning/Heater Temperature Control Switch and Fan Switch................272
    Remove and Install Radio................430
    Remove and Install Radio Speaker................432
    Remove and Install Radio Antenna................433
    Replace Cornerpost Main Circuit Board................435
    Remove Header Control Module................439
    Remove VisionTrak VisionTrak is a trademark of Deere & Company Module and Digital Tachometer Module................272
    CommandTouch Console Controls................441
    Remove and Install CommandTouch Console................443
    Remove and Install Armrest Display Unit................445
    Remove and Install Header and Separator Engage Switches................446
    Remove and Install Backlighting Driver................447
    Remove and Install Dial-A-Speed and Active Header Control Switches................449
    Remove and Install CommandTouch Console Switch Panel................451
    Replace Neutral Safety Switch................454
    Remove and Install Multi-Function Handle................456
    Remove and Install Start Switch................458
    Remove and Install Starting Aid Switch................460
    Remove and Install Turn Signal/Side Finder Light Switch................461
    Remove and Install Horn Switch................462
    Remove and Install Remote Mirrors (Optional)................463
    Remove and Install Remote Mirror Switch (Optional)................464
  Group 35: Sensors And Switches................273
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Shaft Speed Sensor Locations................469
    Remove and Install Ground Speed Sensor................471
    Remove and Install Low Shaft Speed Sensor................472
    Remove and Install STS Rotor Speed Sensor................473
    Remove and Install Full Grain Tank Sensor................475
    Remove and Install Straw Spreader Speed Sensor................476
    Remove and Install Tailings Sensor................480
    Remove and Install (Shoe/Separator) VisionTrak VisionTrak is a trademark of Deere & Company Sensors................273
    Remove and Install Concave Position Sensor................482
    Remove and Install Header Height and Lateral Tilt Control Sensors................483
    Remove and Install Folding Unloading Auger Position Sensor................485
    Remove And Install Multi-Function Handle Feed Rate Sensor................488
    Remove and Install Hydraulic Reservoir Temperature Sensor................495
    Remove and Install Coolant Temperature Sensor................496
    Remove and Install Fuel Level Sensor................499
    Remove and Install Park Brake Switch................500
    Remove and Install Air Filter Restriction Switch................501
    Remove and Install Fuel Transfer Pump Pressure Sensor—6.8 L Engine and 9.0 L Engine................502
    Remove and Install High and Low Fuel Pressure Sensors—13.5 L Engine................503
    Remove and Install Engine Gear Case Temperature and Pressure Switches................504
    Remove and Install Hydro Charge Pressure Switch................505
    Remove and Install Engine Oil Pressure Sensor................506
    Remove and Install Compressor Inlet Temperature Sensor................508
    Remove and Install Pump Position Sensor—6.8 L Engine and 9.0 L Engine................509
    Remove and Install Cam Position Sensor—13.5 L Engine................510
    Remove and Install Engine Speed Sensor................511
    Remove and Install Exhaust Gas Recirculation (EGR) Exhaust Gas Temperature and Fresh Air Temperature Sensors................512
    Remove and Install Intake Manifold Pressure and Exhaust Gas Recirculation (EGR) Mixed Gas Temperature Sensor................514
    Remove and Install Turbocharger Speed Sensor................516
    Remove and Install Fuel Temperature Sensor................517
    Remove and Install Fuel Rail Pressure Sensor—6.8 L Engine and 9.0 L Engine................519
    Remove and Install Switches in the Ground Level Switch Bank................521
    Remove and Install Wheel Angle Sensor................522
    Remove and Install Back-Up Alarm Switch................527
    Back-Up Alarm—9870................528
    Back-Up Alarm—9570, 9670, 9770................529
  Group 40: Wiper................274
    Specifications................2400
    Remove and Install Wiper Motor................532
    Adjust Windshield Wiper................536
    Remove and Install Windshield Washer................538
  Group 45: Alternator................274
    Essential or Recommended Tools................2396
    Specifications................2400
    John Deere Engine Accessories—Alternator Repair—Use CTM77................543
    Remove and Install Alternator And Alternator Belt................544
    Remove and Install Alternator Pulley................546
  Group 50: Starting Motor................274
    Essential or Recommended Tools................2396
    Specifications................2400
    John Deere Starting Motor Repair................550
    Remove and Install Starting Motor................551
  Group 55: GreenStar Components................274
    Specifications................2400
    Other Material................2399
    Remove and Install GreenStar Mass-Flow Sensor................557
    Remove and Install GreenStar Moisture Sensor................561
