Complete digital official shop manual contains service, maintenance, and troubleshooting information for the Mercedes-Benz SLK280/SLK300 2004-2011. Diagnostic and repair procedures are covered in great detail to repair, maintain, rebuild, refurbish or restore your vehicle like a professional mechanic in local service/repair workshop. This cost-effective quality manual is 100% complete and intact as should be without any missing pages. It is the same factory shop manual used by dealers that guaranteed to be fully functional to save your precious time.

This manual for Mercedes-Benz SLK280/SLK300 2004-2011 is divided into different sections. Each section covers a specific component or system and, in addition to the standard service procedures, includes disassembling, inspecting, and assembling instructions. A table of contents is placed at the beginning of each section. Pages are easily found by category, and each page is expandable for great detail. It is in the cross-platform PDF document format so that it works like a charm on all kinds of devices. You do not need to be skilled with a computer to use the manual.

EXCERPT:
ENGINE
Air Intake, Turbo Charging - 171 Chassis
BASIC KNOWLEDGE
VARIABLE INTAKE MANIFOLD SWITCHOVER VALVE, COMPONENT DESCRIPTION
Variable intake manifold switchover valve, component description (engine 113)
ENGINE 113
Fig. 1: Locating Variable Intake Manifold Switchover Valve
The variable intake manifold switchover valve is located at the front to the left of the variable intake manifold.
Task
The variable intake manifold switchover valve discharges the variable intake manifold vacuum capsule for the purpose of intake manifold switchover with vacuum pressure and then ventilates the variable intake manifold vacuum capsule.
Design
The variable intake manifold switchover valve is an electromagnetic switchover valve in plastic housing with a coil resistance of around 25ohms.
A valve plated operated by a coil armature switches between ambient pressure and the vacuum memory.
Function
Fig. 2: Identifying Variable Intake Manifold Function
N3/10 The variable intake manifold switchover valve is actuated on the earth side by the ME control unit through its own output stage. Supply voltage is provided by "circuit 87 M2e".
Component description for the variable intake manifold switchover valve (engine 272)
Shown on engine 272.963
Fig. 3: Identifying Variable Intake Manifold Switchover Valve - Shown On Engine 272.963
Location
The variable intake manifold switchover valve is mounted at the front of the variable intake manifold.
Task
Pressurize intake manifold switchover aneroid capsules with vacuum or admitting air.
Design
Electromagnetic switchover valve in the plastic housing, coil resistance approx. 30 t. Ventilation via cap.
Shown on engine 272.963
Fig. 4: Identifying Variable Intake Manifold Switchover Valve Design - Shown On Engine 272.963
Function
The variable intake manifold switchover valve is actuated on the earth side by the engine control unit through its own output stage.
The voltage is supplied through circuit 87.
A valve plate operated by a coil armature shifts between atmosphere and vacuum storage.
VARIABLE INTAKE MANIFOLD COMPONENT DESCRIPTION (ENGINE 113) - GF09.20-P-6002SM
ENGINE 113.986
ENGINE 113.987
ENGINE 113.988
ENGINE 113.989
...