    Disassemble and Assemble GreenStar Moisture Sensor................562
    Remove and Install GreenStar Moisture Sensor Actuator................564
    Remove and Install GreenStar Moisture Sensor Circuit Board................568
    Remove and Replace GreenStar Moisture Sensor Lower Cell Assembly................570
    Disassemble and Assemble Position Receiver................586
    Remove and Install Position Receiver................588
Section 50: Power Train Repair................589
  Group 05: Transmission And Differential—Three Speed Transmission................589
    Other Material................2399
    Specifications................2400
    Remove and Repair Shifter Forks and Shifter Cam................597
    Install Shifter Forks and Shifter Cam................599
    Remove and Install Transmission Lube Pump................602
    Remove and Install Suction Screen................605
    Remove Transmission................606
    Transmission Components................609
    Transmission Recondition................612
    Disassemble and Repair Transmission................613
    Assemble Transmission................622
    Install Transmission................626
    Remove and Install Gearshift Lever and Linkage................628
    Adjust Gearshift Linkage................630
  Group 10: Hydrostatic System—Three Speed Transmission................589
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Serial Number Plate................890
    Clean Hydrostatic Motor and Pump................640
    Flushing the Hydrostatic System................641
    Remove and Install Hydrostatic Motor................642
    Disassemble Hydrostatic Motor................644
    Inspect Parts................655
    Lack of Lubrication................656
    Abrasive Contamination................657
    Cavitation................658
    Over Speeding................659
    Inspect Thrust Plate................660
    Inspect Fixed Swashplate................661
    Inspect Piston Slipper................662
    Inspect Piston Retainer................664
    Inspect Cylinder Block................666
    Inspect Bearing Plate................667
    Inspect Valve Plate................670
    Inspect Bearing and Race................673
    Inspect Servo Piston................674
    Inspect Drive Shaft................675
    Replace Cylinder Block Spring................676
    Assemble Motor................677
    Remove and Install Motor Valve Block (Manifold)................691
    Repair Motor Valve Block................693
    Remove and Install Hydrostatic Pump................695
    Disassemble Drive Pump................699
    Assemble Drive Pump................716
    Replace High-Pressure Line Center Pivot O-Rings................736
    Disassemble and Assemble End Cover................737
    Repair Displacement Control Valve................739
    Disassemble and Assemble DisplacementControl Valve with Feed Rate (Optional)................590
    Electronic Proportional Displacement Control Valve Neutral Adjustment................743
    Remove and Install Charge Pump................747
    Repair Charge Pump................749
    Remove and Install Control Cable................751
    Adjust Hydrostatic Neutral Linkage................753
    Adjust Mechanical Displacement Control Valve Neutral................754
    Start-Up Procedure After Hydrostatic System Repair................756
  Group 15: Transmission and Differential—Two-Range Automatic Transmission................590
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Drain Oil................776
    Remove Two-Range Automatic Transmission................777
    Transmission Components—Overview................783
    Disassemble Two-Range Automatic Transmission................785
    Remove Brake Assemblies................788
    Brake Assemblies—Exploded View................791
    Disassemble Brake Assemblies................793
    Assemble Brake Assemblies................799
    Install Brake Assemblies................806
    Remove Differential Module................809
    Disassemble Differential Module (With Differential Lock)................813
    Differential Module (With Differential Lock)—Exploded View................819
    Assemble Differential Module (With Differential Lock)................821
    Install Differential Module................829
    Remove Gear-Shift Planetary Drive With Clutch................832
    Disassemble and Assemble Gear-Shift Planetary Drive With Clutch................837
    Install Gear-Shift Planetary Drive With Clutch................860
    Remove Countershaft................867
    Repair Countershaft................870
    Countershaft—Exploded View................873
    Install Countershaft................874
    Assemble Two-Range Automatic Transmission................879
    Install Two-Range Automatic Transmission................882
  Group 20: Hydrostatic Drive Pump—Two-Range Automatic Transmission................591
    Specifications................2400
    General View................948
    Serial Number Plate................890
    Clean Variable Pump................891
    Remove and Install Hydrostatic Pump (Two-Range Automatic Transmission)................892
    Replace Drive Shaft Seal................895
    Replace Boost Pump Seal................900
    Replace Control Piston Cover Seals................903
    Remove and Install Control Unit................907
    Disassemble Pump................911
    Disassemble Cylinder Assembly................917
    Disassemble Control Piston................919
    Hydrostatic Drive Pump Inspection Notes................968
    Assemble Pump................926
    Install Rotary Group................933
    Adjust Zero Position................940
  Group 25: Hydrostatic Drive Motor—Two-Range Automatic Transmission................592
    Essential or Recommended Tools................2396
    Specifications................2400
    Remove And Install Hydrostatic Drive Motor................945
    General View................948
    Replace Cover Plate Seal................949
    Replace Control Body Seals................951
    Disassemble Port Plate................953
    Assemble Port Plate................959
    Disassemble Rotary Group................962
    Inspection Notes................968
    Assemble Rotary Group................972
    Adjust Rotary Group................980
  Group 30: Single Reduction Final Drive—Heavy Duty................592
    Essential Tools or Recommended Tools................985
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Remove and Install Final Drive................990
    Disassemble and Assemble Final Drive................995
    Adjust Spindle Bearing................1008
  Group 35: Cam Lobe Motor................592
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Flushing Cam Lobe Motors................1020
    Remove Cam Lobe Motor................1021
    Install Cam Lobe Motor................1023
    Remove and Install Cam Lobe Motor Control Valve................1025
    Disassemble and Assemble Cam Lobe Motor Control Valve................1028
    Remove and Install Steering Yoke................1030
    Disassemble and Assemble Pivot Pins, Bushings, and Seals................1038
    Remove and Install Solenoid Valve and Valve Block................1041
    Remove and Install Displacement Control Valve................1046
    Remove and Install Cam and Piston Carrier................1049
    Remove and Install Stack Valve Seals................1056
    Remove and Install Axle Bearings and Seals................1061
  Group 40: Tires And Wheels................593
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Specifications................2400
    Service Tires Safely................1079
    Care and Service of Tires................1080
    Using Liquid Weight................1082
    Jacking Locations................1083
    Remove and Install Wheel................1084
    Drive Wheel Bolt Torque................1086
    Dual Wheels Bolt Torque................1087
    Rear Wheel Bolt Torque................1088
    Install Axle Extension Tubes................1089
    Install Dual Wheels and Truss Rod................1094
Section 60: Power Steering And Brakes................1101
  Group 05: Steering................1101
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Steering Pump Repair................1109
    Remove Steering Valve................1112
    Steering Valve................1112
    Disassemble Steering Valve................1114
    Assemble Steering Valve................1119
    Install Steering Valve................1125
    Electro-Hydraulic Steering Valve and Flowmeter—Exploded View................1127
    Remove and Install Flowmeter................1129
    AUTOTRAC Assisted Steering Flowmeter—Exploded View................1130
    Steering Column Components................1131
    Disassemble and Assemble Steering Column................1133
    Replace Telescoping Shaft Bearings................1139
    Remove and Install Steering Cylinder................1141
    Steering Cylinder—Exploded View................1146
    Toe-In Adjustment................1147
    Remove and Install Steering Tie Rod Joint................1148
    Remove and Install Tie Rod End................1150
    Remove and Install Rear Spindle Assembly—Non-Powered................1101
    Disassemble and Assemble Rear Spindle Assembly—Non-Powered................1101
    Remove and Install Rear Axle Pivot Bushings................1162
    Rear Axle Adjustment................1167
  Group 10: Brakes................1101
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Deglazing Brake Linings................1173
    Remove Brake Drum................1174
    Remove Brake Shoe................1176
    Repair Brakes................1178
    Assemble Brakes................1182
    Install Brake Drum................1184
    Remove and Install Master Cylinder................1185
    Disassemble and Assemble Master Cylinder (Double Bleed Screw)................1186
    Brake Fluid Reservoir................1188
    Adjusting Master Cylinder................1189
    Bleeding Brake System—Double Bleed Screw................1190
    Remove and Install Slave Cylinders................1195
    Disassemble and Assemble Slave Cylinder................1196
    Disassemble and Assemble Brake Pedals................1218
    Disassemble and Assemble Parking Brake Pedal................1204
    Adjust Park Brake Pedal................1213
  Group 15: Brakes—Two-Range Automatic Transmission................1102
    Specifications................2400
    Bleed Service Brakes................1216
    Disassemble and Assemble Brake Pedals................1218
    Disassemble and Assemble Oil Pressure Regulating Valve (Service Brake Circuit)................1220
    Check Brake Disk Thickness................1225
Section 70: Hydraulic Repair................1227
  Group 05: Hydraulic Reservoir................1227
    Essential or Recommended Tools................2396
    Specifications................2400
    Remove and Install Reservoir................1233
    Flushing the Hydraulic System................1239
    Flushing the Reel/Belt Pickup Drive System................1241
  Group 10: Hydraulic Pumps................1227
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Remove Main Hydraulic Pump................1247
    Marking Hydraulic Pump................1249
    Disassemble Hydraulic Pump................1250
    Replace Seal................1252
    Triple Main Hydraulic Pump—Exploded View................1253
    Quad Main Hydraulic Pump—Exploded View................1255
    Assemble Triple Main Hydraulic Pump................1257
    Assemble Quad Main Hydraulic Pump................1259
    Install Main Hydraulic Pump................1261
    Proportionator Pump—Exploded View................1262
    Assemble Proportionator Pump................1264
    Reel/Belt Pickup and Straw Spreader Pump—Exploded View................1266
    Remove And Install Reel/Belt Pickup Pump Drive................1268
    Disassemble and Assemble Reel/Belt Pickup Pump Drive................1272
    Remove Straw Spreader Pump................1277
    Install Straw Spreader Pump................1280
    Disassemble Reel/Belt Pickup Straw Spreader Pump................1282
    Assemble Reel/Belt Pickup and Straw Spreader Pump................1285
  Group 15: Hydraulic Valves................1227
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Remove and Install Left Front Valve Block................1292
    Disassemble and Assemble Left Front Valve Block................1294
    Remove and Install Right Forward Valve Block................1296
    Disassemble and Assemble Right Forward Valve Block................1298
    Disassemble and Assemble Five Speed Feeder House Drive Control Valve................1300
    Remove and Install Straw Spreader Control Valve Block................1302
    Disassemble and Assemble Straw Spreader Flow Control Valve................1304
    Valve Stack Identification................1306
    Remove and Install Hydraulic Valve Stack (HIC)................1307
    Disassemble and Assemble Hydraulic Valve Stack (HIC)................1309
    Remove and Install Header Height Control Valve................1313
    Remove and Install Accumulator Shut-off Valve................1315
    Remove and Install Transmission Control Valve................1316
    Remove and Repair Valves From Transmission Control Valve................1321
    Transmission Control Valve—Exploded View................1323
    Install Valves In Transmission Control Valve................1325
    Remove and Install Hydraulic Service Brake Valve................1327
    Disassemble and Assemble Hydraulic Service Brake Valve................1329
    Adjust Hydraulic Service Brake Valve................1330
    Feeder House Multi-Coupler Valve Identification................1331
    Disassemble, Inspect and Assemble Feeder House Multi-Coupler................1332
  Group 20: Hydraulic Cylinders................1228
    Specifications................2400
    Remove and Install Header Lift Cylinder................1338
    Disassemble and Assemble Header Lift Cylinder—Style A................1340
    Disassemble and Assemble Header Lift Cylinder—Style B................1342
    Remove and Install Unloading Auger Swing Cylinder................1344
    Unloading Auger Swing Cylinder Exploded View................1346
    Adjust Unloading Auger Swing Cylinder................1348
    Remove and Install Unloading Auger Drive Cylinder................1350
    Disassemble and Assemble Steering Cylinder................1352
  Group 25: Motors................1229
    Remove and Install Straw Spreader Motor................1360
    Remove and Install Wide Spread Tailboard Motors................1364
  Group 30: Accumulator................1229
    Essential or Recommended Tools................2396
    Accumulator (General Information)................1369
    Checking Accumulator Pressure................1370
    Header Float Accumulator Precharge Pressure................1372
Section 80: Separator Shell................1374
  Group 05: Gull Wing Doors................1374
    Other Material................2399
    Specifications................2400
    Remove and Install Gull Wing Doors................1378
    Remove and Install Rear Wall Panel................1380
    Composite Panel Repair................1382
    Align Gull Wing Doors................1386
    Remove and Install Engine Platform Ladder................1389
Section 90: Operator Station Repair................1390
  Group 05: Air Conditioning System (R134a)................1390
    Essential or Recommended Tools................2396
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Service Parts Kits................1401
    Hose and Tubing O-Ring Connection Torques................1402
    Discharge and Recovery of Air Conditioning Refrigerant................1403
    Remove and Install Compressor................1404
    Test Volumetric Efficiency................1407
    Leak Testing Air Conditioning System With Dye................1410
    Test Shaft Seal Leakage................1412
    Disassemble and Assemble Compressor Clutch................1414
    Check Clutch Hub Clearance................1416
    Inspect Compressor Manifold................1417
    Disassemble, Inspect, and Assemble Compressor................1418
    Remove and Install Compressor Relief Valve................1421
    System Information................1422
    Flush Air Conditioning System................1424
    Purge Air Conditioning System................1428
    Evacuate Air Conditioning System................1429
    Compressor Oil Information................1432
    Determine Correct Oil Charge................1433
    Check Refrigerant Oil Charge................1435
    Charge Air Conditioning System................1436
  Group 10: System Components................1390
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Air Conditioning System With Precleaner (General Information)................1441
    Remove and Install Receiver/Dryer................1442
    Remove and Install Recirculator Motor................1443
    Remove and Install Recirculator Fan Motor Driver................1444
    Remove and Install Blower Motor................1445
    Remove and Install Temperature Control Door Actuator................1446
    Remove and Install Heater Core................1447
    Remove Condenser................1449
    Repair Condenser................1452
    Install Condenser................1453
    Replace Evaporator................1455
    Replace Expansion Valve................1457
    Remove and Install Evaporator Temperature Sensor................1459
    Replace Low Pressure Switch................1460
    Replace High Pressure Switch................1461
    Replace Air Temperature Sensors................1462
  Group 15: Cab................1391
    Specifications................2400
    Remove and Install Cab Windshield................1465
    Remove Cab................1473
    Install Cab................1482
    Replace Rear Window................1490
    Remove and Install Cab Outer Roof................1491
    Remove and Install Cab Inner Roof................1493
    Remove and Install Cab Headliner................1499
    Remove and Install Operator's Seat................1501
    Remove and Install Armrest Control Pivot................1506
    Remove and Install Operator Presence Switch................1508
    Operator Seat—Exploded View................1510
    Operator Seat Air Suspension Assembly—Exploded View................1512
    Disassemble and Assemble Operator Seat Air Suspension Assembly................1514
    Remove and Install Cab Door................1519
    Disassemble and Assemble Cab Door................1520
    Cab Door Latch Striker................1522
Section 110: Feeder House Repair................1524
  Group 05: Conveyor................1524
    Other Material................2399
    Specifications................2400
    Remove and Install Feeder House................1530
    Feeder House Conveyor Chain—Adjust (Style A)................1532
    Feeder House Conveyor Chain—Adjust (Style B)................1534
    Remove and Install Conveyor Chain................1535
    Measure Conveyor Chain Wear................1538
    Removing Conveyor Chain Link................1539
    Replace Conveyor Chain Slats................1541
    Replace Conveyor Chain Wear Strips................1543
    Adjust Drum Height................1546
    Remove and Install Conveyor Drum—Style A................1547
    Remove and Install Conveyor Drum—Style B................1551
    Remove and Install Sub-Floor Assembly................1555
    Remove and Install Mid-Floor Assembly—Style A................1557
    Remove and Install Mid-Floor Assembly—Style B................1559
    Single Point Latching Level Land—Exploded View................1560
    Remove and Install Feed Plate................1562
    Adjust Feed Plate Assembly................1565
    Feed Plate Support—Exploded View................1567
  Group 10: Top Shaft And Slip Clutch................1524
    Essential Or Recommended Tools................1570
    Other Material................2399
    Specifications................2400
    Remove Top Shaft Slip Clutch................1573
    Disassemble and Assemble Top Shaft Slip Clutch................1575
    Install Top Shaft Slip Clutch................1580
    Remove and Install Top Shaft Supports................1582
    Disassemble and Assemble Top Shaft................1588
  Group 15: Feeder House Drives and Reverser Gear Case................1524
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Remove and Install Variable Drive Countershaft................1604
    Disassemble and Assemble Upper Variable Drive Countershaft................1616
    Disassemble and Assemble Standard Capacity Fixed Speed Countershaft................1626
    Remove, Repair and Install Variable Drive Sheaves and Cams—Style A................1628
    Remove, Repair and Install Variable Drive Sheaves and Cams—Style B................1635
    Remove and Install Multi-Speed Feeder House Countershaft................1647
    Remove and Install Fixed Drive Sheave................1650
    Remove and Install Reverser Gear Case................1652
    Remove and Install Oil Cooler................1654
    Feeder House Reverser Gear Case—Exploded View................1656
    Disassemble and Assemble Feeder House Reverser Gear Case................1658
    Disassemble and Assemble Reverser Gear Case Oil Pump................1675
    Remove and Install Reverser Shift Piston................1681
    Remove and Install Lower Shaft................1685
    Disassemble and Assemble Fixed Speed Drive Tightener................1688
    Disassemble and Assemble Conveyor Drive Chain, Tightener and Guides................1690
    Feeder House Variable Speed Belt—Adjustment................1692
    Replace Variable Speed Feeder House Belt................1697
    Remove and Install Feeder House Multi-Speed Drive Belt................1701
    Replace and Adjust Fixed Speed Feeder House Belt................1703
  Group 20: Lateral Tilt Cylinder................1525
    Lateral Tilt CylinderHoses and Fittings................1525
    Lateral Tilt Cylinder—Exploded View................1706
    Remove and Install Lateral Tilt Cylinder................1707
  Group 25: Lateral Tilt Frame................1525
    Other Material................2399
    Specifications................2400
    Lateral Tilt Frame and Beam................1712
    Remove and Install Lateral Tilt Frame................1714
    Remove and Install Lateral Tilt Beam................1718
    Adjust Single Point Latching................1723
    Lateral Tilt Beam with Single Point Latching................1726
    Adjust Fore-Aft Turnbuckles................1727
    Remove Fore-Aft Tilt Frame................1729
    Install Fore-Aft Tilt Frame................1732
  Group 30: Five Speed Feeder House Drive Gear Case................1526
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    General Repair Procedures—Five Speed Gear Case................1747
    Remove and Install Five Speed Feeder House Drive Gear Case................1749
    Cross-Sectional View—Five Speed Feeder House Drive Gear Case................1754
    Cross-Sectional View—Gear Case Output Shaft................1756
    Cross-Sectional View—Gear Case Countershaft................1758
    Disassemble Five Speed Feeder House Drive Gear Case................1760
    Disassemble and Assemble Gear/Clutch Assemblies................1768
    Assemble Five Speed Feeder House Drive Gear Case................1774
Section 120: Separator................1786
  Group 05: Separator Repair................1786
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Remove And Install Feed Accelerator And Shaft................1803
    Remove and Install Feed Accelerator Wear Strips................1812
    Remove And Install Separator Top Covers................1814
    Remove And Install Separator Rails................1819
    Remove And Install Rotor Front Bearing................1830
    Remove and Install Stone Trap Door................1836
    Remove And Install Rotor................1838
    Replace Rear Bulkhead (Rotor Drive Gear Case Support)................1845
    Remove And Install Rotor Torque Sensing—Driven................1846
    Disassemble And Assemble Rotor Torque Sensing—Driven................1850
    Remove and Install Rotor Drive Gear Case................1861
    Disassemble and Assemble Rotor Drive Gear Case................1865
    Remove And Install Discharge Beater Grate Section................1872
    Remove And Install Discharge Beater Grate Frame................1877
    Remove And Install Discharge Beater................1883
    Remove and Install Discharge Beater Drive Hub................1893
    Remove and Install Discharge Beater Housing................1895
    Remove And Install Separator Grates................1900
    Remove and Install Concave Sections................1902
    Adjust Concave Level................1911
    Remove And Install Concave Adjusting Motor................1917
    Remove And Install Concave Adjusting Tube................1918
    Remove and Install Front Bulkhead................1924
    Remove and Install Center Bulkhead................1927
    Repair Separator Rotor Shell................1931
    Remove And Install Threshing Elements And Tines................1932
    Threshing Element and Separator Tine Location (9570)................1934
    Threshing Element And Separator Tine Location (15 Element Configuration)................1935
    Threshing Element and Separator Tine Location (24 Element Dense Pack Configuration)................1937
    Remove And Replace RIVNUT Threaded Inserts................1939
    Remove And Install Rotor Feed Flights................1942
    Static Balance Rotor................1945
    Aligning Rotor Drive Bulkhead................1949
  Group 10: Separator Drives................1787
    Essential or Recommended Tools................2396
    Specifications................2400
    Remove and Install Right-Hand Front Jackshaft................1956
    Remove and Install Right-Hand Rear Jackshaft................1959
    Remove and Install Primary Countershaft Bearing................1964
    Remove and Install Primary Countershaft—Style A................1967
    Remove and Install Primary Countershaft—Style B................1971
    Remove and Install Primary Drive Shafts—Style A................1974
    Remove and Install Primary Drive Shafts—Style B................1980
    Replace Drive Shaft Carrier Bearing—Style A................1986
  Group 15: Residue Disposal................1787
    Service Equipment and Tools................1990
    Other Material................2399
    Specifications................2400
    Straw Chopper Housing................1993
    Remove Straw Chopper................1996
    Remove and Install Chopper Raise/Lower Actuator................2000
    Install Straw Chopper................2002
    Chopper Blades—Replacement and Configuration (9570 STS)................2006
    Chopper Blades—Replacement and Configuration (9670, 9770 and 9870 STS)................2011
    Replace Knife Blades................2015
    Remove and Install Easy Adjust Knife Bank................2016
    Remove and Install Crop Diverter................2018
    Replace Left-Hand Chopper Rotor Bearing................2021
    Replace Right-Hand Chopper Rotor Bearing................2025
    Remove Straw Chopper Drive Jackshaft—Style A................2027
    Install Straw Chopper Drive Jackshaft—Style A................2031
    Remove and Install Straw Chopper Drive Jackshaft—Style B................2035
    Powered Tailboard—Exploded View................2043
    Remove and Install Powered Tailboard Blades................2045
    Remove Straw Spreader................2047
    Disassemble and Assemble Straw Spreader................2051
    Install Straw Spreader................2055
  Group 20: Conveyor Augers, Cleaning Fan and Chaffer and Sieve Frame................1788
    Other Material................2399
    Specifications................2400
    Remove And Install Conveyor Auger Drive Shaft................2062
    Remove And Install Conveyor Augers................2067
    Remove and Install Conveyor Auger Trough................2070
    Remove And Install Conveyor Auger Slip Clutch................2073
    Remove and Install Conveyor Auger Bulkhead................2075
    Remove And Install Cleaning Fan Sheave And Bearing................2077
    Fan Drive Speed Control................2084
    Remove Cleaning Fan Drive................2086
    Disassemble and Assemble Cleaning Fan Drive Jackshaft................2090
    Install Cleaning Fan Drive................2091
    Adjust Fan Speed Actuator................2095
    Remove And Install Cleaning Fan................2096
    Remove And Install Cleaning Fan Blade Inserts................2103
    Remove And Install Chaffer/Sieve Frame Clevis—Self-Leveling Shoe................2106
    Remove And Install Chaffer................2108
    Remove And Install Chaffer With Remote Shoe................2113
    Remove And Install Chaffer/Sieve—Self-leveling Shoe................2116
    Remove And Install Sieve................2129
    Remove And Install Sieve With Remote Shoe................2132
    Remove And Install Chaffer/Sieve Rear Channel Assembly—Self-Leveling Shoe................2134
    Remove And Install Remote Shoe Actuator Motor................2138
    Remove And Install Remote Shoe Actuator Motor—Self-Leveling Shoe................2140
    Remove And Install Chaffer/Sieve Tilt Actuator Motor—Self-Leveling Shoe................2142
    Remove And Install Front Chaffer Element................2144
    Remove And Install Front Chaffer Element—With Chaffer Extension................2146
    Remove And Install Chaffer Frame—Without Self-Leveling Shoe................2149
    Remove And Install Chaffer Frame—With Self-Leveling Shoe................2152
    Remove And Install Sieve Frame—Without Self-Leveling Shoe................2155
    Remove And Install Sieve Frame—With Self-Leveling Shoe................2157
    Remove And Install Shake Pan................2160
    Remove And Install Shoe Pitman Arms................2164
  Group 25: Tailings Elevator And Augers................1789
    Specifications................2400
    Remove and Install Tailings Paddle Chain................2172
    Remove and Install Tailings Paddle................2174
    Remove Lower Tailings Auger................2175
    Install Lower Tailings Auger................2179
    Remove Upper Tailings Auger................2183
    Install Upper Tailings Auger................2186
    Remove Tailings Elevator................2188
    Install Tailings Elevator................2197
  Group 30: Primary Countershaft Gear Case................1789
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Remove and Install Primary Countershaft Gear Case................2210
    Disassemble and Assemble Primary Countershaft Gear Case................2212
  Group 35: Header Electromagnetic Clutch................1789
    Specifications................2400
    Remove Header Electromagnetic Clutch................2224
    Header Electromagnetic Clutch—Exploded View................2226
    Install Header Electromagnetic Clutch................2227
Section 130: Grain Tank And Unloading System Repair................2230
  Group 05: Grain Tank Cross Augers................2230
    Remove Grain Tank Cross Augers (Regular Unload Rate)................2236
    Install Grain Tank Cross Augers (Regular Unload Rate)................2240
    Remove Grain Tank Cross Augers (High Unload Rate)................2244
    Install Grain Tank Cross Augers (High Unload Rate)................2248
  Group 10: Unloading Auger System Drives................2230
    Specifications................2400
    Remove and Install Unloading Auger Drive Belt................2254
    Remove and Install Unloading Auger Drive Countershaft................2255
  Group 15: Vertical Unloading Auger And Lower Gear Case................2230
    Essential or Recommended Tools................2396
    Specifications................2400
    Remove Vertical Auger Lower Gear Case and Vertical Auger................2261
    Disassemble and Assemble Vertical Auger Lower Gear Case................2265
    Install Vertical Auger and Vertical Auger Lower Gear Case................2274
  Group 20: Horizontal Unloading Auger And Gear Case................2230
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    Inspection of Horizontal Unloading Auger................2283
    Horizontal Unloading Auger—Regular Unload Rate................2284
    Horizontal Unloading Auger—High Unload Rate................2286
    Remove and Install Unloading Auger Grain Saver Door................2288
    Remove Horizontal Auger................2289
    Install Horizontal Auger................2291
    Folding Horizontal Auger Housing—Exploded View................2294
    Folding Horizontal Auger—Exploded View................2296
    Folding Horizontal Auger Pivot—Exploded View................2298
    Remove and Install Folding Auger Actuator................2300
    Remove and Install Outer Folding Auger Assembly................2301
    Remove and Install Folding Auger Rings................2303
    Remove Rear Horizontal Folding Auger................2304
    Remove Front Horizontal Folding Auger................2305
    Install Front Horizontal Folding Auger................2307
    Install Rear Horizontal Folding Auger................2310
    Remove Horizontal Auger Gear Case................2311
    Disassemble And Assemble Horizontal Unloading Auger Gear Case................2313
    Install Horizontal Auger Gear Case................2318
    Remove Horizontal Unloading Auger Tube................2319
    Install Horizontal Unloading Auger Tube................2320
    Unloading Auger Elbow—Exploded View................2321
    Remove Horizontal Auger Elbow................2323
    Install Horizontal Auger Elbow................2329
    Remove Unloading Auger Charge Housing................2334
    Install Unloading Auger Charge Housing................2338
  Group 25: Clean Grain Elevator................2231
    Other Material................2399
    Specifications................2400
    Adjust Clean Grain Elevator Chain................2344
    Remove and Install Clean Grain Paddle Chain................2346
    Remove and Install Clean Grain Paddle................2348
    Remove Clean Grain Elevator................2349
    Install Clean Grain Elevator................2357
    Remove and Install Clean Grain Elevator Gear Case................2364
    Disassemble and Assemble Clean Grain Elevator Gear Case................2366
    Remove and Install Clean Grain Loading Auger................2373
    Replace Clean Grain Loading Auger Bearing................2375
    Remove and Install Lower Clean Grain Auger................2376
  Group 30: Grain Tank And Extensions................2231
    Grain Tank................2386
    Grain Tank Extensions................2389
Section 140: Engine Gear Case And Control Valve Repair................2392
  Group 05: Engine Gear Case And Valve................2392
    Essential or Recommended Tools................2396
    Other Material................2399
    Specifications................2400
    General Information................2402
    Remove and Install Engine Gear Case................2403
    Engine Gear Case Specifications................2414
    Remove and Install Rotor Variable Drive................2416
    Disassemble and Assemble Rotor Variable Drive................2420
    Remove and Install Rotor Variable Drive Shaft................2431
    Remove and Install Transfer Gear Case................2433
    Disassemble and Assemble Transfer Gear Case................2438
    Disassemble and Assemble Separator Drive Wet Clutch................2442
    Disassemble and Assemble Hydrostatic Gear Set................2454
    Set Gear Position................2456
    Preload Bearings................2469
    Disassemble and Assemble Straw Chopper/Unloading System................2462
    Set Separator Gear Position................2467
    Preload Bearings................2469
    Disassemble and Assemble Separator Drive................2471
    Preload Separator Drive Bearings................2474
    Set Separator Drive Gear Backlash................2476
    Disassemble and Assemble Hydrostatic Pump Drive................2477
    Preload Hydrostatic Pump Drive Bearings................2479
    Set Hydrostatic Pump Drive Gear Backlash................2480
    Disassemble and Assemble Oil Screen................2481
    Disassemble and Assemble Oil Trough................2482
    Disassemble and Assemble Dipstick Tube................2484
    Remove and Install Filter................2485
    Remove and Install Pressure Regulating Valve................2486
    Disassemble and Assemble Pressure Regulating Valve................2488
Section 199: Dealer Fabricated Tools................2495
  Group 05: Dealer Fabricated Tools................2495
    DFRW20—Compressor Holding Fixture................2497
    DFHXT1—Split Ring Tool................2498
    DFHXT3—Swash Plate Holding Tool................2499
    DFHXT4—Split Ring Tool................2501
    DFHXT5—Shrink Ring Installation Tool................2502

John Deere Combines 9570 STS, 9670 STS, 9770 STS, 9870 STS Repair Service Manual (TM101919)